Shop

Showing 661–690 of 1945 resultsSorted by popularity

Sale!
Upper Control Arms
FREE SHIPPING
within 48 US States
On Sale All November!!
Icon Billet UCA DJ Pro Pair for 22-24 Tundra + 23-24 Sequoia
- Suits 2022-2024+ Tundra and 2023-2024+ Sequoia 4×4 Models with 1.75+ of lift over a base model
- CNC machined 6061 billet aluminum construction with satin anodized finish
- Corrects suspension geometry and allows for proper wheel alignment on Tundras and Sequoias with up to 3.5” of lift
- Quick, precise, on-vehicle adjustment for both caster and camber
- Delta Joint PRO allows maximum articulation without binding
- Delta Joint PRO is 100% serviceable and rebuildable
- FK Rod Ends at chassis pivots for strength and precision driving characteristics
- Built in O-ring sealed dust cover cap
- Installation Guide
- Warranty Info
Rated 5.00 out of 5
(7 reviews)
Original price was: $1,439.95.Current price is: $1,224.00. Add to cart
Sale!
Dobinsons
On Sale All November!!
Dobinsons IMS59-50229 Monotube 2.2″ IFP Rear Shocks Pair
- Suits the rear of Toyota Hilux Revo 2016+ and Toyota Tacoma 1998-2004 (for long travel)
- For the Tacoma, these are considered long travel shocks for maximum droop. Additional parts may be required to get that travel out of the truck, such as bump stop extensions, longer brake lines, etc
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Dobinsons IMS59-50229 Specifications: 650mm extended, 416mm compressed, 56mm body size
Rated 5.00 out of 5
(11 reviews)
Original price was: $580.00.Current price is: $493.00. Add to cart
Sale!
Roof Racks
On Sale All November!!
RCI 12″ HD Low Profile Truck Bed Rack
- For Short Bed Trucks from 46-58″ in Bed Length
- For Trucks Such As: Jeep Gladiator, Toyota Tacoma, Nissan Frontier, Ford Ranger, Chevy Colorado, GMC Canyon, Ford F150, Toyota Tundra, etc
- Rack is 12″ tall from bed rail to top of rack
- Mount anything from lights, Hi-lift, co2, fire extinguisher, quick-fist, roto-pax, spare tire, roof top tent, etc
- This is our HD model, utilizing three cross-members spanning the truck bed, this rack is has the highest weight capacity and provides even weight distribution on the trucks bed side rails
- Built in mounting points allow unlimited options for adding accessories
- Bolts to inside of bed rails or can alternatively be mounted with optional “drill-free” clamps to mount like a truck topper (Not applicable when bolting to accessory rail systems)
- Rack is 12″ tall from bed rail to top of rack
- Adjustable width adapts to any truck bed from 54″ – 64″ width between the bed rails
- Three length options to fit any application from 5′ beds to 6’+
- Maintains very good visibility through the back window despite the low overall rack height
- Using this rack will minimize the aerodynamic drag normally associated with roof top tents by keeping it largely below the roof-line
- Slotted mounting points on top of rack accept nearly any roof top tent making mounting a breeze
- Includes TWO top braces, for unlimited accessory and tent mounting options
- Heavy duty black textured powder coat finish comes standard, plus we take it a step further and coat all racks with an epoxy primer. This extra step is expensive and time consuming but ensures our paint job will outlast anything else in the industry!
- Easy bolt together assembly, takes about 45 minutes to install with only a few basic hand tools
- All hardware for installation is included
- Weights
  
