Your cart is currently empty!
Shop
Showing 451–480 of 2174 resultsSorted by popularity
-
LJ70, LJ72, LJ73, LJ77 - 90-93 - Square Headlights
Dobinsons C59-244 2.5″ Front Coil Springs | LAND CRUISER 70 Series Multiple Models – Pair
- Dobinsons C59-244 Front Coil Springs for TOYOTA LAND CRUISER LJ70, LJ72, LJ73, LJ77 1/90-5/93 W/SQUARE HEADLIGHTS and 70 Series Prado I, Land Cruiser II, LJ78/79, RJ77, KZJ78 – 87-96
- Lifts 2.5″ with bumper AND winch weight of 110-150lbs.
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold as a Pair
(7 reviews) -
Gladiator JT (2020-2025+)Jeep Gladiator Long Range Auxiliary Fuel Tank (17gal) 2020+ 3.6L V6
- Suits Jeep Gladiator JT Trucks from 2020-2024 onwards with the 3.6L V6 Gas engine
- Not suitable for Diesel versions
- This is an additional tank that fits on the left side of the driveshaft, it holds 17 gallons, and uses a transfer pump to fill your main tank when you hit a switch
- 17 gallon capacity, fits on opposite side of OE gas tank for maximum clearance!!
- 17 gallons plus your original 22 gallon tank gives you a capacity of 39 gallons in total!!
- Tank fills using the OEM gas door and supplied parts
- Tank uses a transfer pump to fill the main tank, 2L per minute pump rate
- Exhaust modification required – exhaust needs to be replaced with aftermarket/custom or available LRA replacement exhaust kit listed below (tank goes where OE exhaust was routed). Exhaust kit components
- Fitting time – approximately 5.5 hours
- Part Number JGJTPA
- Fitting Instructions – Intended to be installed by a certified mechanic
- This item ships on a pallet to the nearest Truck Freight terminal for you to pickup. We will be in touch with you regarding the nearest freight terminal, unless you add home delivery fee below.
- This product can not be sold or shipped to residents in California, as it will not pass SMOG. Do not order this product if you live in California!!
- MADE IN AUSTRALIA
- Nearest Freight Terminal Finder – Use this to decide if you want home delivery or pickup at the nearest terminal
(5 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons IMS59-60685 Rear 2.6″ IFP Shocks Pair | 80 Series (6″ lift) + Tundra
- Suits Toyota Land Cruiser 80 Series and Lexus LX450 1990-97 with 6″ of Lift or for Long Travel use and 2022-2025+ Toyota Tundra for Long Travel
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
- 730mm extended, 446mm compressed
- Bump stop extensions and longer brake lines must be run with these longer shocks
- Sold in Pairs
(12 reviews) -
DobinsonsFREE SHIPPING
within 48 US StatesDobinsons Tundra 2.25-3.0″ IMS Suspension Kit for 2007-2021 Double Cab 4×4 V8
- Complete IMS suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Photos show full kit with most options purchased – choose what you’d like
- Coils are specifically suited to provide comfort and lift
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Choose your desired suspension parts to build the kit best suited to your weight
- IMS struts – Clip height adjustable front struts, massive 2.6″ size body front and rear with 60mm pisons, IFP (Internal Floating Piston) technology
- 4 Clip height settings. Lowest height is stock/OE height. Each clip height adds approximately 1/2″ of lift. Use clip heights to fine tune lift height or offset for vehicle lean
- FRONT ASSEMBLY INSTRUCTIONS
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
(7 reviews) -
KL Cherokee (2014-2022) (Trailhawk)
Dobinsons C29-151 Rear Lifted Coils for 4X4 Jeep Cherokee KL 2014 to 2022 – Pair
- Trailhawk (AD2) lifts 1.0″ rear. Sport (AD1) models lift 2″ rear
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Can be used with Dobinsons heavy duty Twin-tube Nitrogas Struts
- Sold as a pair
- Powder coated in a long lasting black color
(5 reviews) -
Air CompressorsFREE SHIPPING
within 48 US StatesARB CKMTA12 12V High Performance Twin Air Compressor
- Motors are water sealed, 100% ball bearing equipped (i.e. no bushings), and feature a unique linear brush pre-load system for extra long life, low heat and quiet operation throughout the life of the unit.
- Compact twin motor, dual cylinder design makes it the highest flowing compressor in its class (voltage vs. size). Highest air flow rate of any 12V compressor of its size on the market at 174LPM [6.16CFM].
