Your cart is currently empty!
Hilux Revo (2016+)
Showing 1–30 of 35 resultsSorted by popularity
-
4Runner 4th Gen (2003-2009)Dobinsons Strut Top Plates Pair | Tacoma 05-23 4Runner 03-24 FJ Cruiser GX470 GX460
- Suits Toyota Tacoma 2005-23, Toyota 4Runner 2003-24, Toyota FJ Cruiser (all years), Toyota Prado 120, Toyota Prado 150, Toyota Hilux 2005-2023, Lexus GX470, Lexus GX460
- Designed to exact OE specs, using all new rubber bushes, washers and seats
- New zinc coated hardware for corrosion resistance
- Allows faster assembly of new components, not needing to disassemble used parts
- Enough for 1 vehicle, sold as pairs
- Product comes exactly as shown in the photo
- Nut size – M10 x 1.25 nylock – easy to find locally to you if you lose or damage one
- Can also add the labor to have struts, coils, and these top mounts assembled, click here to add that
- Installation instructions
(18 reviews) -
DobinsonsDobinsons Greasable Bolt Pair | Ford Nissan and Toyota (SP59-060)
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Kit includes 2 greasable bolts, as shown in the photo
- Order 2 kits if you want to replace fixed and shackle end bolts
- Suits Toyota Tundra and Tacoma as well as Nissan Frontier D40 and D41, Ranger 2019+. See full vehicle list below
(12 reviews) -
4Runner 4th Gen (2003-2009)
Dobinsons Front IFS Diff Drop Kit | Tacoma 4Runner FJ Cruiser GX470 GX460
- Suits 2005-23 Toyota Tacoma, 2003-2024 4Runner, 2007-16 FJ Cruiser, Lexus GX470, GX460
- Keeps CV angles at a good working angle
- Suitable for lifts over 2.0″. There’s really no benefit to adding them if there’s less lift than 2.0″
- Includes all necessary hardware, including machined spacers and nuts/bolts
- Includes 2 different lengths of the long bolts as some vehicles need them longer than others
- Compliments Dobinsons 3″ lifts for IFS Toyota and Lexus vehicles
- Simply remove the front skid plate, remove the 2 long bolts at the front of the diff, install the spacers and long bolts supplied, install the skid plate spacers and longer bolts supplied while reinstalling the skid plate
- Note: Some aftermarket skid plates have spacers built-in so the small spacers aren’t necessary, and some skid plates may use larger bolts to install it to the vehicle, requiring modification to the supplied spacers
- Installation Instructions
(17 reviews) -
4Runner 4th Gen (2003-2009)FREE SHIPPING
within 48 US StatesDobinsons IMS59-50220 Extended Travel Front 2.2″ IFP Struts Pair | Toyota & Lexus
- Suits 2nd and 3rd Gen Tacoma 2005-2023, 4th Gen 4Runner 2003-2009, Early FJ Cruiser 2006-2009, Lexus GX470 2003-2009
- Fully rebuildable and re-valvable
- Extended Travel – 567mm extended, 417mm compressed
- SOLD IN PAIRS
- Adjustable height through fully threaded body
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
(15 reviews) -
Suspension
Dobinsons GS59-220 Pair of Extended Travel Front Struts | Toyota + Lexus
- Suits 2005 to 2023 Toyota Tacoma 4×4, Toyota FJ Cruiser from 2006 to 2009, Toyota 4Runner 2003 to 2009 4th Gen, and Lexus GX470
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Adds 1″ of lift due to the raised coil seat height
- Dobinsons GS59-220 Specification: 558mm extended, 435mm compressed, 50mm body, 226mm coil seat height
- Available in Yellow or Black
(6 reviews)$350.00 Select options This product has multiple variants. The options may be chosen on the product page -
TimbrenFREE SHIPPING
within 48 US StatesTimbren ABSTOF Active Off Road Front Bump Stops | Toyota and Lexus
- Suits 2000-2024 Tundra, 2001-2024 Sequoia, 2005-2023 Tacoma, 1990-2024 4Runner, FJ Cruiser, Lexus GX470 and GX460, Landcruiser 100 and 200 Series
