Your cart is currently empty!
ARB
Showing 61–69 of 69 results
-
ARB
ARB710LB Orange Snatch Strap Recovery 30′ x 3 1/4″ (24000 LB)
- A snatch strap is a Kinetic strap that stores energy to magnify the pulling power during a vehicle recovery
- Min. breaking strength: 12,500kg / 24000lb Specifically designed to stretch under load for maximum performance
- An ARB snatch strap is a very effective method of extracting a bogged or immobilized 4wd when a second vehicle is present
- Length: 9m / 30 feet. Width: 80mm / 3 1/4″Â
- Material: 100 percent nylon, Elasticity: Stretch (genuine) 20 percent. The kinetic energy generated by the elasticity aids with the recovery itself, while at the same time reducing the likelihood of vehicle damage.
- Reinforced Eyes. For vehicle recovery, a snatch strap is more suitable than a tow strap.
- All ARB snatch straps are woven and fabricated to ARB specifications, and tested by a NATA approved laboratory
- Part no. ARB710LB
- Min. breaking strength: 12,500kg/24000lb
- Length: 9m / 30 feet
- Width: 80mm / 3 1/4″
- Elasticity: Stretch (genuine) 20%
- Material: 100% nylon
- Reinforced eyes: yes
- Eye & seam protector sleeves: yes
$96.00 Add to cart -
ARB
ARB705LB Orange Snatch Strap Recovery 30′ x 2 3/8″ (17500 LB)
- A snatch strap is a Kinetic strap that stores energy to magnify the pulling power during a vehicle recovery
- Min. breaking strength: 8,000kg / 17,600 lb Specifically designed to stretch under load for maximum performance
- An ARB snatch strap is a very effective method of extracting a bogged or immobilized 4wd when a second vehicle is present
- Length: 9m / 30 feet. Width: 60mm / 2 1/8″ feet
- Material: 100 percent nylon, Elasticity: Stretch (genuine) 20 percent. The kinetic energy generated by the elasticity aids with the recovery itself, while at the same time reducing the likelihood of vehicle damage.
- Reinforced Eyes. For vehicle recovery, a snatch strap is more suitable than a tow strap.
- All ARB snatch straps are woven and fabricated to ARB specifications, and tested by a NATA approved laboratory
- Part no. ARB705LB
- Min. breaking strength: 8,000kg/17,600lb
- Length: 9m / 30 feet
- Width:Â 60mm / 2 1/8″
- Elasticity: Stretch (genuine) 20%
- Material: 100% nylon
- Reinforced eyes: yes
- Eye & seam protector sleeves: yes
$70.00 Add to cart -
ARB
ARB510 ARB Air Systems E-Z Tire Deflator with Digital Gauge and Pouch
- Easily lower your tire pressure with a clear digital readout, while you prep your vehicle to hit the trails
- Lowering your tire pressure is a MUST when going offroad for increase comfort, better traction, better tire pattern, and higher performance from your vehicle
- Easy-to-read blue backlit display screen, Large LCD digital readout
- Multiple measurements available: 0-14 bar, 0-200 psi, 0-1400 kpa, 0-14 KgF
- Auto switch off, Auto switch on
- 250mm braided line
- High-quality brass components and crimps
- Rubber bump guard to protect against drops
- Screw-on chuck suits all Schrader valves
- Accuracy to +/- 1psi at 15-75psi
- Includes updated larger canvas pouch for storage
$83.00 Add to cart -
Air Compressors
ARB CKSA12 High Performance Small 12V Air Compressor
- Designed specifically to run one or two Air Lockers
- Constructed of lightweight, high-strength, engineering-grade materials, including military and aerospace-grade components
- Relocatable, splash-resistant air filter with washable high-flow sintered bronze filter cartridge for cleaner, cooler air supply
- Fully sealed components for moisture and dust protection
- Over-pressure safety valve-equipped
- Pressure switch-controlled air manifold system specially designed for ARB Air Lockers
- Hard-anodized cylinder bore and PTFE-impregnated carbon fiber piston seal for reduced friction and maximum life
- Anti-vibration, sound-deadening, anodized mount dissipates motor heat and allows compressor to be repositioned 180 degrees
- Ball bearing-equipped motor (no bushings) with unique, linear brush, pre-load system for long life, low heat, and quiet operation
- Compressor piston equipped with a German-made, high shock-rated, cylindrical roller bearing
- Motor is internally thermal-protected against extreme temperature damage
- Comprehensive-photo illustrated installation guide
- 12V DC, Draws 5.5 Amps, 0.98 CFM, 100 PSI max
$241.00 Add to cart -
Snorkel
Safari Snorkel SS56HF – Toyota Tundra 2014-2021
- Created to Fit 2014-2021 Toyota Tundra Models
- Safari V-Spec Snorkel
- Relocates Your Engine’s Air Intake Point to a Higher Location
- Crosslinked Polyethylene Construction
- Built to Perform in Extreme Weather Conditions
- Comes With Stainless Steel and Plated Hardware
- Bolt-On Installation; Drilling Is Required
- Supported by a 2-Year Warranty
- Fully Designed and Manufactured in Australia
- Designed and manufactured in Australia
- Requires cutting and drilling of the fender and A-pillar. Full instructions and template provided.
$674.00 Add to cart -
Snorkel
Safari Snorkel SS172HP – Toyota Tacoma 3rd Gen 2016-2023
- Suits Toyota Tacoma 2016-2023 Models – 3rd Gen Tacoma
- Raises air intake to prevent water ingestion, while also allowing vehicles to utilize clean air when driving in dusty conditions
- Vehicle specific design and factory airbox adaption fitment
- Manufactured using durable, UV stable cross linked polyethylene material
- Supplied as a comprehensive kit, including the necessary fasteners and mounting brackets
- Unique air ram design acts as a highly efficient water separator to remove rain water form incoming air stream
- Designed and manufactured in Australia
- 10% higher CFM for this application over other brand snorkels, due to large body design
- Requires cutting and drilling of the fender and A-pillar. Full instructions and template provided
$627.00 Add to cart