Dobinsons Spring & Suspension

Showing 361–390 of 1273 resultsSorted by popularity

Bronco (2021-2025+)
Dobinsons Ford Bronco Sway Bar Relocation Bracket Kit
- Suits 2021-2025+ Ford Bronco 2-door and 4-door models (not Bronco Sport)
- Lowers stock front sway bar for better working angle and clearance
- Includes machined aluminum spacers
- Easy bolt-on installation
- Includes new correct grade longer hardware
- Recommended for lift heights of 2″ or more to correct sway bar operating angle
- Installation Instructions
Rated 5.00 out of 5
(2 reviews)
$100.00 Add to cart
100 Series Land Cruiser IFS (1998-2007)
Dobinsons Tubular UCA Pair | Land Cruiser 100 LX470 1998-2007 – No Ball Joints
- For Toyota Land Cruiser 100 Series and Lexus LX470 1998-2007 models
- This purchase does not include any ball joints. Use OEM or aftermarket OE sized upper ball joints
- Not compatible with AHC, it does not have the bracket in place
- Includes both left and right hand side arms, OE style rubber frame bushings installed in the arms, all joint caps, and washers
- Has 3 degrees of caster built in, no adjustability or settings required
- Has more clearance around the ball joint than factory UCA’s for better tire clearance
- Made from HSLA (High Strength Low Alloy) Steel
- 5mm (0.2″) wall thickness
- Powder coated black
- Product Video
- Also available with ball joints installed, here
- Replacement Ball Joints can be ordered here
Rated 5.00 out of 5
(8 reviews)
$675.00 Add to cart
Coil Springs - 4th Gen 4Runner
Dobinsons Front Coil Spring Options for V8 Toyota 4th Gen 4Runner 2003-2009 – Pair
- THIS IS FOR V8 ENGINE 4X4 MODELS ONLY – V6 models use a different set of specs
- Choose what coil suits your vehicle and needs the best
- Sold as a Pair
- All specs are listed for 4×4 models. 2WD models lift about 1″ more due to less weight
- Stock weight = all stock front end | 110 LBS is usually a slim line bumper and winch with synthetic line | 220 LBS is usually a full width steel bumper with a winch and synthetic or steel line | 300+ LBS is usually a full with steel bumper, winch, dual batteries, and skid plates
- C59-238 – Stock front end, low height 1/4-1/2″
- C59-296 – Stock front end, 1.0″ lift
- C59-300 – Stock front end, 1.5″ lift
- C59-302 – Stock Weight – 2.0″ | with 110-150lbs – 1.5″
- C59-314 – Stock Weight – 2.5″ | with 110-220lbs – 2.0″
- C59-350 – With 220-300lbs – 1.5″ | Heavy rate coils
- C59-352 – With 110-220lbs – 2.0″ | Heavy rate coils
- C59-354 – 2.5″ with 110-150lbs | with 220-300lbs – 2.0″ | Heavy rate coils
Rated 5.00 out of 5
(12 reviews)
From $300.00 Select options
Sequoia 3rd Gen (2023-2025+)
Dobinsons Rear Coil Spring 0-3″ Options | Toyota Sequoia 2023+ – Pair
- Suits Toyota Sequoia 2023-2025+, choose the appropriate lift height that also matches any added weight you’ve put on the car
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Coils are Sold in Pairs
- Lifting the rear 2″ requires a new Panhard Rod to re-center the axle
- Lifting 1″ or more, new rear sway bar links are necessary
- 2″ of rear lift also requires longer shocks than stock
Rated 5.00 out of 5
(14 reviews)
From $300.00 Select options
Full Suspension Kits - Tundra 2nd Gen
FREE SHIPPING
within 48 US States
Dobinsons 2.25-3.0″ Pre-Assembled IMS Coilovers for Toyota Tundra 2007-21 4×4
- Suits Toyota Tundra 2007-2021 4×4 Models with 5.7L V8 Gas Engine
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- Looking for a quick and easy way to lift your Tundra? This is your answer
- Select your desired lift height and tell us your weight – we’ll take care of the rest!!
- Dobinsons IMS are height adjustable by an adjustable circlip. Springs must be compressed to change the clip height
- All are assembled at the standard lowest clip height
- The Dobinsons IMS Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
- Fully rebuildable and re-valvable
- 615mm extended, 445mm compressed strut lengths
- SOLD IN PAIRS – READY TO BOLT IN
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- Full 2 year limited warranty, no set rebuild time period
- Photos for illustration purposes – Tundra IMS coilovers use a slightly different coil seat as shown in secondary photos
- Instructions for setting coil seat height
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle. Adding 2.5″ or more lift, new UCA’s should be added for proper articulation and correct wheel alignment
- Link to Matching rear shocks
- Add an optional lean correction spacer for the driver’s side here
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
Rated 5.00 out of 5
(5 reviews)
From $1,580.00 Select options
Full Suspension Kits - FJC Early
FREE SHIPPING
within 48 US States
Dobinsons 1.5-3.5″ Pre-Assembled IMS Toyota FJ Cruiser Coilovers | 2006-2009
- Suits Toyota FJ Cruisers from 2003-2009 4×4 Models
- Looking for a quick and easy way to lift your FJ Cruiser? This is your answer
