Tacoma

“Dobinsons MRA59-A713 3-Way Adjustable Rear Shocks Pair | Sequoia 2008-2022” has been added to your cart. View cart

Showing 181–210 of 280 results

Sale!
Dobinsons
On Sale All November!!
Dobinsons C59-820 Front Coil Springs Pair
- Suits Toyota Land Cruiser 300 Series – Lifts 50mm – 2″ / Stock Load
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 445mm free height, 18mm wire diameter, 485 LBF/in spring rate
- Sold in Pairs
(0 reviews)
Original price was: $270.00.Current price is: $229.50. Select options
Sale!
On Backorder
Tacoma 4th Gen (2024+)
On Sale All November!!
ETA is Spring 2025
Dobinsons IMS59-60490 2.6″ IFP Front Struts Pair | 2024+ Tacoma
- Suits Toyota Tacoma 2024+
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- 22mm / 7/8″ shaft diameter on front struts
- Full 2 year limited warranty, no set rebuild time period
- Standard coil seat height should be set to 251mm (9.9″)from the center of the lower hole to the base notch where the coil sits
- SOLD IN PAIRS
- New Dobinsons Strut Mounts should be run with these for strength and longevity
(0 reviews)
Original price was: $720.00.Current price is: $612.00. Add to cart
Sale!
Dobinsons
On Sale All November!!
Dobinsons Rear Adjustable Panhard Rod for 2024+ Tacoma
- Suits Toyota Tacoma 2024+
- Replaces OE Rear Panhard Rod, adjustable to suit lift height
- Zinc plated steel and E-coated with high quality rubber bushes supplied
- Off-car adjustable, cannot be set while fully installed
- For 35mm (1.25″) of lift or more
- Rubber Bushes installed and offer greater flexibility than polyurethane, providing maximum articulation
- Panhard rod measures 41″ compressed and can be extended up to 44″ eye to eye
(0 reviews)
Original price was: $345.00.Current price is: $293.25. Add to cart
Sale!
Coil Springs
On Sale All November!!
Dobinsons C59-276B Front Lifted Coil Springs for Toyota 4×4 Trucks and SUV’s – Pair Black
- 3rd Gen 4Runner 4×4 (1996-2002) – Lifts 2″ on a stock to medium load front end
- Toyota Tacoma 4×4 1998 to 2004 – 1.5″ with stock weight
- Suits Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – BLACK
- 362mm free height, 586LBF/in spring rate
- Sold in Pairs
- Also offered in the Teal color
(0 reviews)
Original price was: $270.00.Current price is: $229.50. Add to cart
Sale!
Skid Plates, Sliders + Racks - Tacoma 4th Gen
Rear Control Arm Skids | 2024+ Tacoma
- Suits 2024+ Toyota Tacoma with coil spring rear suspension
- Protects the front of the rear lower control arm links and factory link mounts on the frame
- Smooth, flat surface that easily slides over obstacles
- Black powder coat included for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware and installation instructions provided
- Includes heavy duty hardware
- Kit includes both driver and passenger side lower link skids
- Confirmed Fitment on 24′ TRD OR only should fit all Tacoma models with rear coil suspension
- Made in USA
- Installation Instructions
(0 reviews)
Original price was: $134.99.Current price is: $128.00. Add to cart
New Item
Dirt King Fabrication
FREE SHIPPING
within 48 US States
Dirt King 2.5 Tacoma DCA Remote Resi Shocks | 2005-2023
- Suits Toyota Tacoma 2005-2023 4×4 and Prerunner
- Suits up to 1.5″ of lift
- Dual Compression Adjuster (DCA) is on the resi to fine tune the ride quality
- Dual Compression Adjusters with 10 adjustments for each knob
- Increased suspension travel
- Specific valving for each vehicle providing optimal ride comfort
- Aluminum body for cooler operation and corrosion resistance
- Remote reservoir equipped with dual compression adjusters allowing for high-speed and low-speed compression adjustments
- Less seal drag with the 3/4″ shafts compared to traditional 7/8″ shafts resulting in smoother operation
- Direct bolt-on replacement that uses factory shock mounting location
- Maxima custom oil blend. The proprietary light viscosity semi-synthetic oil blend is low friction and extremely resistant to high operating temperatures
- Completely rebuildable and serviceable. All tools and replacement parts can be purchased from Dirt King
- 2.5″ hard-anodized 6061 aluminum bodies
- Progressive valving
- Internal floating piston
- Induction-hardened 3/4″ shafts
- What’s Included:
  
