Your cart is currently empty!
Shop
Showing 271–300 of 1944 resultsSorted by popularity
-
DobinsonsDobinsons Tundra 2.25-3.0″ Suspension Kit for 2007-2021 Double Cab 4×4 V8
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to provide comfort and lift
- Multiple coil colors available
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Choose your desired suspension parts to build the kit best suited to your weight
- Multiple lift height and load ratings available
- NEW IMS struts and shocks now available – Adjustable height front struts, massive 2.6″ size body front and rear with 60mm pisons, IFP (Internal Floating Piston) technology
- Front IMS assembly instructions
(10 reviews) -
Tundra 3rd Gen (2022-2024)FREE SHIPPING
within 48 US StatesDobinsons IMS59-60887 2.6″ IFP Rear Shocks Pair
- Suits 2022+ Toyota Tundra Rear with 1.0-3.0″ of Lift – Stock/Light Load Valving
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
- 670mm extended, 410mm compressed
(13 reviews) -
Coil Springs - Lexus GX460
Dobinsons Rear Coil Spring Options for Lexus GX460 2010-2023 – Pair
- Choose what coil suits your vehicle and needs the best
- Sold as a Pair
- Discard passenger weight. Weight listed refers to additional product weight such as roof rack, drawers, rear bumper, swing out spare, etc. For most coils, 100lbs of added weight drops the rear by about 1/4″
- Vehicles with KDSS lifting 1.5″ or more should add a PS59-4025 trim spacer for the passenger side
- C59-323 – Stock height up to 1/2″ lift
- C59-599 – 3/4-1″ with stock weight
- C59-505 – 1.25-1.5″ with stock weight
- C59-325 – 1.75-2″ with stock weight
- C59-327 – 1.75″ with 200-400lbs weight, 2.25″ stock weight
- C59-329 – 1.75″ with 400-800lbs weight
- C59-331 – 1.75″ with 800-1200lbs weight (teal only)
- C59-675V – 2.25″ with stock weight – variable rate coil
- C59-677V – 3″ with stock weight, 2.5″ with 200-300LBS – variable rate coil
- C59-701V – 3″ with 300-600LBS of constant weight – variable rate coil
- C59-749V – 3″ with 600-800LBS or more of constant weight – variable rate coil
- C59-849V – 3″ long travel, requires 1000LBS minimum rear constant added weight – variable rate coil (TEAL ONLY)
(6 reviews) -
Skid Plates
Rear Shock Mount Skids | 2010-2024 4Runner FJ Cruiser GX460
- Includes one pair of rear shock mount skid plates (Driver/Passenger)
- Protects low hanging shock mounts on all 2010-2024 4Runner, FJ Cruiser and Lexus GX460 models
- Includes all hardware for installation
- Product includes a heavy duty black powder coat finish
- Made in USA
(4 reviews) -
Tundra 3rd Gen (2022-2024)
Dobinsons Rear Adjustable Panhard Rod for 22+ Tundra, 23+ Sequoia
- Suits Toyota Land Cruiser 200 Series 2008-2021, Toyota Tundra 2022+ and Toyota Sequoia 2023+
- Replaces OE Rear Panhard Rod, adjustable to suit lift height
- Zinc plated steel and E-coated with high quality rubber bushes supplied
- Off-car adjustable, cannot be set while fully installed
- For 35mm (1.25″) of lift or more
- Rubber Bushes installed and offer greater flexibility than polyurethane, providing maximum articulation
- Panhard rod measures 41″ compressed and can be extended up to 44″ eye to eye
(11 reviews) -
Tundra 3rd Gen (2022-2024)FREE SHIPPING
within 48 US StatesDobinsons IMS59-60687 2.6″ Rear Shocks Pair | 2022+ Tundra – Med/Heavy Valving
- Suits 2022+ Toyota Tundra Rear with 1.0-3.0″ of Lift – Medium/Heavy Load Valving
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
- 670mm extended, 410mm compressed
(17 reviews) -
40 Series Land Cruiser Early (1960-1979)
Dobinsons SK59-002 Greasable Shackle Kit Pair for Toyota 40/45 Series
- Suits Front or Rear FJ40/BJ40 up to 1979 with 25mm spring eyes, and Front FJ45/BJ45 with 25mm spring eyes up to 1979
- Recessed twin hole greasable design
- Reduces friction in bushes, creating a more comfortable ride
- Heavy duty design and provide simple service through external grease nipples
- Sold as a pair to replace the original shackles
