200 Series Land Cruiser ARMORED
Showing 1–30 of 45 resultsSorted by popularity
-
TimbrenTHIS SHIPS FREE
within 48 US StatesTimbren ABSTOF Active Off Road Front Bump Stops | Toyota and Lexus
- Suits 2000-2026 Tundra, 2001-2026 Sequoia, 2005-2023 Tacoma, 1990-2024 4Runner, FJ Cruiser, Lexus GX470 and GX460, Landcruiser 100 and 200 Series, Lexus LX470 and LX570, 2024+ Land Cruiser 250 and Lexus GX550
- Also Suits Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95, Prado 120 and 150
- Note: Some 2nd Gen Toyota Sequoia models have 2 sets of front bump stops, so ordering 2 of these kits will be necessary to replace them all. Inspect your vehicle before ordering
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation – Installation Video
- Satisfaction Guarantee
- Lifetime Warranty
- Click here for instructions
(12 reviews) -
200 Series Land Cruiser (2008-2021)Dobinsons 1/2″ Lift Alloy Strut Spacer | Toyota Land Cruiser Tundra Sequoia
- A 1/4″ spacer at the strut equals approximately 1/2″ lift at the wheel
- Designed to exact OE top mount specs
- T-6061 aircraft grade alloy, machined then black anodized for corrosion resistance
- Allows quick method of correcting a vehicle lean without complete strut disassembly
- Sold individually
- Suits the following vehicles:
- Toyota Land Cruiser 200 Series – all years
- Toyota 300 Series Land Cruiser
- Lexus LX570 – all years
- Toyota Tundra – 2007 to 2021
- Toyota Tundra 2022+
- Toyota Sequoia – 2008 to 2022
- Toyota Sequoia 2023+
- Make sure you have enough threads on the studs of your strut mounts to add this 1/4″ thick spacer before ordering. Some top mounts have less thread length than others!!
(19 reviews) -
DobinsonsDobinsons DD59-530K Front Diff Drop Kit | Tundra Sequoia Land Cruiser
- Suits 2007-2021 Toyota Tundra, 2008-2022 Toyota Sequoia and 2008-2021 Toyota Land Cruiser 200 Series
- Keeps CV angles at a good working angle when lifted
- Suitable for lifts over 2.0″
- Includes all necessary hardware
- Compliments Dobinsons 2″+ lifts for IFS Toyota vehicles
- Installation Instructions
(16 reviews) -
200 Series Land Cruiser (2008-2021)Dobinsons SC59-006 Pair of Strut Top Plates | Land Cruiser 200 Series 2008-21
- Designed to exact OE specs, using all new rubber bushes, washers and seats
- New zinc coated hardware for corrosion resistance
- Allows faster assembly of new components, not needing to disassemble used parts
- Enough for 1 vehicle, sold as pairs
- Product is exactly the same as photo attached
- Assembly Instructions
(9 reviews) -
200 Series Land Cruiser (2008-2021)THIS SHIPS FREE
within 48 US StatesDobinsons Tubular UCA Pair | Toyota Land Cruiser 200 Series + Lexus LX570 2008-21
- Complete assembled kit for both left and right hand side, includes new ball joints, OE style rubber frame bushings, and washers
- These arms come fully assembled with the ball joints and bushings installed
- Has 3 degrees of caster built in, no adjustability or settings required
- Has more clearance around the ball joint than factory UCA’s for better tire clearance
- Made from HSLA (High Strength Low Alloy) Steel
- 5mm (0.2″) wall thickness
- Powder coated black
- Works for any lift height of 1.5″ or more. Any height less than that, a proper wheel alignment may not be able to be achieved
- Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
- Product Video
- Replacement Ball Joints can be ordered here
(8 reviews) -
All Pro OffroadTHIS SHIPS FREE
within 48 US StatesAll Pro Complete CV Boot Kit | Tundra 07-21 + Sequoia 08-22 + 200 Series 08-21
- Complete CV boot replacement kit – Suits Toyota Tundra 2007-2021, Toyota Sequoia 2008-2022, and Toyota Land Cruiser 200 Series and Lexus LX570 2008-2021
- Includes inner and outer OEM-Style CV boots and all related clamps.
