Your cart is currently empty!
Land Cruiser
Showing 271–300 of 417 resultsSorted by popularity
-
250 Series Land Cruiser (2024+)ETA is Spring 2025
Dobinsons C59-883V Rear Coil Springs Pair
- Lifts the Rear of a 2024+ Toyota Land Cruiser 250 series 10mm (0.4″)
- This Variable Rate Coil Allows Less Height Change and Provides a Firmer Ride When Loaded
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(0 reviews)$270.00 Select options This product has multiple variants. The options may be chosen on the product page -
250 Series Land Cruiser (2024+)ETA is Spring 2025
Dobinsons C59-882 Front Coil Springs Pair
- Lifts the front of a 2024+ Toyota Land Cruiser 250 series 2.0″ with stock weight with the 2.4L or 2.7L gas engine.
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(0 reviews)$270.00 Select options This product has multiple variants. The options may be chosen on the product page -
250 Series Land Cruiser (2024+)FREE SHIPPING
within 48 US StatesDobinsons IMS59-60660 2.6″ IFP Front Struts Pair | 2024+ Land Cruiser 250
- Suits Toyota Land Cruiser 250 Series 2024+
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- 22mm / 7/8″ shaft diameter on front struts
- Full 2 year limited warranty, no set rebuild time period
- Standard coil seat height should be set to 237mm (9.3″) from the center of the lower hole to the base notch where the coil sits
- SOLD IN PAIRS
- Shocks do not suit any models that have factory electronic adjustable Shock Absorbers
- Photos for illustration purposes only
(0 reviews) -
LJ70, LJ72, LJ73, LJ77 - 90-93 - Square Headlights
Dobinsons C59-289B 1.75″ Rear Coil Springs | LAND CRUISER 70 Series Multiple Models – Pair Black
- Dobinsons C59-289 Rear Coil Springs for TOYOTA LAND CRUISER LJ70, LJ72, LJ73, LJ77 1/90-5/93 1.75″ and 70 Series Prado I, Land Cruiser II, LJ78/79, RJ70, RJ77, KZJ78 – 87-96 with stock rear weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – BLACK
- Sold as a Pair
(0 reviews) -
LJ70, LJ72, LJ73, LJ77 - 90-93 - Square Headlights
Dobinsons C59-288B 1.75″ Front Coil Springs | LAND CRUISER 70 Series Multiple Models – Pair Black
- Dobinsons C59-288 Front Coil Springs for TOYOTA LAND CRUISER LJ70, LJ72, LJ73, LJ77 1/90-5/93 W/SQUARE HEADLIGHTS and 70 Series Prado I, Land Cruiser II, LJ78/79, RJ77, KZJ78 – 87-96 1.75″ with bumper OR winch weight of 110lbs.
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – BLACK
- Sold as a Pair
(0 reviews) -
DobinsonsDobinsons 4° Caster Plate Kit | Land Cruiser 71 76 78 79 Series
- Suits 9/1999+ Toyota Land Cruiser 70 Series, 71,76,78, 79 with 3-5″ of lift
- For 3″ to 5″ lift heights, realigns front caster angle
- Uses a combination of caster bushings and plates to rotate the axle to correct caster and prevent contact with tie rod and radius arms
- E-coated steel with all hardware supplied, super heavy duty
- Simple bolt-on design with some grinding required
- WA59-585K Caster Plate Kit Instructions
- If you have less than 3″ of lift, use PB59-503K instead
(0 reviews) -
80 Series Land Cruiser (1990-1997)
OME Land Cruiser Steering Damper for 60 70 80 series 1980-1997
- Suits Land Cruisers, Series 60, 61, 62, 70, 71, 73, 74, 75, and 80 series from 1980-1997 and Lexus LX450
- A new steering damper helps fight bump steer and makes driving offroad feel smoother from the driver’s seat
- If you don’t know how old your current steering damper is, then it’s time to replace it
- Nine Stage Coil Spring Valving For Optimum Performance
- A 15mm Piston Rod Provides Improved Strength
- Stone Guard Protects Piston Rod Against Stone Damage
- A 35mm Piston And Bore Allows Increased Oil Volume
