Your cart is currently empty!
80 Series Land Cruiser (1990-1997)
Showing 31–60 of 142 resultsSorted by popularity
-
80 Series Land Cruiser (1990-1997)FREE SHIPPING
within 48 US StatesTimbren ABSTORLC1 Active Off Road Toyota 80 Series Rear Bump Stops
- Suits Land Cruiser 80 Series and Lexus LX450
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation
- Satisfaction Guarantee
- Lifetime Warranty
- Suits 1990 to 1997 Toyota Landcruiser 80 Series Rear End
- Overall kit height = 8.25”
- Total deflected (compressed) height = 6”
- Amount of deflection (compression) = 2.25”
- NOTE: Bolts into the frame. Adding nutserts may be required depending on frame condition
- Oversized coils and wide tires without much offset could possibly contact the bump stops
- Clearancing of the bracket and the bump stop cup may be required on some long travel setups to avoid clearance issues with the coil springs
- Click here for instructions
(11 reviews) -
80 Series Land Cruiser (1990-1997)Dobinsons 5° Caster Plate Kit | Land Cruiser 80 Series
- Suits Land Cruiser 80 Series and Lexus LX450
- For 5″ to 7″ lift heights, realigns front caster angle
- Zinc plated steel with all hardware supplied, super heavy duty
- Simple bolt-on design with some grinding required
- Not necessary to remove OE bushes, saving time and money
- Optional RB59-536K replacement rubber bush kit available for Radius Arm to diff positions
- Installation Instructions
(2 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons 20mm Coil Spacer (Single) for Front of Toyota Land Cruiser 80 105
- Suits Land Cruiser 80 Series and Lexus LX450
- High Quality Polyurethane, maintains height over time
- Perfect fit between OE isolator and coil seat
- Sold individually, available front and rear for several vehicles
- Lasts longer than rubber
- Easy to add lift height for worn coils
(7 reviews) -
Control Arms - 80 Series
Dobinsons 80 Series Upper and Lower Rear Trailing Arms bundle
- Suits all 80 Series Land Cruisers and Lexus LX450 from 1990 to 1997
- Bundle of both the upper and lower rear adjustable control arms
- Comes with high quality rubber OE style bushings installed for maximum flexibility, and zero noise
- Made from HSLA (High Strength Low Alloy) Steel, 40mm OD and 6mm wall thickness with support brace
- Oversized adjusters and rod thickness for maximum strength and durability with double-nut locking feature
- Zinc plated, then E-coated black, for the ultimate finish and protection
(0 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons C59-169 Rear Coil Springs | Land Cruiser – Pair Teal
- 80 SERIES and Lexus LX450 (1990-1997) – Dobinsons C59-169 1.75″ with up to 220lbs weight
- 100 SERIES (1998-2007) – Dobinsons C59-169 – 1″ lift, linear rate, with stock weight. For slightly above OE stock height. Ideal if someone is doing AHC removal but doesn’t want to add lift
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 465/475mm free height, 227 LB spring rate
(16 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons GS59-687 4-5″ Rear Shocks Pair for 80 Series Land Cruiser
- Sold as a Pair, suits lifts of 4-5″ or for Long Travel setups – 1990-1997 Toyota Landcruiser 80 Series and Lexus LX450
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS59-687 Specifications: 680mm extended, 407mm compressed, 60mm body size
- Bump stop extensions and longer brake lines must be run with these longer shocks
- Sold in Pairs
(6 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons GS45-912 4-5″ Front Shocks Pair for 80 Series Land Cruiser
- Suits: Toyota Land Cruiser 80 series and Lexus LX450 1990-1997 for 4-5″ of Lift
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals
- Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS45-912 specifications: 670mm extended, 390mm compressed, 60mm body size
- Bump stop extensions and longer brake lines must be run with these longer shocks
- Sold in Pairs
(6 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons Adjustable Front Poly Caster Bushing Kit 0° 2.5° 3.5° | Land Cruiser
- Suits Land Cruiser 80 Series and Lexus LX450
- For 0″ to 4″ of lift, Recommended when replacing 20+ year old suspension parts
- Contains all 4 bushings for the front of the radius arm to axle
- Can be set to 3 different caster settings quite easily
- The inner core can be slid out and rotated to go to the next caster setting without requiring a press
- This kit is a must for any lifted Landcruiser so that the steering control is correct giving you the best ride quality possible
- Dobinsons offer other separate bush kits for Caster and Radius Arms. Contact us for more information
- Installation Instructions
(10 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons C97-145VT Dual Rate Rear 3.5″ Coils | 80 Series 1990-1997 – Pair Teal
- Suits Land Cruiser 80 Series and Lexus LX450
- Lifts 3.5″ with full rear bumper, tire carrier, roof rack, drawers, 2nd tank, etc. Lifts more without as much weight added
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Teal
- Sold in Pairs
- VT Series Dual Rate Coils for maximum travel and the best ride quality
- Also made in black
(10 reviews) -
100 Series Land Cruiser IFS (1998-2007)
Dobinsons Rear 15mm Polyurethane Coil Spacer (Single) Toyota Land Cruiser 80 100 105
- Suits Land Cruiser 80 Series, 100 Series and Lexus LX450
- High Quality Polyurethane, maintains height over time
- Perfect fit between OE isolator and coil seat
- Sold individually, available front and rear for several vehicles
- Lasts longer than rubber
- Easy to add lift height for worn coils
(5 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons C97-146VT Dual Rate Front 2.5″ Coils | 80 Series 1990-1997 – Pair
- Suits Land Cruiser 80 Series and Lexus LX450
- Lifts 2.5″ with 200LBS front end constant weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Teal
- VT Series Dual Rate Coils for maximum travel and the best ride quality
- Also made in black
(12 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons Front Rubber Bushings, Radius Arm to Chassis (Fixed End) for Land Cruiser 80 Series
- Suits Land Cruiser 80 Series and Lexus LX450
- For any lift height, or no lift. These are OE replacement bushings.
