Your cart is currently empty!
Dobinsons
Showing 361–390 of 1263 resultsSorted by popularity
-
Full Suspension Kits - Tundra 2nd GenFREE SHIPPING
within 48 US StatesDobinsons 2.25-3.0″ Pre-Assembled IMS Coilovers for Toyota Tundra 2007-21 4×4
- Suits Toyota Tundra 2007-2021 4×4 Models with 5.7L V8 Gas Engine
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- Looking for a quick and easy way to lift your Tundra? This is your answer
- Select your desired lift height and tell us your weight – we’ll take care of the rest!!
- Dobinsons IMS are height adjustable by an adjustable circlip. Springs must be compressed to change the clip height
- All are assembled at the standard lowest clip height
- The Dobinsons IMS Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
- Fully rebuildable and re-valvable
- 615mm extended, 445mm compressed strut lengths
- SOLD IN PAIRS – READY TO BOLT IN
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- Full 2 year limited warranty, no set rebuild time period
- Photos for illustration purposes – Tundra IMS coilovers use a slightly different coil seat as shown in secondary photos
- Instructions for setting coil seat height
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle. Adding 2.5″ or more lift, new UCA’s should be added for proper articulation and correct wheel alignment
- Link to Matching rear shocks
- Add an optional lean correction spacer for the driver’s side here
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
(5 reviews) -
Full Suspension Kits - FJC EarlyFREE SHIPPING
within 48 US StatesDobinsons 1.5-3.5″ Pre-Assembled IMS Toyota FJ Cruiser Coilovers | 2006-2009
- Suits Toyota FJ Cruisers from 2003-2009 4×4 Models
- Looking for a quick and easy way to lift your FJ Cruiser? This is your answer
- Select your desired lift height and load rate – we’ll take care of the rest!!
- Dobinsons IMS are height adjustable by a fully threaded body
- The Dobinsons IMS Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
- Fully rebuildable and re-valvable
- Extended Travel – 567mm extended, 417mm compressed
- SOLD IN PAIRS – READY TO BOLT IN
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Photos for illustration purposes
- Instructions for setting coil seat height
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle. Adding 2.5″ or more lift, new UCA’s should be added for proper articulation and correct wheel alignment
- Link to Matching rear shocks
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
(4 reviews) -
80 Series Land Cruiser (1990-1997)FREE SHIPPING
within 48 US StatesDobinsons 3-Way Adjustable 0-3.5″ MRR Lift Kit | Toyota Land Cruiser 80 Series 1990-97
- Suits Land Cruiser 80 Series and Lexus LX450
- The terms MRA and MRR are used interchangeably. The A stands for Adjustable in the part number or SKU
- Complete MRR suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to match OE fitment specs
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base kit includes front and rear coils and shocks, you can add any other parts you need
- Choose your coils and load carrying ability, anywhere from 0″ up to 3.5″ of Lift
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- External Remote Oil Reservoir with dual speed compression adjustment
- Single Piece Lower Leg, Natural Rubber Bushings Top and Bottom
- Triple Lip Oil Seal for Superior Lifespan
- Direct Bolt-on, Fully Rebuildable Design
- Pre-Charged with Nitrogen, Ready to be Assembled and Installed
- EDP Surface Protection, 3mm Heavy Duty Wall Thickness
- Includes Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Installation Instructions of the MRA Shocks
- Full 2 year limited warranty, no set rebuild time period
(12 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons GS59-632 Front Twin Tube Shocks Pair | Land Cruiser 70 Series
- For 1/90 to 5/93 Toyota 70 Series models, LJ70 LJ72 LJ73 LJ77 with Square Headlights
- Also suits 1994+ RJ70, RJ73, KZJ 70/71/73 with Square Headlights
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
(10 reviews) -
LJ70, LJ72, LJ73, LJ77 - 90-93 - Square Headlights
Dobinsons C59-244 2.5″ Front Coil Springs | LAND CRUISER 70 Series Multiple Models – Pair
- Dobinsons C59-244 Front Coil Springs for TOYOTA LAND CRUISER LJ70, LJ72, LJ73, LJ77 1/90-5/93 W/SQUARE HEADLIGHTS and 70 Series Prado I, Land Cruiser II, LJ78/79, RJ77, KZJ78 – 87-96
- Lifts 2.5″ with bumper AND winch weight of 110-150lbs.
