Your cart is currently empty!
Shop
Showing 1861–1890 of 2179 resultsSorted by popularity
-
RecoveryFREE SHIPPING
within 48 US StatesMAXTRAX MKII Lime Green Recovery Boards
- Equipped with our patented Keyhole, MAXTRAX MKII is compatible with our Mounting Pin Set and Rear Wheel Harness.
- Fiber-reinforced, engineering-grade nylon construction won’t break, crack or stress whiten after use—or we’ll replace it for free
- UV stable material won’t fade or degrade in the sun, they’d know—Maxtrax are based in Sunny Queensland
- Proprietary material resists wheel spin without risking tire damage for non-professional users
- Lifetime warranty against manufacturing faults and workmanship
- Six built-in handles and a shovel on each end make MAXTRAX perfect for use in sand, snow, or mud
- 45L x 13W x 3.5H, 7.5LB (3.4KG) per board, 15LB (6.8KG) per pair
- Made in Australia, from Australian materials
- Includes a LIFETIME warranty against faults in materials and workmanship, along with a set of MAXTRAX Telltale leashes to pull your MAXTRAX out of the muck!
- SOLD IN PAIRS
- Made in multiple different colors, subject to availability
(2 reviews) -
RecoveryFREE SHIPPING
within 48 US StatesMAXTRAX MKII Desert Tan Recovery Boards
- Equipped with our patented Keyhole, MAXTRAX MKII is compatible with our Mounting Pin Set and Rear Wheel Harness.
- Fiber-reinforced, engineering-grade nylon construction won’t break, crack or stress whiten after use—or we’ll replace it for free
- UV stable material won’t fade or degrade in the sun, they’d know—Maxtrax are based in Sunny Queensland
- Proprietary material resists wheel spin without risking tire damage for non-professional users
- Lifetime warranty against manufacturing faults and workmanship
- Six built-in handles and a shovel on each end make MAXTRAX perfect for use in sand, snow, or mud
- 45L x 13W x 3.5H, 7.5LB (3.4KG) per board, 15LB (6.8KG) per pair
- Made in Australia, from Australian materials
- Includes a LIFETIME warranty against faults in materials and workmanship, along with a set of MAXTRAX Telltale leashes to pull your MAXTRAX out of the muck!
- SOLD IN PAIRS
- Made in multiple different colors, subject to availability
(5 reviews) -
RecoveryFREE SHIPPING
within 48 US StatesMAXTRAX MKII Titanium Grey Recovery Boards
- Equipped with our patented Keyhole, MAXTRAX MKII is compatible with our Mounting Pin Set and Rear Wheel Harness.
- Fiber-reinforced, engineering-grade nylon construction won’t break, crack or stress whiten after use—or we’ll replace it for free
- UV stable material won’t fade or degrade in the sun, they’d know—Maxtrax are based in Sunny Queensland
- Proprietary material resists wheel spin without risking tire damage for non-professional users
- Lifetime warranty against manufacturing faults and workmanship
- Six built-in handles and a shovel on each end make MAXTRAX perfect for use in sand, snow, or mud
- 45L x 13W x 3.5H, 7.5LB (3.4KG) per board, 15LB (6.8KG) per pair
- Made in Australia, from Australian materials
- Includes a LIFETIME warranty against faults in materials and workmanship, along with a set of MAXTRAX Telltale leashes to pull your MAXTRAX out of the muck!
- SOLD IN PAIRS
- Made in multiple different colors, subject to availability
(2 reviews) -
RecoveryFREE SHIPPING
within 48 US StatesMAXTRAX MKII Blaze Yellow Recovery Boards
- Equipped with our patented Keyhole, MAXTRAX MKII is compatible with our Mounting Pin Set and Rear Wheel Harness.
