Your cart is currently empty!
Ranger 2019+ (US Spec)
Showing 1–30 of 45 resultsSorted by popularity
-
Full Suspension Kits - Ranger (3)
-
Struts + Shocks - Ranger (2)
-
Coil Springs - Ranger (4)
-
Upper Control Arms - Ranger (2)
-
Bed Racks - Ranger (9)
-
Fuel Tanks - Ranger (2)
-
Leaf Springs - Ranger (9)
-
Performance Upgrades - Ranger (6)
-
Wheels - Ranger (8)
-
Dobinsons
Dobinsons Greasable Bolt Pair | Ford Nissan and Toyota (SP59-060)
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Kit includes 2 greasable bolts, as shown in the photo
- Order 2 kits if you want to replace fixed and shackle end bolts
- Suits Toyota Tundra and Tacoma as well as Nissan Frontier D40 and D41, Ranger 2019+. See full vehicle list below
(12 reviews) -
Tacoma 3rd Gen (2016-2023)
Dobinsons UB59-453-2K Rear U-Bolts for Toyota Ford Nissan Trucks (2 Pairs)
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Includes 4 U-bolts, enough for 1 vehicle
- Requires 2″ lift leaf springs to ensure proper fitment
- Suits Toyota Tacoma 1998-2023 (all springs) and Nissan Frontier D40 and D41 2005-2022+ (heavy duty leaf springs), Ford Ranger 2019+
- Photos for illustration purposes. These are square at the top
- These U-bolts are 180mm in length. If you need longer, you can use the Tundra U-bolts which are 30mm longer (210mm overall), UB59-437K
(10 reviews) -
Bump Stops & SpacersFREE SHIPPING
within 48 US StatesDobinsons BS59-560 Front Adjustable Bump Stop Pair
- Adjustable front soft hit bump stop made from high quality rubber
- Suits 0-30mm Extension
- The BS59-560 rubber only is 1-3/8″ (35mm) thick, and the included spacers are 5, 10, 20mm
- Sold as a pair, replacing two front bump stops
- Ideal for those who bottom out often in their offroad driving
- Suits Tacoma, 4Runner, GX470, GX460, 200 Series & more (see below for full vehicle list)
- Installation Instructions
(10 reviews) -
Ranger 2019+ (US Spec)
Dobinsons Front Sway Bar Link Set | Ford Ranger USA Model 2019-2023
- For Ford Ranger 2019-2023 USA Spec models
- Use with Dobinsons lift heights of 1.75″ or more
- Black with all hardware supplied
- Simple bolt-on design
- Fixed length, 290mm (11.42″) from center to center of ball joints
- Reduces bushing wear and corrects sway bar angle to function properly
- Prevents sway bar from contacting where it shouldn’t when running longer travel struts, like Dobinsons
- Sold as a pair, 1 needed per vehicle
(3 reviews) -
Ranger 2019+ (US Spec)
Ford Ranger Long Range Replacement Fuel Tank 2019-2023 – 37 Gallons
- Suits Ford Ranger 2019-2023 models with any engine option, but will NOT suit the Raptor version
- A Raptor-specific version is in the works for later in 2024
- Designed and test fitted around a 4×4 model, but there shouldn’t be any issue with a 2WD since they share the same platform
- This is a replacement tank that replaces your OE fuel tank, it holds 37 gallons instead of the stock 18 gallons and fills the same way an OE tank fills
- Adds a massive 105% more fuel than stock!!
- Go from an average 250 mile range to over 500 miles!!! Great for people who live in remote areas, or like to go more than 4 hours before filling up
- 37 gallon capacity, replaces the original 18 gallon tank
- Tank fills using OEM gas door
- No Exhaust modification required
- Sits about 1.5″ lower than the OEM tank
- Distance To Empty Feature can be recalibrated with the use of FORSCAN software, this will be a customer sourced option.
- Fitting time – approximately 4-5 hours by a professional
- Installation instructions
- This item ships on a pallet to the nearest Truck Freight terminal for you to pickup. We will be in touch with you regarding the nearest freight terminal, unless you add home delivery below
- Part Number: FRDCPYR-US
- This product can not be sold or shipped to residents in California due to SMOG rules. Do not order this product if you live in California!!