  2.5 DCA shocks with remote reservoirs Pair
  
  Shock shaft boots
  
  Reservoir mounts
  
  All necessary mounting hardware
  
  Installation instructions
- Matching Front Coilovers
Rated 5.00 out of 5
(4 reviews)
$1,567.02 Add to cart
New Item
Dirt King Fabrication
FREE SHIPPING
within 48 US States
Dirt King 2.5 Tacoma DCA Remote Resi Coilovers | 2005-2023
- Suits Toyota Tacoma 2005-2023 4×4 and Prerunner
- Comes preset to 2.5″ of lift
- Dual Compression Adjuster (DCA) is on the resi to fine tune the ride quality
- Dual Compression Adjusters with 10 adjustments for each knob
- Increased suspension travel
- Specific valving for each vehicle providing optimal ride comfort
- Aluminum body for cooler operation and corrosion resistance
- Remote reservoir equipped with dual compression adjusters allowing for high-speed and low-speed compression adjustments
- Less seal drag with the 3/4″ shafts compared to traditional 7/8″ shafts resulting in smoother operation
- Direct bolt-on replacement that uses factory shock mounting location
- Maxima custom oil blend. The proprietary light viscosity semi-synthetic oil blend is low friction and extremely resistant to high operating temperatures
- Cold wound, high-tensile alloy steel coil springs that retain consistent rate and ride height
- Completely rebuildable and serviceable. All tools and replacement parts can be purchased from Dirt King
- 2.5″ hard-anodized 6061 aluminum bodies
- Progressive valving
- Internal floating piston
- Induction-hardened 3/4″ shafts
- Provides up to 3” of lift | Must be paired with aftermarket UCA
- Note: We do not recommend lifting the vehicle more than 3″. Excessive preload will reduce the ride quality
- What’s Included:
  
  2.5 DCA coilover shocks with remote reservoirs Pair
  
  Coils installed are 14” long, 700 LBF/in Spring Rate
  
  Sway bar relocation mounts with reservoir brackets
  
  Spanner wrench
  
  All necessary mounting hardware
  
  Installation instructions
  
  Installation video is down below
- Matching Rear Shocks
Rated 4.00 out of 5
(4 reviews)
$2,253.02 Add to cart
Dirt King Fabrication
FREE SHIPPING
within 48 US States
Dirt King 2.0 IFP Tacoma Mid Travel Package | Tacoma 2005-2023
- Suits Toyota Tacoma 2005-2023 4×4 and Prerunner
- Includes preassembled front Coilovers, Rear Shocks, and preassembled UCA’s
- Front comes preset to 2.5″ of lift with stock weight
- Increased suspension travel
- Vehicle specific valving providing optimal ride comfort
- Aluminum body for cooler operation and corrosion resistance
- Direct bolt-on replacement that uses factory shock mounting location
- Maxima custom oil blend. The proprietary light viscosity semi-synthetic oil blend is low friction and extremely resistant to high operating temperatures
- Cold wound, high-tensile alloy steel coil springs that retain consistent rate and ride height
- Completely rebuildable and serviceable. All tools and replacement parts can be purchased from Dirt King
- 2″ hard-anodized 6061 aluminum bodies
- Progressive valving
- Internal floating piston
- Induction-hardened 5/8″ shafts
- Provides up to 3” of front lift, rear shocks suit 1.5″ of lift
- Note: We do not recommend lifting the vehicle more than 3″. Excessive preload will reduce the ride quality
- What’s Included:
  
