Archives

on
  • Suits 3rd Gen 4Runner 1996-2002 4×4 Models
  • Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
  • Base Kit Price Includes 2 Front MRA Struts, 2 Rear MRA Shocks, and 4 Standard Coil Springs
  • High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
  • For information and specs on the products in the drop down lists below, select an item, then click the small square box that will appear to the right to be taken to that product page
  • Coils are specifically suited to the additional accessory load (weight) on the vehicle
  • 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
  • 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
  • 20 Stage Low Speed Compression – For creepy crawling and cornering
  • 15 Stage Rebound – Control your coils, prevent bucking
  • 50mm CNC Machined High Flow Billet Aluminum Race Piston
  • 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
  • Upgraded 3 Stage FKM‐HNBR Sealing System
  • TSUGAMI™ CNC machined components for precise tolerances
  • Parker™ Braided High Pressure Hoses
  • 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
  • T6 6061 Height Adjustable Spring Seat
  • Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
  • 60mm Full 6063 aluminum remote reservoir
  • Lightweight CNC Machined Low Friction floating piston
  • High Quality O.E.M. Grade Natural Rubber Bushings
  • Single Piece Lower Leg
  • EDP Surface Protection
  • Direct Bolt-On Design
  • CNC TIG Precision Welded Body End Mounts
  • Fully Rebuildable Design
  • Full 2 year limited warranty, no set rebuild time period
  • High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
  • Note: A diff drop kit and aftermarket higher clearance UCA’s should be run with the front struts to prevent CV bind and coil contact
  • Common installation instructions

on
  • Suits 3rd Gen Toyota 4Runner 1996-2002
  • Suits Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
  • 3-way adjustable valving – adjust high and low speed compression and rebound
  • Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
  • 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
  • 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
  • 20 Stage Low Speed Compression – For creepy crawling and cornering
  • 15 Stage Rebound – Control your springs, prevent bucking
  • 50mm CNC Machined High Flow Billet Aluminum Race Piston
  • 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
  • Upgraded 3 Stage FKM‐HNBR Sealing System
  • TSUGAMI™ CNC machined components for precise tolerances
  • Parker™ Braided High Pressure Hoses
  • 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
  • Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
  • 60mm Full 6063 aluminum remote reservoir
  • Lightweight CNC Machined Low Friction floating piston
  • High Quality O.E.M. Grade Natural Rubber Bushings
  • Single Piece Lower Leg
  • EDP Surface Protection
  • Direct Bolt-On Design
  • CNC TIG Precision Welded Body End Mounts
  • Fully Rebuildable Design
  • 530mm extended length, 344 compressed
  • SOLD IN PAIRS
  • Includes Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
  • Full 2 year limited warranty, no set rebuild time period
  • Photos for illustration purposes

on
  • Suits 1996-2002 Toyota 4Runner 4×4 Models
  • Looking for a quick and easy way to lift your 4Runner?  This is your answer
  • Extended Travel MRA59-A222 Coilovers – 458mm extended, 335mm compressed lengths
  • Dobinsons MRA are height adjustable by a fully threaded body
  • The Dobinsons MRA Coilovers will come pre-assembled with new struts, coils and top mounts
  • Fully rebuildable and re-valvable
  • SOLD IN PAIRS – READY TO BOLT IN
  • Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
  • 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
  • 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
  • 20 Stage Low Speed Compression – For creepy crawling and cornering
  • 15 Stage Rebound – Control your coils, prevent bucking
  • 50mm CNC Machined High Flow Billet Aluminum Race Piston
  • 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
  • Upgraded 3 Stage FKM‐HNBR Sealing System
  • TSUGAMI™ CNC machined components for precise tolerances
  • Parker™ Braided High Pressure Hoses
  • 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
  • T6 6061 Height Adjustable Spring Seat
  • Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
  • 60mm Full 6063 aluminum remote reservoir
  • Lightweight CNC Machined Low Friction floating piston
  • High Quality O.E.M. Grade Natural Rubber Bushings
  • Single Piece Lower Leg
  • EDP Surface Protection
  • Direct Bolt-On Design
  • CNC TIG Precision Welded Body End Mounts
  • Includes Universal Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
  • Full 2 year limited warranty, no set rebuild time period
  • Photos for illustration purposes
  • Instructions for setting coil seat height
  • It’s recommended that these coilovers to be run with a diff drop kit and aftermarket UCA’s for coilover clearance and correct travel
  • Link to matching rear shocks
  • Please NOTE: Assembled coilovers cannot be returned, as they are made to order

on
  • Suits 1998-2004 Toyota Tacoma 4×4 Models
  • Looking for a quick and easy way to lift your Tacoma?  This is your answer
  • Extended Travel MRA59-A222 Coilovers – 458mm extended, 335mm compressed lengths
  • Dobinsons MRA are height adjustable by a fully threaded body
  • The Dobinsons MRA Coilovers will come pre-assembled with new struts, coils and top mounts
  • Fully rebuildable and re-valvable
  • SOLD IN PAIRS – READY TO BOLT IN
  • Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
  • 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
  • 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
  • 20 Stage Low Speed Compression – For creepy crawling and cornering
  • 15 Stage Rebound – Control your coils, prevent bucking
  • 50mm CNC Machined High Flow Billet Aluminum Race Piston
  • 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
  • Upgraded 3 Stage FKM‐HNBR Sealing System
  • TSUGAMI™ CNC machined components for precise tolerances
  • Parker™ Braided High Pressure Hoses
  • 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
  • T6 6061 Height Adjustable Spring Seat
  • Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
  • 60mm Full 6063 aluminum remote reservoir
  • Lightweight CNC Machined Low Friction floating piston
  • High Quality O.E.M. Grade Natural Rubber Bushings
  • Single Piece Lower Leg
  • EDP Surface Protection
  • Direct Bolt-On Design
  • CNC TIG Precision Welded Body End Mounts
  • Includes Universal Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
  • Full 2 year limited warranty, no set rebuild time period
  • Photos for illustration purposes
  • Instructions for setting coil seat height
  • It’s recommended that these coilovers to be run with a diff drop kit and aftermarket UCA’s for coilover clearance and correct travel
  • Link to Matching rear shocks
  • Please NOTE: Assembled coilovers cannot be returned, as they are made to order