Your cart is currently empty!
Exceptions
Showing 241–270 of 309 results
-
Sale!
SuspensionOn Sale All November!!Dobinsons IMS45-60115 Rear IMS 2.6″ Shocks Pair
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
(8 reviews) -
Sale!
SuspensionOn Sale All November!!Dobinsons IMS45-60114 Front IMS 2.6″ Shocks Pair
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
(8 reviews) -
Sale!300 Series Land Cruiser (2021+)On Sale All November!!
Dobinsons IMS59-60440 2.6″ IFP Front Struts Pair | LC250 LC300
- Suits Toyota Land Cruiser 300 Series 2021+ (not sold in the USA), and is an Extended Travel Option for 2024+ Toyota Land Cruiser 250 Series for 2-3″ of lift
- Adjusters on the shock body are black, not purple
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- 22mm / 7/8″ shaft diameter on front struts
- 624mm extended, 453mm compressed
- Full 2 year limited warranty, no set rebuild time period
- SOLD IN PAIRS
- Note: If installed on a Toyota Land Cruiser 250 Series, a diff drop kit and aftermarket UCA’s must be run to prevent CV bind and coil spring contact at full droop
(8 reviews) -
Sale!SuspensionFREE SHIPPING
within 48 US StatesOn Sale All November!!Dobinsons 3-Way Adjustable MRA Rear Shocks Pair | Jeep Gladiator JT (2-4″ lift)
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Piggyback Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Sold in Pairs
- 732mm extended, 451mm compressed
(14 reviews) -
RecoveryFREE SHIPPING
within 48 US StatesMAXTRAX MKII Olive Drab Recovery Boards
- Equipped with our patented Keyhole, MAXTRAX MKII is compatible with our Mounting Pin Set and Rear Wheel Harness.
- Fiber-reinforced, engineering-grade nylon construction won’t break, crack or stress whiten after use—or we’ll replace it for free
- UV stable material won’t fade or degrade in the sun, they’d know—Maxtrax are based in Sunny Queensland
- Proprietary material resists wheel spin without risking tire damage for non-professional users
- Lifetime warranty against manufacturing faults and workmanship
- Six built-in handles and a shovel on each end make MAXTRAX perfect for use in sand, snow, or mud
- 45L x 13W x 3.5H, 7.5LB (3.4KG) per board, 15LB (6.8KG) per pair
- Made in Australia, from Australian materials
- Includes a LIFETIME warranty against faults in materials and workmanship, along with a set of MAXTRAX Telltale leashes to pull your MAXTRAX out of the muck!
- SOLD IN PAIRS
- Made in multiple different colors, subject to availability
(4 reviews) -
RecoveryFREE SHIPPING
within 48 US StatesMAXTRAX MKII Gunmetal Grey Recovery Boards
- Equipped with our patented Keyhole, MAXTRAX MKII is compatible with our Mounting Pin Set and Rear Wheel Harness.
- Fiber-reinforced, engineering-grade nylon construction won’t break, crack or stress whiten after use—or we’ll replace it for free
- UV stable material won’t fade or degrade in the sun, they’d know—Maxtrax are based in Sunny Queensland
- Proprietary material resists wheel spin without risking tire damage for non-professional users
- Lifetime warranty against manufacturing faults and workmanship
- Six built-in handles and a shovel on each end make MAXTRAX perfect for use in sand, snow, or mud
- 45L x 13W x 3.5H, 7.5LB (3.4KG) per board, 15LB (6.8KG) per pair
- Made in Australia, from Australian materials
- Includes a LIFETIME warranty against faults in materials and workmanship, along with a set of MAXTRAX Telltale leashes to pull your MAXTRAX out of the muck!
- SOLD IN PAIRS
- Made in multiple different colors, subject to availability
(2 reviews) -
RecoveryFREE SHIPPING
within 48 US StatesMAXTRAX MKII Turquoise Recovery Boards
- Equipped with our patented Keyhole, MAXTRAX MKII is compatible with our Mounting Pin Set and Rear Wheel Harness.