  2.0 Dirt King IFP Series coilovers Pair
  
  Coils installed are 14” long, 700 LBF/in Spring Rate
  
  2.0 Dirt King IPF Smooth Body Rear Shocks Pair
  
  Dirt King Tubular Ball Joint UCA’s
  
  Sway bar relocation mounts
  
  Spanner wrench to adjust height/preload
  
  All necessary mounting hardware
  
  Installation instructions
Rated 4.43 out of 5
(7 reviews)
$2,349.06 Select options
New Item
Dirt King Fabrication
FREE SHIPPING
within 48 US States
Dirt King 2.0 IFP Smooth Body Shocks Pair | Tacoma 2005-2023
- Suits Toyota Tacoma 2005-2023 2WD and 4WD
- Allows for up to 1.5″ lift
- Increased suspension travel
- Vehicle specific valving providing optimal ride comfort
- Aluminum body for cooler operation and corrosion resistance
- Direct bolt-on replacement that uses factory shock mounting location
- Maxima custom oil blend. The proprietary light viscosity semi-synthetic oil blend is low friction and extremely resistant to high operating temperatures
- Completely rebuildable and serviceable. All tools and replacement parts can be purchased from Dirt King
- 2″ hard-anodized 6061 aluminum bodies
- Progressive valving
- Internal floating piston
- Induction-hardened 5/8″ shafts
- What’s Included:
  
  2.0” IFP smooth body shocks Pair
  
  Shock shaft boots
  
  All necessary mounting hardware
  
  Installation instructions
- Matching front coilovers
Rated 4.00 out of 5
(4 reviews)
$538.02 Add to cart
On Backorder
New Item
Dirt King Fabrication
FREE SHIPPING
within 48 US States
Dirt King 2.0 IFP Tacoma Coilovers Pair | Tacoma 2005-2023
- Suits Toyota Tacoma 2005-2023 4×4 and Prerunner
- Comes preset to 2.5″ of lift with stock weight
- Increased suspension travel
- Vehicle specific valving providing optimal ride comfort
- Aluminum body for cooler operation and corrosion resistance
- Direct bolt-on replacement that uses factory shock mounting location
- Maxima custom oil blend. The proprietary light viscosity semi-synthetic oil blend is low friction and extremely resistant to high operating temperatures
- Cold wound, high-tensile alloy steel coil springs that retain consistent rate and ride height
- Completely rebuildable and serviceable. All tools and replacement parts can be purchased from Dirt King
- 2″ hard-anodized 6061 aluminum bodies
- Progressive valving
- Internal floating piston
- Induction-hardened 5/8″ shafts
- Provides up to 3” of lift | Must be paired with aftermarket UCA
- Note: We do not recommend lifting the vehicle more than 3″. Excessive preload will reduce the ride quality
- What’s Included:
  
