Your cart is currently empty!
Dobinsons
Showing 1081–1110 of 1263 resultsSorted by popularity
-
MRR 3-Way Adjustable Remote ResiFREE SHIPPING
within 48 US StatesDobinsons MRR 2.6″ Smoothie Shock – 10″ Travel 3-Way Adjustable
- Dobinsons MRA 2.6″ Body Universal Smoothie Shock – offered in 10″, 12″ and 14″ Travel lengths
- MRA92-A2520 – 10″ Travel Shock
- Extended Length: 29.45″ / 750mm
- Compressed Length: 19.48″ / 496mm
- Reservoir Length: 10″ / 250mm
- Hose Length: 19.6″ / 500mm
- Rod Diameter: 22mm / 7/8″
- MRA means Monotube Remote (reservoir) Adjustable
- The terms MRA and MRR are used interchangeably. The A stands for Adjustable in the part number or SKU
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 5140 HV900 Hard Chrome Plated, Heat Treated 22mm micro-polished high strength shock shaft.
- Shaft minimum tensile strength exceeding 700MPA / 100 PSI and hardness exceeding 46HRC
- 2.6″ Shock Body precision honed to +/- 0.04mm
- Zinc plated DOM 3mm steel shock body for ultimate corrosion protection
- Parker Steel braided, rubber coated high pressure hoses
- Lightweight CNC machined low friction floating piston
- 3 Stage FMJ+HNBR long life, low friction sealing system
- PTFE lined high quality spherical bearings
- Fully rebuildable and tunable
- Dual rate design with high quality slider & cross-over rings
- 64mm Finned Reservoir
- 350V.I. High performance damper fluid
- T6061 CNC machined ultra high flow race piston
- Includes universal reservoir isolators and hose clamps
- Replacement shims and misalignment spacers are included
- SINGLE SHOCK INCLUDED (Add two to cart for pair)
- WARNING PLEASE READ this notice about misalignment spacers
- Fully detailed guide and owners manual – MUST READ before ordering to understand setting up the shocks
- Limited Warranty details down below
(7 reviews) -
Expedition 2008-2017 119in WheelbaseFREE SHIPPING
within 48 US StatesDobinsons Front Struts Pair | Ford Expedition 119″ WB 2014-2017
- Suits the front of Ford Expedition 119″ wheelbase, from 2014-2017, OE struts have studs pressed into the lower mounting bar
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Sold in Pairs, one for the left side and one for the right side
- Stocked here in the USA
- Photo for illustration purposes only
(8 reviews) -
Expedition 2008-2017 119in WheelbaseFREE SHIPPING
within 48 US StatesDobinsons Rear Struts Pair | Ford Expedition 119″ WB 2008-2017
- Suits the rear of Ford Expedition 119″ wheelbase, from 2008-2017
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Sold in Pairs, one for the left side and one for the right side
- Stocked here in the USA
- Photo for illustration purposes only
(8 reviews) -
Expedition 2008-2017 119in WheelbaseFREE SHIPPING
within 48 US StatesDobinsons Front Struts Pair | Ford Expedition 119″ WB 2008-2013
- Suits the front of Ford Expedition 119″ wheelbase, from 2008-2013
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Sold in Pairs, one for the left side and one for the right side
- Stocked here in the USA
- Photo for illustration purposes only
(8 reviews) -
Expedition 2008-2017 119in Wheelbase
Dobinsons C19-431 1.75″ Lift Rear Coils | Ford Expedition 2008-2017 – Pair
- 1.75″ rear lift coils for a Ford Expedition 119″ wheelbase from 2008-2017 with stock rear end weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold as a Pair
- This product is a special order from Australia, and that can easily take 4-6 months to get. Confirm below that you understand that the order can’t be cancelled once placed
(17 reviews) -
Expedition 2008-2017 119in Wheelbase
Dobinsons C19-433 1.75″ Lift HD Rear Coils | Ford Expedition 2008-2017 – Pair
- 1.75″ HD rear lift coils for a Ford Expedition 119″ wheelbase from 2008-2017 with 400LBS of constant rear end weight, like a bumper, tent, trailer, etc
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold as a Pair
- This product is a special order from Australia, and that can easily take 4-6 months to get. Confirm below that you understand that the order can’t be cancelled once placed
