Your cart is currently empty!
Suspension
Showing 991–1020 of 1038 results
-
Full Suspension Kits - FJ70 BJ70 BJ71 FJ73 BJ73 FJ74 BJ74Ships FREE !!
within 48 US StatesDobinsons 2.0″ MRA Suspension Kit Toyota Land Cruiser FJ70 BJ70 BJ71 FJ73 BJ73 FJ74 BJ74
- Full 2″ MRA Suspension Kit Replacement for Toyota Land Cruiser FJ70 BJ70 BJ71 FJ73 BJ73 FJ74 BJ74
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Select medium or heavy load leaf spring options
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- External Remote Oil Reservoir with dual speed compression adjustment
- Single Piece Lower Leg, Natural Rubber Bushings Top and Bottom
- Triple Lip Oil Seal for Superior Lifespan
- Direct Bolt-on, Fully Rebuildable Design
- Pre-Charged with Nitrogen, Ready to be Assembled and Installed
- EDP Surface Protection, 3mm Heavy Duty Wall Thickness
- Includes Universal Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Ships by Fedex ground, multiple packages (4 loose leaf springs and a box with everything else)
From $4,035.00 Select options -
FJ/BJ70, BJ71, FJ/BJ73, FJ/BJ74
Dobinsons HJ61-8L-R Rear Super Heavy Load Leaf Springs Pair
- Rear Leaf Springs for the Toyota FJ/BJ70, BJ71, FJ/BJ73, FJ/BJ74 4×4 from 1985 to 1989 and 70 Series – HZJ70, HZJ73, PZJ70, PZJ73 1990-1999
- 50mm rear lift with SUPER HEAVY rear end weight of 660LBS+
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Sold as a pair, includes 1 left and 1 right spring (different heights to correct lean)
$570.00 Add to cart - Rear Leaf Springs for the Toyota FJ/BJ70, BJ71, FJ/BJ73, FJ/BJ74 4×4 from 1985 to 1989 and 70 Series – HZJ70, HZJ73, PZJ70, PZJ73 1990-1999
-
Dobinsons
Dobinsons HJ61-7L-R Rear Heavy Load Leaf Springs Pair
- Rear Leaf Springs for the Toyota FJ/BJ70, BJ71, FJ/BJ73, FJ/BJ74 4×4 from 1985 to 1989
- 50mm rear lift with 330LBS of additional constant weight
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Sold as a pair, includes 1 left and 1 right spring (different heights to correct lean)
$430.00 Add to cart -
ARB
OME 2899 Rear Coil Springs | 4Runner FJ Cruiser GX470 GX460
- OME Part Number 2899
- Bar Size : 19 mm
- Free Height : 400mm
- Number of Turns : 6.75
- Coil Weight (each): 6.9 Kg | 15.2 lbs
- Spring Rate : 387 lbs
- Sold in Pairs
$214.00 Add to cart -
ARB
OME 2898 Rear Coil Springs | 4Runner FJ Cruiser GX470 GX460
- OME Part Number 2898
- Bar Size : 18 mm
- Free Height : 400mm
- Number of Turns : 6.75
- Coil Weight (each): 6.1 Kg | 13.4 lbs
- Spring Rate : 318 lbs
- Sold in Pairs
$214.00 Add to cart -
ARB
OME 2896 Rear Coil Springs | 4Runner FJ Cruiser GX470 GX460
- OME Part Number 2896
- Bar Size : 18 mm
- Free Height : 390mm
- Number of Turns : 6.75
- Coil Weight (each): 6.1 Kg | 13.4 lbs
- Spring Rate : 318 lbs
- Sold in Pairs
$214.00 Add to cart -
ARB
OME 2888 Front Coil Springs | Toyota Lexus Trucks SUV’s
- OME Part Number 2888
- Bar Size : 17 mm
- Free Height : 405mm
- Number of Turns : 10.75
- Coil Weight (each): 4.7 Kg | 10.3 lbs
- Spring Rate : 590 lbs
- Sold in Pairs
$214.00 Add to cart -
ARB
OME 2887 Front Coil Springs | Toyota Lexus Trucks SUV’s
- OME Part Number 2887
- Bar Size : 17 mm
- Free Height : 400mm
- Number of Turns : 10.75
- Coil Weight (each): 4.7 Kg | 10.3 lbs
- Spring Rate : 590 lbs
- Sold in Pairs
$214.00 Add to cart -
Gladiator JT 2020-2024+
Dobinsons C29-229V Rear 2.0″ Lift Coils for Jeep Gladiator
- Suits 2020+ Jeep Gladiator JT Pickup Truck.