  2.0 Dirt King IFP Series coilovers Pair
  
  Coils installed are 14” long, 700 LBF/in Spring Rate
  
  Sway bar relocation mounts
  
  Spanner wrench to adjust height/preload
  
  All necessary mounting hardware
  
  Installation instructions
Rated 4.50 out of 5
(4 reviews)
$1,175.02 Select options
Full Suspension Kits - Tacoma 3rd Gen
FREE SHIPPING
within 48 US States
Front Tacoma Long Travel Kit | Toyota Tacoma 2005-2023
- Suits Toyota Tacoma 2005-2023 2WD and 4WD
- Adds 3.5″ of width to either side for a total of 7″ total track width added!!!
- 4WD requires long travel axle shafts or full axle assemblies
- Wheel Travel Specs, Tire Size and Shock recommendations are down below
- Bolt on application, minimal modifications required
- Utilizes American made FK bearings
- 4130 chromoly uniball cups
- Choice of ¾” heims or poly bushings for the UCA’s
- Delrin bushings for the LCA’s
- Zinc plated inner bushing sleeves
- Grease fittings for easy servicing
- 3/16″ and 1/8” boxed plate construction
- Internally ribbed with extrusions for weight reduction
- Bump stop plating
- Limit strap tabbing
- Bypass Tabbing
- To achieve the full amount of travel on 4WD models you must install a 1” diff drop kit and machine the inner CV’s for more articulation
- MADE IN THE USA
Rated 4.57 out of 5
(7 reviews)
$3,429.02 Select options
Leaf Springs - Tacoma 1st Gen
OMESB121 Tacoma Leaf Spring Bushing Kit | 1998-2004 Tacoma
- Suits 1998-2004 Toyota Tacoma 4×4 and Prerunner
- 1 kit fits both ends of ONE leaf spring (the fixed end and the shackle end top and bottom)
- Each kit comes with as pictured
- Order 2 kits to replace the bushings in 2 leaf springs
- Polyurethane bushings with steel sleeves
- Color: Yellow
- Material: Polyurethane
- Includes Shackle Bushing: Yes
- Includes Spring Pad Bushings: Yes
- Includes Sleeve: Yes
- Includes Hardware: No
- Estimated Install Time (Hours): 2
Rated 4.89 out of 5
(9 reviews)
$26.00 Add to cart
Leaf Springs - Tacoma 1st Gen
OME EL122RB 2.25″ Leaf Spring for Toyota Tacoma 1998-2004
- Suits Toyota Tacoma 1st Gen 1998-2004 (will not fit the 1996 or 1997 models)
- Lifts 2.25″ over stock height
- This is the EL122RB – which is the sjhorter side and usually mounts onto the passenger side
- Draw-tapered and diamond cut leaves
- Bolted leaf clamps allow installation of anti-squeak nylon liners
- Fully scragged to reduce the risk of sagging
- Load tested to ensure the spring meets the required specification
- Military wrap design provides added safety
- Re-greasable nylon interleaf anti-friction pads reduce friction at the leaf tips
- Flat axle seat area allows a positive, safe axle mount and reduces spring stress
- Shot peened to reduce spring stress and increase spring life
- Two-stage leaf pack featured on most rear springs for optimum comfort
- Color: Black
- Weight: 26.2 kg
- Material: Steel
- Spring Rate: 120 / 283 lbf/in
- Eye Diameter: 40 mm (F) / 40 mm (R)
- Number Of Leaves: 5+2
- Primary Free Camber: 189 mm
- Warranty: 3 YR
- The other side leaf spring as well as Bushings and U-Bolts are sold separately
Rated 4.91 out of 5
(11 reviews)
$243.00 Add to cart
Leaf Springs - Tacoma 1st Gen
OME EL122RA 2.25″ Leaf Spring for Toyota Tacoma 1998-2004
- Suits Toyota Tacoma 1st Gen 1998-2004 (will not fit the 1996 or 1997 models)
- Lifts 2.25″ over stock height
- This is the EL122RA – which is the taller side and usually mounts onto the driver’s side
- Draw-tapered and diamond cut leaves
- Bolted leaf clamps allow installation of anti-squeak nylon liners
- Fully scragged to reduce the risk of sagging
- Load tested to ensure the spring meets the required specification
- Military wrap design provides added safety
- Re-greasable nylon interleaf anti-friction pads reduce friction at the leaf tips
- Flat axle seat area allows a positive, safe axle mount and reduces spring stress
- Shot peened to reduce spring stress and increase spring life
- Two-stage leaf pack featured on most rear springs for optimum comfort
- Color: Black
- Weight: 26.2 kg
- Material: Steel
