Your cart is currently empty!
Exceptions
Showing 961–990 of 1089 resultsSorted by popularity
-
Skid Plates + Sliders - 5th Gen 4RunnerFREE SHIPPING
within 48 US States2010-2024 Toyota 4Runner Rock Sliders
- Suits 2010-2024 Toyota 4Runner without XREAS Suspension
- All Pro Offroad 4Runner Rock Sliders have been trail tested on some of the most grueling trails around, from the Rubicon to the Hammers
- They are built from heavy-duty .120″ wall tubing
- The shape of our 4Runner Rock Sliders is very critical and determines how much body protection it will provide as well as how the truck slides along the obstacles without getting hung up
- The outer tubes of the 4Runner Rock Sliders are 1.75″ diameter, and angle upward to provide maximum ground clearance and door protection
- All-Pro Rock 4Runner Rock Sliders not only look great but can be used as a lift point, easily holding the full weight of the vehicle.
- Made from hefty 1.75” x .120 wall DOM steel tubing with 1.75” round legs that are fully gusseted
- MADE IN THE USA
- INSTALLATION INSTRUCTIONS
(3 reviews) -
JK Wrangler (2007-2018)FREE SHIPPING
within 48 US StatesKing 4WD Premium Jeep JK 2 Door Soft Top w/ Tinted Windows | 2007-2009
- Suits 2007-2009 Jeep Wrangler JK 2 Door soft top convertibles
- Does not include any framework
- Black Diamond Fabric with 31% smoke colored window tint
- Black Diamond Fabric
- Specification: Two Layer 24oz Marine Grade – Waterproof
- Testing: CFFA, FMVSS & SAE Requirements
- Specification: UV Approved
- Testing: Accelerated Light Aging Test – 1000 Hours
- Window Glass
- Specification: 96g DOT Approved Pressed flexible vinyl, undistorted, won’t shrink or yellow
- Testing: CFFA, FMVSS & SAE Requirements
- Zippers
- Specification: Reinforced nylon self-correcting zippers
- Testing: 50,000 Cycle Test – No bind or drag
- Velcro
- Specification: Industrial Grade Fiber
- Testing: 150 kg (330 lbs.) per square inch
- Seams
- Specification: 135-gauge thread with heat sealed seams, 4-piece thread per inch
- Testing: CFFA, FMVSS & SAE Requirements
- Belt Rails
- Specification: Polyethylene and Anti Cracking
- Testing: CFFA, FMVSS & SAE Requirements
(9 reviews) -
JK Wrangler (2007-2018)FREE SHIPPING
within 48 US StatesKing 4WD Premium Jeep JK 4Door Unlimited Soft Top w/ Tinted Windows | 2007-2009
- Suits 2007-2009 Jeep Wrangler JK 4Door Unlimited soft top convertibles
- Does not include any framework
- Black Diamond Fabric with 31% smoke colored window tint
- Black Diamond Fabric
- Specification: Two Layer 24oz Marine Grade – Waterproof
- Testing: CFFA, FMVSS & SAE Requirements
- Specification: UV Approved
- Testing: Accelerated Light Aging Test – 1000 Hours
- Window Glass
- Specification: 96g DOT Approved Pressed flexible vinyl, undistorted, won’t shrink or yellow
- Testing: CFFA, FMVSS & SAE Requirements
- Zippers
- Specification: Reinforced nylon self-correcting zippers
- Testing: 50,000 Cycle Test – No bind or drag
- Velcro
- Specification: Industrial Grade Fiber
- Testing: 150 kg (330 lbs.) per square inch
- Seams
- Specification: 135-gauge thread with heat sealed seams, 4-piece thread per inch
- Testing: CFFA, FMVSS & SAE Requirements
- Belt Rails
- Specification: Polyethylene and Anti Cracking
- Testing: CFFA, FMVSS & SAE Requirements
(8 reviews) -
JK Wrangler (2007-2018)FREE SHIPPING
within 48 US StatesKing 4WD Premium Jeep JK 4Door Unlimited Soft Top w/ Tinted Windows | 2010-2018
- Suits 2010-2018 Jeep Wrangler JK 4Door Unlimited soft top convertibles
- Does not include any framework
- Black Diamond Fabric with 31% smoke colored window tint
- Black Diamond Fabric
- Specification: Two Layer 24oz Marine Grade – Waterproof