- Twin Tube Design Protects Internal Components Against Stone Damage
- Multi-Lip Seal Prevents Oil Loss
- Original Stabilizer Mounts May Be Used Where Appropriate
(18 reviews) -
Bundera LJ70/LJ73 - 84-89 - Round Headlights
Dobinsons GS59-652K Rear Shocks Pair for Toyota Land Cruiser Bundera 70 Series 11/84-12/89
- For 11/84 to 12/89 Toyota 70 Series Bundera models, LJ70, LJ73, RJ70 and RJ73 with Round Headlights
- Rear Pair of Shocks for 1.75-2.5″ of lift
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Photo for illustration purposes
(12 reviews) -
Bundera LJ70/LJ73 - 84-89 - Round Headlights
Dobinsons GS45-114 Front Shocks Pair for Toyota Land Cruiser Bundera 70 Series 11/84-12/89
- For 11/84 to 12/89 Toyota 70 Series Bundera models, LJ70, LJ73, RJ70 and RJ73 with Round Headlights
- Front Pair of Shocks for 1.75-2.5″ of lift
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Photo for illustration purposes
(10 reviews) -
RCV AxlesFREE SHIPPING
within 48 US StatesRCV Ultimate 300M Rear Full Float 80 Series Rear Axles Set
- Suits Toyota Land Cruiser 80 Series 1990-1997 and Lexus LX450 with 9.5″ Full Float Rear Axle
- Ultimate 300M Toyota FJ80 Rear Full float axle set
- Designed to work with all differential types ( OE open carrier, Aftermarket lockers and OE Electric locker )
- Updated shaft design to aid in known OE Electric locker issues (with axle twist)
- Sold as a Set, left and right included
- Backed by the “No Questions Asked” limited lifetime warranty
- Warranty included with up to a 40″ tire
- 30 Spline Axle Ends
- Left inner axle length is 30.22″
- Right inner axle length is 37.76″
- Made in the USA
(9 reviews) -
Trail-Gear
HD Land Cruiser 80 Series Steering Upgrade Kit
- Suits 1990-1997 Toyota Land Cruiser 80 Series and Lexus LX450
- Kit includes all new Tie Rod and ends, Drag Link and ends and Steering damper
- (2) Left-hand threaded Heavy-Duty FJ80 Tie Rod Ends with Hardware
- (2) Right-hand threaded Heavy-Duty FJ80 Tie Rod End with Hardware
- (1) Tie Rod made from 1.25”OD x 0.25” Wall DOM Tubing
- (1) Drag Link made from 1.25”OD x 0.25” Wall DOM Tubing
- (1) Steering Stabilizer with 8” Stroke and Mounting Hardware
- Installation Instructions
(9 reviews) -
Trail-Gear
HD Land Cruiser 80 Series Tie Rod Kit
- Suits 1990-1997 Toyota Land Cruiser 80 Series and Lexus LX450
- Made from 1.25″ x .250″ wall DOM
- Includes FJ80 Heavy Duty Tie Rod Ends
- (1) Left-hand threaded Heavy-Duty FJ80 Tie Rod End with Hardware
- (1) Right-hand threaded Heavy-Duty FJ80 Tie Rod End with Hardware
- The rod ends are greased for life, sealed, and include the cotter pin and jam nut
- Tie Rod is precision tapped with left-hand threads marked
- Easy to adjust the total toe by rotating the tie rod once installed
- Installation Instructions
(9 reviews) -
Trail-Gear
Rock Defense 80 Series Rear Bumper
- Suits 1990-1997 Toyota Land Cruiser 80 Series and Lexus LX450
- Made out of 1020 DOM (1.75″ X .120″ wall)
- Includes D-ring mounts and rear top step plate
- Mounting plates made out of 3/8″ and 1/4″ laser cut steel
- Includes all new mounting hardware
- Can use factory tow package if you desire (sits below the bumper)
- Unpainted steel finish
- Made in the USA
- Ships by UPS Ground
- Installation Instructions
- When fitting on a Lexus LX450, the sides could get close or touch the plastic body cladding
(9 reviews) -
Trail-Gear
Rock Defense Low Profile 80 Series Front Bumper w/Stinger
- Suits 1990-1997 Toyota Land Cruiser 80 Series and Lexus LX450
- Includes welded on stinger bar as the top tube
- Made out of 1020 DOM (1.75″ X .120″ wall).