- Spring Rate: 120 / 283 lbf/in
- Eye Diameter: 40 mm (F) / 40 mm (R)
- Number Of Leaves: 5+2
- Primary Free Camber: 204 mm
- Warranty: 3 YR
- The other side leaf spring as well as Bushings and U-Bolts are sold separately
Rated 5.00 out of 5
(5 reviews)
$243.00 Add to cart
Sale!
Shocks + Struts - Tacoma 3rd Gen
On Sale All November!!
Dobinsons IMS Shock Kit for Tacoma 2005-2023
- Dobinsons IMS Monotube Strut and Shock Absorber Kit – Front and Rear
- Suits 2005-2023 Toyota Tacoma’s
- Complete kit of 2 Front Struts and 2 Rear Shocks
- Height Adjustable: Yes, fronts
- Reservoir: Internal
- Finish: Corrosion resistant (EDP Surface Protection)
- Body Design: 56mm OD
- Rod: Double Chrome 18mm
- Piston: Race inspired hi-flow CNC 6061 Billet alloy
- Oil: High Quality Fuch’s Oil from Germany
- Seals: Heavy Duty 3 Stage FKM HNBR Sealing System
- Rings: Teflon Piston Rings
- Bushings: Natural Rubber
- Internal Design: IFP (Internal Floating Piston) Monotube
- Boot Included: Yes
- Bushings Included: Yes, top and bottom, front and rear
- IMS59-50220 specs – 22.3″ extended, 16.4″ compressed
- IMS59-50940 specs – 24.2″ extended, 14.2″ compressed
- Reuse original coil springs or buy new Dobinsons springs
- Full 2 year limited warranty, no set rebuild time period
Rated 5.00 out of 5
(13 reviews)
Original price was: $1,230.00.Current price is: $1,045.50. Select options
Full Suspension Kits - Tacoma 4th Gen
FREE SHIPPING
within 48 US States
Icon 2024 Toyota Tacoma Suspension Kit 1.25-3″ Lift – Stage 1
- Suits 2024+ Toyota Tacoma 4×4
- Vehicle specific tuned front and rear shocks for superior shock damping and control
- Increased wheel travel and improved ride quality over stock
- Front differential drop provides better maximum operating angle for CV joints and maximizes available wheel travel on 4WD models
- Adjustable coilovers provide 1.25-3″ front lift height over stock
- Included rear shocks are compatible with 0-1″ of rear lift over stock
- 6061 aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated coilover shock bodies with 7/8″ shafts
- ICON engineered coil springs
- FK Rod End bearings for extended longevity and minimal deflection
- 2.0 Aluminum Series internal reservoir rear shocks with 5/8″ shafts
- This kit is configured for fitment on 4WD models. If installing onto a 2WD 2024 Toyota Tacoma SR, SR5, or TRD Sport, front differential drop kit part number 55160 is not needed and the other suspension system components can be ordered individually with full system functionality
- Will not fit 2024 Toyota Tacoma TRD PreRunner or 2024 Toyota Tacoma Limited AWD
(0 reviews)
$2,089.80 Select options
Overland Vehicle Systems (OVS)
FREE SHIPPING
within 48 US States
LD TACT Truck Bed Tent – Mid-Size Truck 5.0FT Bed
- For Mid-Size Truck Beds measuring 5.0-5.2 FT in length
- For Vehicles such as Chevy Colorado, Ford Ranger, GMC Canyon, Nissan Frontier, Toyota Tacoma
- 2-3 Person Design with Spacious Interior and Headroom
- Perimeter Skirt and Reinforced Floor Keeps Truck Bed Dry
- Color Coated Poles for Quick Deployment
- Large Windows with Mesh Allows for Ventilation
- Premium 420D Material with Removable Rainfly
- Padded Elastic Anchor Points for Easy Scratch-Free Fit
- Compact Carrying Bag is Included
- Internal Storage Options
- Setup Instructions
- This truck bed tent style is made in 3 sizes, 5FT, 5.5FT and 6.0FT Truck Beds
Rated 5.00 out of 5
(3 reviews)
$129.99 Add to cart
Add-a-Leaf
Icon 1.5″ AAL Add-A-Leaf Set | 1996-2023 Tacoma 2000-2006 Tundra
- Suits 1996-2004 and 2005-2023 Toyota Tacoma 4×4 and Pre-Runner, and 1999-2006 Toyota Tundra
- Provides 1.5” of lift on stock weight rear end
- Lowers rear spring rate for smoother ride quality
- Uses high-quality progressive rate, lifetime guaranteed leaf springs
- Includes U-bolts and required hardware
- Installation is easy, using common socket wrench, torque wrench, and cut-off wheel
- Installation Guide
Rated 5.00 out of 5
(7 reviews)
$227.95 Add to cart
Icon
FREE SHIPPING
within 48 US States
Icon 2.5″ VS Coilovers Pair | 00-06 Tundra 01-07 Sequoia
