Your cart is currently empty!
Toyota
Showing 541–570 of 1158 resultsSorted by popularity
-
80 Series Land Cruiser (1990-1997)Toyota FJ80 Knuckle Rebuild Kit with Bearings
- Suits Toyota Land Cruiser 80 Series and Lexus LX450 (all years)
- Our FJ80 knuckle rebuild kit contains all of the replacement parts you need to service your steering knuckles including gaskets, felts, seals, spindle nut & washers, and shims
- New spindle bushings, trunnion bearings, and steel outer felt covers are also included
- The stamped steel outer felt covers are not found in other most other kits
- If you’re using your FJ80 in the rocks you will want to replace these covers when you service the knuckles
- The FJ80 Knuckle kit has all the parts you need to service both left and right knuckles
- Includes new wheel bearings
(9 reviews) -
Differential | Drivetrain
Ultimate Toyota Knuckle Rebuild Kit
- Suits TOYOTA PICKUP (1979-1985), TOYOTA 4RUNNER (1985), TOYOTA LAND CRUISER FJ40 (1979-1983), TOYOTA LAND CRUISER FJ50 (1979-1980), TOYOTA LAND CRUISER FJ60 (1980-1990), TOYOTA LAND CRUISER FJ70 – Models with 4-stud knuckles only (1984-CURRENT)
- The Ultimate Toyota Knuckle Rebuild Kit includes gaskets, upgraded seals, high-quality bearings and more. We’ve even included the specialty tools needed to complete the job. Simply put, this is the best, most complete knuckle rebuild kit available!
- Includes:
- (1) 54mm Spindle Socket
- (1) Knuckle Pull Scale
- (1) Upgraded HD Inner Axle Seals
- (2) Koyo* Front Wheel Bearing Kits (Includes 2 Inner and 2 Outer Bearings and 2 Spindle Seals)
- (1) Trail-Safe Wiper Seals with Rock Rings and Extended Hardware
- (2) Brass Spindle Bushings
- (2) Wheel Bearing Nut Kits
- (1) Spindle Stud Kit
- (4) Koyo** Trunnion Bearings
- (1) Trunnion Bearing Shim Pack
- (2) Inner Steel Rings that go behind the Wiper Seals
- (2) Inner Spindle Gaskets
- (2) Outer Spindle Gaskets
- (2) Hub Inner Gaskets
- (2) Hub Outer Gaskets
- (2) Hub Dial O-Rings for Aisin Hubs
- (1) Toyota Ultimate Backing Plate Eliminator Kit
- * Some kits may contain Timken bearing kits when Koyo bearings are not available.
- ** Some kits may contain Schaeffler/FAG trunnion bearings when Koyo bearings are not available.
- Does not fit FJ80 Land Cruiser front axles
(8 reviews) -
Sequoia 2nd Gen (2008-2022)FREE SHIPPING
within 48 US StatesDobinsons 3-Way Adjustable MRA Sequoia Lift Kit 2.0″-3.0″ | 2008-2022
- Suits 2008-2022 Toyota Sequoia 4×4 Models
- The front coilovers can be run from 2″ to 3″ of lift and anywhere in between
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- Looking for a quick and easy way to lift your Sequoia? This is your answer
- Coils are teal. Struts are black
- Includes C92-3016650 Front Coil Springs, Inner Diameter – 3.0″, Length – 16″, Spring Rate – 650lb/in
- All are assembled at the standard coil seat height, you adjust on the vehicle to the height you’d like
- The Dobinsons MRA Coilovers will come pre-assembled with new struts, coils and top mounts and hardware
- Choose what rear height you’d like to go with the front
- Fully rebuildable and re-valvable
- SOLD IN PAIRS – READY TO BOLT IN
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Requires lower mount clearancing to fit the larger lower leg of the new coilover (see attached photo)
- See attached photo for correct hose routing
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Reservoir Brackets and Hardware and Sticker Pack
- Full 2 year limited warranty, no set rebuild time period
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle
- New UCA’s are required for proper coilover and hose clearance, see all options
- Aftermarket wheels with +18 Offset or less REQUIRED to avoid reservoir + hose rubbing at full lock
- Front coilover assembly instructions
- Does not suit air suspension equipped models
(9 reviews) -
Sequoia 2nd Gen (2008-2022)FREE SHIPPING
within 48 US StatesDobinsons MRA59-A713 3-Way Adjustable Rear Shocks Pair | Sequoia 2008-2022
- Suits Toyota Sequoia 2008-2022
- 3-way adjustable valving – Adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
(13 reviews) -
Tundra 3rd Gen (2022-2025+)FREE SHIPPING
within 48 US StatesDobinsons Adjustable Rear Lower Control Arms Pair for Tundra + Tacoma
- Suits all 2022-2025+ Toyota Tundra and 2024-2025+ Toyota Tacoma
- Comes with high quality rubber OE style bushings installed for maximum flexibility, and zero noise
- Made from HSLA (High Strength Low Alloy) Steel
- 40mm OD and 6mm wall thickness with support brace
- Oversized adjusters and rod thickness for maximum strength and durability with double-nut locking feature
- Zinc plated, then E-coated black, for the ultimate finish and protection
- Sold as a pair
(4 reviews) -
Tundra 3rd Gen (2022-2025+)
Dobinsons C59-836 Front Springs | Toyota Tundra 2022+ Sequoia 2023+ (110-220LBS) – Pair