- Fiber-reinforced, engineering-grade nylon construction won’t break, crack or stress whiten after use—or we’ll replace it for free
- UV stable material won’t fade or degrade in the sun, they’d know—Maxtrax are based in Sunny Queensland
- Proprietary material resists wheel spin without risking tire damage for non-professional users
- Lifetime warranty against manufacturing faults and workmanship
- Six built-in handles and a shovel on each end make MAXTRAX perfect for use in sand, snow, or mud
- 45L x 13W x 3.5H, 7.5LB (3.4KG) per board, 15LB (6.8KG) per pair
- Made in Australia, from Australian materials
- Includes a LIFETIME warranty against faults in materials and workmanship, along with a set of MAXTRAX Telltale leashes to pull your MAXTRAX out of the muck!
- SOLD IN PAIRS
- Made in multiple different colors, subject to availability
(5 reviews) -
RecoveryFREE SHIPPING
within 48 US StatesMAXTRAX MKII Black Recovery Boards
- Equipped with our patented Keyhole, MAXTRAX MKII is compatible with our Mounting Pin Set and Rear Wheel Harness.
- Fiber-reinforced, engineering-grade nylon construction won’t break, crack or stress whiten after use—or we’ll replace it for free
- UV stable material won’t fade or degrade in the sun, they’d know—Maxtrax are based in Sunny Queensland
- Proprietary material resists wheel spin without risking tire damage for non-professional users
- Lifetime warranty against manufacturing faults and workmanship
- Six built-in handles and a shovel on each end make MAXTRAX perfect for use in sand, snow, or mud
- 45L x 13W x 3.5H, 7.5LB (3.4KG) per board, 15LB (6.8KG) per pair
- Made in Australia, from Australian materials
- Includes a LIFETIME warranty against faults in materials and workmanship, along with a set of MAXTRAX Telltale leashes to pull your MAXTRAX out of the muck!
- SOLD IN PAIRS
- Made in multiple different colors, subject to availability
(3 reviews) -
RecoveryFREE SHIPPING
within 48 US StatesMAXTRAX MKII Signature Orange Recovery Boards
- Equipped with our patented Keyhole, MAXTRAX MKII is compatible with our Mounting Pin Set and Rear Wheel Harness.
- Fiber-reinforced, engineering-grade nylon construction won’t break, crack or stress whiten after use—or we’ll replace it for free
- UV stable material won’t fade or degrade in the sun, they’d know—Maxtrax are based in Sunny Queensland
- Proprietary material resists wheel spin without risking tire damage for non-professional users
- Lifetime warranty against manufacturing faults and workmanship
- Six built-in handles and a shovel on each end make MAXTRAX perfect for use in sand, snow, or mud
- 45L x 13W x 3.5H, 7.5LB (3.4KG) per board, 15LB (6.8KG) per pair
- Made in Australia, from Australian materials
- Includes a LIFETIME warranty against faults in materials and workmanship, along with a set of MAXTRAX Telltale leashes to pull your MAXTRAX out of the muck!
