Land Cruiser

Showing 361–390 of 434 resultsSorted by popularity

300 Series Land Cruiser (2021+)
FREE SHIPPING
within 48 US States
Dobinsons 300 Series Land Cruiser IMS Lift Kit (0-3″ Lift)
- Suits Toyota Land Cruiser 300 Series from 2022 onwards (not sold in the USA)
- Upgrade your suspension from stock height up to 3″ of lift with all new Dobinsons parts
- Shocks Do Not Suit Sahara ZX And GR Sport Models With Factory Electronic Shock Absorbers
- Complete IMS suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
- Coils springs are marked with white labels – DO NOT REMOVE – and they are also side specific!!
- Base kit Includes 2 Front IMS Struts, 2 Rear IMS Shocks, and 4 Coil Springs
- Australian Center-of-Hub to Fender original measurements are as follows: (compare to your vehicle for correct lift height estimate)
  
  Front: 20.25″
  
  Rear: 22.5″
Rated 5.00 out of 5
(3 reviews)
From $1,910.00 Select options
On Backorder
250 Series Land Cruiser (2024-2025+)
FREE SHIPPING
within 48 US States
Dobinsons MRA59-A660 3-Way Adjustable Front Struts Pair
- Suits 2024+ Toyota Land Cruiser 250 Series and Lexus GX550
- Can be used with OEM coils or with Dobinsons lifted coils
- Height adjustable with a fully threaded body
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- SOLD IN PAIRS
- Full 2 year limited warranty, no set rebuild time period
- Does not include coil springs or top mounts – sold separately
- Must mount the banjo fitting and hose inwards on MRA struts
- Installation Instructions
- Coil seat for MRA59-A660 should be set at 237mm (9.3″) from the strut bushing eye
- Photos for illustration purposes only
(0 reviews)
$1,410.00 Add to cart
On Backorder
Dobinsons
ETA is Spring 2025
Dobinsons C59-818 Front Coil Springs Pair
- Suits Toyota Land Cruiser 300 Series – Stock Height / 110-220lb Constant Front End Load, and 2024+ Toyota Land Cruiser 250 Series – 3.0″ lift with stock weight, or 2.5″ lift with 110-220LBS constant added weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 420mm free height, 18mm wire diameter, 508 LBF/in spring rate
- Sold in Pairs
(0 reviews)
$270.00

Coil Color Clear

Dobinsons C59-818 Front Coil Springs Pair quantity

Select options This product has multiple variants. The options may be chosen on the product page
Dobinsons
Dobinsons C59-822 Front Coil Springs Pair
- Suits Toyota Land Cruiser 300 Series – Lifts 50mm – 2″ / 110-150lb Constant Front End Load
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 445mm free height, 19mm wire diameter, 508 LBF/in spring rate
- Sold in Pairs
(0 reviews)
$270.00
Coil Color Clear

Dobinsons C59-822 Front Coil Springs Pair quantity
Select options This product has multiple variants. The options may be chosen on the product page
Dobinsons
Dobinsons C59-820 Front Coil Springs Pair
- Suits Toyota Land Cruiser 300 Series – Lifts 50mm – 2″ / Stock Load
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 445mm free height, 18mm wire diameter, 485 LBF/in spring rate
- Sold in Pairs
(0 reviews)
$270.00
Coil Color Clear