- Suits Toyota Tundra 2022-2025+ and Sequoia 2023-2025+
- Lifts the front Tundra 2.0″ and Sequoia 3.0″ with 110-220LBS of constant weight
- Fully Designed, Manufactured, and Finished In Australia
- These will NOT suit a TRD PRO
- Hybrid Models lift 1-1.5″ less lift than listed here
- TRD Pro came with 1″ of lift, so subtract that if you’re changing to a full Dobinsons kit
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 420mm free height, 794LBF/in spring rate
- Sold in Pairs
(14 reviews)$305.00 Select options This product has multiple variants. The options may be chosen on the product page -
All Pro OffroadFREE SHIPPING
within 48 US StatesToyota Tundra Overland Tailgate Table (2022-2025+)
- The stock tailgate panel is a wasted opportunity that you can easily correct with the All-Pro Off-Road Overland Tailgate Table.
- The All-Pro Off-Road Overland Tailgate Table turns your opened tailgate into a multi-functional platform for all of your overlanding, camping, fishing, and hunting needs.
- The durable food-grade polyethylene cover can be used as a cutting board while supporting your favorite camp stove.
- A slot on the left side and cup-holders on the right side prevent items from rolling away.
- Requiring only basic hand tools, reusing original hardware, and 3-minutes of time, this is one of the easiest modifications you will ever make on your truck and one every Tundra owner should do.
- Features a ruler in 1-inch (imperial) increments along the edge of the table adding convenience when measuring fish, rope, etc.
- Made in 2 different styles, choose from the divided cutting board configuration, or the smooth configuration with only round cutouts on the end.
- Thickness is right at 1/2″
- Scroll down on the page to see a full product video!!
- Made in the USA, in sunny California!!
(6 reviews) -
4Runner 4th Gen (2003-2009)FREE SHIPPING
within 48 US StatesRCI Engine Skid Plate | 03-09 4Runner GX470 FJ Cruiser
- Fits Toyota FJ Cruiser 2006-2009 models, 2003-2009 Toyota 4Runner, 2003-2009 Lexus GX470 non-KDSS models
- Includes front skid plate ONLY
- Protects front two cross-members, low hanging front differential, oil pan, transmission, second and third cross-members, exhaust cross pipe, and transfer-case
- Excellent addition or replacement of weak, lightweight OEM skid plates
- Simple installation and removal of all subsections for maintenance
- Built in oil drain holes allow easy access and ability to change oil without removal of plate
- Engine skid plates come standard with center mounting posts for substantially increased strength
- Engine skid plate includes differential drop cage for maximum security and ground clearance, PLUS this feature allows the use of differential drop kits without having to space the skid plate down
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Smooth, flat surface that easily slides over obstacles
- Black powder coat finish is standard on steel skid plates for a rust resistant, durable and high quality finish, optional on aluminum
- Installs in minutes
- Grade 8 hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Made in the USA
(4 reviews) -
Skid PlatesFREE SHIPPING
within 48 US StatesRCI Lexus GX460 / 5th Gen 4Runner Engine Skid Plate w/KDSS
- Fits KDSS Model 5th Gen 4Runners 2010-2024 and all GX460 models. On GX460, the oil filter access will not be used
- Includes front skid plate ONLY
- Protects front two cross-members, low hanging front differential, oil pan, transmission, second and third cross-members, exhaust cross pipe, and transfer-case
- Excellent addition or replacement of weak, lightweight OEM skid plates
- Simple installation and removal of all subsections for maintenance
- Built in oil drain holes allow easy access and ability to change oil without removal of plate
- Engine skid plates come standard with center mounting posts for substantially increased strength
- Engine skid plate includes differential drop cage for maximum security and ground clearance, PLUS this feature allows the use of differential drop kits without having to space the skid plate down
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Smooth, flat surface that easily slides over obstacles
- Black powder coat finish is standard on steel skid plates for a rust resistant, durable and high quality finish, optional on aluminum
- Installs in minutes
- Grade 8 hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Made in the USA
(4 reviews) -
ARB
OMESB1 Leaf Spring Bushings (1 Per Leaf Spring Required)
- Brand: Old Man Emu
- Manufacturer’s Part Number: OMESB1
- Part Type: Leaf Spring Bushings
- Product Line: Old Man Emu Leaf Spring Bushings
- UPC: 881348005151
- Shackle Bushings Included: Yes
- Spring Pad Bushings Included: No
- Hardware Included: No
- Sleeve Included: No
- Bushing Material: Polyurethane
- Bushing Color: Yellow
- Quantity: Sold as a kit.
