Dobinsons

Showing 571–600 of 1263 resultsSorted by popularity

Roof Racks
Dobinsons Full Length Roof Rack for Land Cruiser 60 80 90 Series
- Suits 1980-1997 Toyota Land Cruiser 60 and 80 Series and Lexus LX450 and Toyota Land Cruiser Prado 95 (LWB) Models RZJ95, VZJ95, KZJ95, KDJ95
- Black Powder Coat
- Full Steel Construction
- 4mm Thick, 50mm x 50mm Mesh Flooring
- 32mm Outer Rail & 25mm Upper Rail
- 330lb rating
- Roof Top Tent Design – flat rack except in the front
- Integrated Tie Down Points
- Roof Rack Tire carrier
- Includes gutter mount fitting kit to secure the rack to your factory gutter rails
- Ships to the nearest freight terminal for you to pickup, or to commercial address with loading dock or forklift. Home delivery is optional, select that add-on down below
Rated 5.00 out of 5
(8 reviews)
$1,205.00 Select options
Dobinsons
FREE SHIPPING
within 48 US States
Dobinsons Toyota Tundra IMS 2.25″-3.0″ Quick Ride Kit or AAL for 2007-2021 4×4 V8
- Suits 2007-2021 Toyota Tundra 4×4 V8 Dual Cabs
- Complete Quick Ride or AAL suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- In the back, you can either lift your truck with the Dobinsons Quick Ride (block and U-bolt) Kit or the Wheeler’s Add-a-leaf Kit
- Coils are specifically suited to provide comfort and lift
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Choose your desired suspension parts to build the kit best suited to your weight
- Affordable suspension system without requiring new rear leaf packs
- Clip height adjustable front struts, massive 2.6″ size body front and rear with 60mm pisons, IFP (Internal Floating Piston) technology
- 4 Clip height settings. Lowest height is stock/OE height. Each clip height adds approximately 1/2″ of lift. Use clip heights to fine tune lift height or offset for vehicle lean
- FRONT ASSEMBLY INSTRUCTIONS
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
Rated 5.00 out of 5
(7 reviews)
From $2,125.00 Select options
Dobinsons
Dobinsons Rear 1/2″ Coil Spacers (Pair) Jeep Wrangler JL and Gladiator
- Suits 2018+ Jeep Wrangler JL 2-door and 4-door and 2020+ Jeep Gladiator JT
- Adds 1/2″ of lift height
- High Quality Polyurethane, maintains height over time
- Perfect fit between OE isolator and coil seat
- Sold in Pairs
- Lasts longer than rubber
- Easy to add lift height for worn coils or when added weight has squatted down the rear
Rated 5.00 out of 5
(2 reviews)
$50.00 Add to cart
Gladiator JT (2020-2025+)
Dobinsons C29-247VB Rear 3.0″ Lift Coils for Jeep Gladiator – Extra Heavy Load – Pair
- Suits 2020+ Jeep Gladiator JT Pickup Truck
- Lifts 3.0″ with 440-660LBS rear end constant weight (bumper, camper, etc)
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Black
- Sold as a Pair
Rated 5.00 out of 5
(8 reviews)
$350.00 Add to cart
Frontier D41 (2022-2025+)
Dobinsons L45-003-R Leaf Springs Pair | Frontier D40 and D41
- 3″ Lift with stock weight on a 2022+ Nissan Frontier D41 Truck, or 2″ with 550LBS Constant Rear Load, 2.0″ Lift on a 2005-2021 D40 Frontier with 550LBS Constant Rear Load
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- To make these springs lighter in light height and payload, remove the #3 leaf (2 down from the top), making them the same as the L45-002-R leaf pack
- These are leaf springs ONLY and don’t come with bushings or any other parts
- Photo for illustration purposes only
Rated 5.00 out of 5
(3 reviews)
$550.00 Add to cart
Frontier D41 (2022-2025+)
Dobinsons L45-002-R Leaf Springs Pair | Frontier D40 and D41 Stock Weight
- 2″ Lift with stock weight on a 2005-2021 Frontier D40 and 2022+ Nissan Frontier D41 Truck
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Photo for illustration purposes only
- These are leaf springs ONLY and don’t come with bushings or any other parts
Rated 5.00 out of 5
(4 reviews)
$450.00 Add to cart
Dobinsons
Dobinsons TB21-1547 Heavy Duty Torsion Bar Pair for Isuzu Amigo – 1000mm (39.37″)
- You MUST measure your stock torsion bar length before ordering here. Isuzu Amigo’s had a few variations worldwide on which torsion bars were used on each vehicle, so it’s required to measure yours first to ensure you order the correct size.