- Also Suits Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- Note: Some 2nd Gen Toyota Sequoia models have 2 sets of front bump stops, so ordering 2 of these kits will be necessary to replace them all. Inspect your vehicle before ordering
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation – Installation Video
- Satisfaction Guarantee
- Lifetime Warranty
- Click here for instructions
(12 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesETA is late DecemberDobinsons Tubular UCA Pair | Tacoma Hilux Fortuner 2005-23
- Suits Toyota Tacoma from 2005 to 2023, Toyota Hilux Vigo and Revo from 2005+, and Toyota Fortuner 2005 to 2023
- Complete assembled kit for both left and right hand side, includes new ball joints, ball joint caps, OE style rubber frame bushings, and washers
- Has 3 degrees of caster built in, no adjustability or settings required
- Has more clearance around the ball joint than factory UCA’s for better tire clearance
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Works for any lift height of 1.5″ or more. Any height less than that, a proper wheel alignment may not be able to be achieved
- Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
- Product Video
- Also sold without ball joints
- Replacement Ball Joints can be ordered Here
(9 reviews) -
Bump Stops & SpacersFREE SHIPPING
within 48 US StatesDobinsons BS59-560 Front Adjustable Bump Stop Pair
- Adjustable front soft hit bump stop made from high quality rubber
- Suits 0-30mm Extension
- The BS59-560 rubber only is 1-3/8″ (35mm) thick, and the included spacers are 5, 10, 20mm
- Sold as a pair, replacing two front bump stops
- Ideal for those who bottom out often in their offroad driving
- Suits Tacoma, 4Runner, GX470, GX460, 200 Series & more (see below for full vehicle list)
- Installation Instructions
(10 reviews) -
Upper Control ArmsFREE SHIPPING
within 48 US StatesDobinsons Billet Aluminum Adjustable UCA’s Pair | Toyota Tacoma 2005-23
- Super strong billet aluminum front upper control arms (UCA’s) for Toyota Trucks and SUV’s
- Suits 2005-2023 Toyota Tacoma, 2005+ Toyota Hilux, 2005+ Toyota Fortuner
- Complete kit for both left and right hand side, fully assembled with ball joints pressed in
- OE-style sealed ball joints for a maintenance free life
- OE-style high quality rubber bushings for maximum NVH dampening and longevity
- No greasing or maintenance required at all, completely noise-free operation
- Adjustable on-vehicle for quick and easy alignment.
- Adjustable Camber and Caster for perfecting the vehicle’s handling
- O-ring sealed ball joint cap for protection against the elements
- Works for any lift height of 1.5″ or more
- Installation Instructions
- We recommend visiting an offroad specific shop for alignment, a regular alignment shop may not be able to adjust and align properly due to the added adjustability these arms offer
- Replacement Ball Joints can be ordered Here
(9 reviews) -
Replacement Bushings
Dobinsons Upper Strut Bushing Kit – For -222 -221 -220 -574 -700
- Dobinsons replacement upper strut bushing kit with washers
- Suits a variety of Dobinsons struts, part numbers ending in -222 -221 -220 -574 -700
- Full list of part numbers this fits is below
- This is for 2 upper bushings and washers only for 1 strut or shock
- High quality natural rubber bushing
- Photo for illustration purposes
(0 reviews) -
Replacement Bushings
Dobinsons Lower Strut Bushing – For -222 -220 -221 -782 -470
- Dobinsons replacement lower strut bushing
- Suits a variety of Dobinsons struts/shocks, part numbers ending in -222 -220 -221 -782 -470
- Full list of part numbers this fits is below
- This is for a single bushing only for 1 strut or shock
- High quality natural rubber bushing
- Photo for illustration purposes of the bushing type
(0 reviews) -
Suspension
Dobinsons 2″ Rear Lift Blocks – Quick Ride Kit – Tacoma Tundra Hilux Frontier
