Your cart is currently empty!
Armor
Showing 151–175 of 175 resultsSorted by popularity
-
All Pro OffroadFREE SHIPPING
within 48 US States2005-2023 Tacoma Engine Skid Plate – Steel Black Powder Coated
- Suits 2005-2023 Toyota Tacoma 4×4 Models
- Covers from the front bumper down to the first cross member
- 3/16-inch steel – Black Powder Coated Steel
- Optimal balance between strength and weight
- Save yourself from costly underbody repairs with this easy to install Tacoma skid plate
- Easy, bolt-on installation using all factory hardware
- Compatible with stock bumpers
- Available in 4 variants – Steel or Aluminum, Bare or Powder Coated
- Made in the USA
- Installation Instructions
(7 reviews) -
All Pro OffroadFREE SHIPPING
within 48 US States2005-2023 Tacoma Engine Skid Plate – Bare Steel
- Suits 2005-2023 Toyota Tacoma 4×4 Models
- Covers from the front bumper down to the first cross member
- 3/16-inch steel – Bare Steel – needs to be painted before installation
- Optimal balance between strength and weight
- Save yourself from costly underbody repairs with this easy to install Tacoma skid plate
- Easy, bolt-on installation using all factory hardware
- Compatible with stock bumpers
- Available in 4 variants – Steel or Aluminum, Bare or Powder Coated
- Made in the USA
- Installation Instructions
(7 reviews) -
Skid Plates + Sliders - 5th Gen 4RunnerFREE SHIPPING
within 48 US States2010-2024 4Runner Engine Skid Plate – Black Powder Coated Steel
- Suits 2010-2024 Toyota 4Runner 5th Gen
- Covers from the front bumper down to the first cross member
- 3/16-inch steel – Black Powder Coat
- Optimal balance between strength and weight
- Save yourself from costly underbody repairs with this easy to install 5th Gen 4Runner skid plate
- Skidplate not currently compatible with a diff drop kit – you would have to space it down
- Easy, bolt-on installation using all factory hardware
- Compatible with stock bumpers
- Compatible with All-Pro 2010+ 4Runner Front Bumpers
- Not tested with KDSS Vehicles
- Available in 4 variants – Steel or Aluminum, Bare or Powder Coated
- Made in the USA
- Installation Instructions
(7 reviews) -
Skid Plates + Sliders - 5th Gen 4RunnerFREE SHIPPING
within 48 US States2010-2024 4Runner Engine Skid Plate – Bare Steel
- Suits 2010-2024 Toyota 4Runner 5th Gen
- Covers from the front bumper down to the first cross member
- 3/16-inch steel – Bare Steel – needs to be painted before installation
- Optimal balance between strength and weight
- Save yourself from costly underbody repairs with this easy to install 5th Gen 4Runner skid plate
- Skid plate not currently compatible with a diff drop kit – you would have to space it down
- Easy, bolt-on installation using all factory hardware
- Compatible with stock bumpers
- Compatible with All-Pro 2010+ 4Runner Front Bumpers
- Not tested with KDSS Vehicles
- Available in 4 variants – Steel or Aluminum, Bare or Powder Coated
- Made in the USA
- Installation Instructions
(7 reviews) -
Skid Plates + Sliders - 5th Gen 4RunnerFREE SHIPPING
within 48 US States2010-2024 4Runner Engine Skid Plate – Aluminum Black Powder Coated
- Suits 2010-2024 Toyota 4Runner 5th Gen
- Covers from the front bumper down to the first cross member
- 1/4-inch thick 5052 Aluminum – Black Powder Coated
- Optimal balance between strength and weight
- At only 22 lbs, it’s half the weight of similar steel undercarriage protection
- Save yourself from costly underbody repairs with this easy to install 5th Gen 4Runner skid plate
- Skid plate not currently compatible with a diff drop kit – you would have to space it down
- Easy, bolt-on installation using all factory hardware
- Compatible with stock bumpers
- Compatible with All-Pro 2010+ 4Runner Front Bumpers
- Not tested with KDSS Vehicles
- Available in 4 variants – Steel or Aluminum, Bare or Powder Coated
- Made in the USA
- Installation Instructions
(7 reviews) -
Skid Plates + Sliders - 5th Gen 4RunnerFREE SHIPPING
within 48 US States2010-2024 4Runner Engine Skid Plate – Bare Aluminum
- Suits 2010-2024 Toyota 4Runner 5th Gen
- Covers from the front bumper down to the first cross member
- 1/4-inch thick 5052 Aluminum – Bare
- Optimal balance between strength and weight
- At only 22 lbs, it’s half the weight of similar steel undercarriage protection
- Save yourself from costly underbody repairs with this easy to install 5th Gen 4Runner skid plate
- Skid plate not currently compatible with a diff drop kit – you would have to space it down
- Easy, bolt-on installation using all factory hardware
- Compatible with stock bumpers
- Compatible with All-Pro 2010+ 4Runner Front Bumpers
- Not tested with KDSS Vehicles
- Available in 4 variants – Steel or Aluminum, Bare or Powder Coated
- Made in the USA
- Installation Instructions
(7 reviews) -
Front BumpersFREE SHIPPING
within 48 US States2014-2024 4Runner LoPro Bumper – Bare Steel
- Suits 2014-2024 5th Gen Toyota 4Runners, but not Limited Models
- BUILT 100% IN THE USA!!