- Fiber-reinforced, engineering-grade nylon construction won’t break, crack or stress whiten after use—or we’ll replace it for free
- UV stable material won’t fade or degrade in the sun, they’d know—Maxtrax are based in Sunny Queensland
- Proprietary material resists wheel spin without risking tire damage for non-professional users
- Lifetime warranty against manufacturing faults and workmanship
- Six built-in handles and a shovel on each end make MAXTRAX perfect for use in sand, snow, or mud
- 45L x 13W x 3.5H, 7.5LB (3.4KG) per board, 15LB (6.8KG) per pair
- Made in Australia, from Australian materials
- Includes a LIFETIME warranty against faults in materials and workmanship, along with a set of MAXTRAX Telltale leashes to pull your MAXTRAX out of the muck!
- SOLD IN PAIRS
- Made in multiple different colors, subject to availability
(5 reviews) -
RecoveryFREE SHIPPING
within 48 US StatesMAXTRAX MKII FJ Red Recovery Boards
- Equipped with our patented Keyhole, MAXTRAX MKII is compatible with our Mounting Pin Set and Rear Wheel Harness.
- Fiber-reinforced, engineering-grade nylon construction won’t break, crack or stress whiten after use—or we’ll replace it for free
- UV stable material won’t fade or degrade in the sun, they’d know—Maxtrax are based in Sunny Queensland
- Proprietary material resists wheel spin without risking tire damage for non-professional users
- Lifetime warranty against manufacturing faults and workmanship
- Six built-in handles and a shovel on each end make MAXTRAX perfect for use in sand, snow, or mud
- 45L x 13W x 3.5H, 7.5LB (3.4KG) per board, 15LB (6.8KG) per pair
- Made in Australia, from Australian materials
- Includes a LIFETIME warranty against faults in materials and workmanship, along with a set of MAXTRAX Telltale leashes to pull your MAXTRAX out of the muck!
- SOLD IN PAIRS
- Made in multiple different colors, subject to availability
(5 reviews) -
RecoveryFREE SHIPPING
within 48 US StatesMAXTRAX MKII Pink Recovery Boards
- Equipped with our patented Keyhole, MAXTRAX MKII is compatible with our Mounting Pin Set and Rear Wheel Harness.
- Fiber-reinforced, engineering-grade nylon construction won’t break, crack or stress whiten after use—or we’ll replace it for free
- UV stable material won’t fade or degrade in the sun, they’d know—Maxtrax are based in Sunny Queensland
- Proprietary material resists wheel spin without risking tire damage for non-professional users
- Lifetime warranty against manufacturing faults and workmanship
- Six built-in handles and a shovel on each end make MAXTRAX perfect for use in sand, snow, or mud
- 45L x 13W x 3.5H, 7.5LB (3.4KG) per board, 15LB (6.8KG) per pair
- Made in Australia, from Australian materials
- Includes a LIFETIME warranty against faults in materials and workmanship, along with a set of MAXTRAX Telltale leashes to pull your MAXTRAX out of the muck!
- SOLD IN PAIRS
- Made in multiple different colors, subject to availability
(4 reviews) -
RecoveryFREE SHIPPING
within 48 US StatesMAXTRAX MKII FJ Blue Recovery Boards
- Equipped with our patented Keyhole, MAXTRAX MKII is compatible with our Mounting Pin Set and Rear Wheel Harness.
- Fiber-reinforced, engineering-grade nylon construction won’t break, crack or stress whiten after use—or we’ll replace it for free
- UV stable material won’t fade or degrade in the sun, they’d know—Maxtrax are based in Sunny Queensland
- Proprietary material resists wheel spin without risking tire damage for non-professional users
- Lifetime warranty against manufacturing faults and workmanship
- Six built-in handles and a shovel on each end make MAXTRAX perfect for use in sand, snow, or mud
- 45L x 13W x 3.5H, 7.5LB (3.4KG) per board, 15LB (6.8KG) per pair
- Made in Australia, from Australian materials
- Includes a LIFETIME warranty against faults in materials and workmanship, along with a set of MAXTRAX Telltale leashes to pull your MAXTRAX out of the muck!