- High quality rubber, producing the highest ride quality
- Pressing of bushings is required during installation
- Replaces OE bushings holding front radius arms to the frame
(0 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons C59-185 Rear Coil Springs | Land Cruiser – Pair
- 80 Series and Lexus LX450 (1990-1997) – Dobinsons c59-185 – 3″ lift with up to 220lbs weight
- 100 Series (1998-2007) – Dobinsons C59-185 – 1.5″ lift, linear rate, with 440LBS constant rear weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 480/490mm free height, 19mm wire, 277LB rate
- Sold in Pairs
(16 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons C97-144VT Dual Rate 3.5″ Front Coils | 80 Series 1990-1997 – Pair
- Suits Land Cruiser 80 Series and Lexus LX450
- Lifts 3.5″ with a heavy load front end (bumper, winch, 2nd battery, etc). Lifts more without added weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Teal
- Sold in Pairs
- VT Series Dual Rate Coils for maximum travel and the best ride quality
- Also made in black
(13 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons C59-612V 3″ Flexi Front Coil Springs | Land Cruiser 80 series – Pair
- Suits Land Cruiser 80 Series and Lexus LX450
- 3″ lift with up to 200 LBS of additional accessory weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 540/550mm free height, 17mm wire, 180-275LBF/in variable rate
- Sold in Pairs
(16 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons MRA45-A912 3-Way Adjustable MRA Front Shocks Pair | 80 Series 4″ Lift
- Suits Toyota Land Cruiser 80 Series and Lexus LX450 1990-97, suitable for 4″ of lift
- 3-way adjustable valving – Adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Installation Instructions of the MRA Shocks
- 667mm extended, 401mm compressed
- Bump stop extensions and longer brake lines must be run with these longer shocks
- Full 2 year limited warranty, no set rebuild time period
(15 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons C97-147VT Dual Rate 2.5″ Rear Coils | 80 Series 1990-1997 – Pair
- Suits Land Cruiser 80 Series and Lexus LX450
- Lifts 2.5″ with 400LBS rear constant load. Lifts more with less weight on the vehicle
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Teal
- Sold in Pairs
- VT Series Dual Rate Coils for maximum travel and the best ride quality
- Also made in black
(11 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons C59-613V 3″ Flexi Rear Coil Springs | Land Cruiser 80 series – Pair
- Suits Land Cruiser 80 Series and Lexus LX450
- 3″ lift with up to 200 LBS of additional accessory weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 540/550mm free height, 18mm wire, 175-275LBF/in variable rate
- Sold in Pairs
(17 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons MRA59-A687 3-Way Adjustable MRA Rear Shocks Pair | 80 Series 4″ Lift
- Suits Toyota Land Cruiser 80 Series and Lexus LX450 1990-97, suitable for 4-5″ of lift, or when used in a long travel setup
- 3-way adjustable valving – Adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 22mm / 7/8″ shaft diameter
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Piggyback Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- 674mm extended, 420mm compressed
- Installation Instructions of the MRA Shocks
- Bump stop extensions and longer brake lines must be run with these longer shocks
(16 reviews) -
Replacement Bushings
Dobinsons Lower Shock Bushings (2 Halves) for -682 -687 -685 -649 -651 -637
- Dobinsons replacement rear lower shock bushing – 2 half bushings for 1 shock
- Suits a variety of Dobinsons shocks, part numbers ending in -682 -687 -685 -649 -651 -637
- Full list of part numbers this fits is below
- This is for a single bushing set only for 1 shock
- 2 half bushings, they go in from either side of the lower eyelet to form a complete bushing
- High quality natural rubber bushing
(0 reviews) -
Accessories
Dobinsons 80 Series Drawers for Toyota Land Cruiser 1990-1997
- Suits 1990-1997 Toyota Land Cruiser 80 Series and Lexus LX450
- 1.6mm Zinc Plated Robust Steel Construction
- 12mm Heavy Duty Plywood Panels with Marine Carpet Covering
- Built in Heavy Duty Fridge Slide
- 8 x Heavy Duty Stainless Steel Tie Down Points
- Comprehensive outer wing trim kit to provide a factory fit (optional)
- Aluminum Edging Protection, Heavy duty lockable latches
- Massive 150KG (330LB) Drawer Capacity on Heavy Duty Roller Bearing System
- Add optional Dobinsons Rear Drawer Table Top for better useability of the drawer
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address
(11 reviews) -
80 Series Land Cruiser (1990-1997)FREE SHIPPING
within 48 US StatesDobinsons 0-3.5″ IMS Lift Kit Builder | Land Cruiser 80 Series
- Suits Land Cruiser 80 Series and Lexus LX450
- Complete IMS suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to match OE fitment specs
- IMS Shocks are Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base kit includes front and rear coils and shocks, you can add any other parts you need – you choose