- High Quality cast steel lift blocks/spacers, painted black
- Extended length u-bolts, zinc coated
- Fast and simple to install
- New extended length rear shocks are recommended
- Only to be used with OE height leaf springs
- Suits all Toyota Tacoma’s from 1998 to 2023 and Tundra’s from 2000 to 2021
- Suits all Toyota Hilux from 2005 to 2023
- Suits all Nissan Frontier D21, D22, D40, D41 from 1985 to 2022+
- Installation Instructions
(7 reviews) -
Sale!15% off Year End SaleTrail-Gear
TG Diff Drop Kit – 05+ Tacoma 03+ 4Runner FJ Cruiser GX470 GX460
- Solid aircraft-grade 6061-T6 aluminum spacers
- Zinc-plated Grade 8 hardware
- Aluminum spacers and longer zinc-plated Class 8.8 bolts to move the stock skid plate down
- TRD Pro models may require different length bolts due to variations from Toyota
- Fits the following applications:
- Toyota Tacoma 2005-2023 (All Engines)
- Toyota FJ Cruiser 2007-2014 (All Engines)
- Toyota 4Runner 2003-2024 (All Engines)
- Lexus GX470 (all years)
- Lexus GX460 (all years)
- Toyota Hilux Vigo (all years)
- Toyota Hilux Revo (all years)
- Toyota Fortuner (all years)
- Made in USA
(9 reviews) -
Dobinsons
Dobinsons C59-318 Front Lifted Coil Springs for Toyota 4×4 Trucks
- 3.0″ Lift – Toyota Tacoma 2005-2023 Heavy Load 110-240LBS (varies by accessory weight and shocks used)
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 395mm, 18mm wire, 730LB Rate
(0 reviews)$270.00 Select options This product has multiple variants. The options may be chosen on the product page -
Sale!15% off Year End SaleUpper Control Arms
Pair of UCA Pivot Bolts and Nuts | Toyota and Lexus
- This is a pair of factory size upper control arm pivot bolts and nuts replacements to service two control arms
- Commonly referred to “as the long UCA bolt”
- Services both control arms at once
- Does not come with any washers. New aftermarket UCA’s usually come with the necessary washers
- Vehicle Fitment
-
- 2003-2009 Toyota 4Runner
- 2010-2024 Toyota 4Runner
- 2005-2015 Toyota Tacoma
- 2016-2023 Toyota Tacoma
- 2006+ FJ Cruiser (all years)
- 2003-2009 Lexus GX470
- 2010-2023 Lexus GX460
- Toyota Hilux Vigo
- Toyota Hilux Revo
- Toyota Fortuner
- Toyota Prado 120
- Toyota Prado 150
- Bolt Grade: 10.9
- Head Drive Type: Hex
- Length: 351 mm
- Material: Steel
- SAE or Metric: Metric
- Thread Diameter: 14 mm
- Thread Length: 28.7 mm
- Thread Size: 14 mm
- Thread Type: Fine
(4 reviews) -
Suspension
Dobinsons Tubular UCA Pair | Tacoma Hilux Fortuner 2005-23 – No Ball Joints
- Includes left and right hand side upper control arms, includes ball joint caps, OE style rubber frame bushings (installed), and washers
- This does NOT include any ball joints – use aftermarket or OEM original sized upper ball joints
- Has 3 degrees of caster built in, no adjustability or settings required
- Has more clearance around the ball joint than factory UCA’s for better tire clearance
- Made from HSLA (High Strength Low Alloy) Steel
- 5mm (0.2″) wall thickness
- Powder coated black
- Works for any lift height of 1.5″ or more. Any height less than that, a proper wheel alignment may not be able to be achieved
- Product Video
- Also available with ball joints installed, here
(8 reviews) -
DobinsonsFREE SHIPPING
within 48 US StatesDobinsons IMS59-50229 Monotube 2.2″ IFP Rear Shocks Pair
- Suits the rear of Toyota Hilux Revo 2016+ and Toyota Tacoma 1998-2004 (for long travel)
- For the Tacoma, these are considered long travel shocks for maximum droop. Additional parts may be required to get that travel out of the truck, such as bump stop extensions, longer brake lines, etc
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Dobinsons IMS59-50229 Specifications: 650mm extended, 416mm compressed, 56mm body size