  5ft (46″) 86lbs
  
  5ft6in(52″) 92lbs
  
  6ft(58″) 96lbs
- Adjustable Bedrack Install Guide
- Made in Loveland, Colorado USA
Rated 5.00 out of 5
(2 reviews)
Original price was: $609.99.Current price is: $518.00. Select options
On Backorder
180° Awnings
FREE SHIPPING
within 48 US States
Overland Vehicle Systems Nomadic 180 LTE 180 Degree Awning
- The Overland Vehicle Systems Nomadic 180LTE Awning is the perfect solution for anyone in need of reliable, free-standing shelter.
- Made with quality materials, this awning provides up to 59 square feet of coverage and can be used at a full 180 degrees.
- The Overland Vehicle Systems Nomadic 180LTE Awning is easy to set up
- The Nomadic 180LTE Awning is supported by 4 integrated drop-down legs, 4 integrated 1″1/8″ tubular heavy-duty rafters supported on a Heavy-Duty Aluminum Frame.
- The Nomadic 180LTE Awning is made from 280G poly cotton rip stop material with heat sealed seams, easily folds, and secures in a 1000g PVC cover.
- This Nomadic 180LTE awning features a universal “L” mounting bracket solution that can be mounted onto a variety of roof racks, making it perfect for your off-road rig.
- The awning comes with a 4-year warranty, ensuring your satisfaction.
- Poles expand to 7.5FT tall
- Measurements are listed in the attached photos
- Closed Dimensions: 72″ long x 6″ wide x 7″ high, 33.5 LBS
- Optional wall sold separately
Rated 5.00 out of 5
(8 reviews)
$399.99 Add to cart
Sale!
Suspension
On Sale All November!!
KDSS Spacer Kit – Lexus GX460 5th Gen 4Runner – Rears Only
- Rear spacers only (2 rear spacers included with hardware)
- Suits 5th Gen Toyota 4Runner with KDSS (2010-2024) and Lexus GX460 (2010-2023)
- Made from 6061 aluminum, Type III hard coat anodized in black, and supplied with new hardware
- Helps correct incessant lean of a lifted vehicle with KDSS by adding a spacers to both mounts on the rear
- Bolt on installation
- Mounts between factory points that hold the sway bar in place
- Raised/longer spacers helps correct the lean of a vehicle and also adds additional rear travel in the back to help clear the sway bar link from the panhard rod at full extension
- Includes rear mounts (2 in total)
- See instructional video for how these get installed here
- Installation Instructions
- A full kit including the single front spacer is also offered HERE
Rated 5.00 out of 5
(16 reviews)
Original price was: $150.00.Current price is: $127.50. Add to cart
Sale!
Tundra 3rd Gen (2022-2024)
FREE SHIPPING
within 48 US States
On Sale All November!!
Dobinsons MRA59-A887 2.6″ 3-Way Adjustable Rear Shocks Pair
- Suits 2022+ Toyota Tundra Rear with 1.0-3.0″ of Lift
- These shock run softer internal valving than the MRA59-A687 (which are better suited to heavy loads)
- 3-way adjustable valving – Adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 22mm / 7/8″ shaft diameter
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Piggyback Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- 674mm extended, 420mm compressed
- Installation Instructions of the MRA Shocks
Rated 5.00 out of 5
(15 reviews)
Original price was: $1,350.00.Current price is: $1,147.50. Add to cart
Sale!
Shocks + Struts - 3rd Gen 4Runner
FREE SHIPPING
within 48 US States
On Sale All November!!
Dobinsons MRA59-A225 3-Way Adjustable Rear Shocks Pair | 3rd Gen 4Runner
- Suits 3rd Gen Toyota 4Runner 1996-2002
- Suits Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your springs, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- 530mm extended length, 344 compressed
- SOLD IN PAIRS
- Includes Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Photos for illustration purposes
Rated 5.00 out of 5
(15 reviews)
Original price was: $1,150.00.Current price is: $977.50. Add to cart
Sale!
Performance Upgrades - Tundra 2nd Gen
FREE SHIPPING
within 48 US States
On Sale All November!!
Powerbrake D-Line HP Rotor and Pad Kit | Tundra 07-21 Rear
- Suits Toyota Tundra 2007-2021 Rear
- Also offered for the FRONT
- Powerbrake D-Line Features
  
  Rotors are cast from a proprietary high carbon cast-iron alloy.
  
  Rotors are machined to tolerances up to three times tighter than the industry norm.
  
  All Powerbrake rotors feature our MTR (Max Temperature Recording) system.
  
