Lexus

Showing 181–210 of 319 resultsSorted by popularity

Brake Lines + Bump Stops - Lexus GX460
FREE SHIPPING
within 48 US States
Timbren Bump Stops Front & Rear | Lexus GX460
- Suits 2010-2023+ Lexus GX460
- Includes both Front and Rear bump stops for the whole vehicle
- Active Off-Road Bumpstops provide off-road enthusiasts greater control over their vehicles’ suspension travel. Using progressive-rate springs means that instead of a hard stop at the end of axle travel the axle energy will be absorbed when bottoming-out producing smooth, predictable, and quiet axle engagement and disengagement.
- Unlike OEM bump stops, Active Off-Road Bumpstops are made from natural rubber. Just like our Timbren SES line, Active Off-Road Bumpstops carry a lifetime warranty and a satisfaction guarantee.
- ABSTORSEQ replaces the rear OEM bump stops and ABSTOF replaces the fronts on the Lexus GX460. Upgrade to Active Off-road Bumpstops and experience the difference.
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation
- Satisfaction Guarantee
- Lifetime Warranty
- Front Instructions and Rear Instructions
Rated 5.00 out of 5
(12 reviews)
$538.72 Add to cart
Bump Stops - Tundra 2022+
FREE SHIPPING
within 48 US States
Timbren Bump Stops Front & Rear | Tundra Sequoia LC250 GX550
- Suits the 2022-2025+ Toyota Tundra, 2023-2025+ Sequoia, 2024-2025+ Land Cruiser 250, Lexus GX550
- Includes both Front and Rear bump stops for the whole vehicle
- Active Off-Road Bump stops provide off-road enthusiasts greater control over their vehicles’ suspension travel. Using progressive-rate springs means that instead of a hard stop at the end of axle travel the axle energy will be absorbed when bottoming-out producing smooth, predictable, and quiet axle engagement and disengagement.
- Unlike OEM bump stops, Active Off-Road Bumpstops are made from natural rubber. Just like our Timbren SES line, Active Off-Road Bumpstops carry a lifetime warranty and a satisfaction guarantee.
- ABSTORTNDR replaces the rear OEM bump stops and ABSTOF replaces the fronts
- Upgrade to Active Off-road Bump stops and experience the difference
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation
- Satisfaction Guarantee
- Lifetime Warranty
- Front Instructions and Rear Instructions
Rated 5.00 out of 5
(12 reviews)
$538.72 Add to cart
Upper Control Arms
FREE SHIPPING
within 48 US States
Dobinsons Billet Aluminum UCA’s Pair | 200 Series Land Cruiser
- Super strong billet aluminum front upper control arms (UCA’s)
- Suits 2008-2021 Toyota Land Cruiser 200 Series and Lexus LX570
- Complete kit for both left and right hand side
- OE-style sealed ball joints for a maintenance free life
- OE-style high quality rubber bushings for maximum NVH dampening and longevity
- No greasing or maintenance required at all, completely noise-free operation
- Adjustable on-vehicle for quick and easy alignment.
- Adjustable Camber and Caster for perfecting the vehicle’s handling
- O-ring sealed ball joint cap for protection against the elements
- Works for any lift height of 1.5″ or more
- *Must reuse OEM Washers
- Installation Instructions
- We recommend visiting an offroad specific shop for alignment, a regular alignment shop may not be able to adjust and align properly due to the added adjustability these arms offer
- Replacement Ball Joints can be ordered here
- Photos for illustration purposes
Rated 5.00 out of 5
(8 reviews)
$1,195.00 Add to cart
GX460 (2010-2023)
FREE SHIPPING
within 48 US States
Dobinsons 1.5-2.5″ Pre-Assembled IMS Coilovers for Lexus GX460
- Suits 2010-2023 Lexus GX460 4×4 Models
- Looking for a quick and easy way to lift your GX460? This is your answer
- Select your desired lift height and spring rate – we’ll take care of the rest!!