- Lifts 2.0″ with Stock Weight up to 220LBS of constant weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Teal
- Sold as a Pair
$270.00 Select options -
Gladiator JT 2020-2024+
Dobinsons C29-233V Rear 3.0″ Lift Coils for Jeep Gladiator
- Suits 2020+ Jeep Gladiator JT Pickup Truck.
- Lifts 3.0″ with Stock Weight, and 2″ with 200-400LBS rear end constant weight (rack, RTT, etc)
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Teal
- Sold as a Pair
$270.00 Select options -
Gladiator JT 2020-2024+
Dobinsons C29-228V Front 3.0″ Lift Coils for Jeep Gladiator – Stock Weight
- Suits 2020+ Jeep Gladiator JT Pickup Truck. Lifts 3.0″ with stock front end weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold as a Pair
$270.00 Select options -
Gladiator JT 2020-2024+Ships FREE !!
within 48 US StatesDobinsons IMS29-60743 Rear 2.6″ IMS Shocks Pair | Jeep Gladiator
- Fits Jeep Gladiator 2020+
- Suits vehicles with 2-3.5″ of lift
- SOLD IN PAIRS
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- 732mm extended, 460mm compressed
$650.00 Add to cart -
Trooper
Dobinsons C21-165V Rear Coil Springs for Isuzu Trooper 1992-2000
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold as a Pair
$270.00 Add to cart -
Pathfinder R51 (2005-2012)
Dobinsons Lift Kit Builder | Nissan Pathfinder R51 2005-2012 (all options)
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- See every option from Dobinsons all on one page
- Full strut and shock information can be seen by making a selection, then clicking on the small square that appears to the right of the box
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base kit Includes 2 Front Struts, 2 Rear Shocks, and 4 Coil Springs
- You choose what level of performance you’d like up front, whether it’s the standard twin tube, IMS monotube, or MRA remote reservoir 3-way adjustable struts
From $1,200.00 Select options -
DobinsonsShips FREE !!
within 48 US StatesDobinsons MRA45-A642 3-Way Adjustable Struts Pair | Xterra Frontier Pathfinder R51
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- External Remote Oil Reservoir with dual speed compression adjustment
- Single Piece Lower Leg, Natural Rubber Bushings Top and Bottom
- Triple Lip Oil Seal for Superior Lifespan
- Direct Bolt-on, Fully Rebuildable Design
- Pre-Charged with Nitrogen, Ready to be Assembled and Installed
- EDP Surface Protection, 3mm Heavy Duty Wall Thickness
- Includes Universal Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Does not include coil springs or top mounts – sold separately
- Standard coil seat height should be set to 106mm from the center of the lower bushing eye to the bottom of the coil seat
- Due to the Restricted Suspension Geometry, a Maximum of 40mm Lift is Achievable in the Front of this Vehicle.
- 395mm extended, 266mm compressed
- FITTING INSTRUCTIONS
- Instructions on setting coil seat height
$1,280.00 Add to cart -
Dobinsons
Dobinsons Add-A-Leaf Center Bolt Pin (Single) (10-90)
- Used in place of original leaf bolt when adding a leaf
- Fits Fits L59-121-R R3 ONLY for 2008+ Tundra
- Sold individually
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Requires lifted leaf springs to ensure proper fitment
$5.00 Add to cart -
40 Series Land Cruiser Late (1980-1984)
Dobinsons TOY-036-R Rear Leaf Springs Pair for 80+ FJ40 BJ40 35mm eyes – Heavy Load
- Suits 1980+ FJ40 and BJ40 models with 35mm eyes.