- Qty 2 – OEM-Style Neoprene Outer CV Boots
- Qty 2 – OEM-Style Neoprene Inner CV Boots
- Qty 4 – CV Grease Packets
- Qty 8 – Ear-Type CV-Joint Clamps
- Qty 2 – Axle C-Clips and Snap Rings
- Qty 1 – CV Clamp Crimp Pliers
(15 reviews) -
200 Series Land Cruiser (2008-2021)Dobinsons Rear Adjustable Panhard Rod | Land Cruiser 200 250 300 GX550 4Runner
- Suits the following vehicles:
- Toyota Land Cruiser 200 Series 2008-2021
- Toyota Tundra 2022+
- Toyota Sequoia 2023+
- Toyota Land Cruiser 300 Series 2022+
- Toyota Land Cruiser 250 Series 2024+
- Lexus GX550 2024+
- Lexus LX600 2022+
- Toyota 4Runner 2025+
- Replaces OE Rear Panhard Rod, adjustable to suit lift height
- Zinc plated steel and E-coated with high quality rubber bushes supplied
- Off-car adjustable, cannot be set while fully installed – this is a safety feature, so that the length can’t change if the lock nut gets loose
- For 35mm (1.25″) of lift or more
- Rubber Bushes installed and offer greater flexibility than polyurethane, providing maximum articulation
- Panhard rod measures 41″ compressed and can be extended up to 44″ eye to eye
(15 reviews) - Suits the following vehicles:
-
200 Series Land Cruiser (2008-2021)THIS SHIPS FREE
within 48 US StatesTimbren Active Off Road Toyota Land Cruiser 200 Series Rear Bump Stops 2008-2021
- Suits 2008 to 2021 Toyota Landcruiser 200 Series and Lexus LX570 Rear End
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation
- Satisfaction Guarantee
- Lifetime Warranty
- Click here for instructions
(12 reviews) -
200 Series Land Cruiser (2008-2021)Dobinsons Adjustable Rear Lower Trailing Arms Pair | Toyota + Lexus
- Suits all 200 Series Land Cruisers from 2008-2021, 300 Series Land Cruiser, 2023+ Toyota Sequoia, 2024+ Land Cruiser 250 Series, Lexus GX550 and 2025+ 4Runner
- Comes with high quality rubber OE style bushings installed for maximum flexibility, and zero noise
- Made from HSLA (High Strength Low Alloy) Steel
- 40mm OD and 6mm wall thickness with support brace
- Oversized adjusters and rod thickness for maximum strength and durability with double-nut locking feature
- Zinc plated, then E-coated black, for the ultimate finish and protection
- Sold as a pair
(4 reviews) -
Sale!
SPCSPC 25465 | UCA’s for Toyota Land Cruiser 200 Series & LX570 2008-2021 Pair CLEARANCE
- Suits all Toyota Land Cruiser 200 Series and Lexus LX570 models – 2008-2021
- THIS ITEM IS ON CLEARANCE AND CAN’T BE RETURNED
- Improved clearance to get around the spring bucket
- 80° of articulation in its ball joint
- SPC’s arm gives you maximum droop travel.
- SPC’s arms have +1° of caster built into them
- Arm will get you 0° to +4° of caster and ±2° of camber
- Maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming
- Installation Instructions
- We offer replacement ball joints as well
(10 reviews) -
200 Series Land Cruiser (2008-2021)
Toyota Land Cruiser 200 Series 2008-2021 Long Range Auxiliary Fuel Gas Tank (12.5gal)
- Suits Toyota Landcruiser 200 Series 2008-2021 with the gas engine, also suits the Lexus LX570 of the same years
- This is an additional tank that goes above the factory spare tire, it holds 12.5 gallons, and uses a transfer pump to fill your main tank when you hit a switch
- 12.5 gallon capacity, fits above where OE spare tire sat (does NOT require spare tire relocation) for maximum rear clearance!!
- 12.5 gallons plus your original 25 gallon tank gives you a capacity of 37.5 gallons in total!!