- Dobinsons IMS are height adjustable by a fully threaded body
- The Dobinsons IMS Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
- Fully rebuildable and re-valvable
- 560mm extended, 420mm compressed
- SOLD IN PAIRS – READY TO BOLT IN
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Photos for illustration purposes
- Instructions for setting coil seat height
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle. Adding 2.5″ or more lift, new UCA’s should be added for proper articulation and correct wheel alignment
- Click to see Matching rear shocks
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
Rated 5.00 out of 5
(2 reviews)
$1,199.00 Select options
Brakes
FREE SHIPPING
within 48 US States
Powerbrake X-Line 4×4 Lexus GX470 Big Brake Kit 2003-2009
2003-2009 Lexus GX470 Big Brake Kit Includes:
- X-Line billet 6-piston off-road calipers (pair)
- High-performance brake pads, pre-loaded into the calipers
- 1-Piece 350mm x 34mm (13.77″ x 1.33″) 48-vane discs
- Curved, directional cooling vanes
- Billet caliper mounting brackets
- Stainless steel braided brake lines
- All necessary mounting hardware for quick, easy bolt-on installation
- Comprehensive fitment and bed-in instructions
- Manufactured, finished and packaged 100% in South Africa
- Now Includes Upgraded Powerbrake Pads, PB05 Compound – highest level 4×4 brake pads available – made in Japan
- REQUIRES 17″ WHEELS FOR ADEQUATE CALIPER CLEARANCE
- Check out the rear brake upgrade also
Rated 5.00 out of 5
(9 reviews)
$2,675.00
Caliper Color

Powerbrake X-Line 4x4 Lexus GX470 Big Brake Kit 2003-2009 quantity
Select options This product has multiple variants. The options may be chosen on the product page
Full Suspension Kits - 200 Series
FREE SHIPPING
within 48 US States
Dobinsons 1-2.5″ Pre-Assembled IMS Coilovers for Toyota Land Cruiser 200 Series
- Suits Toyota Land Cruiser 200 Series and Lexus LX570 2008-2021 Models with 5.7L V8 Gas Engine
- Looking for a quick and easy way to lift your 200 Series? This is your answer
- Select your desired lift height and tell us your weight – we’ll take care of the rest!!
- Dobinsons IMS are height adjustable by a fully threaded body
- The Dobinsons IMS Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
- Fully rebuildable and re-valvable
- 606mm extended, 438mm compressed
- SOLD IN PAIRS – READY TO BOLT IN
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Photos for illustration purposes
- Instructions for setting coil seat height
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle. Adding 2.5″ or more lift, new UCA’s should be added for proper articulation and correct wheel alignment
- Link to Matching rear shocks
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
Rated 5.00 out of 5
(8 reviews)
$1,260.00 Select options
ARB
OME 2885 Front Coil Springs | Toyota Lexus Trucks SUV’s – Pair
- OME Part Number 2885
- Bar Size : 16.5mm
- Free Height : 395mm
- Number of Turns : 9.75
- Coil Weight (each): 4.7 Kg | 10.3 lbs
- Spring Rate : 590 lbs
- Sold in Pairs
- These are NOT COMPATIBLE with the newer MT64 struts from Old Man Emu – They don’t fit
Rated 5.00 out of 5
(12 reviews)
$224.95 Add to cart
Differential | Drivetrain
FREE SHIPPING
within 48 US States
ARB RD111 Front Air Locker Toyota Lexus 8″ IFS 30 Spline 3.91+
- For Use With Toyota 8″ IFS Clamshell differential with 30 Spline Axles and 3.91 And Up FactoryGears
- Usually all models that came with an automatic transmission used 3.91+ gear ratios, but some more modern Toyota and Lexus use 3.73 gears from the factory
- Factory R&P may use either RD111 or RD121 depending on ratio. All known aftermarket R&P sets suit RD121.