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold as a Pair
(7 reviews) -
DobinsonsFREE SHIPPING
within 48 US StatesDobinsons Toyota Tundra 2.25-3.0″ IMS Suspension Kit for 2007-2021
- Complete IMS suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Photos show full kit with most options purchased – choose what you’d like
- Coils are specifically suited to provide comfort and lift
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Choose your desired suspension parts to build the kit best suited to your weight
- IMS struts – Clip height adjustable front struts, massive 2.6″ size body front and rear with 60mm pisons, IFP (Internal Floating Piston) technology
- 4 Clip height settings. Lowest height is stock/OE height. Each clip height adds approximately 1/2″ of lift. Use clip heights to fine tune lift height or offset for vehicle lean
- FRONT ASSEMBLY INSTRUCTIONS
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
(7 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons C59-313 Rear Coil Springs | Land Cruiser 80 Series – Pair
- Suits Land Cruiser 80 Series and Lexus LX450
- C59-313 4″ lift with 400-750lbs of constant weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 545/555mm free height, 21mm wire, 318LBF/in rate
- Sold in Pairs
(18 reviews) -
Pickup (1988-1995)
Dobinsons Toyota Pickup/Hilux 1986-1995 Rear Polyurethane Leaf Spring Bush Kit
- For any lift height, or no lift. These are OE replacement bushings.
- Use with Dobinsons Leaf Springs or any other brand that can accept OE-size bushings
- Pressing of OE bushings may be necessary during removal and installation
- Replaces OE bushings in all 6 positions of rear leaf springs
- Greasable bolts are sold in pairs, sold separately
(3 reviews) -
Trooper
Dobinsons Heavy Duty Torsion Bar Pair for Isuzu Trooper (Acura SLX) 1992 to 2002
- For all Isuzu Trooper and Acura SLX models from 1992 to 2002
- 1220 mm total length, 30mm bar thickness
- Increased spring rate to improve handling and lift front end
- Powder coated black for a long lasting finish
- Replaces OE torsion bars without modification
- Torsion bars must be installed with 2/3 suspension down travel and 1/3 up travel to ensure a good ride
(5 reviews) -
DobinsonsFREE SHIPPING
within 48 US StatesDobinsons 12V Zenith 6.0 CFM Air Compressor Kit High Output
- 170L/ minute Air Flow
- Integrated Air Tank
- 2 x 1/8” NPT Auxiliary fittings
- Carry Bag
- 6.5 m Rubber Hose
- Pressure Cut Off Switch
- Safety Release Valve
- Removable Base for Permanent Mounting
- Quick Release Tyre Chuck
(17 reviews) -
Tacoma 2nd Gen (2005-2015)
Dobinsons 0-3″ Lift Kit Toyota Tacoma 2005-2015 with Blocks or AAL
- Suits 2005-2015 Toyota Tacoma 4×4 Models
- 4×4 Access Cab models come with 1″ front lift from the factory. Lift heights listed are for Dual cab 4×4 models. Subtract 1″ for access cab models
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- You can now select to use Wheeler’s Add-A-Leaf Kit instead of the Quick Ride Kit if you’d prefer
- Select front coils based on front end accessory load and desired lift height
(10 reviews) -
GX470 (2002-2009)FREE SHIPPING
within 48 US StatesDobinsons GX470 Snorkel Kit for Lexus GX470 2003-2009
- Lexus GX470 Snorkel Kit – Suits 2003-2009 Models
- Rotationally molded using precision CNC shaped aluminum dies
- Increases air intake height to allow safer water crossings and reduce dust intake
- Increased air intake height rams cooler, cleaner air into the engine increasing engine performance
- Increased air intake height rams cooler, cleaner air into the engine increasing engine performance
- Manufactured from high quality UV resistant LLDPE
- Snorkel Kits include template and all mounting hardware
(8 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons C97-147VTB Dual Rate Rear Coils | Black – Pair
- Suits Land Cruiser 80 Series and Lexus LX450 and 2022-2025+ Tundra