- Tank fills using the OEM gas door and supplied parts, including a dual filler neck
- Fill either your regular tank or your AUX tank
- Tank uses a transfer pump to fill the main tank, 2L per minute pump rate
- No Exhaust modification required
- Fitting time – approximately 10-12 hours
- Part Number TLC200SA-12.5G
- Fitting Instructions – Intended to be installed by a certified mechanic
- Installation video further down the page
- This item ships on a pallet to the nearest Truck Freight terminal for you to pickup. We will be in touch with you regarding the nearest freight terminal, unless you add home delivery.
- This product can not be sold or shipped to residents in California. Do not order this product if you live in California!!
- MADE IN AUSTRALIA
- Nearest Freight Terminal Finder – Use this to decide if you want home delivery or pickup at the nearest terminal
- See legal notice at the bottom of the page
(5 reviews) -
200 Series Land Cruiser ARMOREDDobinsons C59-567 B7 1200-1300KG Armored Land Cruiser 200 Series Rear Coils – Pair
- C59-567 – Level B7 Armor with 1200-1300KG of additional weight over stock – 200 Series Land Cruiser
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish.
- Sold as a Pair – marked side specific for installation
- 455/480mm free height, 392LBF/IN Spring Rate
(3 reviews) -
200 Series Land Cruiser ARMOREDDobinsons Rear Monster Shocks Pair for Armored Land Cruiser 200 Series XHD
- Made for Armored Vehicles ONLY – Level B6 or B7 Armored Toyota Land Cruiser 200 Series
- Mammoth 70mm body housing with a massive volume of high quality German shock oil
- 20mm Diameter heavy duty chrome piston rods
- 45mm Extra Large Pistons
- 4mm Heavy Duty Wall thickness, double the thickness of regular shock walls
- Threaded adjustable spring seat height for adjustment and additional heat dissipation
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- See all suitable armored coil spring options HERE
- Sold in Pairs
(9 reviews) -
200 Series Land Cruiser (2008-2021)
Toyota Land Cruiser 200 Series 2008-2021 Long Range Auxiliary Fuel Gas Tank (40gal)
- Suits Toyota Landcruiser 200 Series 2008-2021 with the gas engine, also suits the Lexus LX570 of the same years
- THIS IS A SPECIAL ORDER TANK, WOULD TAKE 4-6 MONTHS TO BRING FROM AUSTRALIA
- This is an additional tank that goes where the factory spare tire sat, it holds 40 gallons, and uses a transfer pump to fill your main tank when you hit a switch
- 40 gallon capacity, fits where OE spare tire sat (requires spare relocation)
- 40 gallons plus your original 25 gallon tank gives you a capacity of 65 gallons in total!!
- Tank fills using the OEM gas door and supplied parts
- Tank uses a transfer pump to fill the main tank, 2L per minute pump rate
- No Exhaust modification required
- Fitting time – approximately 5 hours
- Part Number TLC200RA-40G
- Fitting Instructions – Intended to be installed by a certified mechanic
- This item ships on a pallet to the nearest Truck Freight terminal for you to pickup. We will be in touch with you regarding the nearest freight terminal, unless you add home delivery
- This product can not be sold or shipped to residents in California. Do not order this product if you live in California!!
- MADE IN AUSTRALIA
- Nearest Freight Terminal Finder – Use this to decide if you want home delivery or pickup at the nearest terminal
- See legal notice at the bottom of the page
(5 reviews) -
Performance Upgrades - Tundra 2nd GenTG Hub-Centric Wheel Spacers Pair 5×150 | From 3/4″ to 2.0″
- Suits 1998-2007 Toyota Land Cruiser 100 Series and Lexus LX470 REAR WHEELS ONLY
- Front and Rear for these: 2008-2021 Toyota Land Cruiser 200 Series and Lexus LX570, 2008-2022 Toyota Sequoia, 2007-2021 Toyota Tundra
- Multiple thickness options from 3/4″ up to 2.0″ thick
- 5x150mm Bolt Pattern
- Billet 6061-T6 Aluminum
- Anodized black with Laser-engraved Trail-Gear Logo
- Class 10.9 M14-1.5 studs and nuts
- For Toyota and Lexus Vehicles with Hub-Centric Wheels (must be Hub-Centric)
- Sold in Pairs
- NOTE! Please verify pattern before ordering!