- If you are changing to aftermarket gears, check with that gear manufacturer on which gears to order
- Full vehicle fitment list is further down in the main description, includes 4Runner, Tacoma, FJ Cruiser, GX470, GX460
- At the flick of a dash-mounted switch, compressed air is delivered to the seal housing assembly via a nylon air line.
- Instantaneously go from an open differential to a fully locked differential at the flick of a switch for maximum traction
- Requires an Air Compressor for operation, Sold Separately
- Why do they use air? Air is used on every semi truck on the road to reliably operate their brakes through solenoids, and ARB uses the same technology. When installed correctly, it’s ultra-reliable!!
- The ARB Air Locker is a pneumatic locking differential that uses air to facilitate the locking of both axles. This action converts your differential from a conventional open to a full spool type axle supplying 100% power to both wheels to keep you going through the worst terrain.
- This Air Locker kit includes the full differential, instruction booklet, airline, fittings, switch and cover, and necessary seals. When combined with an Air Compressor and the original differential, you’ll have everything you need as far as parts go.
- Full specification sheet, including all included parts, CLICK HERE
- It’s recommended that a qualified differential mechanic do the installation for proper setup
- Covered by a full manufacturer’s 5 YEAR WARRANTY
Rated 5.00 out of 5
(11 reviews)
$1,113.95 Select options
4Runner 4th Gen (2003-2009)
FREE SHIPPING
within 48 US States
Dirt King Performance Lower Control Arms Pair – 4th Gen T4R Early FJC GX470 non-KDSS
- Suits 2003-2009 Toyota 4Runner 2WD / 4WD, 2003-2009 Lexus GX470 4WD, 2007-2009 Toyota FJ Cruiser 2WD / 4WD
- CAD designed
- Formed steel bushing gussets
- Internally ribbed with extrusions for weight reduction
- Preassembled for fast installation
- Grease fitting ports for easy servicing
- Zinc plated components for corrosion resistance
- Bump stop plating
- Limit strap tabbing
- Bypass shock tabbing
- Professionally MIG welded
- Proudly made in the USA
Rated 5.00 out of 5
(4 reviews)
$1,812.00 Add to cart
Snorkel
FREE SHIPPING
within 48 US States
Dobinsons 100 Series Snorkel Kit for Land Cruiser 1998-2007
- 100 Series Snorkel Kit – Suits Lexus LX470 and Toyota Land Cruiser 100 Series 1998-2007 Models
- Smooth body, no words or logo on the body
- Rotationally molded using precision CNC shaped aluminum dies
- Increases air intake height to allow safer water crossings and reduce dust intake
- Increased air intake height rams cooler, cleaner air into the engine increasing engine performance
- The higher the intake, the less dust is in the air
- Manufactured from high quality UV resistant LLDPE
- Snorkel Kits include template and all mounting hardware
- Installation Instructions
Rated 5.00 out of 5
(9 reviews)
$355.00 Add to cart
Brake Lines
FREE SHIPPING
within 48 US States
Apache Offroad Extended Front Brake Lines | 4Runner FJ GX470 GX460 Tacoma Tundra Sequoia
- Suits the following vehicles: Toyota 4Runner 4th Gen 2003-2009, Toyota 4Runner 5th Gen 2010-2024, Toyota FJ Cruiser all years, Lexus GX470 all years, Lexus GX460 all years, Tacoma 2005-2023, Tundra 2000-2006, Sequoia 2001-2007
- D.O.T. Certified stainless steel braided and coated with a PVC cover
- +2″ longer than stock
- Suits up to 4″ of lift with extended travel struts or coilovers, or stock
- Can be used on a stock height vehicle
- Sold as a pair
- OE Style Fittings- Reuse OEM Clips