- TB21-1547 are 1000mm (39.37″), 26mm bar thickness
- Increased spring rate to improve handling and lift front end
- Powder coated black for a long lasting finish
- Replaces OE torsion bars without modification
- Torsion bars must be installed with 2/3 suspension down travel and 1/3 up travel to ensure a good ride
Rated 5.00 out of 5
(2 reviews)
$325.00 Add to cart
On Backorder
Pathfinder R51 (2005-2012)
Dobinsons C45-255 Rear 1.5″ Lifted Coil Springs | Nissan Pathfinder R51 – Pair – Teal
- Suits Nissan Pathfinder R51 Rear, 2005 to 2012 models
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Teal
- Spring rate is 392 LBF/in
- Sold as a Pair
Rated 5.00 out of 5
(6 reviews)
$300.00 Add to cart
Dobinsons
FREE SHIPPING
within 48 US States
Dobinsons MRA45-A645 3-Way Adjustable MRR Rear Shocks Pair | Xterra Frontier
- Suits 2005-2015 Nissan Xterra, 2005-2021 Nissan D40 Frontier and Navara with up to 2.0″ of lift
- The terms MRA and MRR are used interchangeably. The A stands for Adjustable in the part number or SKU
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI CNC machined components for precise tolerances
- Parker Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile
- strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- 565mm extended, 361mm compressed
- Sold in Pairs
Rated 5.00 out of 5
(16 reviews)
$1,200.00 Add to cart
On Backorder
Dobinsons
FREE SHIPPING
within 48 US States
Dobinsons GS21-015B Rear Shocks Pair | Isuzu Trooper
- Suits 1992 to 2002 Isuzu Trooper and Acura SLX
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
Rated 5.00 out of 5
(8 reviews)
$310.00 Add to cart
Montero Pajero NM NP NS NT 2000+
FREE SHIPPING
within 48 US States
Dobinsons IMS43-50784 Monotube IFP Rear Shocks Pair | Mitsubishi Montero Pajero 2000+
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- 609mm extended, 389mm compressed
Rated 5.00 out of 5
(8 reviews)
$700.00 Add to cart
Montero Pajero NM NP NS NT 2000+
FREE SHIPPING
within 48 US States
Dobinsons IMS Lift Kit for Mitsubishi Montero Pajero NM NP NS NT 2000-2019
- Suits 2000-2019 Mitsubishi Montero and Pajero SWB and LWB, gas or diesel engines Models NM, NP, NS, NT, NW
- This does not fit the Montero Sport or Challenger models
- Make your selections below based on if you have a 3-Door SWB Model or 5-door LWB Model
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Superior Designed IMS (Internal reservoir Monotube Shocks) with Internal Floating Piston – huge 56mm bore size for maximum dampening control
- Adjustable height front struts to fine tune lift height and leveling if needed
- Japanese NOK Multi-Lip seals
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Includes 2 Front Struts, 2 Rear Shocks, and 4 Coil Springs
- Note: Coil seat should be set at 244mm from the center of the lower bushing to the notch in the coil seat, same as original coil seat height. The coils do the lifting. Fine tuning up or down can be done to tune the height or level the vehicle left to right, if required
- Full 2 year limited warranty, no set rebuild time period
Rated 5.00 out of 5
(3 reviews)
From $1,400.00 Select options
Snorkel
FREE SHIPPING
within 48 US States
Dobinsons Snorkel Kit for Toyota Land Cruiser 70 71 73 74 75 78 79 Series 1985 to 2007 4.2L Diesel
- Suits 4.2L Diesel Toyota Landcruiser 70 71 73 74 75 78 79 Series 1985-2007
- Rotationally molded using precision CNC shaped aluminum dies
- Increases air intake height to allow safer water crossings and reduce dust intake
- Increased air intake height rams cooler, cleaner air into the engine increasing engine performance
- Manufactured from high quality UV resistant LLDPE
Rated 5.00 out of 5
(7 reviews)
$375.00 Add to cart
Dobinsons
Dobinsons 2-2.5″ Lift Kit Toyota Tundra 2000-2006 with Quick Ride Rear (all options)
- For 2000-2006 Toyota Tundra 4×4 with V8 Engine
- Build a complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Includes 2 Front Struts, 2 Rear Shocks, 2 Front Coil Springs (a pair), and optional Rear Spacer Blocks and U-Bolts
- Choose from twin tube, IMS or MRA shocks in the drop down menu below
- It’s recommended that the IMS and MRA coilovers to be run with a diff drop kit and aftermarket UCA’s for coilover clearance and correct travel
Rated 5.00 out of 5
(13 reviews)
From $960.00 Select options
On Backorder
80 Series Land Cruiser (1990-1997)
Dobinsons C59-319 Rear Coil Springs | Land Cruiser 80 Series – Pair