- See vehicle list down below
- On the ¾” & 1” thick wheel spacers, you will need to trim your wheel studs in order for the wheel to seat on the face of the wheel spacer
- Sold in Pairs
- Used wheel spacers cannot be returned under any circumstances
- Installation Guide
(4 reviews)$159.99 Select options This product has multiple variants. The options may be chosen on the product page -
200 Series Land Cruiser (2008-2021)THIS SHIPS FREE
within 48 US StatesDobinsons Billet Adjustable Rear Lower Trailing Arms Pair | Toyota + Lexus
- Suits all 200 Series Land Cruisers from 2008-2021, 300 Series Land Cruiser, 2023+ Toyota Sequoia, 2024+ Land Cruiser 250 Series, Lexus GX550, and 2025+ 4Runner
- Comes with high quality rubber OE style bushings installed for maximum flexibility, and zero noise
- Made from billet aluminum for maximum strength and fantastic looks
- Oversized adjusters and rod thickness for maximum strength and durability with nut locking feature
- Toyota Sequoia’s need 5mm spacers to offset the mount thickness. Tell us during checkout if you have a Sequoia so that we add the spacers in with the arms.
- Sold as a pair
(0 reviews) -
Upper Control ArmsSPC 35102 Replacement Ball Joint Set for 25455 25465 25480 25490
- Replaces Ball Joints on SPC Arms – 25455, 25465, 25480, 25490
- Will not work on OEM or any other brand aftermarket upper control arms (UCA’s)
- Suits 2008-22 Toyota Sequoia & 2007-21 Toyota Tundra
- Suits 2003-2024 Toyota 4Runner, 2006-2017 Toyota FJ Cruiser, 2003-2009 Lexus GX470, 2010-2023 Lexus GX460, Prado 120 and 150
- Suits all Toyota Land Cruiser 200 Series and Lexus LX570 models – 2008-2021
- Suits 1998-2007 Toyota Landcruiser 100 Series and 1998-2007 Lexus LX470
- Sold in Pairs
- Fully seated boot to keep grease in and contaminants out for a maintenance-free joint
- High strength steel forging with offsets provides camber & caster adjustability
- One piece polymer race tests like OE and provides low & smooth turning torque
- Oversized ball generates 80˚ of articulation with a 25% increase in neck cross section vs. OE for added strength
- Modern grease formula ensures quiet and smooth operation with reduced wear for extended life
- Extended threads on ball stud will work with most popular spindle gusset kits
- These ball joints are reverse compatible and a direct replacement for the SPC upper control arm sets
- Installation Instructions
(9 reviews) -
Bump Stops - 200 SeriesTHIS SHIPS FREE
within 48 US StatesTimbren Bump Stops Front & Rear | Toyota 200 Series Land Cruiser 2008-2021
- Suits 2008-2021 Land Cruiser 200 Series
- Includes both Front and Rear bump stops for the whole vehicle
- Active Off-Road Bumpstops provide off-road enthusiasts greater control over their vehicles’ suspension travel. Using progressive-rate springs means that instead of a hard stop at the end of axle travel the axle energy will be absorbed when bottoming-out producing smooth, predictable, and quiet axle engagement and disengagement.
- Unlike OEM bump stops, Active Off-Road Bumpstops are made from natural rubber. Just like our Timbren SES line, Active Off-Road Bumpstops carry a lifetime warranty and a satisfaction guarantee.
- ABSTORLC2 replaces the rear OEM bump stops and ABSTOF replaces the fronts on the Land Cruiser 200 Series. Upgrade to Active Off-road Bumpstops and experience the difference.
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation
- Satisfaction Guarantee
- Lifetime Warranty
- Front Instructions and Rear Instructions
(14 reviews) -
Upper Control ArmsTHIS SHIPS FREE
within 48 US StatesDobinsons Billet Aluminum UCA’s Pair | Toyota 200 Series Land Cruiser 2008-2021
- Super strong billet aluminum front upper control arms (UCA’s)
- Suits 2008-2021 Toyota Land Cruiser 200 Series and Lexus LX570
- Complete kit for both left and right hand side
- OE-style sealed ball joints for a maintenance free life
- OE-style high quality rubber bushings for maximum NVH dampening and longevity
- No greasing or maintenance required at all, completely noise-free operation
- Adjustable on-vehicle for quick and easy alignment.