- MADE IN AUSTRALIA
(9 reviews) -
Ranger 2019+ (US Spec)
Dobinsons Rear Greasable Poly Bush Kit | Ford Ranger 2019-2023
- Suits Ford Ranger 2019-2023
- For any lift height, or no lift. These are OE replacement bushings
- Use with Dobinsons Leaf Springs or any other brand that can accept OE-size bushings
- Pressing of OE bushings may be necessary during removal and installation
- Replaces OE bushings in all 6 positions of rear leaf springs
- Photo for illustration purposes
(6 reviews) -
WheelsFREE SHIPPING
within 48 US StatesWarn 104488 Diamond Cutter Wheel – 17×8.5″ 6×5.5″ 0 Offset – Gun Metal
- Warn wheels made specifically for 6 Lug 2021+ Ford Bronco, 2019+ Ford Ranger, FJ Cruiser, 2005-2023 Toyota Tacoma, and 2003-2023 Toyota 4Runner, Lexus GX470 and GX460
- 17×8.5″ wheel with 0 Offset, 4.75″ backspacing, 6 lugs, Uses OEM lug nuts
- Sold Individually
- Gun Metal Finish
- 1 Piece Cast Aluminum Construction
- Compatible With TPMS (Tire Pressure Monitoring System)
- With Warn Logo Center Cap
- Limited Lifetime Structural Warranty
- Bolt Pattern Inch: Not Applicable
- Bolt Pattern Millimeter: Not Applicable
- Weight: 30 LBS
- Diameter: 17
- Width: 8.5
- Offset: 0
- Backspacing: 4.75
- Material: Aluminum
- Finish: Painted
- Color: Gun Metal
- Bolt Pattern Inch: 6×5.50
- Bolt Pattern Inch: Not Applicable
- Bolt Pattern Millimeter: 6×139.7
- Bolt Pattern Millimeter: Not Applicable
- Lug Nut Seat Type: 60 Degree Conical
- Center Cap: See Replacement Items
- Center Bore: 106.10
- Lug Nut Design: Acorn
- Compatible With TPMS (Tire Pressure Monitoring Sys: Yes
- Basic Design: 6 Spoke
- With Inserts: No
- Load Capacity: 2500
- Size: 17×8.5
- Max Tire Diameter: 40
- Center Cap Design: Warn Logo
- Structural Warranty: Lifetime
- Quantity: Single
- Construction: One Piece Cast
- With Hub Centric Ring: Yes
- Estimated Install Time (Hours): 0.5
- Prop 65 WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- This item is not returnable – any product damage must be reported to the shipping carrier within 48 hours of receipt.
(6 reviews) -
Roof Racks
RCI 12″ HD Low Profile Truck Bed Rack
- For Short Bed Trucks from 46-58″ in Bed Length
- For Trucks Such As: Jeep Gladiator, Toyota Tacoma, Nissan Frontier, Ford Ranger, Chevy Colorado, GMC Canyon, Ford F150, Toyota Tundra, etc
- Rack is 12″ tall from bed rail to top of rack
- Mount anything from lights, Hi-lift, co2, fire extinguisher, quick-fist, roto-pax, spare tire, roof top tent, etc
- This is our HD model, utilizing three cross-members spanning the truck bed, this rack is has the highest weight capacity and provides even weight distribution on the trucks bed side rails
- Built in mounting points allow unlimited options for adding accessories
- Bolts to inside of bed rails or can alternatively be mounted with optional “drill-free” clamps to mount like a truck topper (Not applicable when bolting to accessory rail systems)
- Rack is 12″ tall from bed rail to top of rack
- Adjustable width adapts to any truck bed from 54″ – 64″ width between the bed rails
- Three length options to fit any application from 5′ beds to 6’+
- Maintains very good visibility through the back window despite the low overall rack height
- Using this rack will minimize the aerodynamic drag normally associated with roof top tents by keeping it largely below the roof-line
- Slotted mounting points on top of rack accept nearly any roof top tent making mounting a breeze
- Includes TWO top braces, for unlimited accessory and tent mounting options
- Heavy duty black textured powder coat finish comes standard, plus we take it a step further and coat all racks with an epoxy primer. This extra step is expensive and time consuming but ensures our paint job will outlast anything else in the industry!