- For a 1990-1997 Toyota Land Cruiser 80 Series, they lift 2.5″ with 400LBS+ constant rear end weight
- For a 2022-2025+ Toyota Tundra, they lift 2″ with 800-1000lb rear end load (exceeds GVWR)
- Lifts more with less weight on the vehicle
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Black
- Sold in Pairs
- VT Series Dual Rate Coils for maximum travel and the best ride quality
- Also made in the teal color
(15 reviews) -
Bronco (2021-2025+)
Dobinsons Ford Bronco Rear Coils | C19-569V – Pair
- Dobinsons C19-569V Suits Ford Bronco:
- 4 Door – BL, Wildtrack, First Edition – 150-350Lb Load
- These Coil Springs were made for Dobinsons IMS19-50099 but have been known to fit Bilstein Sasquatch shocks
- Coils Provide Approximately 3″-4″ Lift Above Non Sasquatch Models & 2″-3″ Lift Above Sasquatch Models
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Choose what color you would like
- Made in Australia
- Sold in Pairs
(11 reviews)$300.00 Select options This product has multiple variants. The options may be chosen on the product page -
80 Series Land Cruiser (1990-1997)FREE SHIPPING
within 48 US StatesDobinsons Front Adjustable Hydro Bump Stop Kit | Toyota 80 Series Land Cruiser 1990-97
- Complete Front hydro bump stop kit to replace the factory coil isolator and internal bump stops
- Suits Toyota Land Cruiser 80 Series and Lexus LX450 1990-1997
- CNC Machined 50mm Billet Aluminum Piston
- EDP Coated 3mm Thick 56mm Steel Body
- Threaded Body For Height Adjustment to adjust when the stop will engage
- Supplied with both Interchangeable Super Quiet Rubber Rod End & Hard Nylon
- 30mm Micro Polished Hard Chrome Shaft
- Slow Rebound Valving To Prevent Bucking
- Removable Dust Cover Boot For Stealth Appearance
- Fully Rebuildable & Tunable
- O-Ring Travel Indicator
- Heavy Duty Extreme-Race style Triple Seal Design
- Nitrogen Gas Charged & Tunable (100 to 300 PSI)
- Pre-charged to 110 PSI
- Extra Short Dead Lengths For Compact Fitment
- Includes full fit kit, 2 hydro bump stops, and spacer blocks for frame-mounted external bump stops
- Kit Includes:
- HBS59-012FK Mounting Kit
- HBS56-009 or HBS56-006 Hydraulic Bump Stops (choose below)
- HBS56-009 – 46mm (1.8″) stroke | 188mm (7.4″) extended | 142mm (5.6″) compressed | 105mm (4.0″) thread length
- HBS56-006 – 50mm (2.0″) stroke | 238mm (9.4″) extended | 188mm (7.4″) compressed | 125mm (5.0″) thread length
- Use Cases:
- HBS59-009 – Use if your shocks Compressed Length is between 382mm (15″) – 390mm (15.35″) – Usually 0-3″ Lift Length Shocks
- HBS59-006 – Use if your shocks Compressed Length is between 390mm (15.35″) – 467mm (18.38″) – For 4″ Lift Length Shocks or longer
(9 reviews) -
Dobinsons
Dobinsons Fog Light Kit for Dobinsons Bumpers
- Suits:
- BU59-5559 Toyota Tacoma Bull Bar
- BU59-5557 Toyota 4Runner Bull Bar
- BU59-5558 Toyota Tundra Bull Bar
- Includes Fog Light Bulbs and Wiring Harness
- Rating IP68
- 12V Halogen Bulbs
- 1 Kit needed per vehicle
(3 reviews) - Suits:
-
80 Series Land Cruiser (1990-1997)FREE SHIPPING
within 48 US StatesDobinsons Rear Adjustable Hydro Bump Stop Kit | Toyota 80 Series Land Cruiser 1990-1997
- Complete hydro bump stop kit to replace the factory coil isolator and internal bump stop
- Suits the Rear of Toyota Land Cruiser 80 Series and Lexus LX450 1990-1997
- CNC Machined 50mm Billet Aluminum Piston
- EDP Coated 3mm Thick 56mm Steel Body
- Threaded Body For Height Adjustment to adjust when the stop will engage
- Supplied with both Interchangeable Super Quiet Rubber Rod End & Hard Nylon
- 30mm Micro Polished Hard Chrome Shaft
- Slow Rebound Valving To Prevent Bucking
- Removable Dust Cover Boot For Stealth Appearance
- Fully Rebuildable & Tunable
- O-Ring Travel Indicator
- Heavy Duty Extreme-Race style Triple Seal Design
- Nitrogen Gas Charged & Tunable (100 to 300 PSI)
- Pre-charged to 110 PSI
- Extra Short Dead Lengths For Compact Fitment