(16 reviews) -
Expedition 2008-2017 119in Wheelbase
Dobinsons C19-432 1.75″ Lift HD Front Coils | Ford Expedition 2008-2017 – Pair
- 1.75″ front lift coils for a Ford Expedition 119″ wheelbase from 2008-2017 with 160-220LBS of constant front end weight, like a bumper, winch, etc
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold as a Pair
- This product is a special order from Australia, and that can easily take 4-6 months to get. Confirm below that you understand that the order can’t be cancelled once placed
(16 reviews) -
Expedition 2008-2017 119in Wheelbase
Dobinsons C19-430 1.75″ Lift Front Coils | Ford Expedition 2008-2017 – Pair
- 1.75″ front lift coils for a Ford Expedition 119″ wheelbase from 2008-2017 with stock weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold as a Pair
- This product is a special order from Australia, and that can easily take 4-6 months to get. Confirm below that you understand that the order can’t be cancelled once placed
(13 reviews) -
Excluded
Dobinsons HZJ75-8L-F Front Heavy Load Leaf Springs Pair
- Front Heavy Load Leaf Springs for the Toyota – FZJ77, HZJ77, PZJ77 from 1993-1999, 70 Series – HZJ70, HZJ73, PZJ70, PZJ73 1990-1999, 75 Series – FZJ75, HZJ75 1990-1999 and FZJ77, HZJ77, PZJ77 1993-1999
- 45mm front lift with 110-220LBS constant front end weight (bumper, winch, etc)
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Sold as a pair
(4 reviews) -
Grand Vitara (2005-2015)
Dobinsons Suzuki Camber Bolt Kit WA57-506K
- Suits Suzuki Grand Vitara 8/2005-2015
- ±1.2° for Lower Control Arm Camber Adjustment
- Essential when lifting Vehicles
- Easy to adjust and set once installed
- Includes Instructions
(8 reviews) -
Dobinsons
Dobinsons 30mm Polyurethane Coil Spacer (Single) PS29-4015
- Specifically suited to the Front and Rear of a Suzuki Sidekick, Geo Tracker or the front of a Jeep Cherokee XJ and Jeep TJ or LJ
- 30mm (1.2″) thick
- High Quality Polyurethane, maintains height over time
- Perfect fit between OE isolator and coil seat
- Sold individually, available front and rear for several vehicles
- Lasts longer than rubber
- Easy to add lift height for worn coils
- Photo for illustration purposes
(2 reviews) -
Sidekick/Tracker (1988-1998)
Dobinsons C57-017 Rear Coils | Suzuki Sidekick and Tracker LWB – Pair
- Dobinsons C57-017 Rear 30mm Lifted Coil Springs for the Suzuki Sidekick and Tracker LWB (Long Wheel Base) 1988-1997
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(18 reviews) -
Lighting
Dobinsons Wiring Harness for 155 Watt LED Lights
- Suitable for Zenith driving light LED Pair
- Includes switch, relay, and wiring harness, plug and play style
- Water proof light connector, harness comes with 1 x male plug end
- Very fast to install
- May suit other brands of lights, check connection photo for verification
(18 reviews) -
Rear Drawers
Dobinsons DW59-036K Wing Side Panel Kit for 4th Gen 4Runner 2003-2009
- Suits Toyota 4Runner 4th Gen 2003-2009
- Complete wing kit for both sides to suit Dobinsons rear drawer systems
- Includes vertical and horizontal pieces, brackets and hardware
- Fills in the side parts left exposed once drawers have been installed, providing a neat finish
- Drawers are sold separately
(3 reviews) -
Bump Stops + SpacersFREE SHIPPING
within 48 US StatesDobinsons 2.2″ Hydraulic Bump Stop IFS Weld on Mount Kit
- Kit includes front Weld on Mounts (Pair) and Dobinsons HBS56-009 Pair of Hydro Bump Stops
- Made for IFS (independent front suspension) vehicles to replace the OEM rubber bump stop
- HBS56-009 – 56mm (2.2″) body | 46mm (1.8″) stroke | 188mm (7.4″) extended | 142mm (5.6″) compressed | 105mm (4.0″) thread length
- CNC Machined 50mm Billet Aluminum Piston
- EDP Coated 3mm Thick 56mm Steel Body
- Threaded Body For Height Adjustment
- Supplied with both Interchangeable Super Quiet Rubber Rod End & Hard Nylon
- 30mm Micro Polished Hard Chrome Shaft
- Slow Rebound Valving To Prevent Bucking