- Easy bolt together assembly, takes about 45 minutes to install with only a few basic hand tools
- All hardware for installation is included
- Weights
- 5ft (46″) 86lbs
- 5ft6in(52″) 92lbs
- 6ft(58″) 96lbs
- Adjustable Bedrack Install Guide
- Made in Loveland, Colorado USA
(2 reviews) -
Ranger 2019+ (US Spec)
Dobinsons L19-132-R Leaf Springs Pair | Ford Ranger 2019+ USA Spec (40mm w/600LBS)
- Suits USA Spec Ford Ranger 2019-2022+
- L19-132-R lift 40mm (1.6″) over stock height with 600LBS of added constant weight – lifts more with less weight
- Pack has 7 leaves
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- These are leaf springs ONLY and don’t come with bushings or any other parts. Scroll down for add-ons that go with these springs
- Photo for illustration purposes only, not of actual part number
(5 reviews) -
Ranger 2019+ (US Spec)
Dobinsons SK19-058 Greasable Shackle Kit Pair | Ford Ranger 2019-2023 USA Spec
- Suits Ford Ranger 2019-2023 USA Spec
- Recessed twin hole greasable design
- Reduces friction in bushes, creating a more comfortable ride
- Heavy duty design and provide simple service through external grease nipples
- Sold as a pair to replace the original shackles
- Incredibly tough and durable gold zinc plating
- Photo for illustration purposes
(5 reviews) -
Sale!Roof RacksFREE SHIPPING
within 48 US StatesOVS Cab Height Mid Size Short Bed Truck Discovery Rack
- For Short Bed Trucks Up To 5.5FT in Length with Tie Down Bed Rails
- For Trucks Such As: Jeep Gladiator, Toyota Tacoma, Nissan Frontier D21 & D40, Ford Ranger, Chevy Colorado, GMC Canyon, etc
- Heavy Duty 2” Square Top Rails are Adjustable
- No Holes to Drill Installation
- Multiple Tie Down Points
- Full Length Rails with Integrated Tie Downs
- Removable Shelf to Store Items like Propane Bottle, CO2 Tanks, Air Compressors, etc.
- Side Mounting Plates with Integrated Mole Mounting Holes to Mount Gas Cans, Water Cans, Jacks, Recovery Ramps, etc.
- Easily Mount Roof Top Tents and Awnings
- Crossbar Length 51.25”
- Accessory Plate Length 41”
- Overall Length 57”
- Overall Height 33”
- Marine Grade Stainless Steel Hardware
- 2 Stage Black Powder Coat
- T-Slot Bars are 4 Sided
- Heavy Duty Welded Corners
- Dynamic Weight Capacity: 450lbs
- Static Weight Capacity: 1350lbs
- Brand: Overland Vehicle Systems
- Limited Lifetime structural warranty and five-year finish warranty
- Installation Instructions
(8 reviews) -
Ranger 2019+ (US Spec)
Dobinsons L19-133-R Leaf Springs Pair | Ford Ranger 2019+ USA Spec (40mm w/1100LBS)
- Suits USA Spec Ford Ranger 2019-2022+
- L19-133-R lift 40mm (1.6″) over stock height with 1100LBS of added constant weight – lifts more with less weight – only run with a super heavy constant rear load!!
- Pack has 8 leaves
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- These are leaf springs ONLY and don’t come with bushings or any other parts. Scroll down for add-ons that go with these springs
- This thick leaf pack requires THESE u-bolts, longer than the normal ubolts for the other lighter leaf packs. They are the longer version of the UB59-453-2K
- Photo for illustration purposes only, not of actual part number
(4 reviews) -
Ranger 2019+ (US Spec)FREE SHIPPING
within 48 US StatesDobinsons Front UCA’s Pair | Ford Ranger USA Spec 2019-2023
- Suits Ford Ranger 2019+ with Steel Knuckles Only
- Complete kit for both left and right hand side, includes new ball joints (installed), OE style rubber frame bushings (installed), and washers
- Has 3 degrees of caster built in, no adjustability or settings required
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Works for any lift height of 1.5″ or more. Any height less than that, a proper wheel alignment may not be able to be achieved
- Uses replaceable OE style ball joints, fully sealed for maintenance free life
- Will not work on Aluminum Knuckles!!!
- Product Video
- Installation Instructions
- Images for illustration and detail purposes
(4 reviews) -
Ranger 2019+ (US Spec)
Dobinsons C19-534 Front Coils for Ford Ranger USA Spec – 1.75″ Heavy Load – Pair
- Suits 2019-2022 Ford Ranger USA Spec – lifts 1.75″ with 150-220LBS added weight
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Sold in Pairs
- Photo shows how they would look when installed on the IMS19-50096 Struts
(6 reviews) -
Ranger 2019+ (US Spec)
Dobinsons C19-532 Front Coils for Ford Ranger USA Spec – 1.75″ – Pair
- Suits 2019-2022 Ford Ranger USA Spec – lifts 1.75″ with stock weight
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Sold in Pairs
- Each pair of coils lift 1.75″ over stock height
- Photo shows how they would look when installed on the IMS19-50096 Struts
(5 reviews) -
Rear DrawersFREE SHIPPING
within 48 US StatesOVS Slide Out Bed Extension for 5.0FT Short Bed Trucks
- Suits 5.0FT Short Bed Mid-Size Trucks
- Mid Size Short Bed 5.0′: 57.08″ long x 42.12″ wide x 7.28″ tall
- Potential Vehicle Fitments (Measure your truck bed first!!): Tacoma, Frontier, Gladiator, Ranger, Hilux, Colorado
- These are made in 3 different sizes. Mid-Size Truck 5.0Ft Long, Full Size Truck 5.5FT Long and Full Size Truck 6.5FT Long
- 75% Extension Bed Cargo Slide
- 1250 LBS. Max Load Capacity
- Steel Frame Construction
- 304 Stainless Steel Hardware
- Single Pull Latch for Easy Operation
- Multiple Anchor Points for Cargo Security
- Great for camping, easily slide out all your gear
- Excellent for work use, keep your tools and heavy objects organized, then slide them out easily to reach them
- Perfect for people with truck caps or canopies, easier to reach the parts out of the truck
- Some photos show the different sized models
(0 reviews) -
Fuel Tanks - RangerETA is FEB 2025
Ford Ranger Raptor Fuel Tank Long Range 35 Gallon Replacement 2023+
- Suits Ford Ranger Raptor 2023+ models with any engine option
- Designed and test fitted around a 4×4 Raptor model USA Model with gasoline engine
- Will not fit International version Ford Ranger Raptors, only the USA version
- This is a replacement tank that replaces your OE fuel tank, it holds 35 gallons instead of the stock 20.3 gallons and fills the same way an OE tank fills
- Adds a massive 58% more fuel than stock!!