- Adjustable Camber and Caster for perfecting the vehicle’s handling
- O-ring sealed ball joint cap for protection against the elements
- Works for any lift height of 1.5″ or more
- *Must reuse OEM Washers
- Installation Instructions
- We recommend visiting an offroad specific shop for alignment, a regular alignment shop may not be able to adjust and align properly due to the added adjustability these arms offer
- Replacement Ball Joints can be ordered here
- Photos for illustration purposes
(8 reviews) -
SnorkelsDobinsons Toyota Land Cruiser 200 Series Snorkel Kit for 2016-2021
- 200 Series Snorkel Kit – Suits Toyota Land Cruiser 200 Series and Lexus LX570 2016-2021 Models
- Smooth body, no writing or logos on the body
- Rotationally molded using precision CNC shaped aluminum dies
- Increases air intake height to allow safer water crossings and reduce dust intake
- Increased air intake height rams cooler, cleaner air into the engine increasing engine performance
- The higher the intake, the less dust is in the air
- Manufactured from high quality UV resistant LLDPE
- Snorkel Kits include template and all mounting hardware
- There’s a different snorkel to fit the 2015 and older models here
- Installation Guide
(8 reviews) -
Control Arms - 200 SeriesTHIS SHIPS FREE
within 48 US StatesOME Upper Control Arms Pair – 200 Series Toyota Land Cruiser 2008-2021
- Suits Land Cruiser 200 Series and Lexus LX570 2008-2021
- Forged Ball Joint Housing
- Forged Eyelets
- Heavy Duty greasable Ball Joints
- OME Ball joint protective cap
- GIIRO bushings, free pivoting, grease free and maintenance free
- Increased camber and caster for 2in lift
- Mount provision for OE ABS wires
- ARB’s Intergrit powder coat finish
- Boxed in pairs with foam inserts
- Fitting instructions included
- OME Branded outer sleeve
- Tested and passed to meet VSB14 requirements
- 3 Year Manufacturers Warranty
- Made in Vietnam
(13 reviews) -
ExceptionsTHIS SHIPS FREE
within 48 US StatesDobinsons Rear Adjustable Hydro Bump Stop Kit | LC 200 250 300 Sequoia GX550 4Runner
- Complete hydro bump stop kit to replace the factory coil isolator and internal bump stop
- Suits the rear of the following vehicles:
- Toyota Land Cruiser 200 Series and Lexus LX570 2008-2021
- 2022+ Land Cruiser 300 Series
- 2024+ Land Cruiser 250 Series, Lexus GX550
- 2023+ Toyota Sequoia
- 2025+ Toyota 4Runner
- This hydraulic bump stop kit replaces the factory inner bump stop that holds the coil springs in place and also provides additional bottom-out protection
- The Dobinsons Rear Adjustable Hydro Bumps Stop kit also retains the original external bump stop on the frame, and the kit comes with spacer blocks to lower the original bump stop down to meet the same bottom-out level as the new hydraulic bumps
- You can replace the original frame-mounted bump stop with an aftermarket one if you’d like
- This hydro bumps stop kit replaces the factory inner bump stop that holds the coil springs in place and also provides additional bottom-out protection, in addition to setting the bump stop gap for long travel shocks, increased tire clearance, or whatever else you may need to restrict or free up the amount of bump stop gap that your vehicle has
- The adjustable hydro bumps can easily spin on their threaded body to raise up or down in the mounts provided so that you can tune in the height quite easily
- You’ll possibly have to take the coil out of the way to get in there and accurately set and adjust the height