- Select your desired lift height and load rate – we’ll take care of the rest!!
- Dobinsons IMS are height adjustable by a fully threaded body
- The Dobinsons IMS Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
- Fully rebuildable and re-valvable
- Extended Travel – 567mm extended, 417mm compressed
- SOLD IN PAIRS – READY TO BOLT IN
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Photos for illustration purposes
- Instructions for setting coil seat height
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle. Adding 2.5″ or more lift, new UCA’s should be added for proper articulation and correct wheel alignment
- Link to Matching rear shocks
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
Rated 5.00 out of 5
(4 reviews)
$1,330.00 Select options
80 Series Land Cruiser (1990-1997)
FREE SHIPPING
within 48 US States
Dobinsons 3-Way Adjustable 0-3.5″ MRR Lift Kit | Toyota Land Cruiser 80 Series 1990-97
- Suits Land Cruiser 80 Series and Lexus LX450
- The terms MRA and MRR are used interchangeably. The A stands for Adjustable in the part number or SKU
- Complete MRR suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to match OE fitment specs
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base kit includes front and rear coils and shocks, you can add any other parts you need
- Choose your coils and load carrying ability, anywhere from 0″ up to 3.5″ of Lift
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- External Remote Oil Reservoir with dual speed compression adjustment
- Single Piece Lower Leg, Natural Rubber Bushings Top and Bottom
- Triple Lip Oil Seal for Superior Lifespan
- Direct Bolt-on, Fully Rebuildable Design
- Pre-Charged with Nitrogen, Ready to be Assembled and Installed
- EDP Surface Protection, 3mm Heavy Duty Wall Thickness
- Includes Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Installation Instructions of the MRA Shocks
- Full 2 year limited warranty, no set rebuild time period
Rated 5.00 out of 5
(12 reviews)
From $3,400.00 Select options
Suspension
FREE SHIPPING
within 48 US States
Dobinsons GS59-632 Front Twin Tube Shocks Pair | Land Cruiser 70 Series
- For 1/90 to 5/93 Toyota 70 Series models, LJ70 LJ72 LJ73 LJ77 with Square Headlights
- Also suits 1994+ RJ70, RJ73, KZJ 70/71/73 with Square Headlights
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
Rated 5.00 out of 5
(10 reviews)
$310.00 Add to cart
On Backorder
LJ70, LJ72, LJ73, LJ77 - 90-93 - Square Headlights
Dobinsons C59-244 2.5″ Front Coil Springs | LAND CRUISER 70 Series Multiple Models – Pair
- Dobinsons C59-244 Front Coil Springs for TOYOTA LAND CRUISER LJ70, LJ72, LJ73, LJ77 1/90-5/93 W/SQUARE HEADLIGHTS and 70 Series Prado I, Land Cruiser II, LJ78/79, RJ77, KZJ78 – 87-96
- Lifts 2.5″ with bumper AND winch weight of 110-150lbs.
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold as a Pair
Rated 5.00 out of 5
(7 reviews)
$300.00 Add to cart
80 Series Land Cruiser (1990-1997)
Dobinsons C59-176 Front Coil Springs | Land Cruiser 80 series 3.0″ Lift with 110LBS Load – Pair
- Suits Land Cruiser 80 Series and Lexus LX450
- C59-176 are Front Linear rate coils to give 3.0″ of lift with up to 110LBS of constant accessory weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
Rated 5.00 out of 5
(17 reviews)
$300.00 Add to cart
80 Series Land Cruiser (1990-1997)
Dobinsons C59-313 Rear Coil Springs | Land Cruiser 80 Series – Pair
- Suits Land Cruiser 80 Series and Lexus LX450
- C59-313 4″ lift with 400-750lbs of constant weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 545/555mm free height, 21mm wire, 318LBF/in rate
- Sold in Pairs
Rated 5.00 out of 5
(18 reviews)
$450.00 Add to cart
60 62 Series Land Cruiser (1980-1989)
Dobinsons 60 Series Drawers for Toyota Land Cruiser 1980-1990
- Suits FJ60 and FJ62 Land Cruiser models from 1980-1990
- 1.6mm Zinc Plated Robust Steel Construction
- 12mm Heavy Duty Plywood Panels with Marine Carpet Covering
- Built in Heavy Duty Fridge Slide, 8 x Heavy Duty Stainless Steel Tie Down Points
- Comprehensive Optional universal outer wing trim kit to provide a factory fit
- Aluminum Edging Protection
- Heavy duty lockable latches
- Massive 150KG (330LB) Drawer Capacity on Heavy Duty Roller Bearing System
- Add optional Dobinsons Rear Drawer Table Top for better useability of the drawer
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address
Rated 5.00 out of 5
(3 reviews)
From $1,500.00 Select options
Tundra 2nd Gen (2007-2021)
Dobinsons C59-578 Front 3″ HD Lift Coil Springs | Toyota Tundra 4×4 2007-2021 – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations. Durable Powder Coat Finish
- Extended length new front struts will be required to use these coils, such as GS59-710 Dobinsons Struts
- Lifts 4″ with stock weight front end, and 3″ with a bumper and winch installed
- Sold in Pairs
- 662LBF/in spring rate, 440mm free height
Rated 5.00 out of 5
(18 reviews)
$450.00
Coil Color Clear