- SOLD IN PAIRS
- Made in multiple different colors, subject to availability
(2 reviews) -
RecoveryFREE SHIPPING
within 48 US StatesMAXTRAX MKII Lime Green Recovery Boards
- Equipped with our patented Keyhole, MAXTRAX MKII is compatible with our Mounting Pin Set and Rear Wheel Harness.
- Fiber-reinforced, engineering-grade nylon construction won’t break, crack or stress whiten after use—or we’ll replace it for free
- UV stable material won’t fade or degrade in the sun, they’d know—Maxtrax are based in Sunny Queensland
- Proprietary material resists wheel spin without risking tire damage for non-professional users
- Lifetime warranty against manufacturing faults and workmanship
- Six built-in handles and a shovel on each end make MAXTRAX perfect for use in sand, snow, or mud
- 45L x 13W x 3.5H, 7.5LB (3.4KG) per board, 15LB (6.8KG) per pair
- Made in Australia, from Australian materials
- Includes a LIFETIME warranty against faults in materials and workmanship, along with a set of MAXTRAX Telltale leashes to pull your MAXTRAX out of the muck!
- SOLD IN PAIRS
- Made in multiple different colors, subject to availability
(2 reviews) -
RecoveryFREE SHIPPING
within 48 US StatesMAXTRAX MKII Desert Tan Recovery Boards
- Equipped with our patented Keyhole, MAXTRAX MKII is compatible with our Mounting Pin Set and Rear Wheel Harness.
- Fiber-reinforced, engineering-grade nylon construction won’t break, crack or stress whiten after use—or we’ll replace it for free
- UV stable material won’t fade or degrade in the sun, they’d know—Maxtrax are based in Sunny Queensland
- Proprietary material resists wheel spin without risking tire damage for non-professional users
- Lifetime warranty against manufacturing faults and workmanship
- Six built-in handles and a shovel on each end make MAXTRAX perfect for use in sand, snow, or mud
- 45L x 13W x 3.5H, 7.5LB (3.4KG) per board, 15LB (6.8KG) per pair
- Made in Australia, from Australian materials
- Includes a LIFETIME warranty against faults in materials and workmanship, along with a set of MAXTRAX Telltale leashes to pull your MAXTRAX out of the muck!
- SOLD IN PAIRS
- Made in multiple different colors, subject to availability
(5 reviews) -
RecoveryFREE SHIPPING
within 48 US StatesMAXTRAX MKII Titanium Grey Recovery Boards
- Equipped with our patented Keyhole, MAXTRAX MKII is compatible with our Mounting Pin Set and Rear Wheel Harness.
- Fiber-reinforced, engineering-grade nylon construction won’t break, crack or stress whiten after use—or we’ll replace it for free
- UV stable material won’t fade or degrade in the sun, they’d know—Maxtrax are based in Sunny Queensland
- Proprietary material resists wheel spin without risking tire damage for non-professional users
- Lifetime warranty against manufacturing faults and workmanship
- Six built-in handles and a shovel on each end make MAXTRAX perfect for use in sand, snow, or mud
- 45L x 13W x 3.5H, 7.5LB (3.4KG) per board, 15LB (6.8KG) per pair
- Made in Australia, from Australian materials
- Includes a LIFETIME warranty against faults in materials and workmanship, along with a set of MAXTRAX Telltale leashes to pull your MAXTRAX out of the muck!
- SOLD IN PAIRS
- Made in multiple different colors, subject to availability
(2 reviews) -
RecoveryFREE SHIPPING
within 48 US StatesMAXTRAX MKII Blaze Yellow Recovery Boards
- Equipped with our patented Keyhole, MAXTRAX MKII is compatible with our Mounting Pin Set and Rear Wheel Harness.
- Fiber-reinforced, engineering-grade nylon construction won’t break, crack or stress whiten after use—or we’ll replace it for free
- UV stable material won’t fade or degrade in the sun, they’d know—Maxtrax are based in Sunny Queensland
- Proprietary material resists wheel spin without risking tire damage for non-professional users
- Lifetime warranty against manufacturing faults and workmanship
- Six built-in handles and a shovel on each end make MAXTRAX perfect for use in sand, snow, or mud
- 45L x 13W x 3.5H, 7.5LB (3.4KG) per board, 15LB (6.8KG) per pair
- Made in Australia, from Australian materials
- Includes a LIFETIME warranty against faults in materials and workmanship, along with a set of MAXTRAX Telltale leashes to pull your MAXTRAX out of the muck!