Dobinsons C59-820 Front Coil Springs Pair quantity
Select options This product has multiple variants. The options may be chosen on the product page
300 Series Land Cruiser (2021+)
FREE SHIPPING
within 48 US States
Dobinsons MRA59-A440 3-Way Adjustable Front Struts Pair
- Suits 2022+ Toyota Land Cruiser 300 Series (not sold in the USA) and Lexus LX600, and is an Extended Travel option for 2024+ Land Cruiser 250 Series and Lexus GX550
- Can be used with OEM coils or with Dobinsons lifted coils
- Height adjustable with a fully threaded body
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- SOLD IN PAIRS
- Full 2 year limited warranty, no set rebuild time period
- Does not include coil springs or top mounts – sold separately
- Must mount the banjo fitting and hose inwards on MRA struts
- Coil seat for MRA59-A440 should be set at 237mm (9.3″) from the strut bushing eye
- Specifications – 624mm extended, 453mm compressed
- Photos for illustration purposes only
- Installation Instructions
- Note: If installed on a Toyota Land Cruiser 250 Series or Lexus GX550, a diff drop kit and aftermarket UCA’s must be run to prevent CV bind and coil spring contact at full droop
(0 reviews)
$1,410.00 Add to cart
80 Series Land Cruiser (1990-1997)
Dobinsons C59-221VB Stock Height Rear Coil Springs | Land Cruiser 80 series – Pair Black
- Suits Land Cruiser 80 Series and Lexus LX450
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – BLACK
- 460/470mm free height, 17mm wire, variable rate
- Sold in Pairs
(0 reviews)
$270.00 Add to cart
On Backorder
80 Series Land Cruiser (1990-1997)
Dobinsons C59-210VB Front Coil Springs | Land Cruiser 80 series Progressive Rate (Stock Height) – Pair Black
- uits Land Cruiser 80 Series and Lexus LX450
- C59-210V are Front Progressive / Variable rate coils (stock height) with no additional accessory weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – BLACK
- 475/485mm free height, 16mm wire, variable rate
- Sold in Pairs
(0 reviews)
$270.00 Add to cart
On Backorder
80 Series Land Cruiser (1990-1997)
Dobinsons C59-169B Rear Coil Springs | Land Cruiser – Pair Black
- 80 SERIES (1990-1997) and Lexus LX450 – Dobinsons C59-169 1.75″ with up to 220lbs weight
- 100 SERIES (1998-2007) and Lexus LX470 – Dobinsons C59-169 – 1″ lift, linear rate, with stock weight. For slightly above OE stock height. Ideal if someone is doing AHC removal but doesn’t want to add lift
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – BLACK
- Sold in Pairs
- 465/475mm free height, 227 LB spring rate
(0 reviews)
$270.00 Add to cart
On Backorder
Powerbrake
FREE SHIPPING
within 48 US States
Powerbrake X-Line 70 Series Land Cruiser Front Big Brake Kit 1990-1999
Suits:
- 1990-1999 Land Cruiser 70 Series – LJ70, LJ72, LJ73, LJ77, RJ70, RJ73, KZJ70 KZJ73 (square headlights)
- 1990-1999 Land Cruiser 70 Series – HZJ70, HZJ73, PZJ70, PZJ73
- 1990-1999 Land Cruiser 75 Series – FZJ75, HZJ75
1990-1999 Toyota Land Cruiser 70 Series Big Brake Kit Includes:
- Suits 6-stud wheel pattern
- X-Line billet 6-piston off-road calipers (pair)
- High-performance brake pads, pre-loaded into the calipers
- 1-Piece 13″ 72-vane rotors
- Semi-float disc drive system allows for radial disc expansion and contraction
- Curved, directional cooling vanes
- Billet caliper mounting brackets
- Stainless steel braided brake lines
- Provided brake lines connect the caliper to the axle housing
- All necessary mounting hardware for quick, easy bolt-on installation
- Comprehensive fitment and bed-in instructions
- Includes Powerbrake Pads, PB05 Compound – highest level 4×4 brake pads available – made in Japan
- Manufactured, finished and packaged 100% in South Africa
- REQUIRES 16″+ WHEELS FOR ADEQUATE CALIPER CLEARANCE
(0 reviews)
$2,570.00 Select options
On Backorder
Powerbrake
FREE SHIPPING
within 48 US States
Powerbrake X-Line 70 Series Land Cruiser Front Big Brake Kit 1984-1989
Suits:
- 1984-1989 Land Cruiser 70 Series – Bundera – LJ70, LJ73, RJ70, RJ73 (round headlights, coils up front)
- 1985-1989 Land Cruiser 70 Series – FJ70, BJ70, BJ71, FJ73, BJ73, FJ74, BJ74 (round headlights, leaf springs up front)
- 1985-1989 Land Cruiser 75 Series – FJ75, HJ75, BJ75
1984-1989 Toyota Land Cruiser 70 Series Big Brake Kit Includes:
- Suits 6-stud wheel pattern
- X-Line billet 6-piston off-road calipers (pair)
- High-performance brake pads, pre-loaded into the calipers
- 1-Piece 13″ 72-vane rotors
- Semi-float disc drive system allows for radial disc expansion and contraction