- Go from an average 200 mile range to over 400 miles!!! Great for people who live in remote areas, or like to go more than 4 hours before filling up
- 35 gallon capacity, replaces the original 20.3 gallon tank
- Tank fills using OEM gas door
- No Exhaust modification required
- Sits about 1.5″ lower than the OEM tank
- Distance To Empty Feature can be recalibrated with the use of FORSCAN software, this will be a customer sourced option.
- Fitting time – approximately 6 hours by a professional
- This item ships on a pallet to the nearest Truck Freight terminal for you to pickup. We will be in touch with you regarding the nearest freight terminal, unless you add home delivery below
- Part Number: FPYRRR
- This product can not be sold or shipped to residents in California due to SMOG rules. Do not order this product if you live in California!!
- Dry weight is 85 LBS
- MADE IN AUSTRALIA
- If you have a standard non-Raptor version, this other tank may suit you
(0 reviews) -
Sale!Overland Vehicle Systems (OVS)FREE SHIPPING
within 48 US StatesLD TACT Truck Bed Tent – Mid-Size Truck 5.0FT Bed
- For Mid-Size Truck Beds measuring 5.0-5.2 FT in length
- For Vehicles such as Chevy Colorado, Ford Ranger, GMC Canyon, Nissan Frontier, Toyota Tacoma
- 2-3 Person Design with Spacious Interior and Headroom
- Perimeter Skirt and Reinforced Floor Keeps Truck Bed Dry
- Color Coated Poles for Quick Deployment
- Large Windows with Mesh Allows for Ventilation
- Premium 420D Material with Removable Rainfly
- Padded Elastic Anchor Points for Easy Scratch-Free Fit
- Compact Carrying Bag is Included
- Internal Storage Options
- Setup Instructions
- This truck bed tent style is made in 3 sizes, 5FT, 5.5FT and 6.0FT Truck Beds
(3 reviews) -
RCV AxlesFREE SHIPPING
within 48 US StatesRCV Ultimate IFS CV Axle Set | Ford Ranger 2018-2023
- Suits Ford Ranger 2018-2023 and Ford Ranger T6 2011+
- Standard length for use on lifted and non-lifted applications
- RCV Ultimate IFS CV Axles for Independent Front Suspension are designed to overcome the limitations of the Ford Ranger IFS axle shafts
- Ultimate IFS CV Axles provide increased strength that original equipment axle shafts just can’t match
- Even if you have big tires and big power there are no worries
- Ultimate IFS CV Axles are low maintenance, and are backed with a “No Questions Asked” limited lifetime warranty against breakage!!
