Your cart is currently empty!
Shop
Showing 1201–1230 of 2002 resultsSorted by popularity
-
GX460 (2010-2023)FREE SHIPPING
within 48 US StatesAluminum Gas Tank Skid Plate | 2003-2024 4Runner GX470 GX460
- Fits all Lexus GX470 and GX460 Models, and all 4th and 5th Gen Toyota 4Runner 2003-2024
- This Gas Tank Skid Plate is manufactured from high-quality laser-cut 1/4″ aluminum, providing the optimal balance between strength and weight.
- Replaces the original steel skid plate.
- Cleverly engineered to provide optimal protection to the fuel tank. Recommended using as a part of Asfir’s Toyota or Lexus complete underbody protection kit.
- Designed specifically to complement the vehicle’s structure, minimize clearance loss.
- Built with stiffening and reinforcing ribs to provide even greater strength where required.
- Directly bolted onto the vehicle’s chassis and supported by zinc-coated steel brackets to ensure maximum durability.
- Designed with air vents to reduce heat build-up alongside drain holes to allow easy removal of pebbles, dirt, or water that may get caught between the skid and the vehicle while offroading.
- No cutting or drilling is required. Completely bolt-on.
- Installation Instructions
- The package includes all needed hardware.
- Weighs in at 11 kg (24 lb).
- Proudly made in Israel.
(4 reviews) -
Sale!Skids + Sliders - Lexus GX460FREE SHIPPING
within 48 US StatesLexus GX460 Skid Plate Kit Aluminum (4 Pcs)
- Suits 2010-2023 Lexus GX460
- Does not suit models with a diff drop kit
- The Lexus GX460 Underbody Protection Kit (4 Pcs) contains a Front skid plate (534153), a Gearbox skid plate (534460), Transfer Case Skid Plate (534165), and Exhaust Skid Plate (558180).
- The Lexus GX460 Underbody Protection Kit is constructed using high-quality laser-cut 1/4″ aluminum, providing maximum strength with minimum added weight.
- Cleverly engineered to provide optimal protection to the transfer case.
- Designed specifically to complement the Wrangler JL’s structure, and minimize clearance loss.
- Built with stiffening and reinforcing ribs to provide even greater strength where required.
- Directly bolted onto the vehicle’s chassis and supported by zinc-coated steel brackets to ensure maximum durability.
- Designed with ventilation openings to reduce heat build-up alongside drain holes to ensure easy removal of pebbles, dirt, or water that may get caught between the skid and the vehicle while offroading.
- No cutting or drilling is required. Completely bolt-on.
- The package includes all needed hardware.
- Weighs in at 23 kg (51 lbs).
- Proudly made in Israel.
- We offer an Aluminum Gas Tank Skid Plate as well
(2 reviews) -
Sale!Skid Plates + Sliders - 4th Gen 4RunnerFREE SHIPPING
within 48 US StatesToyota 4th Gen V6 2003-2009 4Runner Skid Plate Kit Aluminum (4 Pcs)
- Suits 2003-2009 Toyota 4Runner 4×4 V6 (will not suit V8’s)
- Does NOT fit on vehicles with KDSS or those that use a Diff-Drop
- The 4Runner Full Underbody Protection Kit (4 Pcs) contains A Front skid plate (560055), a Transmission/Gearbox skid plate (534161 ), a Fuel Tank skid plate (534172), and an Exhaust skid plate (558180).
- Manufactured from high-quality laser-cut 1/4″ aluminum, it provides the optimal balance between strength and weight.
- Cleverly engineered to provide optimal protection to vulnerable under-vehicle components.
- Designed specifically to complement the 4Runner’s structure, and minimize clearance loss.
- Built with stiffening and reinforcing ribs to provide even greater strength where needed.
- Directly bolted onto the vehicle’s chassis and supported by zinc-coated steel brackets to ensure maximum durability.
- Designed with ventilation openings to reduce heat build-up alongside drain holes to assure easy removal of pebbles, dirt, or water that may get caught between the skid and the vehicle while offroading.
- No cutting or drilling is required. Completely bolt-on.
- The package includes all the needed hardware.
- Weighs in at 30 kg (66 lbs).
- Proudly made in Israel.