- Full wiring loom included for simplified installation and easy plug-in connectivity to Air Locker control solenoids. (Note: Air Locker Manifold Kit #171503 required to mount solenoids).
- Motors are internally thermal protected against extreme temperature damage. Over-pressure safety valve equipped. Equipped with dual heavy duty Maxi-Fuses for professional in-line circuit protection and true circuit redundancy in case of a fault.
- Compressor pistons are equipped with a heavy duty European made cylindrical roller bearing. Hard-anodized cylinder bores and PTFE (Teflon) impregnated carbon fibre piston seals for reduced friction and maximum trouble free life.
- 12V, Draws 50 Amps max, 6.16 CFM, 150 PSI max, 100% Duty Cycle
- 10.9 x 7.5 x 4.1 inches actual dimensions, 19.4 LBS with all items included
(4 reviews) -
SnorkelFREE SHIPPING
within 48 US StatesSafari Snorkel SS450HP – Toyota 4Runner 5th Gen 2010-2024
- Suits Toyota 4Runner 5th Gen models from 2010 to 2024
- Raises air intake to prevent water ingestion, while also allowing vehicles to utilize clean air when driving in dusty conditions.
- Vehicle specific design and factory airbox adaption fitment.
- Manufactured using durable, UV stable cross linked polyethylene material.
- Supplied as a comprehensive kit, including the necessary fasteners and mounting brackets.
- Unique air ram design acts as a highly efficient water separator to remove rain water form incoming air stream.
- Designed and manufactured in Australia
- 10% higher CFM for this application over other brand snorkels, due to large body design
- Requires cutting and drilling of the fender and A-pillar. Full instructions and template provided.
(20 reviews) -
Firestone
Daystar Universal Airbag Cradle Kit Tacoma and Tundra
- Enjoy full suspension travel and the benefits of air bags with the Daystar Air Bag Cradle Kit
- Fits most full-size trucks and SUVs running 6” diameter bellow-type rear air bags
- Mounts to your truck’s lower air bag suspension mounting bracket—Installation Instructions (PDF)
- Allows full factory differential drop without fear of bag damage
- Provides room for air bags to safely cycle with no loss of wheel travel
- Crafted from super-tough Daystar polyurethane
- Kit includes two cradles and mounting hardware
- Proudly built in the USA
- Your Daystar Air Bag Cradle Kit is backed by a Lifetime Warranty
- Daystar cradle mounts to top of leaf spring, airbag mounts to frame above only
(5 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons C59-313 Rear Coil Springs | Land Cruiser 80 Series – Pair
- Suits Land Cruiser 80 Series and Lexus LX450
- C59-313 4″ lift with 400-750lbs of constant weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 545/555mm free height, 21mm wire, 318LBF/in rate
- Sold in Pairs
(18 reviews) -
SPCFREE SHIPPING
within 48 US StatesTax Return Sale, 5% off
Use Coupon TAXTIMESPC 25465 | UCA’s for Land Cruiser 200 Series & LX570 2008-2021 Pair
- Suits all Toyota Land Cruiser 200 Series and Lexus LX570 models – 2008-2021
- Improved clearance to get around the spring bucket
- 80° of articulation in its ball joint
- SPC’s arm gives you maximum droop travel.