- SOLD IN PAIRS
- Made in multiple different colors, subject to availability
(5 reviews) -
ExcludedFREE SHIPPING
within 48 US StatesOME Upper Control Arms Pair | Tacoma Hilux Fortuner
- Suits Toyota Tacoma 4×4 2005-2023, Toyota Hilux 2005-2023, Toyota Fortuner 2005-2023
- Forged Ball Joint Housing
- Forged Eyelets
- Heavy Duty greasable Ball Joints
- OME Ball joint protective cap
- GIIRO bushings, free pivoting, grease free and maintenance free
- Increased camber and caster for 2in lift
- Mount provision for OE ABS wires
- ARB’s Intergrit powder coat finish
- Boxed in pairs with foam inserts
- Fitting instructions included
- OME Branded outer sleeve
- Tested and passed to meet VSB14 requirements
- 3 Year Manufacturers Warranty
- Made in Vietnam
(13 reviews) -
Control Arms - 200 SeriesFREE SHIPPING
within 48 US StatesOME Upper Control Arms Pair – 200 Series Land Cruiser 2008-2021
- Suits Land Cruiser 200 Series and Lexus LX570 2008-2021
- Forged Ball Joint Housing
- Forged Eyelets
- Heavy Duty greasable Ball Joints
- OME Ball joint protective cap
- GIIRO bushings, free pivoting, grease free and maintenance free
- Increased camber and caster for 2in lift
- Mount provision for OE ABS wires
- ARB’s Intergrit powder coat finish
- Boxed in pairs with foam inserts
- Fitting instructions included
- OME Branded outer sleeve
- Tested and passed to meet VSB14 requirements
- 3 Year Manufacturers Warranty
- Made in Vietnam
(13 reviews) -
Montero Pajero NM NP NS NT 2000+FREE SHIPPING
within 48 US StatesDobinsons 3-Way Adjustable MRR Lift Kit | Mitsubishi Montero Pajero NM NP NS NT 2000-2019
- Suits 2000-2019 Mitsubishi Montero and Pajero SWB and LWB, gas or diesel engines Models NM, NP, NS, NT, NW
- This does not fit the Montero Sport or Challenger models
- Make your selections below based on if you have a 3-Door SWB Model or 5-door LWB Model
- The terms MRA and MRR are used interchangeably. The A stands for Adjustable in the part number or SKU
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Shock Design
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Includes 2 Front Struts, 2 Rear Shocks, and 4 Coil Springs
- Note: Coil seat should be set at 244mm from the center of the lower bushing to the notch in the coil seat, same as original coil seat height. The coils do the lifting. Fine tuning up or down can be done to tune the height or level the vehicle left to right, if required
- Full 2 year limited warranty, no set rebuild time period
(7 reviews) -
Montero Pajero NM NP NS NT 2000+FREE SHIPPING
within 48 US StatesDobinsons MRR 3-Way Adjustable Rear Shocks Pair | Mitsubishi Montero Pajero 2000+
- 3-way adjustable valving – adjust high and low speed compression and rebound
- The terms MRA and MRR are used interchangeably. The A stands for Adjustable in the part number or SKU
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Universal Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Photos for illustration purposes
(13 reviews) -
Montero Pajero NM NP NS NT 2000+FREE SHIPPING
within 48 US StatesDobinsons MRR 3-Way Adjustable Front Struts Pair | Mitsubishi Montero Pajero 2000+
- 3-way adjustable valving – adjust high and low speed compression and rebound
- The terms MRA and MRR are used interchangeably. The A stands for Adjustable in the part number or SKU
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Universal Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Does not include coil springs or top mounts – sold separately
- Instructions on setting coil seat height
- Photos for illustration purposes
(17 reviews) -
DobinsonsFREE SHIPPING
within 48 US StatesDobinsons MRA59-A710 3-Way Adjustable Front Struts Pair | Toyota Sequoia 2008-2022
- Pair of Struts only, no coils included and not preassembled
- If you’re looking for an assembled set of coilovers, those are here: Assembled Coilovers for 2008-2022 Sequoia
- The terms MRA and MRR are used interchangeably. The A stands for Adjustable in the part number or SKU
- Height adjustable with a fully threaded body
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Requires lower mount clearancing to fit the larger lower leg of the new coilover (see attached photo)
- See attached photo for correct hose routing, can vary depending on UCA’s used
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Reservoir Brackets and Hardware and Sticker Pack
- SOLD IN PAIRS
- Full 2 year limited warranty, no set rebuild time period
- Does not include coil springs – sold separately
- Front coilover assembly instructions
- New UCA’s are required for proper coilover and hose clearance, see all options
- Aftermarket wheels with +18 Offset or less REQUIRED to avoid reservoir + hose rubbing at full lock
- Link to recommended 16″ coils with a 3″ inner diameter and 650LB Spring Rate
- Link to add assembly labor charge, so that when you buy these struts and the coils, you can have them preassembled before shipping
(15 reviews) -
Shocks + Struts - Sequoia 3rd GenFREE SHIPPING
within 48 US StatesDobinsons 3.0-4.0″ MRR 3-Way Adjustable Toyota Sequoia Coilovers | 2023-2025+
- Suits Toyota Sequoia 2023-2025+ Models
- TRD Pro Models yield 1″ less lift than listed here, as they are already lifted taller than base models
- Sold as a Pair, ready to bolt in
- The terms MRA and MRR are used interchangeably. The A stands for Adjustable in the part number or SKU
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- Looking for a quick and easy way to lift your Sequoia? This is your answer
- Select your desired lift height and tell us your weight – we’ll take care of the rest!!