- Testing: CFFA, FMVSS & SAE Requirements
- Specification: UV Approved
- Testing: Accelerated Light Aging Test – 1000 Hours
- Window Glass
- Specification: 96g DOT Approved Pressed flexible vinyl, undistorted, won’t shrink or yellow
- Testing: CFFA, FMVSS & SAE Requirements
- Zippers
- Specification: Reinforced nylon self-correcting zippers
- Testing: 50,000 Cycle Test – No bind or drag
- Velcro
- Specification: Industrial Grade Fiber
- Testing: 150 kg (330 lbs.) per square inch
- Seams
- Specification: 135-gauge thread with heat sealed seams, 4-piece thread per inch
- Testing: CFFA, FMVSS & SAE Requirements
- Belt Rails
- Specification: Polyethylene and Anti Cracking
- Testing: CFFA, FMVSS & SAE Requirements
(6 reviews) -
Sale!SamuraiFREE SHIPPING
within 48 US StatesKing 4WD Premium Suzuki Samurai Soft Top w/ Tinted Windows
- King 4WD Replacement Soft Top Fits 1986-1994 Suzuki Samurai and Sierra with Factory Soft Top
- Does not include any framework
- Black Diamond Fabric with 31% smoke colored window tint
- Black Diamond Fabric
- Specification: Two Layer 24oz Marine Grade – Waterproof
- Testing: CFFA, FMVSS & SAE Requirements
- Specification: UV Approved
- Testing: Accelerated Light Aging Test – 1000 Hours
- Window Glass
- Specification: 96g DOT Approved Pressed flexible vinyl, undistorted, won’t shrink or yellow
- Testing: CFFA, FMVSS & SAE Requirements
- Zippers
- Specification: Reinforced nylon self-correcting zippers
- Testing: 50,000 Cycle Test – No bind or drag
- Velcro
- Specification: Industrial Grade Fiber
- Testing: 150 kg (330 lbs.) per square inch
- Seams
- Specification: 135-gauge thread with heat sealed seams, 4-piece thread per inch
- Testing: CFFA, FMVSS & SAE Requirements
- Belt Rails
- Specification: Polyethylene and Anti Cracking
- Testing: CFFA, FMVSS & SAE Requirements
(10 reviews) -
TJ Wrangler (1996-2006)FREE SHIPPING
within 48 US StatesKing 4WD Premium TJ Wrangler Soft Top w/ Tinted Windows, w/ Upper Doors 1996-2006
- Suits 1997-2006 Jeep Wrangler TJ 2-door soft top convertibles (not LJ Unlimited)
- Includes full soft top with upper half door windows
- Does not include any framework
- Black Diamond Fabric with 31% smoke colored window tint on rear windows and CLEAR front door windows
- Black Diamond Fabric
- Specification: Two Layer 24oz Marine Grade – Waterproof
- Testing: CFFA, FMVSS & SAE Requirements
- Specification: UV Approved
- Testing: Accelerated Light Aging Test – 1000 Hours
- Window Glass
- Specification: 96g DOT Approved Pressed flexible vinyl, undistorted, won’t shrink or yellow
- Testing: CFFA, FMVSS & SAE Requirements
- Zippers
- Specification: Reinforced nylon self-correcting zippers
- Testing: 50,000 Cycle Test – No bind or drag
- Velcro
- Specification: Industrial Grade Fiber
- Testing: 150 kg (330 lbs.) per square inch
- Seams
- Specification: 135-gauge thread with heat sealed seams, 4-piece thread per inch
- Testing: CFFA, FMVSS & SAE Requirements
- Belt Rails
- Specification: Polyethylene and Anti Cracking
- Testing: CFFA, FMVSS & SAE Requirements
(8 reviews) -
Upper Control ArmsFREE SHIPPING
within 48 US StatesETA is late MarchDobinsons Billet Aluminum UCA’s Pair | 22-25 Tundra, 23-25 Sequoia
- Super strong billet aluminum front upper control arms (UCA’s)
- Suits 2022-2025+ Toyota Tundra, 2023-2025+ Toyota Sequoia
- Complete kit for both left and right hand side
- OE-style sealed ball joints for a maintenance free life
- OE-style high quality rubber bushings for maximum NVH dampening and longevity
- No greasing or maintenance required at all, completely noise-free operation
- Adjustable on-vehicle for quick and easy alignment.