- Bare Steel – you have to powder coat or paint it after you receive it
- Photos show after it has been powder coated
- 3/16″ steel faceplate and 1/4″ steel winch plate
- 4 1/2″ x 10″ winch mounting pattern
- Compatible with most 8-12k winches with remote mount solenoid box
- Zinc plated hardware
- Designed to fit 30″ single-row light bars
- Compatible with Toyota Safety Sense (TSS) and Multi-Terrain Monitoring system (MTM)
- Cutting the plastic bumper is required to install this product
- Weighs 74lbs
- NOTE: Not compatible with Limited Edition 4Runners
- Download Instructions
- **We are not able to ship this outside the 48 US States
- Also available powder coated before it ships
(7 reviews) -
Front BumpersFREE SHIPPING
within 48 US States2016-23 Tacoma Aluminum Low Profile Front Bumper w/ Center Hoop
- Suits 2016-2023 Toyota Tacoma
- Ships in bare aluminum. You powder coat or paint it after you receive it
- This design allows you to keep the look of the OEM bumper while adding new high-quality features
- This bumper provides an increased approach angle in the front
- The body of this bumper is made from Aluminum with a steel support structure to ensure the highest durability
- We include two 3/4″ thick recovery points that are directly tied to the steel mounting plate
- It is designed to fit 30″ single-row light bars with a mounting width of 31.75″ or less
- This bumper is also compatible with most 8-12k winches with a remote mount solenoid box
- Made in the USA
- Installation Instructions
- Also available without a center hoop
(7 reviews) -
Front BumpersFREE SHIPPING
within 48 US States2016-23 Tacoma Aluminum Low Profile Front Bumper – No Hoop
- Suits 2016-2023 Toyota Tacoma
- Ships in bare aluminum. You powder coat or paint it after you receive it
- This design allows you to keep the look of the OEM bumper while adding new high-quality features
- This bumper provides an increased approach angle in the front
- The body of this bumper is made from Aluminum with a steel support structure to ensure the highest durability
- We include two 3/4″ thick recovery points that are directly tied to the steel mounting plate
- It is designed to fit 30″ single-row light bars with a mounting width of 31.75″ or less
- This bumper is also compatible with most 8-12k winches with a remote mount solenoid box
- Made in the USA
- Installation Instructions
- Also available with a center hoop attached
(7 reviews) -
Bumpers - Tacoma 3rd GenFREE SHIPPING
within 48 US States2016-23 Tacoma Steel Low Profile Front Bumper – No Hoop
- Suits 2016-2023 Toyota Tacoma
- Ships in bare steel. You powder coat or paint it after you receive it
- This design allows you to keep the look of the OEM bumper while adding new high-quality features
- This bumper provides an increased approach angle in the front
- Made from a CNC laser cut, brake-formed, 3/16″ steel faceplate and the 1/4″ steel winch plate
- We include two 3/4″ thick recovery points that are directly tied to the steel mounting plate
- It is designed to fit 30″ single-row light bars with a mounting width of 31.75″ or less
- This bumper is also compatible with most 8-12k winches with a remote mount solenoid box
- Made in the USA
- Installation Instructions
- Also available with a center hoop attached
(7 reviews) -
Skid Plates
RCI Catalytic Guards | 2005-2023 Tacoma
- REQUIRES RCI TRANSMISSION SKID PLATE FOR INSTALLATION
- Fits: 2005-2023 Toyota Tacoma
- *Fits 4×4 4.0L/3.5L Access Cab and Double Cab trucks only
- Protects exposed catalytic converters from on and off road debris
- Excellent addition to the RCI Transmission skid to aid in preventing catalytic converter thefts
- Vented design for adequate airflow and heat dissipation
- Smooth, flat surface that easily slides over obstacles