- SPC’s arms have +1° of caster built into them
- Arm will get you 0° to +4° of caster and ±2° of camber
- Maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming
- Installation Instructions
- We offer replacement ball joints as well
(10 reviews) -
Dirt King FabricationFREE SHIPPING
within 48 US StatesDirt King Toyota Tacoma Tubular Ball Joint UCA’s Pair for 2005-2023
- Suits 2005-2023 model Toyota Tacoma 2nd and 3rd Gens – 6 Lug models only
- CAD designed
- Formed steel bushing gussets
- Constructed with 4130 chromoly tubing
- Preassembled with heavy duty Moog ball joints for fast installation
- Probearing Pro 2 Series bushings (new for 2024)
- Maintenance Free Bushings
- Zinc plated components for corrosion resistance
- Professionally MIG welded
- Powder coated black
- Includes Ball Joint Caps
- Installation Instructions
- Proudly made in the USA
(4 reviews) -
DobinsonsFREE SHIPPING
within 48 US StatesDobinsons 12V Zenith 6.0 CFM Air Compressor Kit High Output
- 170L/ minute Air Flow
- Integrated Air Tank
- 2 x 1/8” NPT Auxiliary fittings
- Carry Bag
- 6.5 m Rubber Hose
- Pressure Cut Off Switch
- Safety Release Valve
- Removable Base for Permanent Mounting
- Quick Release Tyre Chuck
(17 reviews) -
GX470 (2002-2009)FREE SHIPPING
within 48 US StatesDobinsons GX470 Snorkel Kit for Lexus 2003-2009
- Lexus GX470 Snorkel Kit – Suits 2003-2009 Models
- Rotationally molded using precision CNC shaped aluminum dies
- Increases air intake height to allow safer water crossings and reduce dust intake
- Increased air intake height rams cooler, cleaner air into the engine increasing engine performance
- Increased air intake height rams cooler, cleaner air into the engine increasing engine performance
- Manufactured from high quality UV resistant LLDPE
- Snorkel Kits include template and all mounting hardware
(8 reviews) -
Brake LinesFREE SHIPPING
within 48 US StatesExtended Rear Brake Lines +2″ for Toyota Tacoma 2005-2023 (Black)
- American made D.O.T. Certified extruded teflon core, stainless steel braided and coated with a PVC cover
- 2″ longer than stock for most suspension lifts (not long travel)
- Suits the following vehicles: Toyota Tacoma 2005-2015, Toyota Tacoma 2016+
- Can be used with a non-lifted truck, or with any lifted truck where the shocks aren’t long travel
- Sold as a pair with new retaining clips
- This set is BLACK in color
(6 reviews) -
BrakesFREE SHIPPING
within 48 US StatesPowerbrake X-Line 4×4 Front Toyota Tacoma Big Brake Kit for 2005-2023
2005-2023 Toyota Tacoma Big Brake Kit Includes:
- X-Line billet 6-piston off-road calipers (pair)
- High-performance brake pads, pre-loaded into the calipers
- 1-Piece 350mm x 34mm (13.77″ x 1.33″) 48-vane discs
- Curved, directional cooling vanes
- Billet caliper mounting brackets
- Stainless steel braided brake lines
- All necessary mounting hardware for quick, easy bolt-on installation
- Comprehensive fitment and bed-in instructions
- For 6-Lug models only (Pre-Runner and 4×4 models)
- Now Includes Upgraded Powerbrake Pads, PB05 Compound – highest level 4×4 brake pads available – made in Japan
- Manufactured, finished and packaged 100% in South Africa
- REQUIRES 17″ WHEELS FOR ADEQUATE CALIPER CLEARANCE
(9 reviews)$2,675.00 Select options This product has multiple variants. The options may be chosen on the product page -
Dobinsons
Dobinsons Fog Light Kit for Dobinsons Bumpers
- Suits:
- BU59-5559 Toyota Tacoma Bull Bar
- BU59-5557 Toyota 4Runner Bull Bar
- BU59-5558 Toyota Tundra Bull Bar
- Includes Fog Light Bulbs and Wiring Harness
- Rating IP68
- 12V Halogen Bulbs
- 1 Kit needed per vehicle
(3 reviews) - Suits:
-
100 Series Land Cruiser IFS (1998-2007)FREE SHIPPING
within 48 US StatesDobinsons 3-Way Adjustable 100 Series MRA Kit | Land Cruiser IFS V8 Gas 1998-2007
- For 1998-2007 Land Cruiser 100 Series and Lexus LX470
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- By default, no rear coils are included, but you can easily select and add them
- You can also remove the torsion bars if you don’t want those
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- 3-way adjustable valving shocks – Adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Universal Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Installation Instructions of the MRA Shocks
- Full 2 year limited warranty, no set rebuild time period
- Standard Kit Includes 2 Front MRA Shocks, 2 Front Torsion Bars, 2 Rear MRA Shocks, and 2 Rear Coil Springs – select your preferences
(8 reviews) -
Dobinsons
Dobinsons HJ60-7L-R Rear Medium Load Leaf Springs Pair