- Curved, directional cooling vanes
- Billet caliper mounting brackets
- Stainless steel braided brake lines
- Provided brake lines connect the caliper to the axle housing
- All necessary mounting hardware for quick, easy bolt-on installation
- Comprehensive fitment and bed-in instructions
- Includes Powerbrake Pads, PB05 Compound – highest level 4×4 brake pads available – made in Japan
- Manufactured, finished and packaged 100% in South Africa
- REQUIRES 16″+ WHEELS FOR ADEQUATE CALIPER CLEARANCE
(0 reviews)
$2,570.00 Select options
On Backorder
Performance Upgrades - 60 Series
FREE SHIPPING
within 48 US States
Powerbrake X-Line 60 Series Land Cruiser Front Big Brake Kit
1980-1990 Toyota Land Cruiser 60 and 62 Series Big Brake Kit Includes:
- X-Line billet 6-piston off-road calipers (pair)
- High-performance brake pads, pre-loaded into the calipers
- 1-Piece 13″ 72-vane rotors
- Semi-float disc drive system allows for radial disc expansion and contraction
- Curved, directional cooling vanes
- Billet caliper mounting brackets
- Stainless steel braided brake lines
- Provided brake lines connect the caliper to the axle housing
- All necessary mounting hardware for quick, easy bolt-on installation
- Comprehensive fitment and bed-in instructions
- Includes Powerbrake Pads, PB05 Compound – highest level 4×4 brake pads available – made in Japan
- Manufactured, finished and packaged 100% in South Africa
- REQUIRES 16″ WHEELS FOR ADEQUATE CALIPER CLEARANCE
(0 reviews)
$2,570.00 Select options
Suspension
OMESD23 Steering Damper | Land Cruiser 40 45 46 47 55 series
- Suits Toyota Landcruiser 40 45 46 47 and 55 series (all years and variants of these models)
- Nine Stage Coil Spring Valving For Optimum Performance
- A 15mm Piston Rod Provides Improved Strength
- Stone Guard Protects Piston Rod Against Stone Damage
- A 35mm Piston And Bore Allows Increased Oil Volume
- Twin Tube Design Protects Internal Components Against Stone Damage
- Multi-Lip Seal Prevents Oil Loss
- Original Stabilizer Mounts May Be Used Where Appropriate
- Photo for illustration purposes
Rated 4.87 out of 5
(15 reviews)
$101.00 Add to cart
45 Series Land Cruiser - FJ45, HJ47, BJ45, BJ46 (post 8/1980)
Dobinsons Full Suspension Kit for Land Cruiser FJ45 HJ47 BJ45 BJ46 1980-1984
- For 1980-1984+ Model Toyota Land Cruiser FJ45 HJ47 BJ45 BJ46 with 35mm spring eye size front and rear
- Lifts 40mm (1.6″) Front and Rear
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- Make your selections below for how complete of a kit you would like to make
- No parts are included if you don’t select them
Rated 5.00 out of 5
(5 reviews)
From $1,560.00 Select options
45 Series Land Cruiser - FJ45, HJ47, BJ45, BJ46 (post 8/1980)
Dobinsons HJ47-8L-F Front Leaf Springs Pair for 1980+ FJ45 HJ47 BJ45 BJ46
- Suits 1980+ Toyota Land Cruiser FJ45 HJ47 BJ45 BJ46 models with 35mm eyes
- Gives 40mm lift with up to 90LBS constant weight on a FJ45 HJ47 BJ45 BJ46
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Sold as a pair – bushings, u-bolts and all other parts sold separately
- Photo for illustration purposes only
Rated 5.00 out of 5
(4 reviews)
$470.00 Add to cart
45 Series Land Cruiser - FJ45, HJ47, BJ45, BJ46 (post 8/1980)
Dobinsons Heavy Load Rear Leaf Springs Pair for 1980+ Land Cruiser 45 46 47 Series
- Suits 1980-1984 Toyota Land Cruiser FJ45, HJ47, BJ45, BJ46 with 35mm spring eyes
- Gives 40mm of lift with up to 440LBS+ constant rear end constant weight added
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Sold as a pair (1 left and 1 right side) – bushings, u-bolts and all other parts sold separately
- Photo for illustration purposes only
Rated 5.00 out of 5
(5 reviews)
$860.00 Add to cart
45 Series Land Cruiser - FJ45, HJ47, BJ45, BJ46 (post 8/1980)
Dobinsons Medium Load Rear Leaf Springs Pair for 1980+ Land Cruiser 45 46 47 Series
- Suits 1980-1984 Toyota Land Cruiser FJ45, HJ47, BJ45, BJ46 with 35mm spring eyes
- Gives 40mm of lift with up to 220LBS+ constant rear end weight
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Sold as a pair (1 left and 1 right side) – bushings, u-bolts and all other parts sold separately
- Photo for illustration purposes only
Rated 5.00 out of 5
(5 reviews)
$760.00 Add to cart
Dobinsons
FREE SHIPPING
within 48 US States
Dobinsons WA59-512K 2.5° Front Poly Caster Bushing Kit | Land Cruiser LJ70 LJ73 RJ70 RJ73
- For 11/84 to 12/89 Toyota 70 Series Bundera models, LJ70, LJ73, RJ70 and RJ73 with Round Headlights
  