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing RCI Transmission skid, drilling may be required until manufacturing begins on pre cut out holes on Transmission skid plate
- Designed around the most current RCI transmission skid plate with 2in double bent side flange
- Requires RCI Transmission Skid Plate for installation
(5 reviews) -
Skid Plates, Sliders + Racks - Tacoma 3rd GenFREE SHIPPING
within 48 US StatesApex 2005-2023 Toyota Tacoma Rock Sliders
- Suits 2005-2023 Toyota Tacoma Access Cab Long Bed, Dual Cab Short Bed and Dual Cab Long Bed
- SIGNATURE “KICK-OUT” DESIGN
- All Pro Offroad Apex Tacoma Rock Sliders have been trail tested on some of the most grueling trails around, from the Rubicon to the Hammers
- Rock Sliders mount with the included grade 8 hardware including countersunk bolts that are flush with the bottom surface, since exposed bolt heads can be easily mangled by rocks
- All-Pro Rock Sliders are made from heavy duty 1.75” x .120” Steel Tube and 2″ square tube
- The shape of our Tacoma Rock Sliders is very critical and determines how much body protection it will provide as well as how the truck slides along the obstacles without getting hung up
- The outer tubes of the Tacoma Rock Sliders are 1.75″ diameter, and angle upward to provide maximum ground clearance and door protection
- Also included is a one-piece CNC laser cut .125″ steel fill plate with dimple die holes and the APEX logo on the kick-out portion.
- All-Pro Apex Rock Tacoma Rock Sliders not only look great but can be used as a lift point, easily holding the full weight of the vehicle.
- Made from hefty 1.75” x .120 wall DOM steel tubing with 2” square legs that are fully gusseted
- MADE IN THE USA
- INSTALLATION INSTRUCTIONS
(3 reviews) -
Skid Plates, Sliders + Racks - Tacoma 3rd GenFREE SHIPPING
within 48 US StatesAll Pro 2005-2023 Toyota Tacoma Rock Sliders
- Suits 2005-2023 Toyota Tacoma Access Cab Long Bed, Dual Cab Short Bed and Dual Cab Long Bed
- SIGNATURE “KICK-OUT” DESIGN
- All Pro Offroad Tacoma Rock Sliders have been trail tested on some of the most grueling trails around, from the Rubicon to the Hammers
- Rock Sliders mount with the included grade 8 hardware including countersunk bolts that are flush with the bottom surface, since exposed bolt heads can be easily mangled by rocks
- All-Pro Rock Sliders are made from heavy duty 1.75” x .120” Steel Tube and 2″ square tube
- The shape of our Tacoma Rock Sliders is very critical and determines how much body protection it will provide as well as how the truck slides along the obstacles without getting hung up
- The outer tubes of the Tacoma Rock Sliders are 1.75″ diameter, and angle upward to provide maximum ground clearance and door protection
- All-Pro Rock Tacoma Rock Sliders not only look great but can be used as a lift point, easily holding the full weight of the vehicle.
- Made from hefty 1.75” x .120 wall DOM steel tubing with 2” square legs that are fully gusseted
- MADE IN THE USA
- INSTALLATION INSTRUCTIONS
(3 reviews) -
Skid Plates + Sliders - 5th Gen 4RunnerFREE SHIPPING
within 48 US States2010-2024 Toyota 4Runner Rock Sliders
- Suits 2010-2024 Toyota 4Runner without XREAS Suspension
- All Pro Offroad 4Runner Rock Sliders have been trail tested on some of the most grueling trails around, from the Rubicon to the Hammers
- They are built from heavy-duty .120″ wall tubing
- The shape of our 4Runner Rock Sliders is very critical and determines how much body protection it will provide as well as how the truck slides along the obstacles without getting hung up
- The outer tubes of the 4Runner Rock Sliders are 1.75″ diameter, and angle upward to provide maximum ground clearance and door protection
- All-Pro Rock 4Runner Rock Sliders not only look great but can be used as a lift point, easily holding the full weight of the vehicle.