- Gives 45-50mm lift with 300LBS+ of constant rear weight
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Sold as a pair – bushings, u-bolts and all other parts sold separately
- Photo for illustration purposes only
$430.00 Add to cart -
40 Series Land Cruiser Late (1980-1984)
Dobinsons HJ47-7L-F Front Leaf Springs Pair for 80+ FJ40 BJ40 35mm eyes – Heavy Load
- Suits 1980+ FJ40 and BJ40 models with 35mm eyes.
- Gives 45mm with 300LBS+ constant front end weight
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Sold as a pair – bushings, u-bolts and all other parts sold separately
- Photo for illustration purposes only
$430.00 Add to cart -
Explorer U502 AWD 2012+
Dobinsons Rear Shocks Pair | Ford Explorer U502 AWD 2012+ 3.5L 3.7L
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Sold in Pairs
- Specifications: 640mm extended, 490mm compressed
$350.00 Add to cart -
Explorer U502 AWD 2012+
Dobinsons Front Struts Pair | Ford Explorer U502 AWD 2012+ 3.5L 3.7L
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Sold in Pairs, one for the left side and one for the right side
- Specifications: 588mm extended, 393mm compressed
$420.00 Add to cart -
SPCShips FREE !!
within 48 US StatesSPC 25670 | UCA’s for Ford Ranger US-Spec 2019-2020
- Suits Ford Ranger US-Spec 2019-2020 with aluminum knuckles
- Improved clearance to get around the spring bucket
- 80° of articulation in its ball joint
- SPC’s arm gives you maximum droop travel.
- Arm will get you -1.0° to +3.00° of caster and ±2° of camber
- Maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming
- Installation Instructions
- NOTE: For Rangers with aluminum knuckles ONLY
$749.95 Add to cart -
Pro Comp
Pro Comp 65225 2.5″ Leveling Kit – Sequoia and Tundra 2008-2021
- Fits 2007 to 2021 Toyota Tundra
- Fits 2008 to 2022 Toyota Sequoia
- Level Lift Front Strut Spacers
- Includes Diff Drop Kit
- Lift Height: 2.5 Inch
- Max Tire Size: 33 Inch
- Easy to return to stock height
- View/Download Installation Instructions
Original price was: $179.99.$95.00Current price is: $95.00. Add to cart -
Pro Comp
Pro Comp 65175 2.5″ Leveling Kit – Sequoia and Tundra
- Fits 2000 to 2006 Toyota Tundra
- Fits 2001 to 2007 Toyota Sequoia
- Level Lift Front Strut Spacers
- Includes Diff Drop Kit
- Lift Height: 2.5 Inch
- Max Tire Size: 32 Inch
- Easy to return to stock height
- View/Download Installation Instructions
Original price was: $179.99.$95.00Current price is: $95.00. Add to cart -
80 Series Land Cruiser (1990-1997)
Dobinsons C59-317 Rear Coil Springs | Land Cruiser 80 Series
- 80 Series – c59-317 6″ lift with stock weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 560/570mm free height, 21mm wire, 303LBF/in rate
- Sold in Pairs
$405.00 Add to cart -
Bump Stops
Dobinsons Hydro Bump Weld On Mounting Cans 2.6″ 66mm (Pair)
- Dobinsons threaded weld-on cans (pair) for 2.6″ / 66mm body Hydro Bumps
- Threaded weld can
- Zinc coating for rust prevention (Must be ground off before welding)
- 3mm walls for increased strength
- Sold in Pairs
$150.00 Add to cart -
Bump Stops
Dobinsons Hydro Bump Weld On Mounting Cans 2.2″ 56mm (Pair)
- Dobinsons threaded weld-on cans (pair) for 2.2″ / 56mm body Hydro Bumps
- Threaded weld can
- Zinc coating for rust prevention (Must be ground off before welding)
- 3mm walls for increased strength
- Sold in Pairs
$90.00 Add to cart -
Bump StopsShips FREE !!