- Rear Leaf Springs for the Toyota FJ/BJ70, BJ71, FJ/BJ73, FJ/BJ74 4×4 from 1985 to 1989 and 70 Series – HZJ70, HZJ73, PZJ70, PZJ73 1990-1999
- 50mm rear lift with stock rear end weight
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Sold as a pair, includes 1 left and 1 right spring (different heights to correct lean)
(2 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons GS59-634 Front Twin Tube Long Travel Shocks Pair | 70 Series
- For 1/90 to 5/93 Toyota 70 Series models, LJ70 LJ72 LJ73 LJ77 with Square Headlights, and 1994+ RJ70, RJ73, KZJ70, KZJ71, KZJ73 with Square Headlights, and LJ78, LJ79, RJ77, KZJ78
- For 2.5″ of lift only
- Sold as a pair
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
(8 reviews) -
Add-a-LeafFREE SHIPPING
within 48 US StatesWheeler’s 2.0″ Lift Add-A-Leaf Set for 2005-2023 Tacoma
- Suits 2005-2015 and 2016+ Tacoma 4×4 and Pre-Runner
- Includes 2 single add-a-leafs and 2 longer center pins
- Works with factory length u-bolts or aftermarket
- Adds 2.0″ of lift approximately on dual cab short bed models. Long bed models won’t see as much lift
- Added constant load on the rear of the truck may reduce the total added lift height, but this will support additional weight better than the stock leaf pack
- Feature 60mm width, diamond cut ends and anti-friction pads for smooth, squeak free performance
- Instructions
(10 reviews) -
Long Range Tanks
Lexus GX470 & 4th Gen 4Runner Long Range Auxiliary Fuel Tank (24gal) 2003-2009
- Suits Lexus GX470 (all years) and 4th Gen 4Runner (all years 2003-2009), works without KDSS and without air suspension
- This is an additional tank that goes behind the rear axle, it holds 24 gallons, and uses a transfer pump to fill your main tank when you hit a switch
- 24 gallon capacity, fits in the void behind the rear axle and in front of the rear bumper, requires relocation of the stock spare tire
- 24 gallon size is a redesign of the 33 gallon, to maintain better clearance under the tank
- 24 gallons plus your original 23 gallon tank gives you a capacity of 47 gallons in total!!
- SPLIT FILL – Single fill point with no diversion – fuel flows into both tanks until both are full
- Tank uses a transfer pump to fill the main tank, 2L per minute pump rate
- No Exhaust modification required
- Spare tire must be relocated
- Fitting time – approximately 5 hours
- Does not suit KDSS models and does not suit air suspension models
- Part Number TL470GXA24-US
- Intended to be installed by a certified mechanic
- Installation Instructions
- This item ships on a pallet to the nearest Truck Freight terminal for you to pickup. We will be in touch with you regarding the nearest freight terminal, unless you add home delivery.
- This product can not be sold or shipped to residents in California. Do not order this product if you live in California!!
- MADE IN AUSTRALIA
- Nearest Freight Terminal Finder – Use this to decide if you want home delivery or pickup at the nearest terminal
(5 reviews) -
100 Series Land Cruiser IFS (1998-2007)
OME Heavy Duty Torsion Bar Pair for Land Cruiser 100 Series V8 1998-2007
- For V8 Gasoline/Petrol powered Land Cruisers from 1998 to 2007 and Lexus LX470
- Increased spring rate to improve handling and lift front end
- Powder coated black for a long lasting finish
- Replaces OE torsion bars without modification
- Torsion bars must be installed with 2/3 suspension down travel and 1/3 up travel to ensure a good ride
(7 reviews) -
Sequoia 1st Gen (2001-2007)FREE SHIPPING
within 48 US StatesDobinsons 0-2.5″ Sequoia IMS Suspension Kit for 2001 to 2007 4.7L V8
- For Toyota Sequoia 2001 to 2007 models, lift 0-2.5″ depending on options chosen
- Adding preload with the adjustable height IMS struts gives you 2.5″ of lift, or set to the standard coil seat height for 1.75-2″ of lift
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged IMS Shocks, Superior Design, thicker walls, longer travel
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base Kit Includes 2 Front Struts, 2 Rear Shocks, and 4 Coil Springs
- Additional parts can be added from the drop down menus
- It’s recommended that these coilovers to be run with aftermarket UCA’s for coilover clearance and correct travel
(13 reviews) -
ARB
ARB 171302V2 Air Inflation Hose Kit for Air Compressors
- Kit Includes: 1 x High heat pressure hose (18ft long), 1 x ARB air chuck with quick press fitting, 1 x ARB T-fitting for use with the CKMA12 ARB air compressor, an assortment of additional fittings to suit various camping and sporting gear such as air mattresses and basket balls
- For use with Air Compressor to fill up deflated tires after a day on the trail.