- Warranty Form
- Our IFS CV axles meet and exceed the strength of a straight axle swap, while allowing you to maintain the traction, smoothness and control of your IFS
- The axles feature a double-offset inboard CV joint that is comprised by 4340 internal components
- The outboard CVs utilize our Dana 60 architecture with combination of 4340 & 300M components optimized for maximum strength
- The center bar is 30 spline 4340 Chromoly, the strongest in the industry
- The RCV developed moly SPEC grease is used in the CVs to control heat build-up in even the most extreme use environments
- Black oxide coating is standard
- Sold as a pair
- Made in the USA
(9 reviews) -
Roof Racks
RCI Low-Pro Truck Bed Bars
- Super low profile (low pro) bed rack set to mount all sort of gear or a Roof Top Tent
- For Trucks Such As: Jeep Gladiator, Toyota Tacoma, Nissan Frontier, Ford Ranger, Chevy Colorado, GMC Canyon, Ford F150, Toyota Tundra, etc
- Utilizing 2 crossmembers spanning the truck bed, these bed bars have a high weight capacity and provide even weight distribution on the trucks bed side rails
- Bolts to inside of bed rails or can alternatively be mounted with optional “drill-free” clamps to mount like a truck topper (Not applicable when bolting to accessory rail systems)
- Bars are 3.5″ tall from bed rail to top of bars
- Adjustable width adapts to any truck bed from 54″- 69″ width between the bed rails
- Can be positioned up to 58″ apart (front to back)
- Using these bars will minimize the aerodynamic drag normally associated with roof top tents by keeping it below the roof-line
- Slotted mounting points on top of rack accept nearly any roof top tent making mounting a breeze
- Heavy duty black textured powder coat finish comes standard, plus we take it a step further and coat all racks with an epoxy primer. This extra step is expensive and time consuming but ensures our paint job will outlast anything else in the industry!
- Easy bolt together assembly, takes about 15 minutes to install with only a few basic hand tools
- All hardware for installation is included
- INSTALL GUIDE
- Made in Loveland, Colorado USA
(5 reviews) -
Truck Caps + Canopies
MagPak Ranger Camper Shell + Roof Top Tent Combo | Ford Ranger 2019-2024 5FT Bed
- Specifically suits 2019-2024 Ford Ranger with the 5FT Bed length
- Pre-Production model shown in all photos and videos
- Check out the walk-around video down below in the description
- Integrated Roof Top Tent: Access the tent from inside the bed area
- Comfy Mattress: 2.5″ thick high density foam mattress
- Retractable Sleeping Area: Lift up the sleeping area to be able to stand up inside the camper for extra room during bad weather, to change clothes, or whatever you’d like
- Tough Fabrics: Premium 320G rip stop material construction of the tent
- Integrated LED Light Package: Strategically placed LED lights provide an inviting and functional glow
- No Drill Installation: Say goodbye to complex installations. Our no-drill installation process is hassle-free and preserves your truck’s integrity. You can have your camper ready for action in no time.
- Marine-Grade Stainless Construction: Engineered to withstand the harshest conditions, our camper is built to last. Crafted from aircraft-grade aluminum, it ensures longevity and corrosion resistance, ready to tackle any terrain.
- Textured Powder Coat Finish: The tough, textured powder coat finish not only adds a striking aesthetic but also provides extra protection against the elements, making your camper look great season after season.
- True Fit Technology: Say goodbye to the hassle of ill-fitting campers. Our True Fit Technology ensures a seamless and secure fit, giving your truck a sleek, integrated appearance.
- Waterproof Seals: Rain or shine, your cargo stays dry. Our camper features waterproof seals that create an impenetrable barrier against moisture, so you can venture into the unknown with confidence.
- Heavy-Duty Latches: Robust and dependable, our heavy-duty latches keep your camper securely closed, providing peace of mind whether you’re on or off the beaten path.
- Solid Hinges: Designed for longevity and strength, our solid hinges allow for smooth and reliable opening and closing of the camper, even after years of use.
- Tempered Glass: Safety is paramount. Our camper comes with Tempered glass, ensuring clear visibility and compliance with all safety standards.
- 3rd Brake Light: Added safety features for your peace of mind. The integrated third brake light enhances visibility, keeping you and those around you safe.
- High-Pressure Struts: Our camper boasts high-pressure struts, making it easy to access your gear while providing consistent and reliable support.
- 4 Year Warranty: We stand behind our product’s quality. Enjoy peace of mind with a 4 year warranty, ensuring your camper will be by your side for all your future journeys.
- Shipping Weight: 450 LBS
- Shipping Measurements: 120 x 70 x 42″
- Ships from the fulfillment warehouse on a pallet by LTL Freight, the freight line will be in touch with you to setup a delivery appointment
- We strongly recommend you keep the shipping insurance on your order during checkout, in case of any damage in transit, it will be covered
(3 reviews) -
Ranger 2019+ (US Spec)
Expedition Truck Cap with Full Wing Doors | Ford Ranger 2019-2023
- Specifically suits 2019-2023 Ford Ranger Trucks with the 5FT Bed length
- No Drill Installation: Say goodbye to complex installations. Our no-drill installation process is hassle-free and preserves your truck’s integrity. You can have your topper ready for action in no time.
- Marine-Grade Stainless Construction: Engineered to withstand the harshest conditions, our topper is built to last. Crafted from marine-grade stainless steel, it ensures longevity and corrosion resistance, ready to tackle any terrain.
- Textured Powder Coat Finish: The tough, textured powder coat finish not only adds a striking aesthetic but also provides extra protection against the elements, making your topper look great season after season.