- Removable Dust Cover Boot For Stealth Appearance
- Fully Rebuildable & Tunable
- O-Ring Travel Indicator
- Heavy Duty Extreme-Race style Triple Seal Design
- Nitrogen Gas Charged & Tunable (100 to 300 PSI)
- Pre-charged to 150 PSI
- Extra Short Dead Lengths For Compact Fitment
- Universal design threaded weld on bump stop can to hold the 2.2″ body bump stop
- Cans have 3mm walls for increased strength
- Kit is ideal for those who bottom out often in their offroad driving or go really hard at high speeds
- Could suit a wide range of vehicles as listed below, but remember they are universal and will require adaptation to your vehicle and welding
- Custom fitting and welding is required
- Photo attached shows these bump stops installed with the weld-on mounts on a 3rd Gen Tacoma
(0 reviews) -
Bump Stops + SpacersFREE SHIPPING
within 48 US StatesDobinsons Hydro 2.2″ Bump Stops – 1.8″ Stroke, 7.4″ Extended (Pair) – HBS56-009
- HBS56-009 – 56mm (2.2″) body | 46mm (1.8″) stroke | 188mm (7.4″) extended | 142mm (5.6″) compressed | 105mm (4.0″) thread length
- CNC Machined 50mm Billet Aluminum Piston
- EDP Coated 3mm Thick 56mm Steel Body
- Threaded Body For Height Adjustment
- Supplied with both Interchangeable Super Quiet Rubber Rod End & Hard Nylon
- 30mm Micro Polished Hard Chrome Shaft
- Slow Rebound Valving To Prevent Bucking
- Removable Dust Cover Boot For Stealth Appearance
- Fully Rebuildable & Tunable
- O-Ring Travel Indicator
- Heavy Duty Extreme-Race style Triple Seal Design
- Nitrogen Gas Charged & Tunable (100 to 300 PSI)
- Pre-charged to 150 PSI
- Extra Short Dead Lengths For Compact Fitment
- No mounting cans or mounting fit kit is included (sold separately)
- Photo attached shows these bump stops installed with the weld-on mounts
(0 reviews) -
Bump Stops + SpacersFREE SHIPPING
within 48 US StatesDobinsons 2.2″ Hydraulic Bump Stop IFS Weld on Mounts
- Universal design threaded weld on bump stop can to hold a 2.2″ body bump stop
- Intended to be used with the Dobinsons HBS59-009 Hydro bumps
- 3mm walls for increased strength
- Sold as a pair
- Ideal for those who bottom out often in their offroad driving or go really hard at high speeds
- Could suit a wide range of vehicles as listed below, but remember they are universal and will require adaptation to your vehicle and welding
- Custom fitting and welding is required
(6 reviews) -
Coil Springs
Dobinsons C59-274 Front Lifted Coil Springs for Toyota 4×4 Trucks and SUV’s – Pair
- 3rd Gen 4Runner 4×4 V6 (1996-2002) – Lifts 3/4″ on a stock to medium load front end
- Toyota Tacoma 4×4 V6 1998 to 2004 – Stock height with stock weight (may vary depending on cab and bed configuration)
-
Suits Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 349mm free height, 586LBF/in spring rate, 17mm wire
- Sold in Pairs
(14 reviews) -
Dobinsons
Dobinsons Big Bore 2007+ Land Cruiser Steering Damper SD59-825
- Suits Land Cruisers, Series 71. 76. 78 and 79 series from 2007 onwards
- These are solid-front axle Land Cruisers that are not sold in the USA
- A new steering damper helps fight bump steer and makes driving offroad feel smoother from the driver’s seat
- If you don’t know how old your current steering damper is, then it’s time to replace it
- Induction Hardened Rods for strength, no Viscosity Drop due to High Shear Stability
- Cellular Foam Cell Insert
- Teflon Piston Rings
- Excellent Viscosity Temperature Performance
- NOK Triple Lip Oil Seals
- High Quality Fuchs German Oil
- Replaces OE steering damper, bolts into place
- Specifications: 750mm extended, 510mm compressed, ball joints at both ends
- Photos are for illustration purposes only
(2 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons IMS51-60116 Front IMS 2.6″ Shocks Pair
- For a 3″ front lift on Nissan GQ/GU Patrol and Toyota 78 or 79 Series Land Cruiser
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
(8 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons IMS45-60915 Rear IMS 2.6″ Shocks Pair
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