- Suits 2000-2006 Toyota Tundra and 2001-2007 Toyota Sequoia 4WD
- Sold as a Pair
- Vehicle specific tuned for superior shock damping, vehicle control, and improved ride quality over stock
- Vehicle specific shock length and pairing with front differential drop yields maximum wheel travel
- Height-adjustable coilovers offer 0-3″ of lift height adjustment over stock
- 2.5″ diameter shock bodies with internal reservoirs for consistent performance
- ICON engineered coil springs
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated shock bodies with 7/8″ diameter shafts
- FK rod end bearings for extended longevity and minimal deflection
- Fully rebuildable and re-tunable
- Aftermarket UCA’s should be run with any lift height of 2″ or more
- DOWNLOAD INSTALLATION GUIDE
Rated 5.00 out of 5
(6 reviews)
$1,459.95 Add to cart
Control Arms - Tundra 2022+
FREE SHIPPING
within 48 US States
Icon Billet Adjustable Toyota Track Bar | 22+ Tundra 23+ Sequoia 24+ Tacoma
- Suits 2022-2024+ Tundra and 2023-2024+ Sequoia and 2024+ Tacoma 4×4 Models
- Vehicle specific design
- Helps to free up bind during rear suspension travel and articulation
- Heavy duty PTFE-lined FK Rod Ends offer minimal deflection and maximum articulation
- On-vehicle adjustable for precise track alignment
- CNC machined 6061 aluminum bar
- Satin anodized finish to match appearance of ICON rear upper and lower links
- Covered by ICON’s Limited Lifetime Warranty
- Installation Guide
- Warranty Info
Rated 5.00 out of 5
(10 reviews)
$419.95 Add to cart
Tacoma 4th Gen (2024+)
FREE SHIPPING
within 48 US States
Icon Billet UCA DJ Pro Pair for 2024+ Tacoma + Land Cruiser 250
- Suits 2024+ Toyota Toyota Tacoma and Land Cruiser 250
- CNC machined 6061 billet aluminum construction with satin anodized finish
- Corrects suspension geometry and allows for proper wheel alignment on Tacomas or Land Cruisers with up to 3” of lift
- Quick, precise, on-vehicle adjustment for both caster and camber
- Delta Joint PRO allows maximum articulation without binding
- Delta Joint PRO is 100% serviceable and rebuildable
- FK Rod Ends at chassis pivots for strength and precision driving characteristics
- Built in O-ring sealed dust cover cap
- Installation Manual
- Warranty Info
(0 reviews)
$1,399.95 Add to cart
Upper Control Arms
FREE SHIPPING
within 48 US States
Icon Tubular UCA DJ Pro Pair for 2024+ Tacoma + Land Cruiser 250
- Suits 2024+ Toyota Toyota Tacoma and Land Cruiser 250
- Features patented ICON Delta Joint (U.S. Pat. 10,731,700)
- Built in added caster for better handling on lifted vehicles
- Delta Joint PRO allows maximum articulation without binding
- Delta Joint PRO is 100% serviceable and rebuildable
- Serviceable dual stage polyurethane pivot bushings
- CNC machined housings for bushings and Delta Joint PRO
- 1026 DOM tube construction with black powder coat finish
- Includes billet dust caps for Delta Joint PRO
- Warranty Info
(0 reviews)
$849.95 Add to cart
RCV Axles
FREE SHIPPING
within 48 US States
RCV Ultimate IFS CV Axle Set | Tacoma 96-04 & 4Runner 96-02
- Suits Toyota 4Runner 1996-2002, Toyota Tacoma 1995.5-2004, Toyota Hilux Surf 1996-2002, Toyota Prado 90 Series 1996-2002
- Suits Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- Does NOT fit manual locking hub versions
- Standard length for use on lifted and non-lifted applications
- RCV Ultimate IFS CV Axles for Independent Front Suspension are designed to overcome the limitations of Toyota Tacoma and 4Runner IFS axle shafts
- Ultimate IFS CV Axles provide increased strength that original equipment axle shafts just can’t match
- Even if you have big tires and big power there are no worries
- Ultimate IFS CV Axles are low maintenance, and are backed with a “No Questions Asked” limited lifetime warranty against breakage
- Warranty Form
- Our IFS CV axles meet and exceed the strength of a straight axle swap, while allowing you to maintain the traction, smoothness and control of your IFS
- The axles feature a double-offset inboard CV joint that is comprised by .8415″ balls and 300M internal components