- Warranty- 2 Year unlimited mile warranty against manufacturers defects
Rated 5.00 out of 5
(10 reviews)
$99.00 Add to cart
Dobinsons
Dobinsons UCA Ball Joint Cap Cover for Tubular UCA’s
- Suits all Dobinsons Tubular UCA’s
- Fits the UCA’s made for Tacoma, 4Runner, GX470, GX460, LC100, LC200, Ranger, Hilux, Fortuner
- Machined ball joint cap with o-ring to seal the top of a ball joint
- Black with Dobinsons logo engraved in it
- Sold individually
Rated 5.00 out of 5
(6 reviews)
$30.00 Add to cart
LX470
FREE SHIPPING
within 48 US States
Powerbrake X-Line Lexus LX470 Big Brake Kit 1998-2007
1998-2007 Front Lexus LX470 Big Brake Kit Includes:
- X-Line front billet 6-piston off-road calipers (pair)
- High-performance brake pads, pre-loaded into the calipers
- 1-Piece 13.7″ x 1.33″ 48-vane discs
- 48 Curved, directional cooling vanes
- Billet caliper mounting brackets
- Stainless steel braided brake lines
- All necessary mounting hardware for quick, easy bolt-on installation
- Comprehensive fitment and bed-in instructions
- Now Includes Upgraded Powerbrake Pads, PB05 Compound – highest level 4×4 brake pads available – made in Japan
- Manufactured, finished and packaged 100% in South Africa
- REQUIRES 17″ WHEELS FOR ADEQUATE CALIPER CLEARANCE
- Photos are used to show detail and appearance, actual product for this vehicle may vary
Rated 5.00 out of 5
(3 reviews)
$2,675.00
Caliper Color

Powerbrake X-Line Lexus LX470 Big Brake Kit 1998-2007 quantity
Select options This product has multiple variants. The options may be chosen on the product page
Full Suspension Kits - GX460
Dobinsons 1.5-3.5″ Pre-Assembled Twin Tube Lexus GX460 Coilovers
- Suits Lexus GX460 4×4 Models 2010-2023, with or without KDSS
- Set of twin tube coilovers for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Choose the appropriate coils to match the lift height you want that also suits the added weight you have on the vehicle
- Nitrogen Gas Charged Struts, Superior Design, thicker walls, longer travel
- Direct Bolt-in Replacements, Pre-Assembled and Ready To Go
- 32mm Bore Size, Double Chromed 18mm Rod
- 51mm Body Size
- High Quality Fuch’s German Shock Oil
- NOK Multi-Lip Seals
- Teflon Piston Rings
- Natural Rubber Bushings for the Best NVH Dampening
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Built to order
- Lift heights are subject to variations in vehicle years as well as accessory weights, engine differences, and other variables.
Rated 5.00 out of 5
(5 reviews)
From $890.00 Select options
Timbren
FREE SHIPPING
within 48 US States
Timbren TORSEQ SES Suspension Enhancement System | Toyota and Lexus SUV’s
- Suits 4th and 5th Gen 4Runner (2003-2024), FJ Cruiser, Lexus GX470 and GX460, Landcruiser 100 Series, Sequoia 2001-2007
- This is only for use with stock height rear coils – will not work correctly on a lifted vehicle
- Great alternative to airbags, never needs any air or maintenance yet provides the same function
- Reduces sag, sway, and roll when towing and hauling
- Comfortable ride, loaded or unloaded
- DIY installation
- Bolts in where the factory bump stops go
- Zero post-installation maintenance
- Satisfaction Guarantee
- Lifetime Warranty
- Installation Instructions
Rated 5.00 out of 5
(14 reviews)
$269.36 Add to cart
GX460 (2010-2023)
FREE SHIPPING
within 48 US States
Dobinsons 2-3.5″ Extended Travel Pre-Assembled IMS Coilovers for Lexus GX460
- Suits 2010-2023 Lexus GX460 4×4 Models
- Looking for a quick and easy way to lift your GX460? This is your answer
- Select your desired lift height and spring rate – we’ll take care of the rest!!