  Proprietary black disc surface coating ensures quicker bed-in and max brake performance.
  
  Spiral slots on the rotor fiction surface clear friction gasses, debris and water.
  
  Matched high friction PB05 brake pads take the guesswork out of pad selection.
  
  Pad compound PB05 is manufactured in Japan and has been specifically formulated for use on 4×4 vehicles
- Powerbrake D-Line Benefits at a Glance
  
  Reduced stopping distances in both wet and dry conditions.
  
  Reduced brake fade and improved brake consistency.
  
  Improved initial brake response (bite).
  
  Improved brake modulation particularly during emergency stops.
  
  Improved resistance to rotor distortion (warping) and cracking at high temperatures.
- What’s Included in Powerbrake D-Line?
  
  2 x Standard OEM diameter high performance slotted rotors for your 4WD or truck – Made in South Africa.
  
  An axle set of matched PB05 high-performance brake pads – Made in Japan.
  
  Fits as per a standard rotor and pad change, using the vehicle’s original calipers.
Rated 5.00 out of 5
(3 reviews)
Original price was: $899.00.Current price is: $764.00. Add to cart
Sale!
Bronco (2021-2024+)
On Sale All November!!
Dobinsons Ford Bronco Front Coils | C19-566 – Pair
- Dobinsons C19-566 Suits Ford Bronco:
  