- Includes full fit kit, 2 hydro bump stops, and spacer blocks for frame-mounted external bump stops
- Kit Includes:
- HBS59-019FK Mounting Kit
- HBS56-009 or HBS56-006 Hydraulic Bump Stops (choose below)
- HBS56-009 – 46mm (1.8″) stroke | 188mm (7.4″) extended | 142mm (5.6″) compressed | 105mm (4.0″) thread length
- HBS56-006 – 50mm (2.0″) stroke | 238mm (9.4″) extended | 188mm (7.4″) compressed | 125mm (5.0″) thread length
- Use Cases:
- HBS59-009 – Use if your shocks Compressed Length is between 382mm (15″) – 390mm (15.35″) – Usually 0-3″ Lift Length Shocks
- HBS59-006 – Use if your shocks Compressed Length is between 390mm (15.35″) – 467mm (18.38″) – For 4″ Lift Length Shocks or longer
- Installation Instructions
(7 reviews) -
100 Series Land Cruiser IFS (1998-2007)FREE SHIPPING
within 48 US StatesDobinsons MRR 3-Way Adjustable 100 Series Lift Kit | Toyota Land Cruiser IFS V8 Gas 1998-2007
- For 1998-2007 Land Cruiser 100 Series and Lexus LX470
-
The terms MRA and MRR are used interchangeably. The A stands for Adjustable in the part number or SKU
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- By default, no rear coils are included, but you can easily select and add them
- You can also remove the torsion bars if you don’t want those
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- 3-way adjustable valving shocks – Adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Universal Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Installation Instructions of the MRR Shocks
- Full 2 year limited warranty, no set rebuild time period
(8 reviews) -
Dobinsons
Dobinsons HJ60-7L-R Rear Medium Load Leaf Springs Pair
- Rear Leaf Springs for the Toyota FJ/BJ70, BJ71, FJ/BJ73, FJ/BJ74 4×4 from 1985 to 1989 and 70 Series – HZJ70, HZJ73, PZJ70, PZJ73 1990-1999
- 50mm rear lift with stock rear end weight
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Sold as a pair, includes 1 left and 1 right spring (different heights to correct lean)
(2 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons GS59-634 Front Twin Tube Long Travel Shocks Pair | Land Cruiser 70 Series
- For 1/90 to 5/93 Toyota 70 Series models, LJ70 LJ72 LJ73 LJ77 with Square Headlights, and 1994+ RJ70, RJ73, KZJ70, KZJ71, KZJ73 with Square Headlights, and LJ78, LJ79, RJ77, KZJ78
- For 2.5″ of lift only
- Sold as a pair
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
(8 reviews) -
Sequoia 1st Gen (2001-2007)FREE SHIPPING
within 48 US StatesDobinsons 0-2.5″ Toyota Sequoia IMS Suspension Kit for 2001 to 2007 4.7L V8
- For Toyota Sequoia 2001 to 2007 models, lift 0-2.5″ depending on options chosen
- Adding preload with the adjustable height IMS struts gives you 2.5″ of lift, or set to the standard coil seat height for 1.75-2″ of lift
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged IMS Shocks, Superior Design, thicker walls, longer travel
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base Kit Includes 2 Front Struts, 2 Rear Shocks, and 4 Coil Springs
- Additional parts can be added from the drop down menus
- It’s recommended that these coilovers to be run with aftermarket UCA’s for coilover clearance and correct travel
(13 reviews) -
200 Series Land Cruiser (2008-2021)
Dobinsons C59-545 3″ HD Land Cruiser 200 Series Rear Coils – Pair
- C59-545 – 4″ lift with stock weight, 3″ lift with 220 LBS constant rear weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 500/470mm free height, 248LBF/IN Spring Rate
- Sold as a Pair – marked side specific for installation
(7 reviews)$350.00 Select options This product has multiple variants. The options may be chosen on the product page -
80 Series Land Cruiser (1990-1997)
Dobinsons C59-176 Front Coil Springs | Land Cruiser 80 series 3.0″ Lift with 110LBS Load – Pair
- Suits Land Cruiser 80 Series and Lexus LX450