Dobinsons C59-578 Front 3" HD Lift Coil Springs | Toyota Tundra 4x4 2007-2021 - Pair quantity
Select options This product has multiple variants. The options may be chosen on the product page
On Backorder
Trooper
Dobinsons Heavy Duty Torsion Bar Pair for Isuzu Trooper (Acura SLX) 1992 to 2002
- For all Isuzu Trooper and Acura SLX models from 1992 to 2002
- 1220 mm total length, 30mm bar thickness
- Increased spring rate to improve handling and lift front end
- Powder coated black for a long lasting finish
- Replaces OE torsion bars without modification
- Torsion bars must be installed with 2/3 suspension down travel and 1/3 up travel to ensure a good ride
Rated 5.00 out of 5
(5 reviews)
$550.00 Add to cart
Dobinsons
FREE SHIPPING
within 48 US States
Dobinsons 12V Zenith 6.0 CFM Air Compressor Kit High Output
- 170L/ minute Air Flow
- Integrated Air Tank
- 2 x 1/8” NPT Auxiliary fittings
- Carry Bag
- 6.5 m Rubber Hose
- Pressure Cut Off Switch
- Safety Release Valve
- Removable Base for Permanent Mounting
- Quick Release Tyre Chuck
Rated 5.00 out of 5
(17 reviews)
$450.00 Add to cart
Tacoma 2nd Gen (2005-2015)
FREE SHIPPING
within 48 US States
Dobinsons 0-3″ Lift Kit Toyota Tacoma 2005-2015 with Blocks or AAL
- Suits 2005-2015 Toyota Tacoma 4×4 Models
- 4×4 Access Cab models come with 1″ front lift from the factory. Lift heights listed are for Dual cab 4×4 models. Subtract 1″ for access cab models
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- You can now select to use Wheeler’s Add-A-Leaf Kit instead of the Quick Ride Kit if you’d prefer
- Select front coils based on front end accessory load and desired lift height
Rated 5.00 out of 5
(10 reviews)
From $960.00 Select options
On Backorder
80 Series Land Cruiser (1990-1997)
Dobinsons C97-144VTB Dual Rate 3.5″ Front Coils | 80 Series 1990-1997 (Black) – Pair
- Suits Land Cruiser 80 Series and Lexus LX450
- Lifts 3.5″ with a heavy load front end (bumper, winch, 2nd battery, etc). Lifts more without added weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Black
- Sold in Pairs
- VT Series Dual Rate Coils for maximum travel and the best ride quality
- Also made in the teal color
Rated 5.00 out of 5
(15 reviews)
$525.00 Add to cart
80 Series Land Cruiser (1990-1997)
Dobinsons C97-147VTB Dual Rate Rear Coils | Black – Pair
- Suits Land Cruiser 80 Series and Lexus LX450 and 2022-2025+ Tundra
- For a 1990-1997 Toyota Land Cruiser 80 Series, they lift 2.5″ with 400LBS+ constant rear end weight
- For a 2022-2025+ Toyota Tundra, they lift 2″ with 800-1000lb rear end load (exceeds GVWR)
- Lifts more with less weight on the vehicle
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Black
- Sold in Pairs
- VT Series Dual Rate Coils for maximum travel and the best ride quality
- Also made in the teal color
Rated 5.00 out of 5
(15 reviews)
$525.00 Add to cart
Bronco (2021-2025+)
Dobinsons Ford Bronco Rear Coils | C19-569V – Pair
- Dobinsons C19-569V Suits Ford Bronco:
  