- CNC Machined 50mm Billet Aluminum Piston
- EDP Coated 3mm Thick 56mm Steel Body
- Threaded Body For Height Adjustment to adjust when the stop will engage
- Supplied with both Interchangeable Super Quiet Rubber Rod End & Hard Nylon
- 30mm Micro Polished Hard Chrome Shaft
- Slow Rebound Valving To Prevent Bucking
- Removable Dust Cover Boot For Stealth Appearance
- Fully Rebuildable & Tunable
- O-Ring Travel Indicator
- Heavy Duty Extreme-Race style Triple Seal Design
- Nitrogen Gas Charged & Tunable (100 to 300 PSI)
- Pre-charged to 110 PSI
- Extra Short Dead Lengths For Compact Fitment
- Includes full fit kit, 2 hydro bump stops, and spacer blocks for frame-mounted external bump stops
- Kit Includes:
- HBS59-013FK Mounting Kit
- HBS56-009 Hydraulic Bump Stops
- 46mm – 1.8″ stroke, 105mm – 4″ thread length, 188mm – 7.4″ extended length, 142mm – 5.6″ compressed length
- Installation Instructions
(7 reviews) -
200 Series Land Cruiser ARMOREDDobinsons Front Monster Struts Pair for Armored Land Cruiser 200 Series XHD
- Made for Armored Vehicles ONLY – Level B6 or B7 Armored Toyota Land Cruiser 200 Series
- Mammoth 70mm body housing with a massive volume of high quality German shock oil
- 20mm Diameter heavy duty chrome piston rods
- 45mm Extra Large Pistons
- 4mm Heavy Duty Wall thickness, double the thickness of regular shock walls
- Threaded adjustable spring seat height for adjustment and additional heat dissipation
- 1 piece drop forged lower strut mount for maximum strength
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- See all suitable armored coil spring options HERE
- Sold in Pairs
(10 reviews) -
200 Series Land Cruiser ARMOREDDobinsons C59-564 B7 800-900KG Armored Land Cruiser 200 Series Front Coils – Pair
- C59-564 – Front Coils for Level B7 Armor with 800-900KG of additional weight over stock – 200 Series Land Cruiser
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish.
- Sold as a Pair – marked side specific for installation
(4 reviews)$450.00 Select options This product has multiple variants. The options may be chosen on the product page -
200 Series Land Cruiser (2008-2021)Toyota Land Cruiser 200 Series 2008-2021 Long Range Auxiliary Fuel Gas Tank (24gal)
- Suits Toyota Landcruiser 200 Series 2008-2021 with the gas engine, also suits the Lexus LX570 of the same years
- This is an additional tank that goes where the factory spare tire sat, it holds 24 gallons, and uses a transfer pump to fill your main tank when you hit a switch
- 24 gallon capacity, fits where OE spare tire sat (requires spare relocation)
- 24 gallons plus your original 25 gallon tank gives you a capacity of 49 gallons in total!!
- Tank fills using the OEM gas door and supplied parts
- Tank uses a transfer pump to fill the main tank, 2L per minute pump rate
- No Exhaust modification required
- Fitting time – approximately 5 hours
- 24 gallon tank is built the same as the 40gal, but with better clearance and departure angle (hangs down less)
- Part Number TLC200RA24G
- Fitting Instructions – Intended to be installed by a certified mechanic
- This item ships on a pallet to the nearest Truck Freight terminal for you to pickup. We will be in touch with you regarding the nearest freight terminal, unless you add home delivery.
- This product can not be sold or shipped to residents in California. Do not order this product if you live in California!!