(11 reviews) -
Roof Racks
RCI 12″ HD Low Profile Truck Bed Rack
- For Short Bed Trucks from 46-58″ in Bed Length
- For Trucks Such As: Jeep Gladiator, Toyota Tacoma, Nissan Frontier, Ford Ranger, Chevy Colorado, GMC Canyon, Ford F150, Toyota Tundra, etc
- Rack is 12″ tall from bed rail to top of rack
- Mount anything from lights, Hi-lift, co2, fire extinguisher, quick-fist, roto-pax, spare tire, roof top tent, etc
- This is our HD model, utilizing three cross-members spanning the truck bed, this rack is has the highest weight capacity and provides even weight distribution on the trucks bed side rails
- Built in mounting points allow unlimited options for adding accessories
- Bolts to inside of bed rails or can alternatively be mounted with optional “drill-free” clamps to mount like a truck topper (Not applicable when bolting to accessory rail systems)
- Rack is 12″ tall from bed rail to top of rack
- Adjustable width adapts to any truck bed from 54″ – 64″ width between the bed rails
- Three length options to fit any application from 5′ beds to 6’+
- Maintains very good visibility through the back window despite the low overall rack height
- Using this rack will minimize the aerodynamic drag normally associated with roof top tents by keeping it largely below the roof-line
- Slotted mounting points on top of rack accept nearly any roof top tent making mounting a breeze
- Includes TWO top braces, for unlimited accessory and tent mounting options
- Heavy duty black textured powder coat finish comes standard, plus we take it a step further and coat all racks with an epoxy primer. This extra step is expensive and time consuming but ensures our paint job will outlast anything else in the industry!
- Easy bolt together assembly, takes about 45 minutes to install with only a few basic hand tools
- All hardware for installation is included
- Weights
- 5ft (46″) 86lbs
- 5ft6in(52″) 92lbs
- 6ft(58″) 96lbs
- Adjustable Bedrack Install Guide
- Made in Loveland, Colorado USA
(2 reviews) -
Differential | DrivetrainFREE SHIPPING
within 48 US StatesARB RD111 Front Air Locker Toyota Lexus 8″ IFS 30 Spline 3.91+
- For Use With Toyota 8″ IFS Clamshell differential with 30 Spline Axles and 3.91 And Up FactoryGears
- Usually all models that came with an automatic transmission used 3.91+ gear ratios, but some more modern Toyota and Lexus use 3.73 gears from the factory
- Factory R&P may use either RD111 or RD121 depending on ratio. All known aftermarket R&P sets suit RD121.
- If you are changing to aftermarket gears, check with that gear manufacturer on which gears to order
- Full vehicle fitment list is further down in the main description, includes 4Runner, Tacoma, FJ Cruiser, GX470, GX460
- At the flick of a dash-mounted switch, compressed air is delivered to the seal housing assembly via a nylon air line.
- Instantaneously go from an open differential to a fully locked differential at the flick of a switch for maximum traction
- Requires an Air Compressor for operation, Sold Separately
- Why do they use air? Air is used on every semi truck on the road to reliably operate their brakes through solenoids, and ARB uses the same technology. When installed correctly, it’s ultra-reliable!!
- The ARB Air Locker is a pneumatic locking differential that uses air to facilitate the locking of both axles. This action converts your differential from a conventional open to a full spool type axle supplying 100% power to both wheels to keep you going through the worst terrain.
- This Air Locker kit includes the full differential, instruction booklet, airline, fittings, switch and cover, and necessary seals. When combined with an Air Compressor and the original differential, you’ll have everything you need as far as parts go.