- SOLD IN PAIRS
- Made in multiple different colors, subject to availability
(5 reviews) -
RecoveryFREE SHIPPING
within 48 US StatesMAXTRAX MKII Black Recovery Boards
- Equipped with our patented Keyhole, MAXTRAX MKII is compatible with our Mounting Pin Set and Rear Wheel Harness.
- Fiber-reinforced, engineering-grade nylon construction won’t break, crack or stress whiten after use—or we’ll replace it for free
- UV stable material won’t fade or degrade in the sun, they’d know—Maxtrax are based in Sunny Queensland
- Proprietary material resists wheel spin without risking tire damage for non-professional users
- Lifetime warranty against manufacturing faults and workmanship
- Six built-in handles and a shovel on each end make MAXTRAX perfect for use in sand, snow, or mud
- 45L x 13W x 3.5H, 7.5LB (3.4KG) per board, 15LB (6.8KG) per pair
- Made in Australia, from Australian materials
- Includes a LIFETIME warranty against faults in materials and workmanship, along with a set of MAXTRAX Telltale leashes to pull your MAXTRAX out of the muck!
- SOLD IN PAIRS
- Made in multiple different colors, subject to availability
(3 reviews) -
RecoveryFREE SHIPPING
within 48 US StatesMAXTRAX MKII Signature Orange Recovery Boards
- Equipped with our patented Keyhole, MAXTRAX MKII is compatible with our Mounting Pin Set and Rear Wheel Harness.
- Fiber-reinforced, engineering-grade nylon construction won’t break, crack or stress whiten after use—or we’ll replace it for free
- UV stable material won’t fade or degrade in the sun, they’d know—Maxtrax are based in Sunny Queensland
- Proprietary material resists wheel spin without risking tire damage for non-professional users
- Lifetime warranty against manufacturing faults and workmanship
- Six built-in handles and a shovel on each end make MAXTRAX perfect for use in sand, snow, or mud
- 45L x 13W x 3.5H, 7.5LB (3.4KG) per board, 15LB (6.8KG) per pair
- Made in Australia, from Australian materials
- Includes a LIFETIME warranty against faults in materials and workmanship, along with a set of MAXTRAX Telltale leashes to pull your MAXTRAX out of the muck!
- SOLD IN PAIRS
- Made in multiple different colors, subject to availability
(5 reviews) -
Sale!Montero NM NP NS NT 2000+FREE SHIPPING
within 48 US StatesOn Sale All November!!Dobinsons 3-Way Adjustable MRA Lift Kit | Mitsubishi Montero NM NP NS NT 2000-2019
- All selections are for the 2000-2019 US Spec V6 Gasoline 5-door Wagon models
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Shock Design
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Includes 2 Front Struts, 2 Rear Shocks, and 4 Coil Springs
- Note: Coil seat should be set at 244mm from the center of the lower bushing to the notch in the coil seat, same as original coil seat height. The coils do the lifting. Fine tuning up or down can be done to tune the height or level the vehicle left to right, if required
- Full 2 year limited warranty, no set rebuild time period
(7 reviews) -
Sale!Montero NM NP NS NT 2000+FREE SHIPPING
within 48 US StatesOn Sale All November!!Dobinsons MRA 3-Way Adjustable Rear Shocks Pair | Mitsubishi Montero 2000+
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Universal Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Photos for illustration purposes
(13 reviews) -
Sale!Montero NM NP NS NT 2000+FREE SHIPPING
within 48 US StatesOn Sale All November!!Dobinsons MRA 3-Way Adjustable Front Struts Pair | Mitsubishi Montero 2000+
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Universal Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Does not include coil springs or top mounts – sold separately
- Instructions on setting coil seat height
- Photos for illustration purposes
(17 reviews) -
Sale!DobinsonsFREE SHIPPING
within 48 US StatesOn Sale All November!!Dobinsons MRA59-A710 3-Way Adjustable Front Struts Pair | Sequoia 2008-2022
- Pair of Struts only, no coils included and not preassembled
- If you’re looking for an assembled set of coilovers, those are here: Assembled Coilovers for 2008-2022 Sequoia
- Height adjustable with a fully threaded body