- The outboard CVs utilize our Dana 60 architecture with combination of 4340 & 300M components optimized for maximum strength
- The center bar is 30 spline 4340
- The RCV developed moly SPEC grease is used in the CVs to control heat build-up in even the most extreme use environments
- Black oxide coating is standard
- Sold as a pair
- Made in the USA
Rated 5.00 out of 5
(9 reviews)
$2,299.95 Add to cart
RCV Axles
FREE SHIPPING
within 48 US States
RCV Ultimate IFS CV Axle Set | Tacoma 4Runner FJ Cruiser GX470 GX460
- Suits Toyota FJ Cruiser 2007-2014, 4Runner 2003-23, Tacoma 2005-2023, Lexus GX460 2010-2023 & Lexus GX470 2003-2009
- Standard length for use on lifted and non-lifted applications
- RCV Ultimate IFS CV Axles for Independent Front Suspension are designed to overcome the limitations of Toyota FJ Cruiser, 4 Runner, Tacoma, Lexus GX460 and Lexus GX470 IFS axle shafts
- Ultimate IFS CV Axles provide increased strength that original equipment axle shafts just can’t match
- Even if you have big tires and big power there are no worries
- Ultimate IFS CV Axles are low maintenance, and are backed with a “No Questions Asked” limited lifetime warranty against breakage
- Warranty Form
- Our IFS CV axles meet and exceed the strength of a straight axle swap, while allowing you to maintain the traction, smoothness and control of your IFS
- The axles feature a double-offset inboard CV joint that is comprised by 1-inch balls and 300M internal components
- The outboard CVs utilize our Dana 60 architecture with combination of 4340 & 300M components optimized for maximum strength
- The center bar is 35 spline 300M, the strongest in the industry
- The RCV developed moly SPEC grease is used in the CVs to control heat build-up in even the most extreme use environments
- Black oxide coating is standard
- Sold as a pair
- Made in the USA
Rated 5.00 out of 5
(9 reviews)
$2,299.95 Add to cart
Sale!
On Backorder
Dobinsons
On Sale All November!!
Dobinsons UCA Ball Joint for Tacoma Hilux and Fortuner
- Suits Dobinsons UCA’s that fit Toyota Tacoma 2nd and 3rd Gen, Toyota Fortuner 2005-2023, Toyota Hilux 2005-2023
- This ball joint will fit UCA part numbers UCA59-003K, UCA59-203K
- Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
- Sold individually
- Includes new ball joint, boot, split pin and nut (subject to design changes)
Rated 5.00 out of 5
(6 reviews)
Original price was: $70.00.Current price is: $59.50. Add to cart
Tacoma 1st Gen (1996-2004)
Tacoma 2.7L Exhaust Header – 1995-1998 Toyota Tacoma 2.7L 4 Cylinder
- Suits Toyota Tacoma 2.7L 4 Cylinder from 1995 to 1998
- Polished, 1/16” thick stainless steel tubes going into a ½” thick header-to-head mounting flange
- TIG welded and polished
- Comes with all gaskets and hardware
- Stainless steel full-band exhaust clamp
- Smog legal in California, making it legal in all 50 states
- Installation Instructions
Rated 5.00 out of 5
(9 reviews)
$547.00 Add to cart
Sale!
MRA Remote Resi 3-Way Adjustable Monotube
FREE SHIPPING
within 48 US States
On Sale All November!!
Dobinsons 2.6″ 3-Way Adjustable Front Long Travel Coilovers Pair | Toyota & Lexus
- Dobinsons Long Travel Coilovers for the front of Toyota and Lexus Trucks and SUV’s
- Intended to be used on 4th and 5th Gen 4Runners, Lexus GX470 and GX460, FJ Cruisers, and Toyota Tacoma 2nd and 3rd Gens – with all Long Travel Parts Installed (upper and lower arms, axles, custom bump stops, limit straps, etc)
- Includes Different bolt pattern adapters for Top mount plate
- Specifications: 602mm (23.7″) extended, 399 mm (15.7″) compressed, uses 1.5″ long x 1/2″ Bolt for lower mounting
- Pair of Coilover Struts only, no coils included
- Height adjustable with a fully threaded body
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Does not include coil springs – sold separately
- These can only be run with aftermarket UCA’s for coilover clearance and full long travel lower arms – they will not work with OEM sized upper or lower arms
- Recommended Coils to run with these:
  