  For 0″ to 2.5″ of lift, Recommended when replacing 20+ year old suspension parts
  
  Contains all 4 bushings for the front of the radius arm to axle
  
  Complete with steel inner sleeve
  
  This kit is a must for any lifted Landcruiser so that the steering control is correct giving you the best ride quality possible
  
  Photo for illustration purposes
Rated 5.00 out of 5
(9 reviews)
$360.00 Add to cart
Bundera LJ70/LJ73 - 84-89 - Round Headlights
Dobinsons C59-405 Rear Coils for Toyota Land Cruiser Bundera 70 Series 11/84-12/89
- For 11/84 to 12/89 Toyota 70 Series Bundera models, LJ70, LJ73, RJ70 and RJ73 with Round Headlights
- These lift 2.5″ with 220LBS of constant added weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
Rated 5.00 out of 5
(20 reviews)
$270.00 Add to cart
Bundera LJ70/LJ73 - 84-89 - Round Headlights
Dobinsons C59-404 Front Coils for Toyota Land Cruiser Bundera 70 Series 11/84-12/89
- For 11/84 to 12/89 Toyota 70 Series Bundera models, LJ70, LJ73, RJ70 and RJ73 with Round Headlights
- These lift 2.5″ with the added weight of a bumper and winch, of 110-220lbs added constant weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
Rated 5.00 out of 5
(15 reviews)
$270.00 Add to cart
Bundera LJ70/LJ73 - 84-89 - Round Headlights
Dobinsons C59-082 Front Coils for Toyota Land Cruiser Bundera 70 Series 11/84-12/89
- For 11/84 to 12/89 Toyota 70 Series Bundera models, LJ70, LJ73, RJ70 and RJ73 with Round Headlights
- These lift 1.75″ with the added weight of a bumper and winch, of 110-220lbs added constant weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
Rated 5.00 out of 5
(16 reviews)
$270.00 Add to cart
Tacoma 4th Gen (2024-2025+)
FREE SHIPPING
within 48 US States
Tax Return Sale, 10% off
Use Coupon TAXTIME
Icon Billet UCA DJ Pro Pair for 2024+ Tacoma + Land Cruiser 250 + GX550
- Suits 2024+ Toyota Toyota Tacoma and Land Cruiser 250 and Lexus GX550
- CNC machined 6061 billet aluminum construction with satin anodized finish
- Corrects suspension geometry and allows for proper wheel alignment on Tacomas or Land Cruisers with up to 3” of lift
- Quick, precise, on-vehicle adjustment for both caster and camber
- Delta Joint PRO allows maximum articulation without binding
- Delta Joint PRO is 100% serviceable and rebuildable
- FK Rod Ends at chassis pivots for strength and precision driving characteristics
- Built in O-ring sealed dust cover cap
- Installation Manual
- Warranty Info
(0 reviews)
$1,399.95 Add to cart
Upper Control Arms
FREE SHIPPING
within 48 US States
Tax Return Sale, 10% off
Use Coupon TAXTIME
Icon Tubular UCA DJ Pro Pair for 2024+ Tacoma + Land Cruiser 250 GX550
- Suits 2024+ Toyota Toyota Tacoma and Land Cruiser 250 and Lexus GX550
- Features patented ICON Delta Joint (U.S. Pat. 10,731,700)
- Built in added caster for better handling on lifted vehicles