- True Fit Technology: Say goodbye to the hassle of ill-fitting toppers. Our True Fit Technology ensures a seamless and secure fit, giving your truck a sleek, integrated appearance.
- Built-In Air Vent: Stay comfortable on the go with our integrated air vent. It ensures proper ventilation inside the topper, keeping your gear and equipment in optimal condition.
- Waterproof Seals: Rain or shine, your cargo stays dry. Our topper features waterproof seals that create an impenetrable barrier against moisture, so you can venture into the unknown with confidence.
- Heavy-Duty Latches: Robust and dependable, our heavy-duty latches keep your topper securely closed, providing peace of mind whether you’re on or off the beaten path.
- Solid Hinges: Designed for longevity and strength, our solid hinges allow for smooth and reliable opening and closing of the topper, even after years of use.
- Tempered Glass: Safety is paramount. Our topper comes with Tempered glass, ensuring clear visibility and compliance with all safety standards.
- 3rd Brake Light: Added safety features for your peace of mind. The integrated third brake light enhances visibility, keeping you and those around you safe.
- High-Pressure Struts: Our topper boasts high-pressure struts, making it easy to access your gear while providing consistent and reliable support.
- Modular Construction: Customize your topper to fit your needs. Our modular construction allows you to add or remove components easily, adapting to various adventures.
- Lifetime Warranty: We stand behind our product’s quality. Enjoy peace of mind with a lifetime warranty, ensuring your topper will be by your side for all your future journeys.
- Roof Rails and Crossbars: Take your adventures to the next level with our built-in roof rails and optional crossbars. They provide ample space to carry additional gear, bikes, kayaks, and more, allowing you to maximize your outdoor experiences.
- Dry Weight: 230 LBS
- Dynamic Weight Capacity: 325 LBS
- Static Weight Capacity: 750 LBS
- Measurements: 62 x 54 x 28″
- Ships from the fulfillment warehouse on a pallet by LTL Freight, the freight line will be in touch with you to setup a delivery appointment
- We strongly recommend you keep the shipping insurance on your order during checkout, in case of any damage in transit, it will be covered
(3 reviews) -
Bump Stops & SpacersFREE SHIPPING
within 48 US StatesDobinsons 2.2″ Hydraulic Bump Stop IFS Weld on Mount Kit
- Kit includes front Weld on Mounts (Pair) and Dobinsons HBS56-009 Pair of Hydro Bump Stops
- Made for IFS (independent front suspension) vehicles to replace the OEM rubber bump stop
- HBS56-009 – 56mm (2.2″) body | 46mm (1.8″) stroke | 188mm (7.4″) extended | 142mm (5.6″) compressed | 105mm (4.0″) thread length
- CNC Machined 50mm Billet Aluminum Piston
- EDP Coated 3mm Thick 56mm Steel Body
- Threaded Body For Height Adjustment
- Supplied with both Interchangeable Super Quiet Rubber Rod End & Hard Nylon
- 30mm Micro Polished Hard Chrome Shaft
- Slow Rebound Valving To Prevent Bucking
- Removable Dust Cover Boot For Stealth Appearance
- Fully Rebuildable & Tunable
- O-Ring Travel Indicator
- Heavy Duty Extreme-Race style Triple Seal Design
- Nitrogen Gas Charged & Tunable (100 to 300 PSI)
- Pre-charged to 150 PSI
- Extra Short Dead Lengths For Compact Fitment
- Universal design threaded weld on bump stop can to hold the 2.2″ body bump stop
- Cans have 3mm walls for increased strength
- Kit is ideal for those who bottom out often in their offroad driving or go really hard at high speeds
- Could suit a wide range of vehicles as listed below, but remember they are universal and will require adaptation to your vehicle and welding
- Custom fitting and welding is required
- Photo attached shows these bump stops installed with the weld-on mounts on a 3rd Gen Tacoma
(0 reviews) -
Bump Stops & Spacers
Dobinsons 2.2″ Hydraulic Bump Stop IFS Weld on Mounts
- Universal design threaded weld on bump stop can to hold a 2.2″ body bump stop
- Intended to be used with the Dobinsons HBS59-009 Hydro bumps
- 3mm walls for increased strength
- Sold as a pair
- Ideal for those who bottom out often in their offroad driving or go really hard at high speeds