(3 reviews) -
Sale!Skids + Sliders - Lexus GX470FREE SHIPPING
within 48 US StatesLexus GX470 Skid Plate Kit Aluminum (3 Pcs)
- Suits 2003-2009 Lexus GX470 and Prado 120 gas models (without KDSS) LWB Wagons
- Does not suit models with KDSS or a diff drop kit
- The Lexus GX470 / Toyota Land Cruiser Prado 120 Full Underbody Armor (3 Pcs) | Non-KDSS contains: Gearbox & Transfer Case skid plate (560061), Front skid plate (560055), and Fuel Tank skid plate (560070 / 560071)
- The Lexus GX470 / Toyota Land Cruiser Prado 120 Full Underbody Protection Kit is constructed using high-quality laser-cut 1/4″ aluminum, providing maximum strength with minimum added weight.
- Cleverly engineered to provide optimal protection to the transfer case.
- Designed specifically to complement the vehicle’s structure, and minimize clearance loss.
- Built with stiffening and reinforcing ribs to provide even greater strength where required.
- Directly bolted onto the vehicle’s chassis and supported by zinc-coated steel brackets to ensure maximum durability.
- Designed with ventilation openings to reduce heat build-up alongside drain holes to ensure easy removal of pebbles, dirt, or water that may get caught between the skid and the vehicle while offroading.
- No cutting or drilling is required. Completely bolt-on.
- The package includes all the needed hardware.
- Weighs in at 38 kg (84 lbs).
- Proudly made in Israel.
(3 reviews) -
Sale!Skid Plates + Sliders - 5th Gen 4RunnerFREE SHIPPING
within 48 US StatesToyota 4Runner 5th Gen 2010-24 Full Skid Plate Kit Aluminum (5 Pcs) | with KDSS
- Suits 2010-2024 Toyota 4Runner 4×4 V6 with KDSS sway bars (see photo for identification)
- Does NOT fit on vehicles without KDSS or those that use a Diff-Drop
- For vehicles without KDSS, look at this OTHER PAGE instead
- The 4Runner Full Underbody Protection Kit (5 Pcs) contains A Front KDSS-compatible skid plate (534153), a Transmission/Gearbox skid plate (534161), a Transfer Case skid plate (534165), a Fuel Tank skid plate (534172), and an Exhaust skid plate (558180).
- Manufactured from high-quality laser-cut 1/4″ aluminum, providing the optimal balance between strength and weight.
- Cleverly engineered to provide optimal protection to vulnerable under-vehicle components.
- Designed specifically to complement the 4Runner’s structure, and minimize clearance loss.
- Built with stiffening and reinforcing ribs to provide even greater strength where needed.
- Directly bolted onto the vehicle’s chassis and supported by zinc-coated steel brackets to ensure maximum durability.
- Designed with ventilation openings to reduce heat build-up alongside drain holes to assure easy removal of pebbles, dirt, or water that may get caught between the skid and the vehicle while offroading.
- No cutting or drilling is required. Completely bolt-on.
- The package includes all the needed hardware.
- Weighs in at 33 kg (73 lbs).
- Proudly made in Israel.
(5 reviews) -
Sale!Skid Plates + Sliders - 5th Gen 4RunnerFREE SHIPPING
within 48 US StatesToyota 4Runner 5th Gen 2010-24 Full Skid Plate Kit Aluminum (5 Pcs) | Non-KDSS
- Suits 2010-2024 Toyota 4Runner 4×4 V6 without KDSS sway bars (see photo for identification)
- Does NOT fit on vehicles with KDSS or those that use a Diff-Drop
- For vehicles with KDSS, go to this OTHER PAGE instead
- The 4Runner Full Underbody Protection Kit (5 Pcs) contains A Front skid plate (534155), a Transmission/Gearbox skid plate (534161), a Transfer Case skid plate (534165), a Fuel Tank skid plate (534172), and an Exhaust skid plate (558180), optional to add bumper Filler Plate (558156).
- Manufactured from high-quality laser-cut 1/4″ aluminum, providing the optimal balance between strength and weight.
- Cleverly engineered to provide optimal protection to vulnerable under-vehicle components.
- Designed specifically to complement the 4Runner’s structure, and minimize clearance loss.