- MADE IN AUSTRALIA
- Nearest Freight Terminal Finder – Use this to decide if you want home delivery or pickup at the nearest terminal
- See legal notice at the bottom of the page
(5 reviews) -
DobinsonsDobinsons Rear Adjustable Hydro Bump Stop Fitting Kit | LC 200 250 300 Sequoia GX550 4Runner
- Hydro bump stop FITTING KIT ONLY to replace the factory coil isolator and internal bump stop
- If you want to buy a complete kit with this mounting kit and bump stops, go to This Page
- This hydraulic bump stop kit replaces the factory inner bump stop that holds the coil springs in place and also provides additional bottom-out protection
- The Dobinsons Rear Adjustable Hydro Bumps Stop kit also retains the original external bump stop on the frame, and the kit comes with spacer blocks to lower the original bump stop down to meet the same bottom-out level as the new hydraulic bumps
- You can replace the original frame-mounted bump stop with an aftermarket one if you’d like
- This hydro bumps stop kit replaces the factory inner bump stop that holds the coil springs in place and also provides additional bottom-out protection, in addition to setting the bump stop gap for long travel shocks, increased tire clearance, or whatever else you may need to restrict or free up the amount of bump stop gap that your vehicle has
- The adjustable hydro bumps can easily spin on their threaded body to raise up or down in the mounts provided so that you can tune in the height quite easily
- You’ll possibly have to take the coil out of the way to get in there and accurately set and adjust the height
- Suits the rear of the following vehicles:
- Toyota Land Cruiser 200 Series and Lexus LX570 2008-2021
- 2022+ Land Cruiser 300 Series
- 2024+ Land Cruiser 250 Series, Lexus GX550
- 2023+ Toyota Sequoia
- 2025+ Toyota 4Runner
- Use with Dobinsons HBS56-009 Hydraulic Bump Stops
- 46mm – 1.8″ stroke, 105mm – 4″ thread length, 188mm – 7.4″ extended length, 142mm – 5.6″ compressed length
- Installation Instructions
(0 reviews) -
All Pro OffroadAll Pro Outer CV Boot Kit | 07-21 Tundra | 98-21 Land Cruiser | 08-22 Sequoia
- Outer CV boot replacement kit – Suits Toyota Tundra 2007-2021, Toyota Sequoia 2008-2022, Toyota Land Cruiser 100 Series 1998-2007 and Lexus LX470, Toyota Land Cruiser 200 Series and Lexus LX570 2008-2021
- Includes outer OEM-Style CV boots and all related clamps.
- Qty 2 – OEM-Style Neoprene Outer CV Boots
- Qty 2 – CV Grease Packets
- Qty 4 – Ear-Type CV-Joint Clamps
- Qty 2 – Axle C-Clips and Snap Rings
(8 reviews) -
Gull Wing WindowsToyota Land Cruiser 200 Series Gull Wing Window 2008-2021
- Suits 2008-2021 Toyota Land Cruiser 200 Series and Lexus LX570 SUV’s
- Options for the rear left (USA driver’s side) and rear right (USA passenger’s side)
- 3mm aluminum outer panel
- 2mm stainless steel inner mounts and structure
- Powder coated texture black
- Thick rubber seal
- Lockable compression latches
- Stainless steel hinges
- Gas strut to assist with opening
- Requires assembly and installation
- Simple and reversible installation
- Made in Australia by The Cruiser Company
- Installation Instructions
(8 reviews) -
200 Series Land Cruiser (2008-2021)THIS SHIPS FREE
within 48 US StatesIcon Tubular Lower Trailing Arm Pair | 4Runner FJ Cruiser GX470 GX460 LC200
- Suits 2003-2009 4Runner, 2010-2024 4Runner, FJ Cruiser (all years), Lexus GX470 and Lexus GX460, Lexus LX570 and 200 Series 2008-2021, Prado 120 and 150
- CNC machined & notched 1026 DOM steel construction
- Multi durometer bushing for noise free operation and maximum angularity
- No grease required for life of bushings
- Quality JM16T PTFE-lined FK Rod Ends
- Adjustable for various lift heights & driveline angles
- Offset lower link front pivots improve roll steer
- Tangent lower link barrel design reduces risk of off-road hangups
- Integrated OEM emergency brake bracket mount
- ICON1K tested in extreme off-road conditions
- Fabricated components covered under ICON’s lifetime warranty
- Sold as a Pair
- Installation Guide
- Warranty Info
(7 reviews) -
SnorkelsDobinsons Toyota Land Cruiser 200 Series Snorkel Kit for 2008-2015
- 200 Series Snorkel Kit – Suits Toyota Land Cruiser 200 Series 2008-2015 Models
- Smooth body, no writing or logos on the body
- Rotationally molded using precision CNC shaped aluminum dies
- Increases air intake height to allow safer water crossings and reduce dust intake
- Increased air intake height rams cooler, cleaner air into the engine increasing engine performance
- The higher the intake, the less dust is in the air
- Manufactured from high quality UV resistant LLDPE
- Snorkel Kits include template and all mounting hardware
- Installation Instructions
(6 reviews)