  2 Door – BL, Wildtrack, FE 2.7L – 110-200lb Load
  
  4 Door – BS, BL 2.3L – 110-200lb Load
  
  4 Door – First Edition, BL, Black Diamond 2.7L – 0-110Lb Load
- Coil Springs Can Only Be Fitted To Dobinsons IMS19-50098
- Coils Provide Approximately 3″-4″ Lift Above Non Sasquatch Models & 2″-3″ Lift Above Sasquatch Models
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Choose what color you would like
- Made in Australia
- Sold in Pairs
Rated 5.00 out of 5
(13 reviews)
Original price was: $270.00.Current price is: $229.50. Select options
Sale!
Shocks + Struts - 5th Gen 4Runner
On Sale All November!!
Dobinsons GS Shock Kit for 5th Gen Toyota 4Runner
- Dobinsons GS Twin Tube Strut and Shock Absorber Kit – Front and Rear
- Suits 2010-2024 Toyota 4Runner
- Complete kit of 2 Front Struts and 2 Rear Shocks
- Strut and Shock specs are down below
- Reservoir: No
- Finish: Painted
- Body Design: 51mm OD
- Rod: Double Chrome 18mm
- Oil: High Quality Fuch’s Oil from Germany
- Seals: Japanese NOK Multi-Lip
- Rings: Teflon Piston Rings
- Bushings: Natural Rubber
- Internal Design: Twin tube
- Boot Included: Yes
- Bushings Included: Yes, top and bottom, front and rear
- Reuse original coil spring or buy new Dobinsons springs
Rated 5.00 out of 5
(13 reviews)
Original price was: $660.00.Current price is: $561.00. Select options
Brake Lines + Bump Stops - Lexus GX460
FREE SHIPPING
within 48 US States
Timbren Bump Stops Front & Rear | Lexus GX460
- Suits 2010-2023+ Lexus GX460
- Includes both Front and Rear bump stops for the whole vehicle
- Active Off-Road Bumpstops provide off-road enthusiasts greater control over their vehicles’ suspension travel. Using progressive-rate springs means that instead of a hard stop at the end of axle travel the axle energy will be absorbed when bottoming-out producing smooth, predictable, and quiet axle engagement and disengagement.
- Unlike OEM bump stops, Active Off-Road Bumpstops are made from natural rubber. Just like our Timbren SES line, Active Off-Road Bumpstops carry a lifetime warranty and a satisfaction guarantee.
- ABSTORSEQ replaces the rear OEM bump stops and ABSTOF replaces the fronts on the Lexus GX460. Upgrade to Active Off-road Bumpstops and experience the difference.
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation
- Satisfaction Guarantee
- Lifetime Warranty
- Front Instructions and Rear Instructions
Rated 5.00 out of 5
(12 reviews)
$538.72 Add to cart
Bump Stops - Tundra 2022+
FREE SHIPPING
within 48 US States
Timbren Bump Stops Front & Rear | Tundra Sequoia LC250
- Suits the 2022-2024+ Toyota Tundra, 2023-2024+ Sequoia, 2024+ Land Cruiser 250
- Includes both Front and Rear bump stops for the whole vehicle
- Active Off-Road Bump stops provide off-road enthusiasts greater control over their vehicles’ suspension travel. Using progressive-rate springs means that instead of a hard stop at the end of axle travel the axle energy will be absorbed when bottoming-out producing smooth, predictable, and quiet axle engagement and disengagement.
- Unlike OEM bump stops, Active Off-Road Bumpstops are made from natural rubber. Just like our Timbren SES line, Active Off-Road Bumpstops carry a lifetime warranty and a satisfaction guarantee.
- ABSTORTNDR replaces the rear OEM bump stops and ABSTOF replaces the fronts
- Upgrade to Active Off-road Bump stops and experience the difference
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation
- Satisfaction Guarantee
- Lifetime Warranty
- Front Instructions and Rear Instructions
Rated 5.00 out of 5
(12 reviews)
$538.72 Add to cart
Sale!
80 Series Land Cruiser (1990-1997)
On Sale All November!!
Toyota FJ80 Knuckle Rebuild Kit with Bearings
- Suits Toyota Land Cruiser 80 Series and Lexus LX450 (all years)
- Our FJ80 knuckle rebuild kit contains all of the replacement parts you need to service your steering knuckles including gaskets, felts, seals, spindle nut & washers, and shims
- New spindle bushings, trunnion bearings, and steel outer felt covers are also included
- The stamped steel outer felt covers are not found in other most other kits
- If you’re using your FJ80 in the rocks you will want to replace these covers when you service the knuckles
- The FJ80 Knuckle kit has all the parts you need to service both left and right knuckles
- Includes new wheel bearings
Rated 5.00 out of 5
(9 reviews)
Original price was: $219.99.Current price is: $186.99. Add to cart
Sale!
Full Suspension Kits - Sequoia 2nd Gen