  C92-3016550 | Inner Diameter – 3.0″ | Length – 16″ | Spring Rate – 550lb/in
  
  C92-3016600 | Inner Diameter – 3.0″ | Length – 16″ | Spring Rate – 600lb/in
  
  C92-3016650 | Inner Diameter – 3.0″ | Length – 16″ | Spring Rate – 650lb/in
Rated 5.00 out of 5
(9 reviews)
Original price was: $1,790.00.Current price is: $1,521.50. Add to cart
New Item
Dirt King Fabrication
FREE SHIPPING
within 48 US States
Dirt King Tacoma Shock Relocation Kit | 2005-2023 Tacoma
- Suits 2WD and 4WD 6-Lug 2005-2023 Toyota Tacoma models
- Shocks mounted in the factory location typically measure 2.5″ x 8″, the Dirt King relocation kit is designed to accommodate for 2.5″ x 12″ shocks – like These
- Includes left and right hand sides and all hardware (welding required)
- All metal is shipped raw, as it requires welding – you paint when it’s all done
- Rear shock mounts
- Shock tabs
- Shock tab gussets
- Low profile wrench
- Reservoir mounts
- Grade 8 mounting hardware
- Dirt King sticker pack
- Installation Instructions
- Suitable with Dobinsons 12″ Travel Smoothie MRA Shocks
Rated 4.50 out of 5
(4 reviews)
$734.02 Add to cart
Sale!
RCI Off Road
RCI Rear Tacoma Diff Skid Plate | Non-Hybrid | 2024+ Tacoma
- Suits Toyota Tacoma 2024+ Non-Hybrid
- Protects the low hanging rear differential
- Clamps directly to axle housing for an easy no drill install
- Hugs differential tightly, within 1/4″ for minimal loss in ground clearance.
- Black powder coated for rust resistant, durable and high quality finish
- Design incorporates drain holes for water and dirt to escape, as well as allow full access to the differential drain plug
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- MADE IN THE USA
(0 reviews)
Original price was: $324.00.Current price is: $275.00. Add to cart
Sale!
Skid Plates
Rear Shock Mount Skids | 2005-2023 Tacoma
- Includes one pair of shock mount skid plates (Driver/Passenger)
- Protects low hanging shock mounts on 2005-2023 Toyota Tacoma models
- Includes all hardware for installation
- Product includes a heavy duty black powder coat finish
- Made of 3/16″ Steel
- Fits OEM, Icon, Fox, King, Eibach, Bilstein and many others
- DOES NOT FIT ICON RXT REAR SHOCKS WITH SIDE-MOUNTED EYELET
- Made in Colorado, USA
Rated 5.00 out of 5
(6 reviews)
Original price was: $113.99.Current price is: $108.00. Add to cart