- Delta Joint PRO allows maximum articulation without binding
- Delta Joint PRO is 100% serviceable and rebuildable
- Serviceable dual stage polyurethane pivot bushings
- CNC machined housings for bushings and Delta Joint PRO
- 1026 DOM tube construction with black powder coat finish
- Includes billet dust caps for Delta Joint PRO
- Warranty Info
(0 reviews)
$849.95 Add to cart
Trail-Gear
Land Cruiser 80 Series Winch Mount 1990-1997
- Suits 1990-1997 Toyota Land Cruiser 80 Series and Lexus LX450
- Winch Mount is made from 1/4″ CNC-formed steel plate
- Use this winch mount as a base to build your own bumper, adding tubes or plates off the sides
- Mounting holes on the winch plate are drilled for most 5000-9500 model low-profile winches and smaller-sized 9.0R Warn competition winches
- Features a shackle receiver mount that will make a great anchor point for winch or strap recoveries
- Unpainted steel finish
- Made in the USA
- Ships by UPS Ground
- Installation Instructions
- We offer a large variety of Winches as well
Rated 5.00 out of 5
(9 reviews)
$276.00 Add to cart
Tacoma 4th Gen (2024-2025+)
FREE SHIPPING
within 48 US States
Tax Return Sale, 10% off
Use Coupon TAXTIME
Icon 2024 Toyota LC250 / Tacoma Diff Drop Kit
- Suits 2024+ Toyota Tacoma and 2024+ Land Cruiser 250
- Drops front differential to provide better maximum operating angle for CV joints
- Maximizes available suspension travel when paired with ICON coilovers
- CNC laser cut, precision brake-formed steel bracketry with durable black powder coat finish
- Polyurethane bushings limit deflection and prevent differential movement under load
- 100% Bolt-on with no cutting or welding necessary for installation
- Required for installation of ICON coilover kits on 4WD 2024 Toyota Tacoma and Land Cruiser 250 models and GX550
- Installation Guide
(0 reviews)
$230.95 Add to cart
100 Series Land Cruiser IFS (1998-2007)
FREE SHIPPING
within 48 US States
Powerbrake X-Line Front Land Cruiser 100 Series Big Brake Kit 1998-2007
1998-2007 Toyota Land Cruiser 100 Series Big Brake Kit Includes:
- X-Line billet 6-piston off-road calipers (pair)
- High-performance brake pads, pre-loaded into the calipers
- 1-Piece 13.7″ x 1.33″ 48-vane discs
- 48 Curved, directional cooling vanes
- Billet caliper mounting brackets
- Stainless steel braided brake lines
- All necessary mounting hardware for quick, easy bolt-on installation
- Comprehensive fitment and bed-in instructions
- Now Includes Upgraded Powerbrake Pads, PB05 Compound – highest level 4×4 brake pads available – made in Japan
- Manufactured, finished and packaged 100% in South Africa
- REQUIRES 17″ WHEELS FOR ADEQUATE CALIPER CLEARANCE
- Photos are used to show detail and appearance, actual product for this vehicle may vary
Rated 5.00 out of 5
(10 reviews)
$2,675.00
Caliper Color Clear