FREE SHIPPING
within 48 US States
On Sale All November!!
Dobinsons 2.0-3.0″ 3-Way Adjustable MRA Coilovers for Toyota Sequoia 2008-2022
- Suits Toyota Sequoia 2008-2022 Models with 5.7L V8 Gas Engine
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- Looking for a quick and easy way to lift your Sequoia? This is your answer
- Coils are teal. Struts are black
- Includes C92-3016650 Front Coil Springs, Inner Diameter – 3.0″, Length – 16″, Spring Rate – 650lb/in
- All are assembled at the standard coil seat height, you adjust on the vehicle to the height you’d like
- The Dobinsons MRA Coilovers will come pre-assembled with new struts, coils and top mounts and hardware
- Fully rebuildable and re-valvable
- SOLD IN PAIRS – READY TO BOLT IN
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Requires lower mount clearancing to fit the larger lower leg of the new coilover (see attached photo)
- See attached photo for correct hose routing
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Front coilover assembly instructions
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle
- New UCA’s are required for proper coilover and hose clearance, see all options
- Aftermarket wheels with +18 Offset or less REQUIRED to avoid reservoir + hose rubbing at full lock
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
Rated 5.00 out of 5
(2 reviews)
Original price was: $2,185.00.Current price is: $1,876.00. Select options
Sale!
Sequoia 3rd Gen (2023-2024+)
On Sale All November!!
Dobinsons C59-819V Rear Coil Springs Pair
- Dobinsons C59-819V Rear Coils for the 2023+ Toyota Sequoia and 2022+ Land Cruiser 300 Series (30mm lift)
- Lifts the Sequoia 1.0″ with Stock Weight on a standard model and 0″ with stock weight on a TRD Pro (TRD Pro comes 1″ lifted from the factory)
- Also suits 2024+ Land Cruiser 250 – 1.6″ Lift with 550-770LBS constant rear added weight
- Suits 2024+ Tacoma – 2.25″ lift with 175-330lbs constant weight added, 1.25″ lift with 440-660lbs constant weight added.
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- Variable Rate Coils
- Longer shocks are necessary at this lift height
- Select from Twin Tube, IMS Monotube or MRA 3-Way Adjustable with Remote Resi
Rated 5.00 out of 5
(15 reviews)
Original price was: $270.00.Current price is: $229.50. Select options
Sale!
Frontier D41 2022+
FREE SHIPPING
within 48 US States
On Sale All November!!
Dobinsons MRA45-A653 3-Way Adjustable Rear Shocks Pair | 2022+ Nissan Frontier
- Suits 2022-2024+ Nissan D41 Frontier
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI CNC machined components for precise tolerances
- Parker Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile
- strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Sold in Pairs
Rated 5.00 out of 5
(13 reviews)
Original price was: $1,150.00.Current price is: $977.50. Add to cart
Sale!
Full Suspension Kits - Xterra
On Sale All November!!
Dobinsons 2.5″ Lift IMS Extended Travel Coilovers for Nissan Xterra 05+
- Extended Travel Coilovers Suit Nissan Xterra (2005-2015) 4×4 Models – Lifts 2.5″ over stock
- These extended travel struts REQUIRE aftermarket UCA’s for full travel, like Dobinsons
- Looking for a quick and easy way to lift your Xterra? This is your answer
- Dobinsons IMS are height adjustable by a fully threaded body
- The Dobinsons IMS Coilovers will come pre-assembled with new struts, coils and top mounts
- Fully rebuildable and re-valvable
- SOLD IN PAIRS – READY TO BOLT IN
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Length specs – 278mm compressed and 410mm extended
- Photos for illustration purposes
- Instructions for setting coil seat height
- Link to the matching rear shocks
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
Rated 5.00 out of 5
(2 reviews)
Original price was: $1,165.00.Current price is: $1,009.00. Select options
Sale!
Dobinsons
On Sale All November!!
Dobinsons Suzuki Camber Bolt Kit
- Suits these vehicles: Suzuki Sidekick 1988-1998, Suzuki Escudo 1988-1998, Geo Tracker 1988-1998, Suzuki Grand Vitara 1998-2005, Suzuki Escudo 1998-2005, Suzuki XL7 2001-2005
- ±1.2° for Lower Control Arm Camber Adjustment, 14mm bolt size
- Essential when lifting Vehicles
- Easy to adjust and set once installed
- Includes Instructions
Rated 5.00 out of 5
(4 reviews)
Original price was: $60.00.Current price is: $51.00. Add to cart
Sale!
Tundra 3rd Gen (2022-2024)
On Sale All November!!
Dobinsons Adjustable Rear Lower Control Arms Pair for Tundra + Tacoma