- Could suit a wide range of vehicles as listed below, but remember they are universal and will require adaptation to your vehicle and welding
- Custom fitting and welding is required
(6 reviews) -
Roof Racks
RCI 18″ HD Truck Bed Rack
- For Short Bed Trucks from 46-58″ in Bed Length
- For Trucks Such As: Jeep Gladiator, Toyota Tacoma, Nissan Frontier, Ford Ranger, Chevy Colorado, GMC Canyon, Ford F150, Toyota Tundra, etc
- Mount anything from lights, Hi-lift, CO2 tank, fire extinguisher, quick-fist, roto-pax, spare tire, roof top tent, bike mounts, roof baskets, etc
- This is our HD model, utilizing three cross-members spanning the truck bed, this rack is has the highest weight capacity and provides even weight distribution on the trucks bed side rails
- Built in mounting points allow unlimited options for adding accessories
- Bolts to inside of bed rails or can alternatively be mounted with optional “drill-free” clamps *Many Toyota and Jeep models can be bolted directly to accessory bed rails
- Rack is 18″ tall from bed rail to top of rack
- Maintains complete visibility through the back window of most trucks due to its added height
- Slotted mounting points on top of rack accept nearly any roof top tent, allowing tent to be bolted on in a matter of minutes
- Adjustable width adapts to any truck bed from 56.5″ – 64″ width between the bed rails
- Tall enough to fit up to a 35″ spare tire in the bed of a Tacoma, with even more room on full size pickups
- Includes TWO top braces for unlimited accessory and tent mounting options
- Heavy duty black textured powdercoat finish comes standard, plus we take it a step further and coat all racks with an epoxy primer for an exponentially more durable finish
- Easy bolt together assembly, takes about 45 minutes to install
- All hardware and installation instructions provided
- Adjustable Bedrack Install Guide
- Made in Loveland, Colorado USA
(4 reviews) -
Roof Racks
RCI 12″ High HD Aluminum Truck Bed Rack
- For Short Bed Trucks from 46-58″ in Bed Length
- For Trucks Such As: Jeep Gladiator, Toyota Tacoma, Nissan Frontier, Ford Ranger, Chevy Colorado, GMC Canyon, Ford F150, Toyota Tundra, etc
- Rack is 12″ tall from bed rail to top of rack
- Low Profile design keeps a roof top tent lower than the roof line for better aerodynamics
- Weighs only 68 lbs compared to the steel version at 95lbs
- Built with .190″ heavy duty aluminum and 14ga steel telescoping top braces
- Mount anything from lights, Hi-lift, CO2 tank, fire extinguisher, quick-fist, roto-pax, spare tire, roof top tent, etc
- This is our HD model, utilizing three cross-members spanning the truck bed, this rack is has the highest weight capacity and provides even weight distribution on the trucks bed side rails
- Built in mounting points allow unlimited options for adding accessories
- Bolts to inside of bed rails or can alternatively be mounted with optional “drill-free” clamps
- Adjustable width adapts to any truck bed from 54″ – 64″ width between the bed rails
- Maintains very good visibility through the back window despite the low overall rack height
- Using this rack will minimize the aerodynamic drag normally associated with roof top tents by keeping it largely below the roof-line
- Slotted mounting points on top of rack accept nearly any roof top tent making mounting a breeze
- Includes TWO top braces for unlimited accessory and tent mounting options
- Heavy duty black textured powder coat finish comes standard, plus we take it a step further and coat all racks with an epoxy primer for an exponentially more durable finish
- Easy bolt together assembly, takes about 45 minutes to install
- All hardware for installation is included
- Adjustable Bedrack Install Guide
- Made in Loveland, Colorado USA
(6 reviews) -
Wheels
Warn 104484 6 Lug Epic Wheel Hubs Center Cap – Grey
- Suits Warn wheels made specifically for 6 Lug 2021+ Ford Bronco, 2019+ Ford Ranger, FJ Cruiser, 2005-2023 Toyota Tacoma, and 2003-2023 Toyota 4Runner, Lexus GX470 and GX460
- Grey Finish
- Expertly Made From Premium Materials
- Meets The Highest Quality Standards
- ISO 9001: 2015, ISO 14001: 2015 CERTIFIED