- Full specification sheet, including all included parts, CLICK HERE
- It’s recommended that a qualified differential mechanic do the installation for proper setup
- Covered by a full manufacturer’s 5 YEAR WARRANTY
(11 reviews) -
Dobinsons
Dobinsons UCA Ball Joint Cap Cover for Tubular UCA’s
- Suits all Dobinsons Tubular UCA’s
- Fits the UCA’s made for Tacoma, 4Runner, GX470, GX460, LC100, LC200, Ranger, Hilux, Fortuner
- Machined ball joint cap with o-ring to seal the top of a ball joint
- Black with Dobinsons logo engraved in it
- Sold individually
(6 reviews) -
Sale!Roof RacksFREE SHIPPING
within 48 US StatesOVS Cab Height Mid Size Short Bed Truck Discovery Rack
- For Short Bed Trucks Up To 5.5FT in Length with Tie Down Bed Rails
- For Trucks Such As: Jeep Gladiator, Toyota Tacoma, Nissan Frontier D21 & D40, Ford Ranger, Chevy Colorado, GMC Canyon, etc
- Heavy Duty 2” Square Top Rails are Adjustable
- No Holes to Drill Installation
- Multiple Tie Down Points
- Full Length Rails with Integrated Tie Downs
- Removable Shelf to Store Items like Propane Bottle, CO2 Tanks, Air Compressors, etc.
- Side Mounting Plates with Integrated Mole Mounting Holes to Mount Gas Cans, Water Cans, Jacks, Recovery Ramps, etc.
- Easily Mount Roof Top Tents and Awnings
- Crossbar Length 51.25”
- Accessory Plate Length 41”
- Overall Length 57”
- Overall Height 33”
- Marine Grade Stainless Steel Hardware
- 2 Stage Black Powder Coat
- T-Slot Bars are 4 Sided
- Heavy Duty Welded Corners
- Dynamic Weight Capacity: 450lbs
- Static Weight Capacity: 1350lbs
- Brand: Overland Vehicle Systems
- Limited Lifetime structural warranty and five-year finish warranty
- Installation Instructions
(8 reviews) -
Differential | DrivetrainFREE SHIPPING
within 48 US StatesARB RD121 Front Air Locker Toyota Lexus 8″ IFS 30 Spline 3.73-
- For Use With Toyota 8″ IFS Clamshell differential with 30 Spline Axles and 3.73 And Down Factory Gears
- Usually all models that came with a manual transmission used 3.73- factory gear ratios, but you must check before ordering
- Factory R&P may use either RD111 or RD121 depending on ratio. All known aftermarket R&P sets suit RD121.
- If you are re-gearing, check with the gear manufacturer for which Air Locker to order
- Full vehicle fitment list is further down in the main description, includes 4Runner, Tacoma, FJ Cruiser, GX470, GX460
- At the flick of a dash-mounted switch, compressed air is delivered to the seal housing assembly via a nylon air line.
- Instantaneously go from an open differential to a fully locked differential at the flick of a switch for maximum traction
- Requires an Air Compressor for operation, Sold Separately
- Why do they use air? Air is used on every semi truck on the road to reliably operate their brakes through solenoids, and ARB uses the same technology. When installed correctly, it’s ultra-reliable!!
- The ARB Air Locker is a pneumatic locking differential that uses air to facilitate the locking of both axles. This action converts your differential from a conventional open to a full spool type axle supplying 100% power to both wheels to keep you going through the worst terrain.
- This Air Locker kit includes the full differential, instruction booklet, airline, fittings, switch and cover, and necessary seals. When combined with an Air Compressor and the original differential, you’ll have everything you need as far as parts go.