Powerbrake X-Line Front Land Cruiser 100 Series Big Brake Kit 1998-2007 quantity
Select options This product has multiple variants. The options may be chosen on the product page
Sale!
Roof Racks
RCI Low-Pro Truck Bed Bars
- Super low profile (low pro) bed rack set to mount all sort of gear or a Roof Top Tent
- For Trucks Such As: Jeep Gladiator, Toyota Tacoma, Nissan Frontier, Ford Ranger, Chevy Colorado, GMC Canyon, Ford F150, Toyota Tundra, etc
- Utilizing 2 crossmembers spanning the truck bed, these bed bars have a high weight capacity and provide even weight distribution on the trucks bed side rails
- Bolts to inside of bed rails or can alternatively be mounted with optional “drill-free” clamps to mount like a truck topper (Not applicable when bolting to accessory rail systems)
- Bars are 3.5″ tall from bed rail to top of bars
- Adjustable width adapts to any truck bed from 54″- 69″ width between the bed rails
- Can be positioned up to 58″ apart (front to back)
- Using these bars will minimize the aerodynamic drag normally associated with roof top tents by keeping it below the roof-line
- Slotted mounting points on top of rack accept nearly any roof top tent making mounting a breeze
- Heavy duty black textured powder coat finish comes standard, plus we take it a step further and coat all racks with an epoxy primer. This extra step is expensive and time consuming but ensures our paint job will outlast anything else in the industry!
- Easy bolt together assembly, takes about 15 minutes to install with only a few basic hand tools
- All hardware for installation is included
- INSTALL GUIDE
- Made in Loveland, Colorado USA
Rated 5.00 out of 5
(5 reviews)
Original price was: $399.99.Current price is: $274.99. Select options
Excluded
Dobinsons HZJ75-8L-F Front Heavy Load Leaf Springs Pair
- Front Heavy Load Leaf Springs for the Toyota – FZJ77, HZJ77, PZJ77 from 1993-1999, 70 Series – HZJ70, HZJ73, PZJ70, PZJ73 1990-1999, 75 Series – FZJ75, HZJ75 1990-1999
- 45mm front lift with 110-220LBS constant front end weight (bumper, winch, etc)
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Sold as a pair
Rated 5.00 out of 5
(4 reviews)
$480.00 Add to cart
Control Arms - Tundra 2022+
FREE SHIPPING
within 48 US States
Tax Return Sale, 10% off
Use Coupon TAXTIME
Icon Billet Rear Upper Trailing Arms Pair | Tundra Sequoia Tacoma LC250 GX550
- Suits 2022-2025+ Tundra and 2023-2025+ Sequoia and 2024-2025+ Tacoma 4×4 Models and 2024-2025+ Toyota Land Cruiser 250 and Lexus GX550
- On vehicle adjustment for different ride heights and pinion angles using ICON’s Double Adjuster System
- CNC machined 6061 aluminum construction
- Large FK Bearing JMX16T PTFE-lined rod ends
- Maintenance free, dual durometer bushings for maximum angularity and noise isolation
- Covered by ICON’s Limited Lifetime Warranty
- Installation Guide
- Warranty Info
Rated 5.00 out of 5
(11 reviews)
$1,029.95 Add to cart
200 Series Land Cruiser (2008-2021)
FREE SHIPPING
within 48 US States
Tax Return Sale, 10% off
Use Coupon TAXTIME
Icon Billet Lower Trailing Arm Pair | 4Runner FJ Cruiser GX470 GX460 LC200
- Suits 2003-2009 4Runner, 2010-2024 4Runner, FJ Cruiser (all years), Lexus GX470 and Lexus GX460, Lexus LX570 and 200 Series 2008-2021
- On vehicle length adjustment for different ride heights and pinion angles using ICON’s Double Adjuster System
- Vehicle specific, high clearance design for reduced link contact with obstacles
- Replaceable Nylon ROCK Slider to protect the link from damage
- CNC machined 6061 aluminum construction
- Large FK Bearing JMX16T PTFE-lined rod ends
- Greaseable, multi-piece polyurethane bushings for maximum angularity and noise isolation
- Covered by ICON’s Limited Lifetime Warranty
- Sold as a Pair
- Installation Guide
- Warranty Info
Rated 5.00 out of 5
(7 reviews)
$929.95 Add to cart