- Easy To Install
- Limited 90 Day Supplier Warranty
- Wheel Series Compatibility: Moonsault/ Diamond Cutter And Jack Hammer Series Wheels
- Bolt Pattern (MM): 6×139.7
- Installation Type: Bolt-On
- Style: Closed
- Color: Grey
- Quantity: Single
- Bolt Pattern (IN): 6×5.50
- Material: Plastic
- Estimated Install Time (Hours): 0.25
(9 reviews) -
Wheels
Warn 104483 6 Lug Epic Wheel Hubs Center Cap – Black
- Suits Warn wheels made specifically for 6 Lug 2021+ Ford Bronco, 2019+ Ford Ranger, FJ Cruiser, 2005-2023 Toyota Tacoma, and 2003-2023 Toyota 4Runner, Lexus GX470 and GX460
- Black Finish
- Expertly Made From Premium Materials
- Meets The Highest Quality Standards
- ISO 9001: 2015, ISO 14001: 2015 CERTIFIED
- Easy To Install
- Limited 90 Day Supplier Warranty
- Wheel Series Compatibility: Moonsault/ Diamond Cutter And Jack Hammer Series Wheels
- Bolt Pattern (MM): 6×139.7
- Installation Type: Bolt-On
- Style: Closed
- Color: Black
- Quantity: Single
- Bolt Pattern (IN): 6×5.50
- Material: Plastic
- Estimated Install Time (Hours): 0.25
(8 reviews) -
WheelsFREE SHIPPING
within 48 US StatesWarn 104487 Diamond Cutter Wheel – 17×8.5″ 6×5.5″ 0 Offset – Black
- Warn wheels made specifically for 6 Lug 2021+ Ford Bronco, 2019+ Ford Ranger, FJ Cruiser, 2005-2023 Toyota Tacoma, and 2003-2023 Toyota 4Runner, Lexus GX470 and GX460
- 17×8.5″ wheel with 0 Offset, 4.75″ backspacing, 6 lugs, Uses OEM lug nuts
- Sold Individually
- Black Finish
- 1 Piece Cast Aluminum Construction
- Compatible With TPMS (Tire Pressure Monitoring System)
- With Warn Logo Center Cap
- Limited Lifetime Structural Warranty
- Bolt Pattern Inch: Not Applicable
- Bolt Pattern Millimeter: Not Applicable
- Weight: 30 LBS
- Diameter: 17
- Width: 8.5
- Offset: 0
- Backspacing: 4.75
- Material: Aluminum
- Finish: Painted
- Color: Black
- Bolt Pattern Inch: 6×5.50
- Bolt Pattern Inch: Not Applicable
- Bolt Pattern Millimeter: 6×139.7
- Bolt Pattern Millimeter: Not Applicable
- Lug Nut Seat Type: 60 Degree Conical
- Center Cap: See Replacement Items
- Center Bore: 106.10
- Lug Nut Design: Acorn
- Compatible With TPMS (Tire Pressure Monitoring Sys: Yes
- Basic Design: 6 Spoke
- With Inserts: No
- Load Capacity: 2500
- Size: 17×8.5
- Max Tire Diameter: 40
- Center Cap Design: Warn Logo
- Structural Warranty: Lifetime
- Quantity: Single
- Construction: One Piece Cast
- With Hub Centric Ring: Yes
- Estimated Install Time (Hours): 0.5
- Prop 65 WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- This item is not returnable – any product damage must be reported to the shipping carrier within 48 hours of receipt.
(4 reviews) -
WheelsFREE SHIPPING
within 48 US StatesWarn 104490 Jack Hammer Wheel – 17×8.5″ 6×5.5″ 0 Offset – Gun Metal
- Warn wheels made specifically for 6 Lug 2021+ Ford Bronco, 2019+ Ford Ranger, FJ Cruiser, 2005-2023 Toyota Tacoma, and 2003-2023 Toyota 4Runner, Lexus GX470 and GX460
- 17×8.5″ wheel with 0 Offset, 4.75″ backspacing, 6 lugs, Uses OEM lug nuts
- Sold Individually
- Gun Metal Finish
- 1 Piece Cast Aluminum Construction
- Compatible With TPMS (Tire Pressure Monitoring System)
- With Warn Logo Center Cap
- Limited Lifetime Structural Warranty
- Bolt Pattern Inch: Not Applicable
- Bolt Pattern Millimeter: Not Applicable
- Weight: 30 LBS
- Diameter: 17
- Width: 8.5
- Offset: 0
- Backspacing: 4.75
- Material: Aluminum
- Finish: Painted
- Color: Gun Metal
- Bolt Pattern Inch: 6×5.50
- Bolt Pattern Inch: Not Applicable
- Bolt Pattern Millimeter: 6×139.7
- Bolt Pattern Millimeter: Not Applicable
- Lug Nut Seat Type: 60 Degree Conical
- Center Cap: See Replacement Items
- Center Bore: 106.10
- Lug Nut Design: Acorn
- Compatible With TPMS (Tire Pressure Monitoring Sys: Yes
- Basic Design: Solid Center
- With Inserts: No
- Load Capacity: 2500
- Size: 17×8.5
- Max Tire Diameter: 40
- Center Cap Design: Warn Logo
- Structural Warranty: Lifetime
- Quantity: Single
- Construction: One Piece Cast
- With Hub Centric Ring: Yes
- Estimated Install Time (Hours): 0.5
- Prop 65 WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- This item is not returnable – any product damage must be reported to the shipping carrier within 48 hours of receipt.
(4 reviews)