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- SOLD IN PAIRS
- Full 2 year limited warranty, no set rebuild time period
- Must mount the banjo fitting and hose inwards on MRA struts
- Coil seat for MRA59-A446 will be set at 175mm (6.87″) from the strut bushing eye
- Photos for illustration purposes
- Instructions for setting and adjusting coil seat height
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle. Adding 2.5″ or more lift, new UCA’s should be added for proper articulation and correct wheel alignment
- If doing a 4″ lift in the front, a diff-drop kit or longer TRD CV-axles are REQUIRED, failure to complete these requirements could cause OE CV-axle failure
- TRD axle shafts: PT362-3432B and PT362-3431B
- Front Installation Instructions
- Link to Matching rear shocks
- A Diff Drop Kit should be run with 4″ of lift
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
(7 reviews) -
Shocks + Struts - Sequoia 3rd GenFREE SHIPPING
within 48 US StatesDobinsons 3.0-4.0″ Assembled IMS Coilovers | Toyota Sequoia 2023-2025+
- Suits Toyota Sequoia 2023-2025+ Models
- TRD Pro Models yield 1″ less lift than listed here, as they are already lifted taller than base models
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- Looking for a quick and easy way to lift your Sequoia? This is your answer
- Select your desired lift height and tell us your weight – we’ll take care of the rest!!
- Dobinsons IMS are height adjustable by a threaded body with adjustable collar
- The Dobinsons IMS Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
- Fully rebuildable and re-valvable
- SOLD IN PAIRS – READY TO BOLT IN
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- Full 2 year limited warranty, no set rebuild time period
- Photos for illustration purposes – Sequoia IMS coilovers use a slightly different top mount
- Instructions for setting and adjusting coil seat height
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle. Adding 2.5″ or more lift, new UCA’s should be added for proper articulation and correct wheel alignment
- If doing a 4″ lift in the front, a diff-drop kit or longer TRD CV-axles are REQUIRED, failure to complete these requirements could cause OE CV-axle failure
- TRD axle shafts: PT362-3432B and PT362-3431B
- Link to Matching rear shocks
- A Diff Drop Kit should be run with 4″ of lift
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
- Note: If you’re looking for less lift height, you can buy these IMS Struts only and use them with your OEM coils and add preload to add lift height
(3 reviews) -
Air CompressorsFREE SHIPPING
within 48 US StatesARB CKMTA24 24V High Performance Twin Air Compressor
- Motors are water sealed, 100% ball bearing equipped (i.e. no bushings), and feature a unique linear brush pre-load system for extra long life, low heat and quiet operation throughout the life of the unit.
- Compact twin motor, dual cylinder design makes it the highest flowing compressor in its class (voltage vs. size). Highest air flow rate of any 24 Volt air compressor of its size on the market at 174LPM [6.16CFM].
- Full wiring loom included for simplified installation and easy plug-in connectivity to Air Locker control solenoids. (Note: Air Locker Manifold Kit #171503 required to mount solenoids).
- Motors are internally thermal protected against extreme temperature damage. Over-pressure safety valve equipped. Equipped with dual heavy duty Maxi-Fuses for professional in-line circuit protection and true circuit redundancy in case of a fault.