- Built with stiffening and reinforcing ribs to provide even greater strength where needed.
- Directly bolted onto the vehicle’s chassis and supported by zinc-coated steel brackets to ensure maximum durability.
- Designed with ventilation openings to reduce heat build-up alongside drain holes to assure easy removal of pebbles, dirt, or water that may get caught between the skid and the vehicle while offroading.
- No cutting or drilling is required. Completely bolt-on.
- The package includes all the needed hardware.
- Weighs in at 34 kg (75 lbs).
- Proudly made in Israel.
(4 reviews) -
Sale!Skid PlatesFREE SHIPPING
within 48 US StatesLX450 & Toyota Land Cruiser 80 Series Skid Plate Kit Aluminum (3 Pcs)
- Suits 1991-1997 Lexus LX450 and Toyota Land Cruiser 80 Series Gasoline Engine Models
- The Toyota Land Cruiser 80 Full Underbody Armor (3 Pcs) contains a Transfer Case skid plate (534265), Engine skid plate (534255), and Gearbox skid plate (534260).
- Manufactured from high-quality laser-cut 1/4″ aluminum, providing the optimal balance between strength and weight.
- Cleverly engineered to provide optimal protection to vulnerable under-vehicle components.
- Designed specifically to complement the Land Cruiser 80’s structure, and minimize clearance loss.
- Built with stiffening and reinforcing ribs to provide even greater strength where needed.
- Directly bolted onto the vehicle’s chassis and supported by zinc-coated steel brackets to ensure maximum durability.
- Designed with ventilation openings to reduce heat build-up alongside drain holes to assure easy removal of pebbles, dirt, or water that may get caught between the skid and the vehicle while offroading.
- Fits only on OEM standard vehicle.
- No cutting or drilling is required. Completely bolt-on.
- The package includes all the needed hardware.
- Weighs in at 20 kg (44 lbs).
- Proudly made in Israel.
(5 reviews) -
Sale!Skid PlatesFREE SHIPPING
within 48 US StatesLexus LX570 & Land Cruiser 200 Series Skid Plate Set Aluminum (4 Pcs)
- Suits 2008-2021 Toyota Land Cruiser 200 Series and Lexus LX570 Gas & Diesel Engines
- The Toyota Land Cruiser 200 Series Underbody Armor (4 Pcs) contains A Front skid plate (558056), a Gearbox skid plate (558064) or (558069) Gearbox & Catalytic Converter Skid Plate (make your choice below) and a Transfer Case skid plate (558068) and a Fuel Tank skid plate (558071).
- Also available as a 3-piece skid set without the fuel tank skid plate
- They are manufactured from high-quality laser-cut 1/4″ aluminum, providing the optimal balance between strength and weight.
- Cleverly engineered to provide optimal protection to vulnerable under-vehicle components.
- Explicitly designed to complement the Land Cruiser 200’s structure, and minimize clearance loss.
- Built with stiffening and reinforcing ribs to provide even greater strength where needed.
- Directly bolted onto the vehicle’s chassis and supported by zinc-coated steel brackets to ensure maximum durability.
- Designed with ventilation openings to reduce heat build-up alongside drain holes to assure easy removal of pebbles, dirt, or water that may get caught between the skid and the vehicle while offroading.
- No cutting or drilling is required. Completely bolt-on.
- The package includes all the needed hardware.
- Weighs in at 41 kg (90 lbs).
- Proudly made in Israel.
(3 reviews) -
Sale!Skid PlatesFREE SHIPPING
within 48 US StatesLexus LX570 & Land Cruiser 200 Series Skid Plate Set Aluminum (3 Pcs)
- Suits 2008-2021 Toyota Land Cruiser 200 Series and Lexus LX570 Gas & Diesel Engines
- The Toyota Land Cruiser 200 Series Underbody Armor (3 Pcs) contains A Front skid plate (558056), a Gearbox skid plate (558064) or (558069) Gearbox & Catalytic Converter Skid Plate (make your choice below) and a Transfer Case skid plate (558068).
- Also sold as a 4 piece kit with a fuel tank skid plate
- They are manufactured from high-quality laser-cut 1/4″ aluminum, providing the optimal balance between strength and weight.
- Cleverly engineered to provide optimal protection to vulnerable under-vehicle components.