- Choose your coils and load carrying ability, anywhere from 0″ up to 3.5″ of Lift
(9 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons MRA59-A683 3-Way Adjustable MRA Front Shocks Pair | 80 Series 0-3″ Lift
- Suits Toyota Land Cruiser 80 Series and Lexus LX450 1990-97, suitable for 0-3″ of lift
- 3-way adjustable valving – Adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 22mm / 7/8″ shaft diameter
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Installation Instructions of the MRA Shocks
- 627mm extended, 385mm compressed
- Full 2 year limited warranty, no set rebuild time period
(17 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons Land Cruiser 80 Series Shocks ALL Options – Front and Rear
- This page shows all Dobinsons shock options for the 1990-1997 Toyota Land Cruiser 80 Series and Lexus LX450
- See the description below for information about the difference between the 3 different shock types
- Select the shock type you’d like that will also suit the amount of lift or travel that you are looking for
- Keep in mind that using an extended travel shock can always require additional parts, such as extended brake lines, bump stops, suitable coils, trailing arms, drive shafts, etc
- All shocks are sold in PAIRS, steering dampers are individual
- Order what you would like, but only order 1 set of front shocks and 1 set of rear shocks
- Shocks front and rear need to match – IMS front and rear, or twin tube front and rear, for example
- All shocks come with new bushings and any required hardware for installation (MRA shocks come with resi brackets)
- Any length shocks for more than 3″ lift require adequate bump stop spacing to prevent shock bottom-outs
- The extended and compressed lengths of each shock are listed in millimeters (mm), (extended/compressed)
- To see full details of each product, select it from the drop-down menu, then click the small square box that appears to the right to be taken to that product page for full details and shock specs
(0 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons C59-614V 4″ Flexi Front Coil Springs | Land Cruiser 80 series – Pair
- Suits Land Cruiser 80 Series and Lexus LX450
- 4″ lift with up to 200 LBS of additional accessory weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 570/580mm free height, 17mm wire, 180-275LBF/in variable rate
- Sold in Pairs
(15 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons C59-220V Front Coil Springs | Land Cruiser 80 Series 2.0″ Lift Progressive Rate with 0-110LBS Load – Pair
- Suits Land Cruiser 80 Series and Lexus LX450
- C59-220V are Front Progressive / Variable rate coils to give a 2″ lift with 0-110 LBS of additional accessory weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 495/505mm free height, 16mm wire, variable rate
- Sold in Pairs
(15 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons 3.5-4″ Lift Kit Builder | Land Cruiser 80 Series 1990-97 (inc all shock options)
- Suits Land Cruiser 80 Series and Lexus LX450
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- **Kit photo shows with every additional option purchased**
- Coils are specifically suited to match OE spec and height
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- A Standard 4″ Base Kit should include front and rear shocks and coils, 5 degree castor plate kit, Front and Rear adjustable panhard rods, front sway bar extensions and rear proportioning valve extension and brake lines. Make selections below
- Select from Dobinsons Twin Tube, IMS Monotube, or MRA 3-way Adjustable Monotube Remote Reservoir shocks
- You must choose what coils, shocks and other components you want to add
(13 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons 10mm Coil Spacer (Single) for Front of Toyota Land Cruiser 80 105
- Suits Land Cruiser 80 Series and Lexus LX450
- High Quality Polyurethane, maintains height over time
- Perfect fit between OE isolator and coil seat
- Sold individually, available front and rear for several vehicles
- Lasts longer than rubber
- Easy to add lift height for worn coils
- Lifts 10mm (0.4″)
(8 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons C59-269V Rear Coil Springs | Land Cruiser 80 Series – Pair
- Suits Land Cruiser 80 Series and Lexus LX450
- C59-269v 1.75″ Comfort ride spring with only stock weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 480/490mm free height, 17mm wire, variable rate
- Sold in Pairs
(18 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons C59-171 Rear Coil Springs | Land Cruiser – Pair
- 80 Series and Lexus LX450 (1990-1997) – Dobinsons c59-171 – 2″ lift with 750lbs weight, OR 3″ lift with 440lbs weight
- 100 Series (1998-2007) – Dobinsons C59-171 – 1.5″ lift, linear rate, with 880LBS constant rear weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 485/495mm free height, 328LBF/in rate
- Sold in Pairs
(16 reviews)