- Adjustable Camber and Caster for perfecting the vehicle’s handling
- O-ring sealed ball joint cap for protection against the elements
- Works for any lift height of 1.5″ or more
- *Must reuse OEM Washers
- Installation Instructions
- We recommend visiting an offroad specific shop for alignment, a regular alignment shop may not be able to adjust and align properly due to the added adjustability these arms offer
- Photos for illustration purposes
(0 reviews) -
Sequoia 1st Gen (2001-2007)FREE SHIPPING
within 48 US StatesDobinsons 3-Way Adjustable MRA 0-2.5″ Sequoia Lift Kit | 2001-2007
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Universal Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
- The included droop spacer goes on top of the strut, under the first washer, if lifting more than 2.0″ (see attached photo)
- Additional optional parts can be added from the drop down menus
(6 reviews) -
Performance Upgrades - JL WranglerFREE SHIPPING
within 48 US StatesZ Automotive Jeep Wrangler JL Front Camera
- Grille mounted camera for Jeep Wrangler JL except 4XE and 392 (see JT Camera Kit)
- Attaches to the front grille neatly and discretely as shown in the photo
- Requires a Tazer JL or Tazer JL Mini to activate the “cargo camera” input on your screen
- Works on the 8.4 Uconnect only
- If the Tazer JL / Mini is present, this camera input can be activated at any time, in any drive mode, and at any speed, as long as you want
- It makes a perfect trail camera as well as for parking.
- This is a high-quality standard definition (480i) camera
- Download Instructions
(7 reviews) -
Late FJ Cruiser (2010-2016)FREE SHIPPING
within 48 US StatesDobinsons 2-3.5″ Extended Travel Pre-Assembled IMS Coilovers for FJ Cruiser 2010+
- Suits 2010-2017 Toyota FJ Cruiser 4×4 Models
- Looking for a quick and easy way to lift your FJ Cruiser? This is your answer
- A 4×2 model lifts 1″ extra with the 4×4 lift heights
- Select your desired lift height and spring rate – we’ll take care of the rest!!
- Dobinsons IMS are height adjustable by a fully threaded body
- The Dobinsons IMS Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
- Fully rebuildable and re-valvable
- Extended Travel – 575mm fully extended, 430mm compressed
- SOLD IN PAIRS – READY TO BOLT IN
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Photos for illustration purposes
- Instructions for setting coil seat height
- To run these Extended Travel coilovers, new UCA’s need to be added for proper articulation and correct wheel alignment. A diff drop kit is also recommended to minimize CV binding at full droop
- Click to see Matching rear shocks
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
(5 reviews) -
Late FJ Cruiser (2010-2016)FREE SHIPPING
within 48 US StatesDobinsons 1.5-2.5″ Pre-Assembled IMS Coilovers for FJ Cruiser 2010+
- Suits 2010-2017 Toyota FJ Cruiser 4×4 Models
- Looking for a quick and easy way to lift your FJ Cruiser? This is your answer
- A 4×2 model lifts 1″ extra with the 4×4 lift heights
- Select your desired lift height and spring rate – we’ll take care of the rest!!