- Full specification sheet, including all included parts, CLICK HERE
- It’s recommended that a qualified differential mechanic do the installation for proper setup
- Covered by a full manufacturer’s 5 YEAR WARRANTY
(12 reviews) -
Rear DrawersFREE SHIPPING
within 48 US StatesOVS Slide Out Bed Extension for 5.0FT Short Bed Trucks
- Suits 5.0FT Short Bed Mid-Size Trucks
- Mid Size Short Bed 5.0′: 57.08″ long x 42.12″ wide x 7.28″ tall
- Potential Vehicle Fitments (Measure your truck bed first!!): Tacoma, Frontier, Gladiator, Ranger, Hilux, Colorado
- These are made in 3 different sizes. Mid-Size Truck 5.0Ft Long, Full Size Truck 5.5FT Long and Full Size Truck 6.5FT Long
- 75% Extension Bed Cargo Slide
- 1250 LBS. Max Load Capacity
- Steel Frame Construction
- 304 Stainless Steel Hardware
- Single Pull Latch for Easy Operation
- Multiple Anchor Points for Cargo Security
- Great for camping, easily slide out all your gear
- Excellent for work use, keep your tools and heavy objects organized, then slide them out easily to reach them
- Perfect for people with truck caps or canopies, easier to reach the parts out of the truck
- Some photos show the different sized models
(0 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesApache Offroad Assembled Tubular UCA Pair | Tacoma 2005-2023
- Suits Toyota Tacoma from 2005 to 2023
- Complete assembled kit for both left and right hand side, includes new Moog ball joints, ball joint caps, rubber frame bushings
- Has 3 degrees of caster built in, no adjustability or settings required
- Has more clearance around the ball joint than factory UCA’s for better tire clearance
- Manufactured from Black Powder coated 1.5″ Steel Tube
- The Apache UCAs Feature Hardened Rubber Bushings for a quiet ride
- Comes assembled with OE sized Greaseable Moog Problem Solver Ball Joints
- Includes Machined Aluminum Dust Covers with dust seals
- Works for any lift height of 2.0″ or more. Any height less than that, a proper wheel alignment may not be able to be achieved
- Do not forget to grease your ball joints 🙂 They do not come pre-greased.
- Product Video
(10 reviews) -
Sale!Overland Vehicle Systems (OVS)FREE SHIPPING
within 48 US StatesLD TACT Truck Bed Tent – Mid-Size Truck 5.0FT Bed
- For Mid-Size Truck Beds measuring 5.0-5.2 FT in length
- For Vehicles such as Chevy Colorado, Ford Ranger, GMC Canyon, Nissan Frontier, Toyota Tacoma
- 2-3 Person Design with Spacious Interior and Headroom
- Perimeter Skirt and Reinforced Floor Keeps Truck Bed Dry
- Color Coated Poles for Quick Deployment
- Large Windows with Mesh Allows for Ventilation
- Premium 420D Material with Removable Rainfly
- Padded Elastic Anchor Points for Easy Scratch-Free Fit
- Compact Carrying Bag is Included
- Internal Storage Options
- Setup Instructions
- This truck bed tent style is made in 3 sizes, 5FT, 5.5FT and 6.0FT Truck Beds
(3 reviews) -
DobinsonsETA is late December
Dobinsons UCA Ball Joint for Tacoma Hilux and Fortuner
- Suits Dobinsons UCA’s that fit Toyota Tacoma 2nd and 3rd Gen, Toyota Fortuner 2005-2023, Toyota Hilux 2005-2023
- This ball joint will fit UCA part numbers UCA59-003K, UCA59-203K
- Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
- Sold individually
- Includes new ball joint, boot, split pin and nut (subject to design changes)
(6 reviews) -
Roof Racks
RCI Low-Pro Truck Bed Bars
- Super low profile (low pro) bed rack set to mount all sort of gear or a Roof Top Tent
- For Trucks Such As: Jeep Gladiator, Toyota Tacoma, Nissan Frontier, Ford Ranger, Chevy Colorado, GMC Canyon, Ford F150, Toyota Tundra, etc
- Utilizing 2 crossmembers spanning the truck bed, these bed bars have a high weight capacity and provide even weight distribution on the trucks bed side rails
- Bolts to inside of bed rails or can alternatively be mounted with optional “drill-free” clamps to mount like a truck topper (Not applicable when bolting to accessory rail systems)
- Bars are 3.5″ tall from bed rail to top of bars
- Adjustable width adapts to any truck bed from 54″- 69″ width between the bed rails
- Can be positioned up to 58″ apart (front to back)
- Using these bars will minimize the aerodynamic drag normally associated with roof top tents by keeping it below the roof-line
- Slotted mounting points on top of rack accept nearly any roof top tent making mounting a breeze
- Heavy duty black textured powder coat finish comes standard, plus we take it a step further and coat all racks with an epoxy primer. This extra step is expensive and time consuming but ensures our paint job will outlast anything else in the industry!