- Winch mount is made out of a .25″ CNC formed steel plate
- Mounting holes on the winch plate are drilled for most 5000-9500 model low-profile winches and smaller sized 9.0R Warn competition winches
- Bumpers also features a shackle receiver
- Unpainted steel finish
- Will not work with roller type fairlead, requires hawse type fairlead
- Weight is 94LBS
- Made in the USA
- Ships by UPS Ground
- Installation Instructions
- Also sold without a stinger top tube added as pictured in some of the photos
(9 reviews) -
70/73 Series - HZJ70, HZJ73, PZJ70, PZJ73 (1990-1999)
Dobinsons 2.0″ Suspension Kit Toyota Land Cruiser 70 Series – HZJ70 HZJ73 PZJ70 PZJ73
- Full 2.0″ Suspension Kit Replacement for Toyota Land Cruiser 70 Series – HZJ70, HZJ73, PZJ70, PZJ73 1990-1999
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- Select medium or heavy load leaf spring options
- Now with option to run new Dobinsons IMS shocks as an upgrade
(5 reviews) -
Performance Upgrades - 200 SeriesFREE SHIPPING
within 48 US StatesPowerbrake X-Line Lexus LX570 Big Brake Kit for 2016-2021
2016-2021 Lexus LX570 Big Brake Kit Includes:
- X-Line billet 6-piston off-road calipers (pair)
- High-performance brake pads, pre-loaded into the calipers
- 1-Piece 14.6″ x 1.34″ 56-vane discs
- 56 Curved, directional cooling vanes
- Billet caliper mounting brackets
- Stainless steel braided brake lines
- All necessary mounting hardware for quick, easy bolt-on installation
- Comprehensive fitment and bed-in instructions
- Suits 2016-2021 models with M14 caliper mounting bracket bolts
- Now Includes Upgraded Powerbrake Pads, PB05 Compound – highest level 4×4 brake pads available – made in Japan
- Manufactured, finished and packaged 100% in South Africa
- REQUIRES 18″ WHEELS FOR ADEQUATE CALIPER CLEARANCE
- Check out the rear brake upgrade also
(9 reviews) -
ExceptionsFREE SHIPPING
within 48 US StatesDobinsons Rear Adjustable Hydro Bump Stop Kit | LC 200 250 300 Sequoia
- Complete hydro bump stop kit to replace the factory coil isolator and internal bump stop
- Suits the Rear of Toyota Land Cruiser 200 Series and Lexus LX570 2008-2021 and 2022+ Land Cruiser 300 Series, 2024+ Land Cruiser 250 Series, 2023+ Toyota Sequoia
- CNC Machined 50mm Billet Aluminum Piston
- EDP Coated 3mm Thick 56mm Steel Body
- Threaded Body For Height Adjustment to adjust when the stop will engage
- Supplied with both Interchangeable Super Quiet Rubber Rod End & Hard Nylon
- 30mm Micro Polished Hard Chrome Shaft
- Slow Rebound Valving To Prevent Bucking
- Removable Dust Cover Boot For Stealth Appearance
- Fully Rebuildable & Tunable
- O-Ring Travel Indicator
- Heavy Duty Extreme-Race style Triple Seal Design
- Nitrogen Gas Charged & Tunable (100 to 300 PSI)
- Pre-charged to 110 PSI
- Extra Short Dead Lengths For Compact Fitment
- Includes full fit kit, 2 hydro bump stops, and spacer blocks for frame-mounted external bump stops
- Kit Includes:
- HBS59-013FK Mounting Kit
- HBS56-009 Hydraulic Bump Stops
- 46mm – 1.8″ stroke, 105mm – 4″ thread length, 188mm – 7.4″ extended length, 142mm – 5.6″ compressed length
- Installation Instructions
(7 reviews) -
SnorkelFREE SHIPPING
within 48 US StatesDobinsons Land Cruiser 200 Series Snorkel Kit for 2008-2015
- 200 Series Snorkel Kit – Suits Toyota Land Cruiser 200 Series 2008-2015 Models
- Smooth body, no writing or logos on the body
- Rotationally molded using precision CNC shaped aluminum dies
- Increases air intake height to allow safer water crossings and reduce dust intake