- Dobinsons IMS are height adjustable by a fully threaded body
- The Dobinsons IMS Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
- Fully rebuildable and re-valvable
- Extended Travel – 575mm fully extended, 430mm compressed
- SOLD IN PAIRS – READY TO BOLT IN
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Photos for illustration purposes
- Instructions for setting coil seat height
- To run these Extended Travel coilovers, new UCA’s need to be added for proper articulation and correct wheel alignment. A diff drop kit is also recommended to minimize CV binding at full droop
- Click to see Matching rear shocks
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
Rated 5.00 out of 5
(5 reviews)
$1,199.00 Select options
Skid Plates
FREE SHIPPING
within 48 US States
RCI Catalytic Guards | 2003-24 4Runner / FJ / GX
- REQUIRES RCI TRANSMISSION SKID PLATE FOR INSTALLATION
- Fits: 2003-2024 4Runner, FJ Cruiser (all years), GX470 and GX460 (all years)
- Protects exposed catalytic converters from on and off road debris
- Excellent addition to the RCI Transmission skid to aid in preventing catalytic converter thefts
- Vented design for adequate airflow and heat dissipation
- Smooth, flat surface that easily slides over obstacles
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing RCI Transmission skid, drilling may be required until manufacturing begins on pre cut out holes on Transmission skid plate
- Designed around the most current RCI transmission skid plate with 2in double bent side flange
- Requires RCI Transmission Skid Plate for installation
- Catalytic Guard Retrofit Guide for RCI Transmission Skid Plates
Rated 5.00 out of 5
(2 reviews)
$128.99 Select options
Sequoia 3rd Gen (2023-2025+)
Dobinsons C59-853V Rear Coil Springs Pair
- Dobinsons C59-853V Rear Coils for the 2023+ Toyota Sequoia
- Lifts 3″ with 440LBS constant load on a standard model, and 2″ with 440LBS of constant load on a TRD Pro (TRD Pro comes 1″ lifted from the factory)
- This also fits the 2021+ Land Cruiser 300 Series, gives 50mm lift with 280-400KG constant added weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- Variable Rate Coils
- Longer shocks required, the factory shocks are not long enough to run with these coils
- Select from Twin Tube, IMS Monotube or MRA 3-Way Adjustable with Remote Resi
Rated 5.00 out of 5
(1 review)
$305.00
Coil Color

Dobinsons C59-853V Rear Coil Springs Pair quantity
Select options This product has multiple variants. The options may be chosen on the product page
Sequoia 3rd Gen (2023-2025+)
FREE SHIPPING
within 48 US States
Dobinsons MRA59-A441 2.6″ 3-Way Adjustable Rear Shocks Pair
- Suits 2023+ Toyota Sequoia with 2-3″ of lift using Dobinsons Coils
- Also suits 2021+ Toyota Land Cruiser 300 Series and 2024+ Land Cruiser 250 Series and Lexus GX550
- 3-way adjustable valving – Adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Specifications – 680mm extended, 422mm compressed
- SOLD IN PAIRS
- Includes Reservoir Brackets and Hardware, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
Rated 5.00 out of 5
(15 reviews)
$1,350.00 Add to cart
Bilstein
FREE SHIPPING
within 48 US States
Bilstein 47-310025 Front 6112 Series Kit
- Bilstein 6112 Series Ride Height Adjustable Front Coilover Kit
- Suits 2010-2024 Toyota 4Runner, 2010-2023 Lexus GX460
- Sold as a set, 1 per vehicle
- Photo shows all parts included (does not include top strut mounts)
- Reservoir: No
- Finish: Zinc Plated
- Body Design: 60mm ID snap ring grooved body (Coilover)
- Internal Design: Mono tube
- Boot Included: No
- Coil Springs Included: Yes
- Spring Rate: 600 LBF/in
- Not for X-REAS suspension
- Strut mounts are not included – USE THIS KIT
- Installation Instructions
- Suitable matching rear shocks
Rated 5.00 out of 5
(5 reviews)
$842.00 Add to cart
ARB
OME 2895 Rear Coil Springs | 4Runner FJ Cruiser GX470 GX460 – Pair
- OME Part Number 2895
- Bar Size : 16.5 mm
- Free Height : 390mm
- Number of Turns : 6.21
- Coil Weight (each): 4.6 Kg | 10.1 lbs
- Spring Rate : 260 lbs
- Sold in Pairs
Rated 5.00 out of 5
(13 reviews)
$224.95 Add to cart
GX470 (2002-2009)
FREE SHIPPING
within 48 US States
Dobinsons 1-3.5″ 3-Way Adjustable MRA GX470 Coilovers
- Suits Lexus GX470 – all years 2003-2009
- Looking for a quick and easy way to lift your GX470? This is your answer
- Select your desired lift height and spring rate – we’ll take care of the rest!!