- Dobinsons IMS are height adjustable by a fully threaded body
- The Dobinsons IMS Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
- Fully rebuildable and re-valvable
- 560mm extended, 420mm compressed
- SOLD IN PAIRS – READY TO BOLT IN
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Photos for illustration purposes
- Instructions for setting coil seat height
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle. Adding 2.5″ or more lift, new UCA’s should be added for proper articulation and correct wheel alignment
- Click to see Matching rear shocks
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
(5 reviews) -
Bronco (2021-2025+)FREE SHIPPING
within 48 US StatesDobinsons Rear Adjustable Panhard Rod for Ford Bronco 2021+
- Suits Ford Bronco 2021-2023+ (not sport models)
- Replaces OE Rear Panhard Rod, adjustable to suit lift height
- Zinc plated steel then E-coated with all hardware and high quality rubber bushes supplied
- Off-car adjustable, cannot be set while fully installed
- For 0-4″ of lift
- Rubber Bushes offer greater flexibility than polyurethane, providing maximum articulation
- Photo for illustration purposes
(3 reviews) -
Pathfinder R51 (2005-2012)FREE SHIPPING
within 48 US StatesDobinsons 1.5″ Lift IMS Coilovers for Nissan Pathfinder R51
- Suits 2005-2012 Nissan Pathfinder R51 4×4 Models – Lifts 1.5″ over stock
- Looking for a quick and easy way to lift your Pathfinder? This is your answer
- Dobinsons IMS are height adjustable by a fully threaded body
- The Dobinsons IMS Coilovers will come pre-assembled with new struts, coils and top mounts
- Fully rebuildable and re-valvable
- SOLD IN PAIRS – READY TO BOLT IN
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Photos for illustration purposes
- Instructions for setting coil seat height
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
(6 reviews) -
Bronco (2021-2025+)FREE SHIPPING
within 48 US StatesETA is late MarchDobinsons Billet Aluminum Ford Bronco UCA Pair | Bronco 2021+
- Suits Ford Bronco 2021+ (full size Bronco)
- Super strong billet aluminum front upper control arms (UCA’s)
- Complete kit for both left and right hand side
- OE-style sealed ball joints for a maintenance free life
- OE-style high quality rubber bushings for maximum NVH dampening and longevity
- No greasing or maintenance required at all, completely noise-free operation
- Adjustable on-vehicle for quick and easy alignment.
- Adjustable Camber and Caster for perfecting the vehicle’s handling
- O-ring sealed ball joint cap for protection against the elements
- Works for any lift height of 1.5″ or more
- Photos for illustration purposes
- We recommend visiting an offroad specific shop for alignment, a regular alignment shop may not be able to adjust and align properly due to the added adjustability these arms offer
(0 reviews) -
SnorkelFREE SHIPPING
within 48 US StatesSafari Snorkel for Toyota FJ Cruiser Snorkel 2010-2016
- Suits Toyota FJ Cruiser 2010-2016
- Safari V-Spec Snorkel
- Relocates Your Engine’s Air Intake Point to a Higher Location
- Crosslinked Polyethylene Construction
- Built to Perform in Extreme Weather Conditions
- Comes With Stainless Steel and Plated Hardware
- Bolt-On Installation; Drilling Is Required
- Supported by a 2-Year Warranty
- Fully Designed and Manufactured in Australia
- Designed and manufactured in Australia
- Requires cutting and drilling of the fender and A-pillar. Full instructions and template provided.