- Compressor pistons are equipped with a heavy duty European made cylindrical roller bearing. Hard-anodized cylinder bores and PTFE (Teflon) impregnated carbon fibre piston seals for reduced friction and maximum trouble free life.
- 24V, Draws 25.2 Amps, 6.16 CFM, 150 PSI max, 100% Duty Cycle
- 10.9 x 7.5 x 4.1 inches actual dimensions, 19.4 LBS with all items included
(7 reviews) -
100 Series Land Cruiser IFS (1998-2007)
OME 2851 Front Coil Springs | Land Cruiser 80 and 105 Series – Pair
- OME Part Number 2851
- Bar Size : 16 mm
- Free Height : 475/485 mm
- Number of Turns : 8.18
- Coil Weight (each): 5.3 Kg | 11.7 lbs
- Spring Rate : 220 lbs
- Sold in Pairs
(22 reviews) -
100 Series Land Cruiser IFS (1998-2007)
OME 2862 Rear Coil Springs | Land Cruiser 80 and 100 Series – Pair
- OME Part Number 2862
- Bar Size : 17 mm
- Free Height : 460/470 mm
- Number of Turns : 9.0
- Coil Weight (each): 7.8 Kg | 17.2 lbs
- Spring Rate : 170-260 lbs
- Variable Rate Springs
- Sold in Pairs
(21 reviews) -
100 Series Land Cruiser IFS (1998-2007)
OME 2860 Rear Coil Springs | Land Cruiser 80 and 100 Series – Pair
- OME Part Number 2860
- Bar Size : 17 mm
- Free Height : 480/490mm
- Number of Turns : 6.88
- Coil Weight (each): 6 Kg | 13.2 lbs
- Spring Rate : 220 lbs
- Sold in Pairs
(26 reviews) -
Full Suspension Kits - XterraFREE SHIPPING
within 48 US StatesDobinsons 1.5″ Lift MRR 3-Way Adjustable Coilovers | Nissan Xterra 2005+
- Remote Resi Coilovers Suit Nissan Xterra 4×4 Models (2005-2015) – lifts 1.5″
- Looking for a quick and easy way to lift your Xterra? This is your answer
- The terms MRA and MRR are used interchangeably. The A stands for Adjustable in the part number or SKU
- Dobinsons MRR are height adjustable by a fully threaded body
- The Dobinsons MRA Coilovers will come pre-assembled with new struts, coils and top mounts
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Reservoir Bracket and Hardware, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Length specs – 395mm extended, 266mm compressed
- Photos for illustration purposes
- FITTING INSTRUCTIONS
- Instructions for setting coil seat height
- Link to the matching rear shocks
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
(2 reviews) -
Differential | DrivetrainFREE SHIPPING
within 48 US StatesARB RD151 Front Tundra Air Locker 5.7L V8 8″
- For Use with Toyota Tundra 5.7L V8 front 2007 to 2021 with 8″ 34 spline axles
- At the flick of a dash-mounted switch, compressed air is delivered to the seal housing assembly via a nylon air line.
- Instantaneously go from an open differential to a fully locked differential at the flick of a switch for maximum traction
- Requires an Air Compressor for operation, Sold Separately
- Why do they use air? Air is used on every semi truck on the road to reliably operate their brakes through solenoids, and ARB uses the same technology. When installed correctly, it’s ultra-reliable!!
- The ARB Air Locker is a pneumatic locking differential that uses air to facilitate the locking of both axles. This action converts your differential from a conventional open to a full spool type axle supplying 100% power to both wheels to keep you going through the worst terrain.