  4 Door – BL, Wildtrack, First Edition – 150-350Lb Load
- These Coil Springs were made for Dobinsons IMS19-50099 but have been known to fit Bilstein Sasquatch shocks
- Coils Provide Approximately 3″-4″ Lift Above Non Sasquatch Models & 2″-3″ Lift Above Sasquatch Models
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Choose what color you would like
- Made in Australia
- Sold in Pairs
Rated 5.00 out of 5
(11 reviews)
$300.00
Coil Color Clear

Dobinsons Ford Bronco Rear Coils | C19-569V - Pair quantity
Select options This product has multiple variants. The options may be chosen on the product page
4Runner 5th Gen (2010-2024)
Dobinsons 1-3.5″ Pre-Assembled Twin Tube 5th Gen 4Runner Coilovers 2010-2024
- Suits Toyota 4Runner 5th Gen 4×4 Models 2010-2024, with or without KDSS
- If you have a 2WD model, add 1″ to the listed lift heights of the front coils due to the lighter front weight of the vehicle
- Set of twin tube coilovers for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Choose the appropriate coils to match the lift height you want that also suits the added weight you have on the vehicle
- Nitrogen Gas Charged Struts, Superior Design, thicker walls, longer travel
- Direct Bolt-in Replacements, Pre-Assembled and Ready To Go
- 32mm Bore Size, Double Chromed 18mm Rod
- 51mm Body Size
- High Quality Fuch’s German Shock Oil
- NOK Multi-Lip Seals
- Teflon Piston Rings
- Natural Rubber Bushings for the Best NVH Dampening
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Built to order
- Lift heights are subject to variations in vehicle years as well as accessory weights, engine differences, and other variables.
- Suspension Installation Video
- Lift heights are based on the standard 20″ front and 22″ rear, measured from the center of the hub up to the fender edge. Many vehicles come in at different heights from the factory based on trim levels and options
Rated 5.00 out of 5
(6 reviews)
From $980.00 Select options
80 Series Land Cruiser (1990-1997)
FREE SHIPPING
within 48 US States
Dobinsons Front Adjustable Hydro Bump Stop Kit | Toyota 80 Series Land Cruiser 1990-97
- Complete Front hydro bump stop kit to replace the factory coil isolator and internal bump stops
- Suits Toyota Land Cruiser 80 Series and Lexus LX450 1990-1997
- CNC Machined 50mm Billet Aluminum Piston
- EDP Coated 3mm Thick 56mm Steel Body
- Threaded Body For Height Adjustment to adjust when the stop will engage
- Supplied with both Interchangeable Super Quiet Rubber Rod End & Hard Nylon
- 30mm Micro Polished Hard Chrome Shaft
- Slow Rebound Valving To Prevent Bucking
- Removable Dust Cover Boot For Stealth Appearance
- Fully Rebuildable & Tunable
- O-Ring Travel Indicator
- Heavy Duty Extreme-Race style Triple Seal Design
- Nitrogen Gas Charged & Tunable (100 to 300 PSI)
- Pre-charged to 110 PSI
- Extra Short Dead Lengths For Compact Fitment
- Includes full fit kit, 2 hydro bump stops, and spacer blocks for frame-mounted external bump stops
- Kit Includes:
  