- Suits all 2022+ Toyota Tundra and 2024+ Toyota Tacoma
- Comes with high quality rubber OE style bushings installed for maximum flexibility, and zero noise
- Made from HSLA (High Strength Low Alloy) Steel
- 40mm OD and 6mm wall thickness with support brace
- Oversized adjusters and rod thickness for maximum strength and durability with double-nut locking feature
- Zinc plated, then E-coated black, for the ultimate finish and protection
- Sold as a pair
Rated 5.00 out of 5
(4 reviews)
Original price was: $445.00.Current price is: $378.25. Add to cart
Sale!
Tundra 3rd Gen (2022-2024)
On Sale All November!!
Dobinsons Front Coil Spring Options | Toyota Tundra 2022+ – Pair
- Suits Toyota Tundra 2022-2024+, choose the appropriate lift height that also matches any added weight you’ve put on the truck
- Intended to be run with Dobinsons front struts
- Hybrid Models lift 1-1.5″ less lift than listed here
- These will NOT suit a TRD PRO Strut, they’re a different size
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
Rated 5.00 out of 5
(12 reviews)
Original price was: $305.00.Current price is: $259.25. Select options
Snorkel
Safari Snorkel for Land Cruiser 80 Series Snorkel 1991-1997
- Suits Toyota Land Cruiser 80 Series 1991-1997 and Lexus LX450
- Relocates Your Engine’s Air Intake Point to a Higher Location
- Crosslinked Polyethylene Construction
- Built to Perform in Extreme Weather Conditions
- Comes With Stainless Steel and Plated Hardware
- Bolt-On Installation; Drilling Is Required
- Supported by a 2-Year Warranty
- Fully Designed and Manufactured in Australia
- Designed and manufactured in Australia
- Requires cutting and drilling of the fender and A-pillar. Full instructions and template provided.
- We also offer the Dobinsons Snorkel
Rated 5.00 out of 5
(23 reviews)
$377.00 Add to cart
Sale!
All Pro Offroad
FREE SHIPPING
within 48 US States
On Sale All November!!
Toyota Tundra Overland Tailgate Table (2022+)
- The stock tailgate panel is a wasted opportunity that you can easily correct with the All-Pro Off-Road Overland Tailgate Table.
- The All-Pro Off-Road Overland Tailgate Table turns your opened tailgate into a multi-functional platform for all of your overlanding, camping, fishing, and hunting needs.
- The durable food-grade polyethylene cover can be used as a cutting board while supporting your favorite camp stove.
- A slot on the left side and cup-holders on the right side prevent items from rolling away.
- Requiring only basic hand tools, reusing original hardware, and 3-minutes of time, this is one of the easiest modifications you will ever make on your truck and one every Tundra owner should do.
- Features a ruler in 1-inch (imperial) increments along the edge of the table adding convenience when measuring fish, rope, etc.
- Made in 2 different styles, choose from the divided cutting board configuration, or the smooth configuration with only round cutouts on the end.
- Thickness is right at 1/2″
- Scroll down on the page to see a full product video!!
- Made in the USA, in sunny California!!
Rated 5.00 out of 5
(6 reviews)
Original price was: $320.00.Current price is: $272.00. Select options
Sale!
All Pro Offroad
FREE SHIPPING
within 48 US States
On Sale All November!!
Body Mount Relocation Kit | Toyota Tacoma 2016-2023
- Suits Toyota Tacoma 2016-2023
- 1/4″ Thick CNC cut and formed steel
- Design includes guard for body mount bushing and bolt
- Moves body mount completely behind the firewall
- Instructions available
- Product requires welding for installation. Welding should be done by an experienced welder
- Installation Instructions
Rated 5.00 out of 5
(3 reviews)
Original price was: $150.00.Current price is: $127.50. Add to cart
Sale!
Accessories
On Sale All November!!
RCI Rear FJ Cruiser Diff Skid Plate
- Suits Toyota FJ Cruiser – all years
- Protects the low hanging rear differential
- Clamps directly to axle housing for an easy no drill install
- Hugs differential tightly, within 1/4″ for minimal loss in ground clearance.
- Black powder coated for rust resistant, durable and high quality finish
- Design incorporates drain holes for water and dirt to escape, as well as allow full access to the differential drain plug
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- MADE IN THE USA
Rated 5.00 out of 5
(4 reviews)
Original price was: $324.99.Current price is: $276.00. Add to cart
Sale!
200 Series Land Cruiser ARMORED
On Sale All November!!