- Suits Land Cruiser 80 Series and Lexus LX450
- C59-319 6″ lift with 200LBS constant weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 545/555mm free height, 22mm wire, 376LBF/in rate
- Sold in Pairs
Rated 5.00 out of 5
(16 reviews)
$450.00 Add to cart
80 Series Land Cruiser (1990-1997)
Dobinsons C59-153 Rear Coil Springs | Land Cruiser 80 Series – Pair
- Suits Land Cruiser 80 Series and Lexus LX450 1990-1997 – C59-153 – 3″ lift with 880LBS constant rear load
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 470/460mm free height, 21mm wire diameter, 394LBF/in spring rate
Rated 5.00 out of 5
(16 reviews)
$450.00 Add to cart
Bundera LJ70/LJ73 - 84-89 - Round Headlights
Dobinsons 1.75″ to 2.5″ Lift Kit for Toyota Land Cruiser Bundera 70 Series 11/84-12/89
- For 11/84 to 12/89 Toyota 70 Series Bundera models, LJ70, LJ73, RJ70 and RJ73 with Round Headlights
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to match OE fitment specs
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base kit includes front and rear coils and shocks
- Choose your coils and load carrying ability, anywhere from 1.75″ up to 2.5″ of Lift
Rated 5.00 out of 5
(10 reviews)
From $1,220.00 Select options
Amigo
Dobinsons Heavy Duty Torsion Bar Pair for Isuzu Amigo
- For Isuzu Amigo models – must measure before ordering
- Increased spring rate to improve handling and lift front end
- Powder coated black for a long lasting finish
- Replaces OE torsion bars without modification
- Torsion bars must be installed with 2/3 suspension down travel and 1/3 up travel to ensure a good ride
Rated 5.00 out of 5
(3 reviews)
From $325.00 Select options
Rear Drawers
Dobinsons Universal Wing Side Panel Kit for Rear Storage Drawers
- Complete universal wing kit to suit Dobinsons rear drawer systems
- Includes vertical and horizontal pieces, all oversized, need to be cut to fit
- Fills in the side parts left exposed once drawers have been installed, providing a neat finish
- Photo attach represents modified universal side wing panel kit added to RD80-1000 drawers in a 60 Series Land Cruiser
- Note: You will have to modify these to fit your vehicle, requiring cutting tools and making your own templates.
Rated 5.00 out of 5
(3 reviews)
$250.00 Add to cart
Accessories
Dobinsons Single Drawer – Universal Mount – Medium Size
- Measures 900mm long x 500mm wide x 275mm high, 75 LBS dry weight
- 1.6mm Zinc Plated Robust Steel Construction
- 12mm Heavy Duty Plywood Panels with Marine Carpet Covering
- 4 x Heavy Duty Stainless Steel Tie Down Points
- Aluminum Edging Protection, Heavy duty lockable latch
- Not compatible with 3rd row seat installed.
- Massive 150KG (330LB) Drawer Capacity on Heavy Duty Roller Bearing System
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address. Ground shipping isn’t available due to potential product damage
Rated 5.00 out of 5
(3 reviews)
$800.00 Select options
40 Series Land Cruiser Late (1980-1984)
Dobinsons FJ40 Full 2.0″ Suspension Kit for Land Cruiser FJ40 BJ40 1980-1984
- For 1980+ Model FJ40’s with 35mm spring eye size front and rear
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
Rated 5.00 out of 5
(10 reviews)
From $1,570.00 Select options
WK2 Grand Cherokee (2011-2022)
Dobinsons Rear Coil Springs for Jeep Grand Cherokee WK2 2010-2022 1.75″ Lift – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Black
- Will Not Suit Vehicles Equipped with Quadra-Lift
- Sold in Pairs
Rated 5.00 out of 5
(16 reviews)
$450.00 Add to cart
Rear Bumpers
Dobinsons Toyota Land Cruiser 200 Series Rear Bumper 2008-2021
- For Toyota Land Cruiser 200 Series from 2008 to 2021
- DOES NOT SUIT MODELS WITH LANE ASSIST
- Comes standard as Black Powder Coat (customer can have his local paint shop color-match as some photos show)
- Stainless Steel Latch and Hardware
- Complete Kit with Everything Included
- All Lighting is 12V LED, requires splicing into original wiring harness (not plug and play)
- Works with Factory Tow Hitch in OE position
- Adjustable offset tire carrier head, suitable up to a 35″ tire
- Instructions Page
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address
Rated 5.00 out of 5
(13 reviews)
$3,150.00 Select options
Snorkel
FREE SHIPPING
within 48 US States
Dobinsons 100 Series Snorkel Kit for Toyota Land Cruiser 1998-2007
- 100 Series Snorkel Kit – Suits Lexus LX470 and Toyota Land Cruiser 100 Series 1998-2007 Models