- Notes: Kit services one leaf spring.
(6 reviews) -
4Runner 3rd Gen (1996-2002)FREE SHIPPING
within 48 US StatesTimbren ABSTOR4R Active Off Road Rear Bump Stops | 1990-2002 4Runner
- Suits all 1990 to 2002 Toyota 4Runner, and also Suits Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation
- Satisfaction Guarantee
- Lifetime Warranty
- Click here for instructions
(14 reviews) -
Tundra 3rd Gen (2022-2025+)FREE SHIPPING
within 48 US StatesRCI Full Skid Package | Tundra 2022+ & Sequoia 2023+
- Suits Tundra 2022-2025+ 4×4 Models Only (not for 2WD), and 2023-2025+ Toyota Sequoia 4×4
- Choose from 10 gauge steel or 1/4″ 5052 Aluminum
- Includes front, transmission/transfer-case skid plates
- Please note that some images show our optional Cat Guards, which are NOT included with this item
- Protects power steering unit, front differential, front cross-member, engine, engine bay, and radiator
- Mounts to radiator cross-member without interfering with aftermarket bumpers, hidden winch, etc.
- Excellent replacement of weak, lightweight OEM skid plates
- Simple installation and removal of all subsections for maintenance
- Easy access to oil filter by removal of access door using only two bolts
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Smooth, flat surface that easily slides over obstacles
- Black powder coat standard on steel skid plates for a rust resistant, durable and high quality finish
- Installs in minutes
- Grade 8 hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Made to order
- Not compatible with 4″+ drop bracket lift kits (does work with all 1-3″ coilover lifts)
- Made in the USA.
(8 reviews) -
Full Suspension Kits - Tundra 1st GenFREE SHIPPING
within 48 US StatesDobinsons 2-2.5″ IMS Lift Kit Toyota Tundra 2000-2006
- For 2000-2006 Toyota Tundra 4×4 with V8 Engine
- Adjustable height front struts, lift from 2″ to 2.5″
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Includes 2 Front Struts, 2 Rear Shocks, 2 Front Coil Springs (a pair), and Multiple Rear Lift Options
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- It’s recommended that these coilovers to be run with a diff drop kit and aftermarket UCA’s for coilover clearance and correct travel
- See photo of the droop spacer, which should be used at 2″ or more of lift for adequate down travel
(13 reviews) -
Full Suspension Kits - 200 SeriesFREE SHIPPING
within 48 US StatesDobinsons 1-2.5″ 3-Way Adjustable MRA Coilovers for Toyota Land Cruiser 200 Series
- Suits Toyota Land Cruiser 200 Series and Lexus LX570 2008-2021 Models with 5.7L V8 Gas Engine
- Looking for a quick and easy way to lift your 200 Series? This is your answer
- Select your desired lift height and spring rate – we’ll take care of the rest!!
- Dobinsons MRA are height adjustable by a fully threaded body
- The Dobinsons MRA Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 22mm / 7/8″ shaft diameter
- MRA59-A688 Travel – 606mm extended, 438mm compressed
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 22mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- BANJO FITTING ON LOWER STRUT FACES INWARDS TOWARDS ENGINE ON BOTH SIDES
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
- Resi installation instructions
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle. Adding 2.5″ or more lift, new UCA’s should be added for proper articulation and correct wheel alignment
- Link to Matching rear shocks
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
(7 reviews) -
Full Suspension Kits - FJC EarlyFREE SHIPPING
within 48 US StatesDobinsons 1.5-3.5″ 3-Way Adjustable MRA FJ Cruiser Coilovers for 2006-2009
- Suits Toyota FJ Cruiser 2006-2009
- Looking for a quick and easy way to lift your FJ Cruiser? This is your answer
- Select your desired lift height and spring rate – we’ll take care of the rest!!