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Requires lower mount clearancing to fit the larger lower leg of the new coilover (see attached photo)
- See attached photo for correct hose routing, can vary depending on UCA’s used
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- SOLD IN PAIRS
- Full 2 year limited warranty, no set rebuild time period
- Does not include coil springs – sold separately
- Front coilover assembly instructions
- New UCA’s are required for proper coilover and hose clearance, see all options
- Aftermarket wheels with +18 Offset or less REQUIRED to avoid reservoir + hose rubbing at full lock
- Link to recommended 16″ coils with a 3″ inner diameter and 650LB Spring Rate
- Link to add assembly labor charge, so that when you buy these struts and the coils, you can have them preassembled before shipping
(15 reviews) -
Sale!Shocks + Struts - Sequoia 3rd GenFREE SHIPPING
within 48 US StatesOn Sale All November!!Dobinsons 3.0-4.0″ 3-Way Adjustable MRA Coilovers for Toyota Sequoia 2023+
- Suits Toyota Sequoia 2023-2024+ Models
- TRD Pro Models yield 1″ less lift than listed here, as they are already lifted taller than base models
- Sold as a Pair, ready to bolt in
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- Looking for a quick and easy way to lift your Sequoia? This is your answer
- Select your desired lift height and tell us your weight – we’ll take care of the rest!!
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- SOLD IN PAIRS
- Full 2 year limited warranty, no set rebuild time period
- Must mount the banjo fitting and hose inwards on MRA struts
- Coil seat for MRA59-A446 will be set at 175mm (6.87″) from the strut bushing eye
- Photos for illustration purposes
- Instructions for setting and adjusting coil seat height
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle. Adding 2.5″ or more lift, new UCA’s should be added for proper articulation and correct wheel alignment
- If doing a 4″ lift in the front, a diff-drop kit or longer TRD CV-axles are REQUIRED, failure to complete these requirements could cause OE CV-axle failure
- TRD axle shafts: PT362-3432B and PT362-3431B
- Front Installation Instructions
- Link to Matching rear shocks
- A Diff Drop Kit should be run with 4″ of lift
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
(7 reviews) -
Sale!Full Suspension Kits - XterraFREE SHIPPING
within 48 US StatesOn Sale All November!!Dobinsons 1.5″ Lift MRA Coilovers 3-Way Adjustable – Nissan Xterra 05+
- Remote Resi Coilovers Suit Nissan Xterra 4×4 Models (2005-2015) – lifts 1.5″
- Looking for a quick and easy way to lift your Xterra? This is your answer
- Dobinsons MRA are height adjustable by a fully threaded body
- The Dobinsons MRA Coilovers will come pre-assembled with new struts, coils and top mounts
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Reservoir Bracket and Hardware, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Length specs – 395mm extended, 266mm compressed
- Photos for illustration purposes
- FITTING INSTRUCTIONS
- Instructions for setting coil seat height
- Link to the matching rear shocks
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
(2 reviews) -
Sale!Full Suspension Kits - Frontier D41FREE SHIPPING
within 48 US StatesOn Sale All November!!Dobinsons MRA Extended Travel Coilovers 3-Way Adjustable | Frontier D41 2022+
- Extended Travel Coilovers Suit Nissan Frontier D41 4×4 Models 2022-2023+ – lifts 2-3″ depending on selections made below
- These extended travel struts REQUIRE aftermarket UCA’s for full travel, like Dobinsons
- Looking for a quick and easy way to lift your Frontier? This is your answer
- Dobinsons MRA are height adjustable by a fully threaded body
- The Dobinsons MRA Coilovers will come pre-assembled with new struts, coils and top mounts
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Reservoir Bracket and Hardware, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Length specs – 278mm compressed and 410mm extended
- Photos for illustration purposes
- FITTING INSTRUCTIONS
- Instructions for setting coil seat height
- Link to the matching rear shocks
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
(6 reviews) -
Sale!DobinsonsOn Sale All November!!