- Made from hefty 1.75” x .120 wall DOM steel tubing with 1.75” round legs that are fully gusseted
- MADE IN THE USA
- INSTALLATION INSTRUCTIONS
(3 reviews) -
Late FJ Cruiser (2010-2016)
RCI 2010+ FJ Cruiser Engine Skid Plate
- Fits Toyota FJ Cruiser 2010-2017 models
- Includes front skid plate ONLY
- Protects front two cross-members, low hanging front differential, oil pan, transmission, second and third cross-members, exhaust cross pipe, and transfer-case
- Excellent addition or replacement of weak, lightweight OEM skid plates
- Simple installation and removal of all subsections for maintenance
- Built in oil drain holes allow easy access and ability to change oil without removal of plate
- Engine skid plates come standard with center mounting posts for substantially increased strength
- Engine skid plate includes differential drop cage for maximum security and ground clearance, PLUS this feature allows the use of differential drop kits without having to space the skid plate down
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Smooth, flat surface that easily slides over obstacles
- Black powder coat finish is standard on steel skid plates for a rust resistant, durable and high quality finish, optional on aluminum
- Installs in minutes
- Grade 8 hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Made in the USA
(3 reviews) -
4Runner 4th Gen (2003-2009)
RCI 4th and 5th Gen 4Runner + FJ Cruiser V6 Transmission Skid Plate 2003-2024
- Fits Toyota 4Runner V6 Models 2003-2009 and 2010-2024, and FJ Cruiser (all years)
- Protects transmission, second and third cross-members, and exhaust
- Excellent addition or replacement of weak, lightweight OEM skid plates (which do not provide any coverage over transmission)
- Service openings for maintenance without removal
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Built in drainage holes, which also help prevent suction of skid plates in mud and snow
- Smooth, flat surface that easily slides over obstacles
- Black powder coat available for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Made in the USA
(3 reviews) -
Bronco (2021-2025+)
RCI Rear Bronco Diff Skid Plate | 2021+ Ford Bronco
- Suits 2021+ Ford Bronco
- Protects the low hanging rear differential
- Clamps directly to axle housing for an easy no drill install
- Hugs differential tightly, within 1/4″ for minimal loss in ground clearance.
- Black powder coated for rust resistant, durable and high quality finish
- Design incorporates drain holes for water and dirt to escape, as well as allow full access to the differential drain plug
- Installs in minutes
- All hardware and installation instructions provided
- MADE IN THE USA
(5 reviews) -
Bronco (2021-2025+)
RCI Full Skid Plate Package | 2021+ Ford Bronco 2/4 Door
- Suits 2021+ Ford Bronco 2 door and 4 door models – Does not suit Bronco Sport models
- Includes engine (two piece), transmission and transfer-case skid plates.
- Protects expensive EPAS power steering unit, front differential, front cross-member, engine, engine bay, intercooler, sway bar disconnect (if applicable),, transmission, exhaust, oil pan, transfer-case, and more!
- Compatible with 4×4 and Raptor models
- Simple installation and removal of all subsections for maintenance
- Extremely high clearance hugs the truck very tight and does not sacrifice ground clearance for protection
- Smooth, flat surface that easily slides over obstacles
- Steel version-black epoxy powder coated for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- *May Not be Compatible with all 4+” Lift Kits (drop bracket kits)
- Made in the USA
(9 reviews) -
76 Series - FZJ76, HZJ76, VDJ76 - 2007+ (Station Wagon)
Dobinsons Toyota 76 Series Rear Bumper with Tire and Jerry Can Carrier
- Made for Long Wheel Base (LWB) 76 Series Land Cruiser Wagons, FZJ76, HZJ76, VDJ76 2007 to 2022
- Comes standard as Black Powder Coat
- Stainless Steel Latch and Hardware
- Complete Kit with Everything Included
- All Lighting is 12V LED, requires splicing into original wiring harness (not plug and play)
- Works with Factory Tow Hitch in OE position
- Adjustable offset tire carrier head, suitable up to a 35″ tire
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address
(13 reviews) -
79 Series - FZJ79, HZJ79, HDJ79, VDJ79, GRJ79 (Pickup)
Dobinsons Toyota 79 Series Rear Bumper with Tire and Jerry Can Carrier
- Made for Long Wheel Base (LWB) 79 Series Land Cruiser Pickup Trucks, FZJ79, HZJ79, HDJ79, VDJ79,
GRJ79 2007-2022 - Comes standard as Black Powder Coat
- Stainless Steel Latch and Hardware
- Complete Kit with Everything Included
- Includes Left side single or dual Jerry Can carrier and right side Tire Carrier
- All Lighting is 12V LED, requires splicing into original wiring harness (not plug and play)