  HBS59-012FK Mounting Kit
  
  HBS56-009 or HBS56-006 Hydraulic Bump Stops (choose below)
- HBS56-009 – 46mm (1.8″) stroke | 188mm (7.4″) extended | 142mm (5.6″) compressed | 105mm (4.0″) thread length
- HBS56-006 – 50mm (2.0″) stroke | 238mm (9.4″) extended | 188mm (7.4″) compressed | 125mm (5.0″) thread length
- Use Cases:
  
  HBS59-009 – Use if your shocks Compressed Length is between 382mm (15″) – 390mm (15.35″) – Usually 0-3″ Lift Length Shocks
  
  HBS59-006 – Use if your shocks Compressed Length is between 390mm (15.35″) – 467mm (18.38″) – For 4″ Lift Length Shocks or longer
Rated 5.00 out of 5
(9 reviews)
$900.00 Select options
Dobinsons
Dobinsons Fog Light Kit for Dobinsons Bumpers
- Suits:
  
  BU59-5559 Toyota Tacoma Bull Bar
  
  BU59-5557 Toyota 4Runner Bull Bar
  
  BU59-5558 Toyota Tundra Bull Bar
- Includes Fog Light Bulbs and Wiring Harness
- Rating IP68
- 12V Halogen Bulbs
- 1 Kit needed per vehicle
Rated 5.00 out of 5
(3 reviews)
$195.00 Add to cart
80 Series Land Cruiser (1990-1997)
FREE SHIPPING
within 48 US States
Dobinsons Rear Adjustable Hydro Bump Stop Kit | Toyota 80 Series Land Cruiser 1990-1997
- Complete hydro bump stop kit to replace the factory coil isolator and internal bump stop
- Suits the Rear of Toyota Land Cruiser 80 Series and Lexus LX450 1990-1997
- CNC Machined 50mm Billet Aluminum Piston
- EDP Coated 3mm Thick 56mm Steel Body
- Threaded Body For Height Adjustment to adjust when the stop will engage
- Supplied with both Interchangeable Super Quiet Rubber Rod End & Hard Nylon
- 30mm Micro Polished Hard Chrome Shaft
- Slow Rebound Valving To Prevent Bucking
- Removable Dust Cover Boot For Stealth Appearance
- Fully Rebuildable & Tunable
- O-Ring Travel Indicator
- Heavy Duty Extreme-Race style Triple Seal Design
- Nitrogen Gas Charged & Tunable (100 to 300 PSI)
- Pre-charged to 110 PSI
- Extra Short Dead Lengths For Compact Fitment
- Includes full fit kit, 2 hydro bump stops, and spacer blocks for frame-mounted external bump stops
- Kit Includes:
  
  HBS59-019FK Mounting Kit
  
  HBS56-009 or HBS56-006 Hydraulic Bump Stops (choose below)
- HBS56-009 – 46mm (1.8″) stroke | 188mm (7.4″) extended | 142mm (5.6″) compressed | 105mm (4.0″) thread length
- HBS56-006 – 50mm (2.0″) stroke | 238mm (9.4″) extended | 188mm (7.4″) compressed | 125mm (5.0″) thread length
- Use Cases:
  
  HBS59-009 – Use if your shocks Compressed Length is between 382mm (15″) – 390mm (15.35″) – Usually 0-3″ Lift Length Shocks
  