- Explicitly designed to complement the Land Cruiser 200’s structure, and minimize clearance loss.
- Built with stiffening and reinforcing ribs to provide even greater strength where needed.
- Directly bolted onto the vehicle’s chassis and supported by zinc-coated steel brackets to ensure maximum durability.
- Designed with ventilation openings to reduce heat build-up alongside drain holes to assure easy removal of pebbles, dirt, or water that may get caught between the skid and the vehicle while offroading.
- No cutting or drilling is required. Completely bolt-on.
- The package includes all the needed hardware.
- Weighs in at 28.5 kg (62 lbs).
- Proudly made in Israel.
(3 reviews) -
Sale!Skid PlatesFREE SHIPPING
within 48 US StatesLexus LX470 & Land Cruiser 100 Series Skid Plate Set Aluminum (4 Pcs)
- Suits 1998-2007 Toyota Land Cruiser 100 Series and Lexus LX470 4.7L V8 Gasoline Engines
- The Lexus LX 470 / Land Cruiser 100 Skid Plate Kit (4 Pcs) contains a Front skid plate (558055), Transmission skid plate (558063), Transfer Case skid plate (558067), Fuel Tank skid plate (534470).
- There is also a 3pc set without the fuel tank skid plate included
- Manufactured from high-quality laser-cut 1/4″ aluminum, providing the optimal balance between strength and weight.
- Cleverly engineered to provide optimal protection to vulnerable under-vehicle components.
- Designed specifically to complement the Land Cruiser 100’s structure, and minimize clearance loss.
- Built with stiffening and reinforcing ribs to provide even greater strength where needed.
- Directly bolted onto the vehicle’s chassis and supported by zinc-coated steel brackets to ensure maximum durability.
- Designed with ventilation openings to reduce heat build-up alongside drain holes to assure easy removal of pebbles, dirt, or water that may get caught between the skid and the vehicle while offroading.
- No cutting or drilling is required. Completely bolt-on.
- The package includes all the needed hardware.
- Weighs in at 47.7 kg (105 lb).
- Proudly made in Israel.
(3 reviews) -
Sale!Skid PlatesFREE SHIPPING
within 48 US StatesLexus LX470 & Land Cruiser 100 Series Skid Plate Set Aluminum (3 Pcs)
- Suits 1998-2007 Toyota Land Cruiser 100 Series and Lexus LX470 4.7L V8 Gasoline Engines
- The Toyota Land Cruiser 100 / LX 470 Skid Plate (3 Pcs) contains: Front skid plate (558055), Transmission skid plate (558063), Transfer Case skid plate (558067)
- There is also a 4pc set with a fuel tank skid plate included
- Manufactured from high-quality laser-cut 1/4″ aluminum, providing the optimal balance between strength and weight.
- Cleverly engineered to provide optimal protection to vulnerable under-vehicle components.
- Designed specifically to complement the Land Cruiser 100’s structure, and minimize clearance loss.
- Built with stiffening and reinforcing ribs to provide even greater strength where needed.
- Directly bolted onto the vehicle’s chassis and supported by zinc-coated steel brackets to ensure maximum durability.
- Designed with ventilation openings to reduce heat build-up alongside drain holes to assure easy removal of pebbles, dirt, or water that may get caught between the skid and the vehicle while offroading.
- No cutting or drilling is required. Completely bolt-on.
- The package includes all the needed hardware.
- Weighs in at 37.7 kg (83 lb).
- Proudly made in Israel.
(3 reviews) -
ExceptionsFREE SHIPPING
within 48 US StatesPowerbrake D-Line HP Rotor and Pad Kit | Sequoia 01-07 Rear
- Suits Toyota Sequoia 2001-2007 Rear
- Also available for the FRONT
- Powerbrake D-Line Features
- Rotors are cast from a proprietary high carbon cast-iron alloy.
- Rotors are machined to tolerances up to three times tighter than the industry norm.
- All Powerbrake rotors feature our MTR (Max Temperature Recording) system.
- Proprietary black disc surface coating ensures quicker bed-in and max brake performance.
- Spiral slots on the rotor fiction surface clear friction gasses, debris and water.
- Matched high friction PB05 brake pads take the guesswork out of pad selection.