(20 reviews) -
Safari Snorkel
Safari Snorkel SS1080HF for Jeep Gladiator and JL Wrangler
- Suits Jeep Wrangler JL and Gladiator JT with the 2.0L or 3.6L gas engines. Does not suit diesel or any other variant
- Relocates Air Intake Above Windshield
- Reinforces Performance in Extreme Conditions
- Crafted from Tough and Lightweight, UV Protected Polyethylene
- Connection Ducts Made of EPDM Molded Rubber
- With High-Flow Air Duct
- Uses High-Grade Stainless Steel Hardware
- CAD-Engineered for a Precise Fit
- Installation Requires Modifications
- Requires cutting and drilling of the exterior body parts (hood)
- Ties into Factory Air Box
- Carries a 3-Year Limited Warranty
- Made in Australia
(24 reviews) -
Full Suspension Kits - Sequoia 2nd GenFREE SHIPPING
within 48 US States3″F / 2″R SST Lift Kit – Toyota Sequoia 2008-2022
- Safely lift your 2008-22 Toyota Sequoia 3 Inches front and 2″ rear
- Fits 2WD and 4WD
- Works only in conjunction with stock suspension
- Allows for up to a 35×12.50 tire
- Retains factory steering radius
- Includes important front differential drop kit
- Includes limited lifetime warranty
- *Not for use on vehicles with adjustable rear suspension or TRD Pro models
- Installation Instructions
(12 reviews) -
Late FJ Cruiser (2010-2016)
RCI 2010+ FJ Cruiser Engine Skid Plate
- Fits Toyota FJ Cruiser 2010-2017 models
- Includes front skid plate ONLY
- Protects front two cross-members, low hanging front differential, oil pan, transmission, second and third cross-members, exhaust cross pipe, and transfer-case
- Excellent addition or replacement of weak, lightweight OEM skid plates
- Simple installation and removal of all subsections for maintenance
- Built in oil drain holes allow easy access and ability to change oil without removal of plate
- Engine skid plates come standard with center mounting posts for substantially increased strength
- Engine skid plate includes differential drop cage for maximum security and ground clearance, PLUS this feature allows the use of differential drop kits without having to space the skid plate down
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Smooth, flat surface that easily slides over obstacles
- Black powder coat finish is standard on steel skid plates for a rust resistant, durable and high quality finish, optional on aluminum
- Installs in minutes
- Grade 8 hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Made in the USA
(3 reviews) -
Awning Walls + RoomsFREE SHIPPING
within 48 US StatesOVS Nomadic 6.5FT Awning Shade Wall (Front)
- Mounts to the end of the awning (away from the vehicle)
- Slides into the channel at the end of the awning
- Body Material: 600D Poly Cotton Rip Stop
- Mounting: C Channel Slide
- Treatment: Waterproofing on Canvas
- QTY: 1
- Set Up Time: 1 Minute
- Warranty: 4 Year Limited Warranty
(0 reviews) -
Awning Walls + RoomsFREE SHIPPING
within 48 US StatesOverland Vehicle Systems Nomadic 6.5FT Awning Side Shade Wall
- Awning Side Wall / Wind Break for 6.5FT Awnings
- Body Material: 600D Poly Cotton Rip Stop
- Mounting: Velcro Straps
- Can Mount to Either Side of Awning (not the end)
- Treatment: Waterproofing on Canvas
- QTY: 1
- Open Dimensions: X” x X” x X”
- Set Up Time: 1 Minute
- Warranty: 4 Year Limited Warranty
(3 reviews) -
Overland Vehicle Systems (OVS)FREE SHIPPING
within 48 US StatesOverland Vehicle Systems Aluminum Storage Box 53QT
- Body: Aluminum Sheeting
- Lid: Aluminum Sheeting
- Handles: Yes, 2
- Latches: Yes, 2
- Lockable: Yes, 4 pad lock openings, 2 on each latch
- Stackable: Yes
- Lid Support: Yes, 2 poly straps
- Color: Black
- Size: 53 QT
- Weather Seal: Yes
- External Dimension: 22 ¾” x 15” x 11 ¼”
- Internal Dimension: 20 ¾” x 13” x 10”