Dobinsons Rear Monster Shocks Pair for Armored Land Cruiser 200 Series XHD
- Made for Armored Vehicles ONLY – Level B6 or B7 Armored Toyota Land Cruiser 200 Series
- Mammoth 70mm body housing with a massive volume of high quality German shock oil
- 20mm Diameter heavy duty chrome piston rods
- 45mm Extra Large Pistons
- 4mm Heavy Duty Wall thickness, double the thickness of regular shock walls
- Threaded adjustable spring seat height for adjustment and additional heat dissipation
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- See all suitable armored coil spring options HERE
- Sold in Pairs
Rated 5.00 out of 5
(9 reviews)
Original price was: $500.00.Current price is: $425.00. Add to cart
Sale!
Pickup / Hilux (1979-1985)
On Sale All November!!
Dobinsons Front U-Bolts – 2 Pairs – 1979-1985 Toyota Pickup/4Runner Front
- Combination kit of front u-bolts for 1979-1985 Toyota Pickup (Hilux) and 4Runner Front ends
- This is a combination with a pair of UB59-449-3K and a pair of UB59-667K, as they’re different on one side than the other.
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Includes 4 U-bolts, enough for 1 vehicle
- Requires 2″ lift leaf springs to ensure proper fitment
- Photo for illustration purposes only. These are round and square at the top to suit the axle properly
(0 reviews)
Original price was: $100.00.Current price is: $85.00. Add to cart
Sale!
Suspension
FREE SHIPPING
within 48 US States
On Sale All November!!
Dobinsons MRA59-A711 3-Way Adjustable MRA Rear Shocks Pair | Tundra 2007-2021
- 3-way adjustable valving – Adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
Rated 5.00 out of 5
(16 reviews)
Original price was: $1,350.00.Current price is: $1,147.50. Add to cart
Sale!
4Runner 5th Gen (2010-2024)
On Sale All November!!
Dobinsons Front Winch Bumper for Toyota 4Runner 2014-2024
- Suits 5th Gen Toyota 4Runner from 2014-2024 (will not fit 2010-2013)
- Winch compatible, up to 12,000 LB winches
- Driving Light Mounts
- Optional Fog Lights – Here for more details
- Optional Front Driving Lights (as shown in photos) – Here for more details
- Cutting of the original front plastic bumper is required
- Heavy Duty Black Powder Coat Finish
- 3mm Thick Main Body, 4mm + 5mm Thick Bracket, 1.6mm Bash Plates, 51mm top tubes
- Includes LED Turn Signals and all Required Hardware for Installation
- Separate Winch Cradle System, making installation faster. (does not include winch)
- Supplied Black, but can be painted by your paint shop
- Suits 10,000 and 12,000 LB Low Mount Winches – requires offset fairlead
- Installation Instructions
- Truck freight shipping is usually to the nearest freight terminal, or commercial address with forklift
- Ships to the nearest freight terminal on a pallet for you to pick up, unless you add home delivery. We will be in touch with that delivery address
Rated 5.00 out of 5
(3 reviews)
Original price was: $2,075.00.Current price is: $1,763.75. Select options
Sale!
Tundra 3rd Gen (2022-2024)
On Sale All November!!
Dobinsons Twin Tube Rear Shocks Pair | Toyota Tundra 2022+
- Suits the rear of a 2022+ Toyota Tundra with 2-2.5″ of Lift
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings
- Double Chrome hardened rods
- Metal shock boot to protect rod from damage
- Sold in Pairs
Rated 5.00 out of 5
(8 reviews)
Original price was: $350.00.Current price is: $297.50. Add to cart
Sale!
Full Suspension Kits - 200 Series
On Sale All November!!
Dobinsons 1-2.5″ Pre-Assembled IMS Coilovers for Toyota Land Cruiser 200 Series
- Suits Toyota Land Cruiser 200 Series and Lexus LX570 2008-2021 Models with 5.7L V8 Gas Engine
- Looking for a quick and easy way to lift your 200 Series? This is your answer
- Select your desired lift height and tell us your weight – we’ll take care of the rest!!
- Dobinsons IMS are height adjustable by a fully threaded body
- The Dobinsons IMS Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
- Fully rebuildable and re-valvable
- 606mm extended, 438mm compressed
- SOLD IN PAIRS – READY TO BOLT IN
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Photos for illustration purposes
- Instructions for setting coil seat height
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle. Adding 2.5″ or more lift, new UCA’s should be added for proper articulation and correct wheel alignment
- Link to Matching rear shocks
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
Rated 5.00 out of 5
(8 reviews)
Original price was: $1,235.00.Current price is: $1,068.50. Select options