- Pad compound PB05 is manufactured in Japan and has been specifically formulated for use on 4×4 vehicles
- Powerbrake D-Line Benefits at a Glance
- Reduced stopping distances in both wet and dry conditions.
- Reduced brake fade and improved brake consistency.
- Improved initial brake response (bite).
- Improved brake modulation particularly during emergency stops.
- Improved resistance to rotor distortion (warping) and cracking at high temperatures.
- What’s Included in Powerbrake D-Line?
- 2 x Standard OEM diameter high performance slotted rotors for your 4WD or truck – Made in South Africa.
- An axle set of matched PB05 high-performance brake pads – Made in Japan.
- Fits as per a standard rotor and pad change, using the vehicle’s original calipers.
(7 reviews) -
BrakesFREE SHIPPING
within 48 US StatesPowerbrake X-Line Front Mercedes Sprinter Big Brake Kit 2019+
Suits 2019-2024+ Mercedes Sprinter Van AWD (all wheel drive) 1500, 2500 and 3500 Big Brake Kit Includes:
- X-Line billet 6-piston off-road calipers (pair)
- High-performance brake pads, pre-loaded into the calipers
- 2-Piece 13.7″ rotors with 72-vane discs
- Semi-float disc drive system allows for radial disc expansion and contraction
- Curved, directional cooling vanes
- Billet caliper mounting brackets
- Stainless steel braided brake lines
- All necessary mounting hardware for quick, easy bolt-on installation
- Comprehensive fitment and bed-in instructions
- Now Includes Upgraded Powerbrake Pads, PB05 Compound – highest level 4×4 brake pads available – made in Japan
- Manufactured, finished and packaged 100% in South Africa
(0 reviews)$3,800.00 Select options This product has multiple variants. The options may be chosen on the product page -
ExceptionsFREE SHIPPING
within 48 US StatesPowerbrake Rear D-Line HP Rotor and Pad Kit | Tundra 22+, Sequoia 23+
- Suits the rear of Toyota Tundra 2022-2025+ and Toyota Sequoia 2023-2025+
- Also offered for the FRONT
- Powerbrake D-Line Features
- Rotors are cast from a proprietary high carbon cast-iron alloy.
- Rotors are machined to tolerances up to three times tighter than the industry norm.
- All Powerbrake rotors feature our MTR (Max Temperature Recording) system.
- Proprietary black disc surface coating ensures quicker bed-in and max brake performance.
- Spiral slots on the rotor fiction surface clear friction gasses, debris and water.
- Matched high friction PB05 brake pads take the guesswork out of pad selection.
- Pad compound PB05 is manufactured in Japan and has been specifically formulated for use on 4×4 vehicles
- Powerbrake D-Line Benefits at a Glance
- Reduced stopping distances in both wet and dry conditions.
- Reduced brake fade and improved brake consistency.
- Improved initial brake response (bite).
- Improved brake modulation particularly during emergency stops.
- Improved resistance to rotor distortion (warping) and cracking at high temperatures.
- What’s Included in Powerbrake D-Line?
- 2 x Standard OEM diameter high performance slotted rotors for your 4WD or truck – Made in South Africa.
- An axle set of matched PB05 high-performance brake pads – Made in Japan.
- Fits as per a standard rotor and pad change, using the vehicle’s original calipers.
(0 reviews) -
ExceptionsFREE SHIPPING
within 48 US StatesPowerbrake Front D-Line HP Rotor and Pad Kit | Tundra 22+, Sequoia 23+
- Suits the front of Toyota Tundra 2022-2025+ and Toyota Sequoia 2023-2025+
- Also offered for the REAR
- Powerbrake D-Line Features
- Rotors are cast from a proprietary high carbon cast-iron alloy.
- Rotors are machined to tolerances up to three times tighter than the industry norm.
- All Powerbrake rotors feature our MTR (Max Temperature Recording) system.
- Proprietary black disc surface coating ensures quicker bed-in and max brake performance.
- Spiral slots on the rotor fiction surface clear friction gasses, debris and water.
- Matched high friction PB05 brake pads take the guesswork out of pad selection.