- Easy bolt together assembly, takes about 15 minutes to install with only a few basic hand tools
- All hardware for installation is included
- INSTALL GUIDE
- Made in Loveland, Colorado USA
(5 reviews) -
Upper Control ArmsFREE SHIPPING
within 48 US StatesIcon Tubular UCA DJ Kit Pair for 2005-2023 Tacoma
- Suits 2005-2023 Toyota Tacoma 4×4, Hilux and Fortuner
- Features patented ICON Delta Joint (U.S. Pat. 10,731,700)
- 1026 DOM Steel Construction
- CNC Bent Tubing
- Serviceable Dual Stage Bushings
- CNC Machined Bushing Housings and Sleeves
- Built-In Caster Correction
- Black Semi-Gloss Powder Coat Finish
- Installation Guide
- Warranty Info
(11 reviews) -
Upper Control ArmsFREE SHIPPING
within 48 US StatesIcon Billet UCA DJ Pair for 2005-2023 Tacoma
- Suits 2005-2023 Toyota Tacoma 4×4, Hilux and Fortuner
- Features patended ICON Delta Joint (U.S. Pat. 10,731,700)
- CNC Machined 6061 Billet Aluminum Construction
- High-Quality PTFE-lined ¾” FK Rod Ends
- On-Vehicle Adjustable For Quick And Precise Alignment
- Caster and Camber Adjustability Allows For Fine Tuning Of Vehicle Handling
- Matte Anodized Finish Provides Exceptional Corrosion Resistance
- O-ring Sealed Delta Joint Cover Cap For Additional Protection From The Elements
- Installation Guide
- Warranty Info
(11 reviews) -
Bump Stops & SpacersFREE SHIPPING
within 48 US StatesDobinsons 2.2″ Hydraulic Bump Stop IFS Weld on Mount Kit
- Kit includes front Weld on Mounts (Pair) and Dobinsons HBS56-009 Pair of Hydro Bump Stops
- Made for IFS (independent front suspension) vehicles to replace the OEM rubber bump stop
- HBS56-009 – 56mm (2.2″) body | 46mm (1.8″) stroke | 188mm (7.4″) extended | 142mm (5.6″) compressed | 105mm (4.0″) thread length
- CNC Machined 50mm Billet Aluminum Piston
- EDP Coated 3mm Thick 56mm Steel Body
- Threaded Body For Height Adjustment
- Supplied with both Interchangeable Super Quiet Rubber Rod End & Hard Nylon
- 30mm Micro Polished Hard Chrome Shaft
- Slow Rebound Valving To Prevent Bucking
- Removable Dust Cover Boot For Stealth Appearance
- Fully Rebuildable & Tunable
- O-Ring Travel Indicator
- Heavy Duty Extreme-Race style Triple Seal Design
- Nitrogen Gas Charged & Tunable (100 to 300 PSI)
- Pre-charged to 150 PSI
- Extra Short Dead Lengths For Compact Fitment
- Universal design threaded weld on bump stop can to hold the 2.2″ body bump stop
- Cans have 3mm walls for increased strength
- Kit is ideal for those who bottom out often in their offroad driving or go really hard at high speeds
- Could suit a wide range of vehicles as listed below, but remember they are universal and will require adaptation to your vehicle and welding
- Custom fitting and welding is required
- Photo attached shows these bump stops installed with the weld-on mounts on a 3rd Gen Tacoma
(0 reviews)
