Your cart is currently empty!
4Runner 3rd Gen (1996-2002)
Showing 31–42 of 42 results
-
4Runner 3rd Gen (1996-2002)Ships FREE !!
within 48 US StatesETA is July 2024Dobinsons 2-2.5″ Pre-Assembled MRA 4Runner Coilovers for 1996-2002
- Suits 1996-2002 Toyota 4Runner 4×4 Models
- Looking for a quick and easy way to lift your 4Runner? This is your answer
- Extended Travel MRA59-A222 Coilovers – 458mm extended, 335mm compressed lengths
- Dobinsons MRA are height adjustable by a fully threaded body
- The Dobinsons MRA Coilovers will come pre-assembled with new struts, coils and top mounts
- Fully rebuildable and re-valvable
- SOLD IN PAIRS – READY TO BOLT IN
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Includes Universal Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Photos for illustration purposes
- Instructions for setting coil seat height
- It’s recommended that these coilovers to be run with aftermarket UCA’s for coilover clearance and correct travel
- Link to matching rear shocks
$1,795.00 Select options -
4Runner 3rd Gen (1996-2002)Ships FREE !!
within 48 US StatesTimbren ABSTOR4R Active Off Road Rear Bump Stops | 1990-2002 4Runner
- Suits all 1990 to 2002 Toyota 4Runner
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation
- Satisfaction Guarantee
- Lifetime Warranty
- Click here for instructions
$269.36 Add to cart -
4Runner 3rd Gen (1996-2002)
3rd Gen 4Runner Long Range Auxiliary Fuel Tank (29gal)
- Suits 3rd Gen Toyota 4Runner 1996 to 2002 with Gasoline Engines. Also fits the international Toyota Hilux Surf (petrol only)
- 1996-2000 — No mods beyond normal
- 2001-2002 — Will require relocation of the charcoal canister
- This is an additional tank that goes behind the rear axle, it holds 29 gallons, and uses a transfer pump to fill your main tank when you hit a switch
- 29 gallon capacity, fits in the void behind the rear axle and in front of the rear bumper, requires relocation of the stock spare tire
- 29 gallons plus your original 18.5 gallon tank gives you a capacity of 47.5 gallons in total!!
- Filling of this tank is done via a new twin filler neck that replaces the original filler
- Tank uses a transfer pump to fill the main tank, 2L per minute pump rate
- No Exhaust modification required
- Spare tire must be relocated
- Fitting time – approximately 5 hours
- Usually stocked item in the US
- Part Number TSURF97A
- Intended to be installed by a certified mechanic
- This item ships on a pallet to the nearest Truck Freight terminal for you to pickup. We will be in touch with you regarding the nearest freight terminal, unless you add home delivery.
- Call or email to check and verify stock before ordering
- This product can not be sold or shipped to residents in California. Do not order this product if you live in California!!
- Installation Instructions
- **This tank is only for gasoline or petrol models. Long Range makes a different tank for the diesel, but it’s not carried in the USA
$2,245.00 Select options -
Sale!4Runner 3rd Gen (1996-2002)RCI is on Sale For Spring!!
RCI Engine Skid Plate | 96-02 4Runner 95-04 Tacoma
- Suits 3RD Gen 4Runner and 1995-2004 Tacoma Dual Cab (won’t fit regular cab)
- Protects front two cross-members, low hanging front differential, radiator, and oil pan
- Service openings for easy service and oil changes without removal
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Smooth, flat surface that easily slides over obstacles
- Black powder coat available for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Made in the USA.
Original price was: $324.00.$291.60Current price is: $291.60. Add to cart -
ExceptionsShips FREE !!
within 48 US StatesTimbren Bump Stops Front & Rear | 3rd Gen 4Runner
- Suits 1996-2002 Toyota 3rd Gen 4Runner
- Includes both Front and Rear bump stops for the whole vehicle
- Active Off-Road Bumpstops provide off-road enthusiasts greater control over their vehicles’ suspension travel. Using progressive-rate springs means that instead of a hard stop at the end of axle travel the axle energy will be absorbed when bottoming-out producing smooth, predictable, and quiet axle engagement and disengagement.
- Unlike OEM bump stops, Active Off-Road Bumpstops are made from natural rubber. Just like our Timbren SES line, Active Off-Road Bumpstops carry a lifetime warranty and a satisfaction guarantee.
- ABSTOR4R replaces the rear OEM bump stops and ABSTOF replaces the fronts on the 3rd Gen 4Runner. Upgrade to Active Off-road Bumpstops and experience the difference.