- Optional pump up kit allowing you to use your CKMA12 Compressor and the new CKMTA12 and CKMTA24 TWIN compressors to quickly plug in a heavy duty airline and air up tires after a day on the trail or fill up after patching a flat tire.
- Designed by ARB engineers for maximum air flow
- it has line protectors on the end, which helps from kinking, and makes the hose last a long time.
(7 reviews) -
200 Series Land Cruiser (2008-2021)
Dobinsons C59-545 3″ HD Land Cruiser 200 Series Rear Coils – Pair
- C59-545 – 4″ lift with stock weight, 3″ lift with 220 LBS constant rear weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 500/470mm free height, 248LBF/IN Spring Rate
- Sold as a Pair – marked side specific for installation
(7 reviews)$305.00 Select options This product has multiple variants. The options may be chosen on the product page -
80 Series Land Cruiser (1990-1997)
Dobinsons C59-176 Front Coil Springs | Land Cruiser 80 series 3.0″ Lift with 110LBS Load – Pair
- Suits Land Cruiser 80 Series and Lexus LX450
- C59-176 are Front Linear rate coils to give 3.0″ of lift with up to 110LBS of constant accessory weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(17 reviews) -
Tundra 2nd Gen (2007-2021)
Dobinsons C59-578 Front 3″ HD Lift Coil Springs | Toyota Tundra 4×4 2007-2021 – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations. Durable Powder Coat Finish
- Extended length new front struts will be required to use these coils, such as GS59-710 Dobinsons Struts
- Lifts 4″ with stock weight front end, and 3″ with a bumper and winch installed
- Sold in Pairs
- 662LBF/in spring rate, 440mm free height
(18 reviews)$405.00 Select options This product has multiple variants. The options may be chosen on the product page -
Tacoma 2nd Gen (2005-2015)
Dobinsons 2″ to 3″ Lift Kit Toyota Tacoma 2005-2015 with Blocks or AAL
- 4×4 Access Cab models come with 1″ front lift from the factory. Lift heights listed are for Dual cab 4×4 models. Subtract 1″ for access cab models
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Normal kit Includes 2 Front Struts, 2 Rear Shocks, 2 Front Coil Springs (a pair), Rear Spacer Blocks and U-Bolts
- You can now select to use Wheeler’s Add-A-Leaf Kit instead of the Quick Ride Kit if you’d prefer
- For rear lift, choose either the Quick Ride Kit or an Add-A-Leaf kit
- Select front coils based on front end accessory load and lift height
(10 reviews) -
SnorkelFREE SHIPPING
within 48 US StatesDobinsons 80 Series Snorkel Kit for Land Cruiser 1990-97
- 80 Series Snorkel Kit – Suits Toyota Land Cruiser 80 Series and Lexus LX450 1990-1997 models
- Rotationally molded using precision CNC shaped aluminum dies
- Increases air intake height to allow safer water crossings and reduce dust intake
- Increased air intake height rams cooler, cleaner air into the engine increasing engine performance
- The higher the intake, the less dust is in the air
- Manufactured from high quality UV resistant LLDPE
- Snorkel Kits include template and all mounting hardware
(9 reviews) -
4Runner 5th Gen (2010-2024)
1/2″ Rear Coil Spacer Single | 4Runner FJ Cruiser Lexus GX470 GX460
- Suits Toyota 4th Gen 4Runner – 2003 to 2009, Toyota 5th Gen 4Runner – 2010 to 2024, Toyota FJ Cruiser – all years, Lexus GX470 – all years, Lexus GX460 – all years, Toyota Prado 120 – all years, Toyota Prado 150 – all years
- Sold Individually
- Long lasting – hard durometer polyurethane
- Easily add rear lift or fix leaning issues
- Optional- bolt to the coil bucket for easy installation. We have noticed that it can be difficult for customers to install other brands, as they tend to slide around while you are trying to reinstall the spring. Bolting it to the coil bucket eliminates that issue.
- Do not stack
- Fits any OE style spring – Top Cone isolator- Apache, Dobinsons, Ironman, OEM, Old Man Emu, Alldogs Offroad, etc.
- NOT compatible with Eibach rear lift springs used in their air to coil conversions – GX470/460 etc.
- Cone Isolator shown in picture not included
- Airbag Models will need to convert for coil springs for these to work
(10 reviews)