- Pad compound PB05 is manufactured in Japan and has been specifically formulated for use on 4×4 vehicles
- Powerbrake D-Line Benefits at a Glance
- Reduced stopping distances in both wet and dry conditions.
- Reduced brake fade and improved brake consistency.
- Improved initial brake response (bite).
- Improved brake modulation particularly during emergency stops.
- Improved resistance to rotor distortion (warping) and cracking at high temperatures.
- What’s Included in Powerbrake D-Line?
- 2 x Standard OEM diameter high performance slotted rotors for your 4WD or truck – Made in South Africa.
- An axle set of matched PB05 high-performance brake pads – Made in Japan.
- Fits as per a standard rotor and pad change, using the vehicle’s original calipers.
(0 reviews) -
Dobinsons
Dobinsons Coil Spring Silencer
- For +-17mm Wire Diameter Coil Springs
- Measure the thickness of the wire on your coil springs before ordering
- Offered in 2 different sizes for different inner diameter (ID) coil springs
- Suits 102-124mm (4.0″ – 4.88″) ID Coil Springs
- Suits 130mm -146mm (5.1″ – 5.75″) ID Coil Springs
- To be installed in the softer section of a variable rate coil spring. (The part of the coil spring that collapses first, up top)
- Made from High-Durometer Rubber
- Has adhesive inside to stay in place
- Sold INDIVIDUALLY, order 2 for 2 coil springs
(0 reviews)$10.00 Select options This product has multiple variants. The options may be chosen on the product page -
Ineos GrenadierFREE SHIPPING
within 48 US StatesPowerbrake X-Line Front Ineos Grenadier Big Brake Kit
2023+ Ineos Grenadier Big Brake Kit Includes:
- X-Line billet 6-piston off-road calipers (pair)
- High-performance brake pads, pre-loaded into the calipers
- 2-Piece 13.7″ x 1.34″ 72-vane discs
- Semi-float disc drive system allows for radial disc expansion and contraction
- Curved, directional cooling vanes
- Billet caliper mounting brackets
- Stainless steel braided brake lines
- All necessary mounting hardware for quick, easy bolt-on installation
- Comprehensive fitment and bed-in instructions
- Includes Upgraded Powerbrake Pads, PB05 Compound – highest level 4×4 brake pads available – made in Japan
- Manufactured, finished and packaged 100% in South Africa
- Works with 17″ and bigger wheels
(0 reviews)$3,850.00 Select options This product has multiple variants. The options may be chosen on the product page -
80 Series Land Cruiser (1990-1997)
Dobinsons C97-485VT Dual Rate 4.0″ Rear Coils | 80 Series 1990-1997 – Pair
- Suits Land Cruiser 80 Series and Lexus LX450
- Lifts 4.0″ with a heavy load rear end of 300-400LBS of added weight (bumper, drawers, tent, etc). Lifts more without added weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- VT Series Dual Rate Coils for maximum travel and the best ride quality
- Recommended to run with Dobinsons 6″ lift shocks for maximum travel
(0 reviews)$485.00 Select options This product has multiple variants. The options may be chosen on the product page -
80 Series Land Cruiser (1990-1997)
Dobinsons C97-484VT Dual Rate 4.5″ Front Coils | 80 Series 1990-1997 – Pair
- Suits Land Cruiser 80 Series and Lexus LX450
- Lifts 4.5″ with a heavy load front end (bumper, winch, 2nd battery, etc). Lifts more without added weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Teal
- Sold in Pairs
- VT Series Dual Rate Coils for maximum travel and the best ride quality
- Recommended to run with Dobinsons 6″ lift shocks for maximum travel
(0 reviews)$485.00 Select options This product has multiple variants. The options may be chosen on the product page -
Ineos GrenadierFREE SHIPPING
within 48 US StatesDobinsons MRA 3-Way Adjustable 1.75″ Ineos Grenadier Suspension Kit
- Full Suspension kit that lifts 1.75″ over stock height, Suits Ineos Grenadier 2023-2025+
- Choose from standard load or heavy load coils front and rear
- 3-way adjustable valving – Adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Includes Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Suspension has a Full 2 year limited warranty
- Photos for illustration purposes
- If you’re building out a sick overland rig, don’t forget to think about adding some Fuel Capacity!!