- Increased air intake height rams cooler, cleaner air into the engine increasing engine performance
- The higher the intake, the less dust is in the air
- Manufactured from high quality UV resistant LLDPE
- Snorkel Kits include template and all mounting hardware
- Installation Instructions
(6 reviews) -
ARB
OME 2850 Front Coil Springs | Land Cruiser 80 and 105 Series – Pair
- OME Part Number 2850
- Bar Size : 16.5 mm
- Free Height : 495/505 mm
- Number of Turns : 9.0
- Coil Weight (each): 6.2 Kg | 13.6 lbs
- Spring Rate : 220 lbs
- Sold in Pairs
(25 reviews) -
ARB
OME 2864 Rear Coil Springs | Land Cruiser 80 and 100 Series – Pair
- OME Part Number 2864
- Bar Size : 19 mm
- Free Height : 480/490 mm
- Number of Turns : 7.2
- Coil Weight (each): 7.8 Kg | 17.2 lbs
- Spring Rate : 320 lbs
- Sold in Pairs
(22 reviews) -
ARB
OME 2863 Rear Coil Springs | Land Cruiser 80 and 100 Series – Pair
- OME Part Number 2863
- Bar Size : 18 mm
- Free Height : 505/515mm
- Number of Turns : 7.0
- Coil Weight (each): 6.9 Kg | 15.8 lbs
- Spring Rate : 250 lbs
- Sold in Pairs
(20 reviews) -
Performance Upgrades - 100 SeriesFREE SHIPPING
within 48 US StatesPowerbrake D-Line HP Rotor and Pad Kit | 100 Series Front
- Suits Toyota Land Cruiser 100 Series 1998-2007 Front and Lexus LX470 1998-2007 Front
- Powerbrake D-Line Features
- Rotors are cast from a proprietary high carbon cast-iron alloy.
- Rotors are machined to tolerances up to three times tighter than the industry norm.
- All Powerbrake rotors feature our MTR (Max Temperature Recording) system.
- Proprietary black disc surface coating ensures quicker bed-in and max brake performance.
- Spiral slots on the rotor fiction surface clear friction gasses, debris and water.
- Matched high friction PB05 brake pads take the guesswork out of pad selection.
- Pad compound PB05 is manufactured in Japan and has been specifically formulated for use on 4×4 vehicles
- Powerbrake D-Line Benefits at a Glance
- Reduced stopping distances in both wet and dry conditions.
- Reduced brake fade and improved brake consistency.
- Improved initial brake response (bite).
- Improved brake modulation particularly during emergency stops.
- Improved resistance to rotor distortion (warping) and cracking at high temperatures.
- What’s Included in Powerbrake D-Line?
- 2 x Standard OEM diameter high performance slotted rotors for your 4WD or truck – Made in South Africa.
- An axle set of matched PB05 high-performance brake pads – Made in Japan.
- Fits as per a standard rotor and pad change, using the vehicle’s original calipers.
(3 reviews) -
Performance Upgrades - 80 SeriesFREE SHIPPING
within 48 US StatesPowerbrake D-Line HP Rotor and Pad Kit | 80 Series Front
- Suits Toyota Land Cruiser 80 Series 1990-1997 and Lexus LX450 Front
- Powerbrake D-Line Features
- Rotors are cast from a proprietary high carbon cast-iron alloy.
- Rotors are machined to tolerances up to three times tighter than the industry norm.
- All Powerbrake rotors feature our MTR (Max Temperature Recording) system.
- Proprietary black disc surface coating ensures quicker bed-in and max brake performance.
- Spiral slots on the rotor fiction surface clear friction gasses, debris and water.
- Matched high friction PB05 brake pads take the guesswork out of pad selection.
- Pad compound PB05 is manufactured in Japan and has been specifically formulated for use on 4×4 vehicles
- Powerbrake D-Line Benefits at a Glance
- Reduced stopping distances in both wet and dry conditions.
- Reduced brake fade and improved brake consistency.