- This Air Locker kit includes the full differential, instruction booklet, airline, fittings, switch and cover, and necessary seals. When combined with an Air Compressor and the original differential, you’ll have everything you need as far as parts go
- It’s recommended that a qualified differential mechanic do the installation for proper setup
- Covered by a full manufacturer’s 5 YEAR WARRANTY
(11 reviews) -
TeraflexFREE SHIPPING
within 48 US StatesTeraflex JL JT Front Track Bar Axle Bracket Kit (2.5–3.5” Lift)
- Suits Jeep Wrangler JL and Gladiator JT
- The TeraFlex JL/JT: Front Track Bar Axle Bracket Kit corrects vehicle roll center
- Corrects steering geometry eliminating bump steer and other front-end issues
- Restores factory handling
- Reduces body roll on lifted JL Wrangler/Unlimited and Gladiator models
- Bolt-on bracket mounts to the front axle
- Drilling is required
- Installation Instructions
(9 reviews) -
TeraflexFREE SHIPPING
within 48 US StatesTeraflex JL: Rear Track Bar Axle Bracket Kit (2.5–4.5” Lift)
- The TeraFlex JL: Rear Track Bar Axle Bracket Kit corrects vehicle roll center
- Restores factory handling
- Reduces body roll on lifted JL Wrangler/Unlimited models
- Multiple mounting locations allows neutral lateral alignment of the rear axle on JL models with 2.5–4.5” lifts
- Bolt-on bracket mounts to the rear axle
- Drilling is required
- Installation Instructions
(9 reviews) -
Bump Stops + SpacersFREE SHIPPING
within 48 US StatesTeraflex JL: Progressive Bump Stop Kit – Front & Rear (0-4.5″ Lift)
- JL specific tuned for high-speed performance
- Foam Progressive Bump Stops simply pop-in to the existing factory locations
- Replaces factory foam bump stops
- Performance-tuned closed-cell nitrogen charged microcellular polyurethane technology
- Absorbs large impact energy progressively during compression to prevent bent axle tubes
- Prevents damage to suspension components, shock absorbers, and fenders
- Quiet movement and function (no pad-slap clunk)
- Maintains progressive nature during all conditions
- Will not fade or dissipate under extended heavy use
- Unaffected by temperature extremes – retains flexibility in thermal or subzero temps
- Resistant to all types of environmental conditions (mud, salt, sand, dust, etc.)
- Subzero temperature flexibility reduces fatigue
- Compatible w/ all suspension systems that retain factory axle spring mounting locations
- Maintenance-free, all composite construction
- Simple bolt-on installation
- Patented technology
- Limited lifetime warranty
- Installation Instructions
(9 reviews) -
Rear BumpersFREE SHIPPING
within 48 US StatesTeraflex JL Alpha HD Hinged Spare Tire Carrier & Mount Kit
- Suits Jeep Wrangler JL 2018+ 2-door and 4-door
- Max Tire: 40”
- Wheel Pattern: 5×5”
- Innovative and unique design w/ easy adjustability
- Maintains single-handed entry to the rear cargo area
- Works w/ OEM and most aftermarket bumpers
- Simple installation using common hand tools
- No drilling required — uses factory mounting locations
- Dedicated CAD-designed tooling and CAE design
- FEA validation, ASTM, and SAE testing procedures
- 1,000-hour extreme salt spray testing
- OEM Quality UV resistant powder coat finish w/ 3,000-hour accelerated weather testing
- Alpha HD Hinged Spare Tire Carrier Kit:
- Eliminates tailgate stress and rattles
- Factory form fitting geometry and finish for an OEM appearance
- Threaded mounting holes for mounting accessories such as Hi-Lift and CB antennae brackets
- Hinged Carrier constructed from strong and lightweight A356.2 aluminum
- Heavy-duty forged steel brackets and mid-carbon hardened steel 5/8” hinge pins
- 14,000-cycle severe duty slam testing Alpha HD Adjustable Spare Tire Mount Kit:
- Easy fore/aft and height adjustments