Dobinsons IMS57-50618 2.2″ IMS Shocks Pair | Suzuki Jimny Rear Shocks
- Suits Suzuki Jimny 1998-2017 and 2018+
- SOLD IN PAIRS
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
(8 reviews) -
Sale!DobinsonsOn Sale All November!!
Dobinsons IMS57-50617 2.2″ IMS Shocks Pair | Suzuki Jimny Front Shocks
- Suits Suzuki Jimny 1998-2017 and 2018+
- SOLD IN PAIRS
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
(8 reviews) -
Sale!Full Suspension Kits - Bronco 2021+On Sale All November!!
Dobinsons IMS Ford Bronco Suspension Kit 4 DOOR
- Suits 4 DOOR Ford Bronco 2021-2023 Models (will not fit Bronco Sport)
- Complete suspension kit with multiple coil spring options to suit the vehicle as well as the added weight
- (The 2 Door Bronco Kit is on a different page)
- Note: Photo is not of actual IMS struts. Ford Bronco IMS have a crossbar style lower front shock bush
- Front Springs Provide Approximately 3″-4″ Lift Above Non Sasquatch Models & 2″-3″ Lift Above Sasquatch Models.
- Rear Springs Provide Approximately 3″ Lift Above Non Sasquatch Models & 2″ Lift Above Sasquatch Models.
- Dobinsons IMS shocks and struts are fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Standard coil seat height should be set to 243mm (9.55″) front and rear. See instructions on setting coil seat height on left
- Reuse OE strut top mounts
- Select the coil springs that match the Bronco version you have as well as the added weight you have put on it, if any
(7 reviews) -
Sale!Full Suspension Kits - Bronco 2021+On Sale All November!!
Dobinsons IMS Ford Bronco Suspension Kit 2 DOOR
- Suits 2 DOOR Ford Bronco 2021-2023 Models (will not fit Bronco Sport)
- Complete suspension kit with multiple coil spring options to suit the vehicle as well as the added weight
- (The 4 Door Suspension Kit is on a different page)
- Note: Photo is not of actual IMS struts. Ford Bronco IMS have a crossbar style lower front shock bush
- Front Springs Provide Approximately 3″-4″ Lift Above Non Sasquatch Models & 2″-3″ Lift Above Sasquatch Models.
- Rear Springs Provide Approximately 3″ Lift Above Non Sasquatch Models & 2″ Lift Above Sasquatch Models.
- Dobinsons IMS shocks and struts are fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Standard coil seat height should be set to 243mm (9.55″) front and rear. See instructions on setting coil seat height on left
- Reuse OE strut top mounts
- Select the coil springs that match the Bronco version you have as well as the added weight you have put on it, if any
(8 reviews) -
Sale!Shocks + Coilovers - Bronco 2021+On Sale All November!!
Dobinsons IMS Monotube 2.2″ IFP Rear Struts Pair | Ford Bronco 2021+
- IMS rear struts for Ford Bronco 2021-2023 Models (will not fit Bronco Sport)
- SOLD IN PAIRS
- Note: Photo is not of actual IMS struts. Ford Bronco IMS have a crossbar style lower front shock bush
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Standard coil seat height should be set to 243mm (9.55″). See instructions on setting coil seat height on left
- Reuse OE strut top mount
(8 reviews) -
Sale!Shocks + Coilovers - Bronco 2021+On Sale All November!!
Dobinsons IMS Monotube 2.2″ IFP Front Struts Pair | Ford Bronco 2021+
- IMS front struts for Ford Bronco 2021-2023 Models (will not fit Bronco Sport)
- SOLD IN PAIRS
- Note: Photo is not of actual IMS struts. Ford Bronco IMS have a crossbar style lower front shock bush
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Standard coil seat height should be set to 243mm (9.55″). See instructions on setting coil seat height on left
- Reuse OE strut top mount
(8 reviews)