- Incredibly tough and durable gold zinc plating
- Photo for illustration purposes only
(8 reviews) -
Sale!15% off Year End SaleTrail-Gear
TG Diff Drop Kit – 95-04 Tacoma 96-02 4Runner 00-06 Tundra
- Solid aircraft-grade 6061-T6 aluminum spacers
- Zinc-plated Grade 8 hardware
- Aluminum spacers and longer zinc-plated Class 8.8 bolts to move the stock skid plate down
- Fits the following applications:
- Toyota Tacoma 1995-2004 (4×4)
- Toyota Tundra 2000-2006 (4×4)
- Toyota 4Runner 1996-2002 (4×4)
- Toyota Sequoia 2000-2006 (4×4)
- Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- Made in USA
(9 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons 10mm Coil Spacer (Single) for Front of Toyota Land Cruiser 80 105
- Suits Land Cruiser 80 Series and Lexus LX450
- High Quality Polyurethane, maintains height over time
- Perfect fit between OE isolator and coil seat
- Sold individually, available front and rear for several vehicles
- Lasts longer than rubber
- Easy to add lift height for worn coils
- Lifts 10mm (0.4″)
(8 reviews) -
200 Series Land Cruiser (2008-2021)FREE SHIPPING
within 48 US StatesDobinsons 200 Series Land Cruiser 1.0-2.5″ IMS Lift Kit
- Suits Toyota Land Cruiser 200 Series from 2008 to 2021 Models
- Complete IMS suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
- Coils springs are marked with white labels – DO NOT REMOVE – and they are also side specific!!
- Base kit Includes 2 Front IMS Struts, 2 Rear IMS Shocks, and 4 Coil Springs
(12 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons C59-269V Rear Coil Springs | Land Cruiser 80 Series – Pair
- Suits Land Cruiser 80 Series and Lexus LX450
- C59-269v 1.75″ Comfort ride spring with only stock weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 480/490mm free height, 17mm wire, variable rate
- Sold in Pairs
(18 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons C59-171 Rear Coil Springs | Land Cruiser – Pair
- 80 Series and Lexus LX450 (1990-1997) – Dobinsons c59-171 – 2″ lift with 750lbs weight, OR 3″ lift with 440lbs weight
- 100 Series (1998-2007) – Dobinsons C59-171 – 1.5″ lift, linear rate, with 880LBS constant rear weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 485/495mm free height, 328LBF/in rate
- Sold in Pairs
(16 reviews) -
FirestoneFREE SHIPPING
within 48 US StatesFirestone 4164 Coil-Rite Rear Helper Air Springs (Airbags) | 200 Series and Sequoia
- Firestone 4164 Suits Toyota Landcruiser 200 Series and Lexus LX570 2008-2020, Toyota Sequoia 2008-2022 with coil springs in the rear
- Complete kit – 1 per vehicle
- Inserts inside your rear coil springs to add additional load support
- Manually inflate or deflate the air bags to add or remove support or height
- Perfect for people who tow, or regularly load up fully and need additional height or support
- Works with all Dobinsons rear coils for these vehicles
- Works with 0-1.5″ of lift
- Route the airlines to your rear bumper or a suitable place to easily add or remove air to the bags
- Installation Manual, Click Here
- We also sell a Firestone air compressor and gauge kit to fill this up from inside the vehicle
(5 reviews) -
Suspension
Dobinsons C45-254 Front Lifted Coil Springs for Nissan Trucks and SUV’s – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 385mm free height, 541LBF/in spring rate
- C45-254 – 1.6″ – Nissan Pathfinder R51 with up to 110LBS constant weight
- C45-254 – 1.6″ – Nissan Xterra (2005-2015) with 110-220LBS constant weight
- C45-254 – 2.5″ with stock weight, 2.0″ with 110-220 constant weight (bumper/winch)
- C45-254 – Nissan D41 Frontier 2022+ models, 3.0″ with stock weight, 2.5″ with 110lbs constant weight
(15 reviews)$270.00 Select options This product has multiple variants. The options may be chosen on the product page -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons 3-Way Adjustable MRA Front Struts Pair | Land Cruiser 200 Series
- Suits 2008-2021 Toyota Land Cruiser 200 Series
- Adjuster rings on strut body are black, not purple