- Smooth body, no words or logo on the body
- Rotationally molded using precision CNC shaped aluminum dies
- Increases air intake height to allow safer water crossings and reduce dust intake
- Increased air intake height rams cooler, cleaner air into the engine increasing engine performance
- The higher the intake, the less dust is in the air
- Manufactured from high quality UV resistant LLDPE
- Snorkel Kits include template and all mounting hardware
- Installation Instructions
Rated 5.00 out of 5
(9 reviews)
$375.00 Add to cart
New Item
200 Series Land Cruiser (2008-2021)
FREE SHIPPING
within 48 US States
Dobinsons Billet Adjustable Rear Lower Control Arms Pair | WA59-747K
- Suits all 200 Series Land Cruisers from 2008-2021, 300 Series Land Cruiser, 2023+ Toyota Sequoia, 2024+ Land Cruiser 250 Series, Lexus GX550
- Comes with high quality rubber OE style bushings installed for maximum flexibility, and zero noise
- Made from billet aluminum for maximum strength and fantastic looks
- Oversized adjusters and rod thickness for maximum strength and durability with nut locking feature
- Sold as a pair
(0 reviews)
$850.00 Add to cart
250 Series Land Cruiser (2024-2025+)
Dobinsons C59-885V Rear Coil Springs Pair
- Lifts the Rear of a 2024+ Toyota Land Cruiser 250 series 12mm (0.5″) Lift, Variable Rate with stock weight rear end and Lexus GX550 2.0″ with stock weight up to 110LBS of added weight
- These variable rate coils handle loaded weight better than a liner coil, as they get stronger when they get compressed further
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(0 reviews)
$300.00
Coil Color Clear

Dobinsons C59-885V Rear Coil Springs Pair quantity
Select options This product has multiple variants. The options may be chosen on the product page
Full Suspension Kits - Prado 90 95
FREE SHIPPING
within 48 US States
Dobinsons Toyota Land Cruiser Prado 90 95 IMS Lift Kit
- Suits Toyota Land Cruiser Prado 90 and 95 SWB and LWB 4×4 Models
- Suits Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Fully rebuildable and re-valvable shocks
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- Adjustable height front struts from a fully threaded body
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base kit Includes 2 Front IMS Struts, 2 Rear IMS Shocks, and 4 Coil Springs
- Select from Teal, Red, or Black coil springs in the options below
- Note: This Prado 90 platform shares the same suspension design as the 3rd Gen Toyota 4Runner, so many descriptions will list the 3rd Gen 4Runner as that’s what these parts are most commonly sold for. However the weight of the Prado 90 is different, so the coil specs have been adjusted to suit the Prado 90.
(0 reviews)
From $1,900.00 Select options
Replacement Bushings
Dobinsons Lower Shock Bushing – For -940
- Dobinsons replacement lower shock bushing
- Suits Dobinsons shock part number GS59-940, IMS59-50940 and MRA59-A940
- Full list of part numbers this fits is below
- This is for a single bushing only for 1 shock
- High quality natural rubber bushing
- Photo is of actual bushing
- These do not suit IMS59-50941 or MRA59-A941, those use a different size bushing
(0 reviews)
$25.00 Add to cart
On Backorder
250 Series Land Cruiser (2024-2025+)
FREE SHIPPING
within 48 US States
Dobinsons IMS59-60660 2.6″ IFP Front Struts Pair
- Suits Toyota Land Cruiser 250 Series 2024+ and Lexus GX550
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- 22mm / 7/8″ shaft diameter on front struts
- Full 2 year limited warranty, no set rebuild time period
- Standard coil seat height should be set to 237mm (9.3″) from the center of the lower hole to the base notch where the coil sits
- SOLD IN PAIRS
- Shocks do not suit any models that have factory electronic adjustable Shock Absorbers
- Photos for illustration purposes only
(0 reviews)
$800.00 Add to cart
Coil Springs
Dobinsons C59-276B Front Lifted Coil Springs for Toyota 4×4 Trucks and SUV’s – Pair Black
- 3rd Gen 4Runner 4×4 (1996-2002) – Lifts 2″ on a stock to medium load front end
- Toyota Tacoma 4×4 1998 to 2004 – 1.5″ with stock weight
- Suits Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – BLACK
- 362mm free height, 586LBF/in spring rate
- Sold in Pairs
- Also offered in the Teal color
- This is a comparable option to OME 2880 coils, which are 365mm free height, 16mm wire, 500LBF/in spring rate
(0 reviews)
$300.00 Add to cart