- Box Lid Depth: ½”
(11 reviews) -
Ranger 2019+ (US Spec)FREE SHIPPING
within 48 US StatesDobinsons 1.75-3″ IMS Quick Ride Kit for Ford Ranger 2019-2023 USA Spec
- For USA Spec Ford Ranger 2019-2023+ 4×4 Trucks
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Fully rebuildable and re-valvable monotube shocks
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Multiple coil and leaf spring options
- Select your preferences below to build a complete suspension kit
- Photos are for illustration purposes, not of actual parts
(8 reviews) -
BrakesFREE SHIPPING
within 48 US StatesPowerbrake X-Line Front Mercedes G-Wagen Big Brake Kit W463 2002-2018
2002-2018 W463 Mercedes G-Wagen Big Brake Kit Includes:
- X-Line billet 6-piston off-road calipers (pair)
- High-performance brake pads, pre-loaded into the calipers
- 2-Piece 14.6″ x 1.34″ 72-vane discs
- Semi-float disc drive system allows for radial disc expansion and contraction
- Curved, directional cooling vanes
- Billet caliper mounting brackets
- Stainless steel braided brake lines
- All necessary mounting hardware for quick, easy bolt-on installation
- Comprehensive fitment and bed-in instructions
- Now Includes Upgraded Powerbrake Pads, PB05 Compound – highest level 4×4 brake pads available – made in Japan
- Manufactured, finished and packaged 100% in South Africa
- REQUIRES 18″ WHEELS FOR ADEQUATE CALIPER CLEARANCE
(7 reviews)$3,850.00 Select options This product has multiple variants. The options may be chosen on the product page -
BrakesFREE SHIPPING
within 48 US StatesPowerbrake X-Line Front Ford F-150 Big Brake Kit 2010-2020 inc. Raptor
2010-2020 Ford F-150 Big Brake Kit Includes:
- X-Line billet 6-piston off-road calipers (pair)
- High-performance brake pads, pre-loaded into the calipers
- 2-Piece 14.6″ x 1.34″ 72-vane discs
- Semi-float disc drive system allows for radial disc expansion and contraction
- Curved, directional cooling vanes
- Billet caliper mounting brackets
- Stainless steel braided brake lines
- All necessary mounting hardware for quick, easy bolt-on installation
- Comprehensive fitment and bed-in instructions
- Suits 2010-2020 Ford F150 including Raptor models
- Now Includes Upgraded Powerbrake Pads, PB05 Compound – highest level 4×4 brake pads available – made in Japan
- Manufactured, finished and packaged 100% in South Africa
- REQUIRES 18″ WHEELS FOR ADEQUATE CALIPER CLEARANCE
(4 reviews)$3,850.00 Select options This product has multiple variants. The options may be chosen on the product page -
BrakesFREE SHIPPING
within 48 US StatesPowerbrake X-Line 4×4 Front Jeep Wrangler Big Brake Kit Stage 1 – 2019+ Sport
2019+ Jeep Wrangler Sport Big Brake Kit Includes:
- X-Line billet 6-piston off-road calipers (pair)
- High-performance brake pads, pre-loaded into the calipers
- 1-Piece 350mm x 34mm (13.77″ x 1.33″) 48-vane discs
- Curved, directional cooling vanes
- Billet caliper mounting brackets
- Stainless steel braided brake lines
- All necessary mounting hardware for quick, easy bolt-on installation
- Comprehensive fitment and bed-in instructions
- SUITS SPORT MODELS – there’s a different kit for Sahara and Rubicon models
- Now Includes Upgraded Powerbrake Pads, PB05 Compound – highest level 4×4 brake pads available – made in Japan
- Manufactured, finished and packaged 100% in South Africa
- REQUIRES AT LEAST 17″ WHEELS FOR ADEQUATE CALIPER CLEARANCE
- Wheel clearance is tricky on Jeeps, as there are so many sizes and offsets. For this reason, use THIS TEMPLATE to make sure you have the proper caliper clearance from the wheel
- These are not some junky brakes you’ll find on Amazon. These are the highest performance brakes sold in the USA for this vehicle
(6 reviews)