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 22mm / 7/8″ shaft diameter
- Height adjustable with a fully threaded body
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- SOLD IN PAIRS
- Full 2 year limited warranty, no set rebuild time period
- Does not include coil springs or top mounts – sold separately
- Reservoir mounting installation
- Must mount the banjo fitting and hose inwards to engine on MRA struts
(18 reviews) -
4Runner 5th Gen (2010-2024)
Dobinsons Front 1.0″ Lift Coils for Toyota 4Runner TRD PRO – Pair
- Provides 1.0″ lift over stock height by changing only the coils. No other mods required, except an alignment afterwards
- Suits Bilstein and Fox TRD Pro Struts ONLY with flat-ground coils top and bottom
- Will NOT work on 2021 models with a step in the lower coil seat
- Same spring rate as stock, just taller to give the lift
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – RED
- Sold in Pairs
(12 reviews) -
Suspension
Dobinsons 2″ Rear Lift Blocks – Quick Ride Kit – Tacoma Tundra Hilux Frontier
- High Quality cast steel lift blocks/spacers, painted black
- Extended length u-bolts, zinc coated
- Fast and simple to install
- New extended length rear shocks are recommended
- Only to be used with OE height leaf springs
- Suits all Toyota Tacoma’s from 1998 to 2023 and Tundra’s from 2000 to 2021
- Suits all Toyota Hilux from 2005 to 2023
- Suits all Nissan Frontier D21, D22, D40, D41 from 1985 to 2022+
- Installation Instructions
(7 reviews) -
Dobinsons
Dobinsons Tacoma Add-A-Leaf to L59-110-R leaf pack Kit (2 leafs + 2 pins)
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Converts L59-110-R to L59-111-R
- Adds 100KG (220LB) constant load rating to existing springs
- Includes 2 x add-a-leafs and 2 x longer center pins
- Batch code must be 15134 and above
- See attached photo that shows how the clamps on your springs must look in order to fit this add-a-leaf to the pack
(6 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons 3-Way Adjustable MRA 4Runner Lift Kit | 2003-2009 (0-3.5″)
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the 4th Gen 4Runner 2003-2009
- If you have a 2WD model, add 1″ to the listed lift heights of the front coils due to the lighter front weight of the vehicle
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base Kit Price Includes 2 Front MRA Struts, 2 Rear MRA Shocks, and 4 Standard Coil Springs
- For information and specs on the products in the drop down lists below, select an item, then click the small square box that will appear to the right to be taken to that product page
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Full 2 year limited warranty, no set rebuild time period
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base Kit Includes 2 Front MRA Struts, 2 Rear MRA Shocks, and 4 Coil Springs – Select your preferences
- You can go from a standard suspension to full long travel with all the options listed here
- Common installation instructions
(10 reviews) -
Tundra 2nd Gen (2007-2021)
Dobinsons L59-121-R Rear Leaf Springs Pair Tundra 2007-2021
- Suits Toyota Tundra 2WD and 4WD Rear ends from 2007 to 2021 – lifts 2.25″ with 400LBS constant rear end load (For campers, and heavy constant load rear ends)
- There are 7 leaves in this pack
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Enough for 1 Vehicle
- Photo for illustration purposes only
- Scroll down to add bushings and related parts (they don’t come with anything automatically)
(8 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons C59-615V 4″ Flexi Rear Coil Springs | Land Cruiser 80 series – Pair
- Suits Land Cruiser 80 Series and Lexus LX450
- 4″ lift with up to 200 LBS of additional accessory weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 570/580mm free height, 18mm wire, 175-275LBF/in variable rate
- Sold in Pairs
(18 reviews) -
70 Series Prado I, Land Cruiser II, LJ78/79, RJ77, KZJ78 - 87-96
Dobinsons 1.75″-2.5″ Lift Kit for Toyota Land Cruiser LJ78 LJ79 RJ77 KZJ78 1987-96 Square Headlights