  HBS59-006 – Use if your shocks Compressed Length is between 390mm (15.35″) – 467mm (18.38″) – For 4″ Lift Length Shocks or longer
- Installation Instructions
Rated 5.00 out of 5
(7 reviews)
$900.00 Select options
100 Series Land Cruiser IFS (1998-2007)
FREE SHIPPING
within 48 US States
Dobinsons MRR 3-Way Adjustable 100 Series Lift Kit | Toyota Land Cruiser IFS V8 Gas 1998-2007
- For 1998-2007 Land Cruiser 100 Series and Lexus LX470
- The terms MRA and MRR are used interchangeably. The A stands for Adjustable in the part number or SKU
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- By default, no rear coils are included, but you can easily select and add them
- You can also remove the torsion bars if you don’t want those
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- 3-way adjustable valving shocks – Adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Universal Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Installation Instructions of the MRR Shocks
- Full 2 year limited warranty, no set rebuild time period
Rated 5.00 out of 5
(8 reviews)
From $3,225.00 Select options
Dobinsons
Dobinsons HJ60-7L-R Rear Medium Load Leaf Springs Pair
- Rear Leaf Springs for the Toyota FJ/BJ70, BJ71, FJ/BJ73, FJ/BJ74 4×4 from 1985 to 1989 and 70 Series – HZJ70, HZJ73, PZJ70, PZJ73 1990-1999
- 50mm rear lift with stock rear end weight
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Sold as a pair, includes 1 left and 1 right spring (different heights to correct lean)
Rated 5.00 out of 5
(2 reviews)
$450.00 Add to cart
Suspension
FREE SHIPPING
within 48 US States
Dobinsons GS59-634 Front Twin Tube Long Travel Shocks Pair | Land Cruiser 70 Series
- For 1/90 to 5/93 Toyota 70 Series models, LJ70 LJ72 LJ73 LJ77 with Square Headlights, and 1994+ RJ70, RJ73, KZJ70, KZJ71, KZJ73 with Square Headlights, and LJ78, LJ79, RJ77, KZJ78
- For 2.5″ of lift only
- Sold as a pair
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
Rated 5.00 out of 5
(8 reviews)
$310.00 Add to cart
LJ70, LJ72, LJ73, LJ77 - 90-93 - Square Headlights
Dobinsons C59-288 1.75″ Front Coil Springs | LAND CRUISER 70 Series Multiple Models – Pair Teal
- Dobinsons C59-288 Front Coil Springs for TOYOTA LAND CRUISER LJ70, LJ72, LJ73, LJ77 1/90-5/93 W/SQUARE HEADLIGHTS and 70 Series Prado I, Land Cruiser II, LJ78/79, RJ77, KZJ78 – 87-96 1.75″ with bumper OR winch weight of 110lbs.
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold as a Pair
Rated 5.00 out of 5
(7 reviews)
$300.00 Add to cart
Sequoia 1st Gen (2001-2007)
FREE SHIPPING
within 48 US States
Dobinsons 0-2.5″ Toyota Sequoia IMS Suspension Kit for 2001 to 2007 4.7L V8
- For Toyota Sequoia 2001 to 2007 models, lift 0-2.5″ depending on options chosen
- Adding preload with the adjustable height IMS struts gives you 2.5″ of lift, or set to the standard coil seat height for 1.75-2″ of lift
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged IMS Shocks, Superior Design, thicker walls, longer travel
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base Kit Includes 2 Front Struts, 2 Rear Shocks, and 4 Coil Springs
- Additional parts can be added from the drop down menus
- It’s recommended that these coilovers to be run with aftermarket UCA’s for coilover clearance and correct travel
Rated 5.00 out of 5
(13 reviews)
From $2,000.00 Select options
200 Series Land Cruiser (2008-2021)
Dobinsons C59-545 3″ HD Land Cruiser 200 Series Rear Coils – Pair
- C59-545 – 4″ lift with stock weight, 3″ lift with 220 LBS constant rear weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 500/470mm free height, 248LBF/IN Spring Rate
- Sold as a Pair – marked side specific for installation
Rated 5.00 out of 5
(7 reviews)
$350.00
Coil Color Clear

Dobinsons C59-545 3" HD Land Cruiser 200 Series Rear Coils - Pair quantity
Select options This product has multiple variants. The options may be chosen on the product page
KL Cherokee (2014-2022) (Trailhawk)
FREE SHIPPING
within 48 US States
Dobinsons Jeep Cherokee Trailhawk Lift Kit for 4X4 KL 2014-2022 inc Sport + Latitude
- Trailhawk (AD2) lifts 1.25″ front and 1.0″ rear. Sport (AD1) models lift 2″ front, and 2″ rear.
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Superior Designed Nitro Gas Shocks, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Includes 2 Front Struts, 2 Rear Shocks, and 4 Coil Springs. Other new OEM components may be required during install.
- GS29-430 Jeep Cherokee KL Front Struts Installation Note
Rated 5.00 out of 5
(11 reviews)
From $1,260.00 Select options