- Dobinsons MRA are height adjustable by a fully threaded body
- The Dobinsons MRA Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- Extended Travel – 567mm extended, 417mm compressed
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
- Resi installation instructions
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle. Adding 2.5″ or more lift, new UCA’s should be added for proper articulation and correct wheel alignment
- Link to Matching rear shocks
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
Rated 5.00 out of 5
(3 reviews)
$1,820.00 Select options
Front Bumpers
Dobinsons Front Winch Bumper for Lexus GX470
- Suits Lexus GX470 from 2003 to 2009 with Fender Flares
- Airbag and winch compatible, Driving Light Mounts, Heavy Duty Black Powder Coat Finish
- 3mm Thick Main Body, 4mm + 5mm Thick Bracket, 1.6mm Bash Plates, 51mm top tubes
- Includes LED Turn Signals and all Required Hardware for Installation
- Separate Winch Cradle System, making installation faster. (does not include winch)
- Supplied Black, but can be painted by your paint shop.
- Suits 10000 – 12000 LB Low Mount Winches.
- Installation Instructions
- Ships to the nearest freight terminal on a pallet for you to pick up unless you add home delivery (extra cost). We will be in touch with that delivery address
Rated 5.00 out of 5
(3 reviews)
From $1,765.00 Select options
Skid Plates
FREE SHIPPING
within 48 US States
RCI Lexus GX470 & GX460 V8 Transmission Skid Plate
- Fits USA spec Lexus GX470 and Lexus GX460 V8 Models 2003-2023
- Protects transmission, second and third cross-members, and exhaust
- Excellent addition or replacement of weak, lightweight OEM skid plates (which do not provide any coverage over transmission)
- Service openings for maintenance without removal
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Built in drainage holes, which also help prevent suction of skid plates in mud and snow
- Smooth, flat surface that easily slides over obstacles
- Black powder coat available for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Made in the USA
Rated 5.00 out of 5
(4 reviews)
$209.99 Select options
ARB
OME 2889 Rear Coil Springs | 4Runner FJ Cruiser GX470 GX460 – Pair
- OME Part Number 2889
- Bar Size : 16.5 mm
- Free Height : 400mm
- Number of Turns : 6.21
- Coil Weight (each): 4.6 Kg | 10.1 lbs
- Spring Rate : 260 lbs
- Sold in Pairs
Rated 5.00 out of 5
(11 reviews)
$224.95 Add to cart
ARB
OME 2886 Front Coil Springs | Toyota Lexus Trucks SUV’s – Pair
- OME Part Number 2886
- Bar Size : 17.5mm
- Free Height : 402mm
- Number of Turns : 10.6
- Coil Weight (each): 5.9 Kg | 13 lbs
- Spring Rate : 660 lbs
- Sold in Pairs
- These are NOT COMPATIBLE with the newer MT64 struts from Old Man Emu – They don’t fit
Rated 5.00 out of 5
(7 reviews)
$224.95 Add to cart
Differential | Drivetrain
FREE SHIPPING
within 48 US States
ARB RD132 Air Locker Toyota Lexus 8″ 10 bolt 30 Spline
- For Use With Toyota 8″ 10 bolt 30 Spline solid axle – used for many years in some front and rear applications
- Full vehicle fitment list is further down in the main description, includes 4Runner, Tacoma, FJ Cruiser, GX470 – be sure to check the list below before ordering!!