- C59-176 are Front Linear rate coils to give 3.0″ of lift with up to 110LBS of constant accessory weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(17 reviews) -
60 62 Series Land Cruiser (1980-1989)
Dobinsons 60 Series Drawers for Toyota Land Cruiser 1980-1990
- Suits FJ60 and FJ62 Land Cruiser models from 1980-1990
- 1.6mm Zinc Plated Robust Steel Construction
- 12mm Heavy Duty Plywood Panels with Marine Carpet Covering
- Built in Heavy Duty Fridge Slide, 8 x Heavy Duty Stainless Steel Tie Down Points
- Comprehensive Optional universal outer wing trim kit to provide a factory fit
- Aluminum Edging Protection
- Heavy duty lockable latches
- Massive 150KG (330LB) Drawer Capacity on Heavy Duty Roller Bearing System
- Add optional Dobinsons Rear Drawer Table Top for better useability of the drawer
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address
(3 reviews) -
Tundra 2nd Gen (2007-2021)
Dobinsons C59-578 Front 3″ HD Lift Coil Springs | Toyota Tundra 4×4 2007-2021 – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations. Durable Powder Coat Finish
- Extended length new front struts will be required to use these coils, such as GS59-710 Dobinsons Struts
- Lifts 4″ with stock weight front end, and 3″ with a bumper and winch installed
- Sold in Pairs
- 662LBF/in spring rate, 440mm free height
(18 reviews)$450.00 Select options This product has multiple variants. The options may be chosen on the product page -
KL Cherokee (2014-2022) (Trailhawk)FREE SHIPPING
within 48 US StatesDobinsons Jeep Cherokee Trailhawk Lift Kit for 4X4 KL 2014-2022 inc Sport + Latitude
- Trailhawk (AD2) lifts 1.25″ front and 1.0″ rear. Sport (AD1) models lift 2″ front, and 2″ rear.
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Superior Designed Nitro Gas Shocks, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Includes 2 Front Struts, 2 Rear Shocks, and 4 Coil Springs. Other new OEM components may be required during install.
- GS29-430 Jeep Cherokee KL Front Struts Installation Note
(11 reviews) -
SnorkelFREE SHIPPING
within 48 US StatesDobinsons 80 Series Snorkel Kit for Toyota Land Cruiser 1990-97
- 80 Series Snorkel Kit – Suits Toyota Land Cruiser 80 Series and Lexus LX450 1990-1997 models
- Rotationally molded using precision CNC shaped aluminum dies
- Increases air intake height to allow safer water crossings and reduce dust intake
- Increased air intake height rams cooler, cleaner air into the engine increasing engine performance
- The higher the intake, the less dust is in the air
- Manufactured from high quality UV resistant LLDPE
- Snorkel Kits include template and all mounting hardware
(9 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons C59-223VB Rear Coil Springs | Land Cruiser – Pair Black
- 80 SERIES (1990-1997) and Lexus LX450 – Dobinsons c59-223v – 1.75″ lift with up to 220lbs weight
- 100 SERIES (1998-2007) and Lexus LX470 – Dobinsons C59-223V – 1-1.25″ lift, variable rate, with stock weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – BLACK
- 19mm wire diameter, 445/455mm free height, variable rate
- Sold in Pairs
(0 reviews) -
Rear Drawers
Dobinsons DW59-022K Wing Side Panel Kit for 80 Series LX450 1990-1997
- Suits Toyota Land Cruiser 80 Series 1990-1997 or Lexus LX450
- Complete wing kit for both sides to suit Dobinsons rear drawer systems
- Includes vertical and horizontal pieces, brackets and hardware
- Fills in the side parts left exposed once drawers have been installed, providing a neat finish
- Drawers are sold separately
(3 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons C97-146VTB Dual Rate Front 2.5″ Coils | 80 Series 1990-1997 (Black) – Pair
- Suits Land Cruiser 80 Series and Lexus LX450
- Lifts 2.5″ with 200LBS front end constant weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Black
- VT Series Dual Rate Coils for maximum travel and the best ride quality
- Also made in the teal color
(10 reviews)