- Relocates 3rd brake light from behind tailgate to behind spare tire
- Includes new quick-release 3rd Brake Light Mount
- Includes new hard-anodized billet aluminum Rearview Camera Mount
- Spare Tire Mount is formed and welded from CNC laser cut steel for superior strength
- Adjuster made from strong and lightweight 6061-T6 extruded aluminum
(9 reviews) -
All Pro OffroadFREE SHIPPING
within 48 US States2005-2023 Tacoma T-Case and Exhaust Skid Plate – Black Steel
- Suits 2005-2023 Toyota Tacoma 4×4 Models
- Easy, bolt-on installation
- All necessary hardware included
- Black Powder Coated
- 3/16-inch steel construction
- Protects t-case and exhaust
- Easy, bolt-on installation
- All hardware included
- Bare steel and black powder coat versions available (bare steel versions require painting before installation)
- Installation Instructions
- Made in USA
(7 reviews) -
All Pro OffroadFREE SHIPPING
within 48 US States2005-2023 Tacoma T-Case and Exhaust Skid Plate – Bare Steel
- Suits 2005-2023 Toyota Tacoma 4×4 Models
- Easy, bolt-on installation
- All necessary hardware included
- Bare steel versions require painting before installation
- 3/16-inch steel construction
- Protects t-case and exhaust
- Easy, bolt-on installation
- All hardware included
- Bare steel and black powder coat versions available (bare steel versions require painting before installation)
- Installation Instructions
- Made in USA
(7 reviews) -
All Pro OffroadFREE SHIPPING
within 48 US States2005-2023 Tacoma Transmission Skid Plate – Steel Black Powder Coated
- Suits 2005-2023 Toyota Tacoma 4×4 Models
- Does not fit 2WD Pre-Runner or 2.7L Automatic Single Cab Tacoma
- 3/16-inch steel – Black Powder Coated Steel
- Optimal balance between strength and weight
- Save yourself from costly underbody repairs with this easy to install Tacoma skid plate
- Easy, bolt-on installation using all factory hardware
- Made in USA
- Requires All-Pro IFS Skid Plate
(7 reviews) -
All Pro OffroadFREE SHIPPING
within 48 US States2005-2023 Tacoma Engine Skid Plate – Aluminum Black Powder Coated
- Suits 2005-2023 Toyota Tacoma 4×4 Models
- Covers from the front bumper down to the first cross member
- 1/4-inch aluminum construction – Black Powder Coated Steel
- Optimal balance between strength and weight
- Save yourself from costly underbody repairs with this easy to install Tacoma skid plate
- Easy, bolt-on installation using all factory hardware
- Compatible with stock bumpers
- Available in 4 variants – Steel or Aluminum, Bare or Powder Coated
- Made in the USA
- Installation Instructions
(7 reviews) -
All Pro OffroadFREE SHIPPING
within 48 US States2005-2023 Tacoma Engine Skid Plate – Steel Black Powder Coated
- Suits 2005-2023 Toyota Tacoma 4×4 Models
- Covers from the front bumper down to the first cross member
- 3/16-inch steel – Black Powder Coated Steel
- Optimal balance between strength and weight
- Save yourself from costly underbody repairs with this easy to install Tacoma skid plate
- Easy, bolt-on installation using all factory hardware
- Compatible with stock bumpers
- Available in 4 variants – Steel or Aluminum, Bare or Powder Coated
- Made in the USA
- Installation Instructions
(7 reviews) -
All Pro OffroadFREE SHIPPING
within 48 US States2005-2023 Tacoma Engine Skid Plate – Bare Steel
- Suits 2005-2023 Toyota Tacoma 4×4 Models
- Covers from the front bumper down to the first cross member
- 3/16-inch steel – Bare Steel – needs to be painted before installation
- Optimal balance between strength and weight
- Save yourself from costly underbody repairs with this easy to install Tacoma skid plate
- Easy, bolt-on installation using all factory hardware
- Compatible with stock bumpers
- Available in 4 variants – Steel or Aluminum, Bare or Powder Coated
- Made in the USA
- Installation Instructions
(7 reviews)