- Improved initial brake response (bite).
- Improved brake modulation particularly during emergency stops.
- Improved resistance to rotor distortion (warping) and cracking at high temperatures.
- What’s Included in Powerbrake D-Line?
- 2 x Standard OEM diameter high performance slotted rotors for your 4WD or truck – Made in South Africa.
- An axle set of matched PB05 high-performance brake pads – Made in Japan.
- Fits as per a standard rotor and pad change, using the vehicle’s original calipers.
(3 reviews) -
Bump Stops - 200 SeriesFREE SHIPPING
within 48 US StatesTimbren Bump Stops Front & Rear | 200 Series Land Cruiser
- Suits 2008-2021 Land Cruiser 200 Series
- Includes both Front and Rear bump stops for the whole vehicle
- Active Off-Road Bumpstops provide off-road enthusiasts greater control over their vehicles’ suspension travel. Using progressive-rate springs means that instead of a hard stop at the end of axle travel the axle energy will be absorbed when bottoming-out producing smooth, predictable, and quiet axle engagement and disengagement.
- Unlike OEM bump stops, Active Off-Road Bumpstops are made from natural rubber. Just like our Timbren SES line, Active Off-Road Bumpstops carry a lifetime warranty and a satisfaction guarantee.
- ABSTORLC2 replaces the rear OEM bump stops and ABSTOF replaces the fronts on the Land Cruiser 200 Series. Upgrade to Active Off-road Bumpstops and experience the difference.
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation
- Satisfaction Guarantee
- Lifetime Warranty
- Front Instructions and Rear Instructions
(14 reviews) -
200 Series Land Cruiser ARMORED
Dobinsons C59-586 B7 1500KG Armored Land Cruiser 200 Series Front Coils – Pair
- C59-586 – Front Coils for Level B7 Armor with 1500KG of additional weight over stock – 200 Series Land Cruiser
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish.
- Sold as a Pair – marked side specific for installation
(1 review) -
200 Series Land Cruiser ARMORED
Dobinsons C59-566 B7 1100KG Armored Land Cruiser 200 Series Front Coils – Pair
- C59-566 – Front Coils for Level B7 Armor with 1100KG of additional weight over stock – 200 Series Land Cruiser
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish.
- Sold as a Pair – marked side specific for installation
(2 reviews) -
Sequoia 3rd Gen (2023-2024+)Dobinsons C59-823V Rear Coil Springs Pair
- Dobinsons C59-823V Rear Coils for the 2023+ Toyota Sequoia
- Lifts 2″ with 440LBS constant load on a standard model and 1″ with 440LBS constant load on a TRD Pro (TRD Pro comes 1″ lifted from the factory)
- This also fits the 2021+ Land Cruiser 300 Series, gives 30mm lift with 280-400KG constant added weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- Variable Rate Coils
- Longer shocks required, the factory shocks are not long enough to run with these coils
- Select from Twin Tube, IMS Monotube or MRA 3-Way Adjustable with Remote Resi
(2 reviews)$305.00 Select options This product has multiple variants. The options may be chosen on the product page -
200 Series Land Cruiser ARMORED
Dobinsons C59-587 B7 1400-1500KG Armored Land Cruiser 200 Series Rear Coils – Pair
- C59-587 – Level B7 Armor with 1400-1500KG of additional weight over stock – 200 Series Land Cruiser
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish.
- Sold as a Pair – marked side specific for installation
(2 reviews) -
200 Series Land Cruiser ARMORED
Dobinsons C59-567 B7 1200-1300KG Armored Land Cruiser 200 Series Rear Coils – Pair
- C59-567 – Level B7 Armor with 1200-1300KG of additional weight over stock – 200 Series Land Cruiser
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish.
- Sold as a Pair – marked side specific for installation
(3 reviews) -
55 Series (1970-80)
Dobinsons Toyota Land Cruiser FJ55 Front Leaf Springs Pair 1970-1980
- Front Leaf Springs for the Toyota Land Cruiser FJ55 1970-1980
- 45mm (1.75″) rear lift
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride
- Made in Australia
- Sold as a pair, springs only
- Bushings and u-bolts are linked down in the description
(3 reviews)