- Works with Factory Tow Hitch in OE position
- Adjustable offset tire carrier head, suitable up to a 35″ tire
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address
(14 reviews) -
Tacoma 3rd Gen (2016-2023)
Dobinsons Front Winch Bumper for Toyota Tacoma 2016-2023
- Suits Toyota Tacoma 4×4 from 2016-2023
- Winch compatible, up to 12,000 LB winches
- Driving Light Mounts
- Optional Fog Lights – Here for more details
- Optional Front Driving Lights (as shown in photos) – Here for more details
- Requires cutting of the original plastic front bumper cover
- Heavy Duty Black Powder Coat Finish
- 3mm Thick Main Body, 4mm + 5mm Thick Bracket, 1.6mm Bash Plates, 51mm top tubes
- Includes LED Turn Signals and all Required Hardware for Installation
- Separate Winch Cradle System, making installation faster. (does not include winch)
- Supplied Black, but can be painted by your paint shop
- Suits 10,000 and 12,000 LB Low Mount Winches – requires offset fairlead
- Installation Instructions
- Truck freight shipping is usually to the nearest freight terminal, or commercial address with forklift
- Ships to the nearest freight terminal on a pallet for you to pick up, unless you add home delivery. We will be in touch with that delivery address
(15 reviews) -
60 62 Series Land Cruiser (1980-1989)
ARB 3410100 Toyota 60 Series Land Cruiser Front Winch Bumper
- Suits all Toyota Landcruiser 60 and 62 Series models from 1980 to 1989
- Enhances the look of the 60 Series or 62 Series as well as providing awesome protection against animal strikes or rear end accidents
- Full width single piece steel welded bumper, includes all mounting hardware
- Compatible with a range of low mount winches without an integrated solenoid pack
- Includes driving light mounts as well as CB antenna mounts, welded in place
- Durable black powder coat finish
- Includes recessed turn signals in the bumper that you can wire into your OEM harness for additional visibility
- Not as heavy as it looks, just over 100lbs out of the packaging
- Ships by truck freight – we will be in touch with you about shipping details
- Fitment of Warn XD9000 & M8000 winch requires special spacer kit – ARB part no. 3500050.
- Best suited to a 10k or 12k low-mount winch, due to overall truck weight and size
- We offer a large variety of Winches as well
(2 reviews) -
Bronco (2021-2025+)FREE SHIPPING
within 48 US StatesARB 5480100 Skid Plate Kit | Ford Bronco 4-Door 2021+
- Ford Bronco Skid Plate Set, Suits Ford Bronco 2021+ 4-Door Models
- 3mm pressed and folded sheet steel adds more strength than a standard folded sheet.
- Laser cut sheet steel.
- Zinc plated and powder coated with a silver textured finish.
- Recessed mounting bolts are protected and easy to remove for vehicle servicing.
- The Under Vehicle Protection will fit with or without an ARB front bumper. Fitment has not been confirmed with other aftermarket bumper designs
- Comprises 4 panels: Front Panel (Protects power steering, engine sump, sway bar), Diff Panel (Protects front diff mounts, engine sump), Transmission (Protects transmission and transmission controls) and Transfer Case (Protects transfer case)
- See more details below as well as product video
(6 reviews) -
Armor
Dobinsons Front Deluxe Winch Bumper | Toyota Land Cruiser 200 Series 10/2015-2021
- Suits 10/2015-2021 Toyota Land Cruiser 200 Series and Lexus LX570
- Airbag and winch compatible, Driving Light Mounts, Heavy Duty Black Powder Coat Finish
- 3mm Thick Main Body, 4mm + 5mm Thick Bracket, 1.6mm Bash Plates, 51-76mm top tubes depending on vehicle
- Includes Turn Signals and all Required Hardware for Installation
- Separate Winch Cradle System, making installation faster
- Supplied Black, but can be painted by your paint shop. Suits 12000 LB Low Mount Winches
- We offer a large variety of Winches as well
- Ships to the nearest freight terminal on a pallet for you to pick up, unless you add home delivery. We will be in touch with that delivery address
(6 reviews) -
Armor
Dobinsons 200 Series Winch Bumper | Land Cruiser 200 Series 2012 to mid 2016
- Airbag and winch compatible
- Driving Light Mounts
- Heavy Duty Black Powder Coat Finish
- 3mm Thick Main Body, 4mm + 5mm Thick Bracketry, 1.6mm Bash Plates, 51-76mm top tubes depending on vehicle
- Includes Turn Signals and all Required Hardware for Installation
- Separate Winch Cradle System, making installation faster
- Supplied Black, but can be painted by your local paint shop
- Suits 10000 – 12000 LB Low Mount Winches
- We offer a large variety of Winches as well
- Ships to the nearest freight terminal for pickup, unless you add the home delivery fee below. We will be in touch to let you know the terminal location
(6 reviews)