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation
- Satisfaction Guarantee
- Lifetime Warranty
- Front Instructions and Rear Instructions
$538.72 Add to cart -
Bump StopsShips FREE !!
within 48 US StatesDobinsons 2.2″ Hydraulic Bump Stop IFS Weld on Mount Kit
- Kit includes front Weld on Mounts (Pair) and Dobinsons HBS56-009 Pair of Hydro Bump Stops
- Made for IFS (independent front suspension) vehicles to replace the OEM rubber bump stop
- HBS56-009 – 56mm (2.2″) body | 46mm (1.8″) stroke | 188mm (7.4″) extended | 142mm (5.6″) compressed | 105mm (4.0″) thread length
- CNC Machined 50mm Billet Aluminum Piston
- EDP Coated 3mm Thick 56mm Steel Body
- Threaded Body For Height Adjustment
- Supplied with both Interchangeable Super Quiet Rubber Rod End & Hard Nylon
- 30mm Micro Polished Hard Chrome Shaft
- Slow Rebound Valving To Prevent Bucking
- Removable Dust Cover Boot For Stealth Appearance
- Fully Rebuildable & Tunable
- O-Ring Travel Indicator
- Heavy Duty Extreme-Race style Triple Seal Design
- Nitrogen Gas Charged & Tunable (100 to 300 PSI)
- Pre-charged to 150 PSI
- Extra Short Dead Lengths For Compact Fitment
- Universal design threaded weld on bump stop can to hold the 2.2″ body bump stop
- Cans have 3mm walls for increased strength
- Kit is ideal for those who bottom out often in their offroad driving or go really hard at high speeds
- Could suit a wide range of vehicles as listed below, but remember they are universal and will require adaptation to your vehicle and welding
- Custom fitting and welding is required
- Photo attached shows these bump stops installed with the weld-on mounts on a 3rd Gen Tacoma
From $1,090.00 Select options -
Coil Springs
Dobinsons C59-274 Front Lifted Coil Springs for Toyota 4×4 Trucks and SUV’s
- 3rd Gen 4Runner 4×4 V6 (1996-2002) – Lifts 3/4″ on a stock to medium load front end
- Toyota Tacoma 4×4 V6 1998 to 2004 – Stock height with stock weight (may vary depending on cab and bed configuration)
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 349mm free height, 586LBF/in spring rate, 17mm wire
- Sold in Pairs
$270.00 Add to cart -
Sale!4Runner 3rd Gen (1996-2002)RCI is on Sale For Spring!!
RCI Transfer Case Skid Plate | 1996-2002 4Runner
- Suits 3RD Gen Toyota 4Runner 1996-2002
- Protects third cross-member, transfer-case, and exhaust pipe
- Photos show this skid as well as others installed
- Built with 3/16″ CNC laser cut steel
- Excellent addition or replacement of weak, lightweight OEM skid plate that directly attaches to the transfer-case (this means impact will not disperse, rendering plate useless)
- Reinforced edges between cross-members for maximum strength and rigidity
- Utilizes carriage bolts for mounting, providing a low profile without the worry of damaging hardware
- Smooth, flat surface that easily slides over obstacles
- Black powder coated for rust resistant, durable and high quality finish
- Installs in minutes
- Hardware and installation instructions included
- Direct bolt on addition to existing factory attachment points, no drilling required
- Also works in conjunction with the RCI Engine and Transmission Skid Plates
- Made in the USA.
Original price was: $249.00.$224.10Current price is: $224.10. Add to cart -
Sale!4Runner 3rd Gen (1996-2002)RCI is on Sale For Spring!!
RCI Transmission Skid Plate | 96-02 4Runner 95-04 Tacoma
- Suits 3RD Gen 4Runner and 1995-2004 Tacoma V6 and 4×4 Models ONLY
- Protects transmission and second and third cross-members
- Built with laser cut 3/16″ steel
- Excellent addition or replacement of weak, lightweight OEM skid plates (which do not provide ANY coverage of transmission)
- Service openings for maintenance without removal
- Reinforced edges between cross-members for maximum strength and rigidity
- Smooth, flat surface that easily slides over obstacles
- Black powder coated for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- V6 and 4×4 Models ONLY – does not fit 4 cylinder models or 2 wheel drive
- Made in the USA.
Original price was: $249.00.$224.10Current price is: $224.10. Add to cart -
Sale!4Runner 3rd Gen (1996-2002)RCI is on Sale For Spring!!
RCI A-Arm Skid Plates | 96-02 4Runner 95-04 Tacoma
- Suits 3RD Gen 4Runner and 1995-2004 Tacoma
- Protects A-arms
- Built of 3/16” CNC laser cut steel
- Smooth, flat surface that easily slides over obstacles
- Black powder coated for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Not compatible with OEM front skid plate (without cutting OEM plate)
- Sold as a pair
- Made in the USA.
Original price was: $159.00.$143.10Current price is: $143.10. Add to cart -
BrakesShips FREE !!
within 48 US StatesPowerbrake X-Line 4×4 3rd Gen 4Runner Big Brake Kit Stage 1 1996-2002
1996-2002 3rd Gen 4Runner Big Brake Kit Includes:
- X-Line billet 6-piston off-road calipers (pair)
- High-performance brake pads, pre-loaded into the calipers
- 1-Piece 350mm x 34mm (13.77″ x 1.33″) 48-vane discs
- Curved, directional cooling vanes
- Billet caliper mounting brackets
- Stainless steel braided brake lines
- All necessary mounting hardware for quick, easy bolt-on installation
- Comprehensive fitment and bed-in instructions
- Now Includes Upgraded Powerbrake Pads, PB05 Compound – highest level 4×4 brake pads available – made in Japan
- Manufactured, finished and packaged 100% in South Africa
- REQUIRES 17″ WHEELS FOR ADEQUATE CALIPER CLEARANCE
$2,675.00 Select options