within 48 US StatesDobinsons Hydro 2.6″ Bump Stops – 66mm body x 85mm stroke (Pair)
- Dobinsons HBS66-003 – 66mm body x 85mm stroke (Pair) – for 4-6″ lift heights
- CNC Machined 60mm Billet Aluminum Piston
- EDP Coated 3mm Thick 66mm Steel Body
- Threaded Body For Height Adjustment
- Supplied with both Interchangeable Super Quiet Rubber Rod End & Hard Nylon
- 66mm body x 85mm stroke
- 40mm Micro Polished Hard Chrome Shaft
- Slow Rebound Valving To Prevent Bucking
- Removable Dust Cover Boot For Stealth Appearance
- Fully Rebuildable & Tunable
- O-Ring Travel Indicator
- Heavy Duty Extreme-Race style Triple Seal Design
- Nitrogen Gas Charged & Tunable (100 to 300 PSI)
- Pre-charged to 150 PSI
- Extra Short Dead Lengths For Compact Fitment
- No mounting cans or mounting fit kit is included (sold separately)
$820.00 Add to cart -
Bump StopsShips FREE !!
within 48 US StatesDobinsons Hydro 2.6″ Bump Stops – 66mm body x 57mm stroke (Pair)
- HBS66-002 – 66mm body x 57mm stroke (Pair) – for 0-4″ lift heights
- CNC Machined 60mm Billet Aluminum Piston
- EDP Coated 3mm Thick 66mm Steel Body
- Threaded Body For Height Adjustment
- Supplied with both Interchangeable Super Quiet Rubber Rod End & Hard Nylon
- 66mm body x 57mm stroke
- 40mm Micro Polished Hard Chrome Shaft
- Slow Rebound Valving To Prevent Bucking
- Removable Dust Cover Boot For Stealth Appearance
- Fully Rebuildable & Tunable
- O-Ring Travel Indicator
- Heavy Duty Extreme-Race style Triple Seal Design
- Nitrogen Gas Charged & Tunable (100 to 300 PSI)
- Pre-charged to 150 PSI
- Extra Short Dead Lengths For Compact Fitment
- No mounting cans or mounting fit kit is included (sold separately)
$820.00 Add to cart -
Bump StopsShips FREE !!
within 48 US StatesDobinsons Hydro 2.2″ Bump Stops – 56mm body x 50mm stroke (Pair)
- HBS56-001 – 56mm body x 50mm stroke (Pair) – for 0-4″ lift heights
- CNC Machined 50mm Billet Aluminum Piston
- EDP Coated 3mm Thick 56mm Steel Body
- Threaded Body For Height Adjustment
- Supplied with both Interchangeable Super Quiet Rubber Rod End & Hard Nylon
- 56mm body x 50mm stroke
- 30mm Micro Polished Hard Chrome Shaft
- Slow Rebound Valving To Prevent Bucking
- Removable Dust Cover Boot For Stealth Appearance
- Fully Rebuildable & Tunable
- O-Ring Travel Indicator
- Heavy Duty Extreme-Race style Triple Seal Design
- Nitrogen Gas Charged & Tunable (100 to 300 PSI)
- Pre-charged to 150 PSI
- Extra Short Dead Lengths For Compact Fitment
- No mounting cans or mounting fit kit is included (sold separately)
$690.00 Add to cart -
Bump Stops
Dobinsons Hydraulic Bump Stops | 3 Sizes
- CNC Machined 50/60mm Billet Aluminum Piston
- EDP Coated 3mm Thick 56/66mm Steel Body
- Threaded Body For Height Adjustment
- Supplied with both Interchangeable Super Quiet Rubber Rod End & Hard Nylon
- Available in 3 sizes: 56mm body x 50mm stroke, 66mm body x 57mm stroke & 66mm body x 85mm stroke
- 30/40mm Micro Polished Hard Chrome Shaft
- Slow Rebound Valving To Prevent Bucking
- Removable Dust Cover Boot For Stealth Appearance
- Fully Rebuildable & Tunable
- O-Ring Travel Indicator
- Heavy Duty Extreme-Race style Triple Seal Design
- Nitrogen Gas Charged & Tunable (100 to 300 PSI)
- Extra Short Dead Lengths For Compact Fitment
From $690.00 Select options