(8 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons IMS45-60914 Front IMS 2.6″ Shocks Pair
- For a 4″ front lift on Nissan GQ/GU Patrol and Toyota 78 or 79 Series Land Cruiser
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
(8 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons IMS45-60913 Rear IMS 2.6″ Shocks Pair
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
(8 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons IMS45-60115 Rear IMS 2.6″ Shocks Pair
- Full vehicle fitment list is down below
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
(8 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons IMS45-60114 Front IMS 2.6″ Shocks Pair
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
(8 reviews) -
300 Series Land Cruiser (2021+)FREE SHIPPING
within 48 US StatesDobinsons IMS59-60440 2.6″ IFP Front Struts Pair | Toyota LC250 LC300 Lexus GX550
- Suits Toyota Land Cruiser 300 Series 2021+ (not sold in the USA), and is an Extended Travel Option for 2024+ Toyota Land Cruiser 250 Series and Lexus GX550 for 2-3″ of lift
- Adjusters on the shock body are black, not purple
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- 22mm / 7/8″ shaft diameter on front struts
- 624mm extended, 453mm compressed
- Full 2 year limited warranty, no set rebuild time period
- SOLD IN PAIRS
- Note: If installed on a Toyota Land Cruiser 250 Series or Lexus GX550, a diff drop kit and aftermarket UCA’s must be run to prevent CV bind and coil spring contact at full droop
(8 reviews) -
DobinsonsFREE SHIPPING
within 48 US StatesDobinsons GS43-788 Rear Shocks Pair | Isuzu Amigo Honda Passport 99-02
- Suits Isuzu Amigo and Honda Passport 2/1999 to 2002 models.
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls
- Japanese NOK Multi-Lip seals
- Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Note: Photo is not of actual GS43-788 shock, used for reference of color only
- 484mm extended, 305mm compressed
(10 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons 3-Way Adjustable MRR Rear Shocks Pair | Jeep Gladiator JT (2-4″ lift)
- 3-way adjustable valving – adjust high and low speed compression and rebound
- The terms MRA and MRR are used interchangeably. The A stands for Adjustable in the part number or SKU
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Piggyback Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Sold in Pairs
- 732mm extended, 451mm compressed
(14 reviews) -
Montero Pajero NM NP NS NT 2000+FREE SHIPPING
within 48 US StatesDobinsons 3-Way Adjustable MRR Lift Kit | Mitsubishi Montero Pajero NM NP NS NT 2000-2019
- Suits 2000-2019 Mitsubishi Montero and Pajero SWB and LWB, gas or diesel engines Models NM, NP, NS, NT, NW
- This does not fit the Montero Sport or Challenger models
- Make your selections below based on if you have a 3-Door SWB Model or 5-door LWB Model
- The terms MRA and MRR are used interchangeably. The A stands for Adjustable in the part number or SKU
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Shock Design
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Includes 2 Front Struts, 2 Rear Shocks, and 4 Coil Springs
- Note: Coil seat should be set at 244mm from the center of the lower bushing to the notch in the coil seat, same as original coil seat height. The coils do the lifting. Fine tuning up or down can be done to tune the height or level the vehicle left to right, if required
- Full 2 year limited warranty, no set rebuild time period
(7 reviews) -
Montero Pajero NM NP NS NT 2000+FREE SHIPPING
within 48 US StatesDobinsons MRR 3-Way Adjustable Rear Shocks Pair | Mitsubishi Montero Pajero 2000+
- 3-way adjustable valving – adjust high and low speed compression and rebound
- The terms MRA and MRR are used interchangeably. The A stands for Adjustable in the part number or SKU
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Universal Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Photos for illustration purposes
(13 reviews)
