1st gen

Showing all 9 resultsSorted by popularity

Dobinsons
2-2.5″ Lift Kit Builder for Toyota Tundra 2000-2006
- Now you can build your own suspension kit with everything from Exit Offroad
- This page is for the 2000 to 2006 Toyota Tundra 4×4 with V8 Engine
- Use adjustable height IMS struts to go from 2″ to 2.5″ of front lift
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Choose what you’d like to add and build the price auto-adjusts
- You can add or remove whichever items you would like
- It’s recommended that the IMS and MRA coilovers to be run with a diff drop kit and aftermarket UCA’s for coilover clearance and correct travel
Rated 5.00 out of 5
(7 reviews)
From $1,095.00 Select options
Full Suspension Kits - Tundra 1st Gen
FREE SHIPPING
within 48 US States
Dobinsons 2-2.5″ IMS Lift Kit Toyota Tundra 2000-2006
- For 2000-2006 Toyota Tundra 4×4 with V8 Engine
- Adjustable height front struts, lift from 2″ to 2.5″
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Includes 2 Front Struts, 2 Rear Shocks, 2 Front Coil Springs (a pair), and Multiple Rear Lift Options
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- It’s recommended that these coilovers to be run with a diff drop kit and aftermarket UCA’s for coilover clearance and correct travel
- See photo of the droop spacer, which should be used at 2″ or more of lift for adequate down travel
Rated 5.00 out of 5
(13 reviews)
From $1,665.00 Select options
Tacoma 1st Gen (1996-2004)
FREE SHIPPING
within 48 US States
Dobinsons 1.5-2.0″ IMS Lift Kit Toyota Tacoma 1998 to 2004 with Blocks or AAL
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Fully re-buildable and re-valvable shocks
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston 50mm bore – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Includes 2 Front IMS Struts, 2 Rear IMS Shocks, 2 Front Coil Springs (a pair), Rear Spacer Blocks and U-Bolts
- It’s recommended that these coilovers to be run with aftermarket UCA’s for coilover clearance and correct travel
Rated 5.00 out of 5
(9 reviews)
From $1,500.00 Select options
Full Suspension Kits - Tundra 1st Gen
FREE SHIPPING
within 48 US States
Dobinsons 2-2.5″ 3-Way Adjustable MRA Lift Kit | Tundra 2000-2006
- Suits 2000-2006 Toyota Tundra 4×4 with V8 Engine
- Adjustable height front struts, lift from 2″ to 2.5″
- Choose from no added rear lift, a Quick Ride block kit or Add-A-Leaf (AAL) Kit
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Universal Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Includes 2 Front MRA Struts, 2 Rear MRA Shocks, 2 Front Coil Springs (a pair), and multiple Rear Lift Options
- It’s recommended that these coilovers to be run with a diff drop kit and aftermarket UCA’s for coilover clearance and correct travel and alignment
- The included droop spacer goes on top of the strut, under the first washer, if lifting more than 2.0″ (see attached photo)
Rated 5.00 out of 5
(11 reviews)
From $2,700.00 Select options
Dobinsons
Dobinsons 2-2.5″ Lift Kit Toyota Tundra 2000-2006 with Quick Ride Rear (all options)
- For 2000-2006 Toyota Tundra 4×4 with V8 Engine
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Includes 2 Front Struts, 2 Rear Shocks, 2 Front Coil Springs (a pair), Rear Spacer Blocks and U-Bolts
- Choose from twin tube, IMS or MRA shocks in the drop down menu below
- It’s recommended that the IMS and MRA coilovers to be run with a diff drop kit and aftermarket UCA’s for coilover clearance and correct travel
Rated 5.00 out of 5
(13 reviews)
From $1,095.00 Select options
Tacoma 1st Gen (1996-2004)
Dobinsons 1.5″ to 2.0″ Front Coils for Toyota Tacoma 1998 to 2004
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Coil springs are sold as a pair, powder coated teal
- C59-276 – 1.5″ with stock weight
- C59-134 – 1.5″ with bumper and winch
- C59-134 – 2.0″ with stock weight
Rated 5.00 out of 5
(10 reviews)
From $270.00 Select options
Tacoma 1st Gen (1996-2004)
Dobinsons 1.5-2.0″ Lift Kit Toyota Tacoma 1998-2004 with Blocks or AAL
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Includes 2 Front Struts, 2 Rear Shocks, 2 Front Coil Springs (a pair), Rear Spacer Blocks and U-Bolts
- Option now to use Wheeler’s add-a-leaf kit instead of blocks if you’d prefer
- It’s recommended that these coilovers to be run with aftermarket UCA’s for coilover clearance and correct travel
Rated 5.00 out of 5
(9 reviews)
From $930.00 Select options
Tacoma 1st Gen (1996-2004)
FREE SHIPPING
within 48 US States
Dobinsons 1.5-2.0″ 3-Way Adjustable MRA Lift Kit | Tacoma 1998-2004
- Suits 1998 to 2004 Toyota Tacoma 4×4 Extra/Double Cab and 4×2 Prerunner Models (4×2 lift more due to less weight up front)
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Choose from no added rear lift, a Quick Ride block kit or Add-A-Leaf (AAL) Kit
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Universal Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Includes 2 Front IMS Struts, 2 Rear IMS Shocks, 2 Front Coil Springs (a pair), and multiple Rear Lift Options
- It’s recommended that these coilovers to be run with aftermarket UCA’s for coilover clearance and correct travel and alignment
- The included droop spacer goes on top of the strut, under the first washer, if lifting more than 2.0″ (see attached photo)
Rated 5.00 out of 5
(8 reviews)
From $2,700.00 Select options
Tacoma 1st Gen (1996-2004)
Dobinsons Rear Shocks for Toyota Tacoma 1998 to 2004
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals
- Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings
- Double Chrome hardened rods
- Metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Sold in Pairs
Rated 5.00 out of 5
(9 reviews)
From $310.00 Select options