- At the flick of a dash-mounted switch, compressed air is delivered to the seal housing assembly via a nylon air line.
- Instantaneously go from an open differential to a fully locked differential at the flick of a switch for maximum traction
- Requires an Air Compressor for operation, Sold Separately
- Why do they use air? Air is used on every semi truck on the road to reliably operate their brakes through solenoids, and ARB uses the same technology. When installed correctly, it’s ultra-reliable!!
- The ARB Air Locker is a pneumatic locking differential that uses air to facilitate the locking of both axles. This action converts your differential from a conventional open to a full spool type axle supplying 100% power to both wheels to keep you going through the worst terrain.
- This Air Locker kit includes the full differential, instruction booklet, airline, fittings, switch and cover, and necessary seals. When combined with an Air Compressor and the original differential, you’ll have everything you need as far as parts go.
- Full specification sheet, including all included parts, CLICK HERE
- It’s recommended that a qualified differential mechanic do the installation for proper setup
- Covered by a full manufacturer’s 5 YEAR WARRANTY
Rated 5.00 out of 5
(7 reviews)
$1,113.95 Select options
4Runner 5th Gen (2010-2024)
FREE SHIPPING
within 48 US States
Dirt King Performance Lower Control Arms Pair – 5th Gen T4R Late FJC GX460 non-KDSS
- CAD designed
- Formed steel bushing gussets
- Internally ribbed with extrusions for weight reduction
- Preassembled for fast installation
- Grease fitting ports for easy servicing
- Zinc plated components for corrosion resistance
- Bump stop plating
- Limit strap tabbing
- Bypass shock tabbing
- Professionally MIG welded
- Proudly made in the USA
Rated 5.00 out of 5
(4 reviews)
$1,812.00 Add to cart
Rear Bumpers
FREE SHIPPING
within 48 US States
Dobinsons GX460 Rear Bumper with Tire and Jerry Can Carrier
- Suits Lexus GX460 from 2010-2023
- Black Powder Coat
- Stainless Steel Latch and Hardware
- Complete Kit with Everything Included
- Includes double Jerry can carrier and single spare tire carrier
- All Lighting is 12V LED, requires splicing into original wiring harness (not plug and play)
- Does not include any hitch or towing ability. Designed to work around standard type tow hitch below rear cross member
- Adjustable offset tire carrier head, suitable up to a 35″ tire
- Instructions Page
- 2010-2013 requires slight notch above bumper to clear swing outs.
- 2014 and up requires heavy modification to the OEM bumper to clear swing outs.
- Video detailing fitment steps on a 2014+ Model – https://youtu.be/LJPSsFSor7k
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address
Rated 5.00 out of 5
(14 reviews)
$2,860.00 Select options
Suspension
FREE SHIPPING
within 48 US States
Apache Offroad Assembled Tubular UCA Pair | 4Runner FJ Cruiser GX470 GX460
- Suits Toyota 4Runner 4th and 5th Gen 2003-2024, FJ Cruiser all years, Lexus GX470 and GX460
- Complete assembled kit for both left and right hand side, includes new Moog ball joints, ball joint caps, rubber frame bushings
- Has 3 degrees of caster built in, no adjustability or settings required
- Has more clearance around the ball joint than factory UCA’s for better tire clearance
- Manufactured from Black Powder coated 1.5″ Steel Tube
- The Apache UCAs Feature Hardened Rubber Bushings for a quiet ride
- Comes assembled with OE sized Greaseable Moog Problem Solver Ball Joints
- Includes Machined Aluminum Dust Covers with dust seals
- Works for any lift height of 2.0″ or more. Any height less than that, a proper wheel alignment may not be able to be achieved
- Do not forget to grease your ball joints 🙂 They do not come pre-greased.
- Product Video
Rated 5.00 out of 5
(10 reviews)
$645.00 Add to cart