(0 reviews) -
Ineos GrenadierFREE SHIPPING
within 48 US StatesDobinsons IMS Monotube 1.75″ Ineos Grenadier Suspension Kit
- Full Suspension kit that lifts 1.75″ over stock height, Suits Ineos Grenadier 2023-2025+
- Choose from standard load or heavy load coils front and rear
- Shocks are Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Suspension has a Full 2 year limited warranty
- Photos for illustration purposes
- If you’re building out a sick overland rig, don’t forget to think about adding some Fuel Capacity!!
(0 reviews) -
Ineos Grenadier
Dobinsons Steering Damper with Bracket for Ineos Grenadier
- Suits Ineos Grenadier 2023-2025+
- Relocates the steering damper to up above the drag link for proper clearance
- Use in conjunction with SD59-824 steering damper
- Bundle includes the steering damper and necessary bracket for fitment
- A new steering damper helps fight bump steer and makes driving offroad feel smoother from the driver’s seat
- If you don’t know how old your current steering damper is, then it’s time to replace it
- Induction Hardened Rods for strength, no Viscosity Drop due to High Shear Stability
- Cellular Foam Cell Insert
- Teflon Piston Rings
- Excellent Viscosity Temperature Performance
- NOK Triple Lip Oil Seals
- High Quality Fuchs German Oil
- Replaces OE steering damper, bolts into place with included bracket
- 650mm extended, 420mm compressed
(0 reviews) -
Ineos Grenadier
Dobinsons WA51-625K Brake Line Extension Kit – Ineos Grenadier
- Suits Ineos Grenadier 2023-2025+
- Includes necessary parts for front and rear in one kit
- Required to run with Dobinsons IMS or MRA front shocks on the Grenadier
(0 reviews) -
Ineos Grenadier
Dobinsons SE51-619 Front Sway Bar Extension – Ineos Grenadier
- Suits Ineos Grenadier 2023-2025+
- Set of 2 sway bar extensions for the front
- Required to run with Dobinsons IMS or MRA front shocks on the Grenadier
(0 reviews) -
Ineos Grenadier
Dobinsons WA51-626K Front Steering Damper Relocation Bracket – Ineos Grenadier
- Suits Ineos Grenadier 2023-2025+
- Relocates the steering damper to up above the drag link for proper clearance
- Use in conjunction with SD59-824 steering damper
(0 reviews) -
Ineos Grenadier
Dobinsons C51-153V Rear Coil Springs Pair – Ineos Grenadier
- Suits Ineos Grenadier 2023-2025+ Rear, lifts 45mm (1.75″) with a stock weight rear end
- Variable rate springs for great ride quality when fully loaded or not
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- SOLD IN PAIRS
(0 reviews) -
Ineos Grenadier
Dobinsons C51-155V Rear HD Coil Springs Pair – Ineos Grenadier
- Suits Ineos Grenadier 2023-2025+ Rear, lifts 45mm (1.75″) with 300-650LBS added rear end weight, like from a bumper, 2nd fuel tank, roof top tent, etc
- Variable rate springs for great ride quality when fully loaded or not
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- SOLD IN PAIRS
(0 reviews) -
Ineos Grenadier
Dobinsons C51-154 Front HD Coil Springs Pair – Ineos Grenadier
- Suits Ineos Grenadier 2023-2025+ Front, lifts 45mm (1.75″) with 110-220LBS added front end weight, like from a bumper, winch, 2nd battery, etc
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- SOLD IN PAIRS
(0 reviews) -
Ineos Grenadier
Dobinsons C51-152 Front Coil Springs Pair – Ineos Grenadier
- Suits Ineos Grenadier 2023-2025+ Front, lifts 45mm (1.75″) with stock weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- SOLD IN PAIRS
(0 reviews) -
Ineos GrenadierFREE SHIPPING
within 48 US StatesDobinsons MRA51-A270 2.6″ 3-Way Adjustable Shocks Pair – Ineos Grenadier
- Suits Ineos Grenadier 2023-2025+ Front and Rear (this SUV uses the same shocks front and rear)
- 3-way adjustable valving – Adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Photo for illustration purposes
- Note: These shocks should be run with Dobinsons front sway bar extensions and front and rear brake line extension kits to prevent any binding or damage
(0 reviews)