- For 1987-1996 Toyota 70 Series 5-door models, LJ78, LJ79, RJ77, KZJ78 with Square Headlights and 2.4L petrol or 2.4L or 3.0L diesel engines
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to match OE fitment specs
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base kit includes front and rear coils and shocks, choose optional parts below
- Choose your coils and load carrying ability, anywhere from 1.75″ up to 2.5″ of Lift
(12 reviews) -
4Runner 3rd Gen (1996-2002)
Dobinsons Rear Lifted Coil Options for Toyota 4Runner 3rd Gen 1996-2002 – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(19 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons 80 Series Rear Bumper with Tire and Jerry Can Carrier
- Suits all Toyota Land Cruiser 80 Series and Lexus LX450 from 1990-1997
- See product walk-around video down below
- Comes with Black Powder Coat
- Stainless Steel Latch and Hardware
- Complete Kit with Everything Included
- All Lighting is 12V LED, requires splicing into original wiring harness (not plug and play)
- Works with Factory Tow Hitch in OE position
- Adjustable offset tire carrier head, suitable up to a 35″ tire, on right side (US Passenger side)
- Includes single or dual Jerry Can Carrier on the left side (US Driver’s side)
- Instructions Page
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address
(5 reviews) -
Dobinsons
Dobinsons UCA Ball Joint for 4Runner FJ Cruiser GX470 GX460 LC200
- Suits Dobinsons UCA’s that fit Toyota 4Runner 4th and 5th Gen 2003-2024, FJ Cruiser all years, Lexus GX470 and GX460, Land Cruiser 100 and 200 Series
- This ball joint will fit UCA part numbers UCA59-001K, UCA59-002K, UCA59-006K, UCA59-201K, UCA59-202K, UCA59-206K
- Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
- Sold individually
- Includes new ball joint, boot, split pin and nut (subject to design changes)
(6 reviews) -
Bronco (2021-2024+)
Dobinsons Ford Bronco Diff Drop Kit
- Suits 2021+ Ford Bronco 2-door and 4-door models (not Bronco Sport)
- Reduces the CV angle on lifted Bronco’s
- Includes machined aluminum spacers
- Easy bolt-on installation
- Includes new correct grade longer hardware
- Recommended for lift heights of 2″ or more to reduce the CV angle at the new ride height
- Some early batches of this kit included extra unnecessary hardware
- Installation Instructions
(2 reviews) -
Sale!15% off Year End SaleAll Pro OffroadFREE SHIPPING
within 48 US StatesAll Pro Complete CV Boot Kit | Tundra 07-21 + Sequoia 08-22 + 200 Series 08-21
- Complete CV boot replacement kit – Suits Toyota Tundra 2007-2021, Toyota Sequoia 2008-2022, and Toyota Land Cruiser 200 Series 2008-2021
- Includes inner and outer OEM-Style CV boots and all related clamps.
- Qty 2 – OEM-Style Neoprene Outer CV Boots
- Qty 2 – OEM-Style Neoprene Inner CV Boots
- Qty 4 – CV Grease Packets
- Qty 8 – Ear-Type CV-Joint Clamps
- Qty 2 – Axle C-Clips and Snap Rings
- Qty 1 – CV Clamp Crimp Pliers
(15 reviews) -
Dobinsons
Dobinsons PB45-1095K Rear Polyurethane Leaf Spring Bush Kit
- Suits Nissan Frontier D40 All Years, Nissan Frontier D41 2022+, Nissan Xterra (2005-2015), Nissan Navara D40 All Years
- For any lift height, or no lift. These are OE replacement bushings.
- Use with Dobinsons Leaf Springs or any other brand that can accept OE-size bushings
- Pressing of OE bushings may be necessary during removal and installation
- Replaces OE bushings in all 6 positions of rear leaf springs
- Greasable bolts are sold in pairs, sold separately
(6 reviews) -
Dobinsons
Dobinsons SP59-006 Greasable Pin Kit (Pair) Land Cruiser 40/45 Series to 1979
- Suits 25mm leaf springs in front and rear of FJ40, BJ40 and the front of FJ45, BJ45 with 25mm spring eyes and 15mm bolts
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Purchase includes 1 pair (2 pieces) of greasable pins for the fixed end of a leaf spring
- Photo for reference only, actual product may appear different
(3 reviews)