- Dobinsons MRA are height adjustable by a fully threaded body
- The Dobinsons MRA Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- Extended Travel – 567mm extended, 417mm compressed
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
- Resi installation instructions
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle. Adding 2.5″ or more lift, new UCA’s should be added for proper articulation and correct wheel alignment
- Link to Matching rear shocks
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
(8 reviews) -
4Runner 3rd Gen (1996-2002)
3rd Gen 4Runner Long Range Auxiliary Fuel Tank (29gal)
- Suits 3rd Gen Toyota 4Runner 1996 to 2002 with Gasoline Engines. Also fits the international Toyota Hilux Surf (petrol only)
- 1996-2000 — No mods beyond normal
- 2001-2002 — Will require relocation of the charcoal canister
- This is an additional tank that goes behind the rear axle, it holds 29 gallons, and uses a transfer pump to fill your main tank when you hit a switch
- 29 gallon capacity, fits in the void behind the rear axle and in front of the rear bumper, requires relocation of the stock spare tire
- 29 gallons plus your original 18.5 gallon tank gives you a capacity of 47.5 gallons in total!!
- Filling of this tank is done via a new twin filler neck that replaces the original filler
- Tank uses a transfer pump to fill the main tank, 2L per minute pump rate
- No Exhaust modification required
- Spare tire must be relocated
- Fitting time – approximately 5 hours
- This is a special order tank and takes 4-6 months to bring from Australia. Special orders cannot be cancelled or returned
- Intended to be installed by a certified mechanic
- This item ships on a pallet to the nearest Truck Freight terminal for you to pickup. We will be in touch with you regarding the nearest freight terminal, unless you add home delivery.
- This product can not be sold or shipped to residents in California. Do not order this product if you live in California!!
- Installation Instructions
- **This tank is only for gasoline or petrol models. Long Range makes a different tank for the diesel, but it’s not carried in the USA
- MADE IN AUSTRALIA
(5 reviews) -
80 Series Land Cruiser (1990-1997)FREE SHIPPING
within 48 US StatesDobinsons 3.5-4″ IMS Lift Kit Builder | Land Cruiser 80 Series
- Suits Land Cruiser 80 Series and Lexus LX450
- Complete IMS suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- **Kit photo shows with additional options purchased**
- Coils are specifically suited to match OE spec and height
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- IMS Shocks are Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
- Base Kit should include front and rear shocks and coils, 5 degree castor plate kit, Front and Rear adjustable panhard rods, front sway bar extensions and rear proportioning valve extension
- A double-cardan front drive shaft is required for any lift of 4″ or more on this vehicle – we don’t sell them
- You must choose what coils, shocks and other components you want to add
(12 reviews) -
Pickup (1988-1995)
Dobinsons HIL-034-R Medium Load Leaf Springs Pair for Toyota Pickup 1988-95
- Dobinsons HIL-034-R pair of leaf springs for the rear of the Toyota Pickups (USA models) from 1988 to 1995 and they give 45mm (1.75″) of lift
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Sold as a pair, springs only
- Order Suitable Bushing Kit and U-bolt Kit
(2 reviews) -
FJ/BJ70, BJ71, FJ/BJ73, FJ/BJ74
Dobinsons HJ75-8L-F Front Heavy Load Leaf Springs Pair
- Front Leaf Springs for the Toyota FJ/BJ70, BJ71, FJ/BJ73, FJ/BJ74 4×4 from 1985 to 1989 and 1990-1999 75 Series – FZJ75, HZJ75
- 45-50mm front lift with 110-220LBS of constant weight
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Sold as a pair
(2 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons GS59-633 Rear Twin Tube Long Travel Shocks Pair | 70 Series
- For 1/90 to 5/93 Toyota 70 Series models, LJ70 LJ72 LJ73 LJ77 with Square Headlights, and 1994+ RJ70, RJ73, KZJ70, KZJ71, KZJ73 with Square Headlights, and LJ78, LJ79, RJ77, KZJ78
- For 2.5″ of lift only
- Sold as a pair
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
(10 reviews) -
200 Series Land Cruiser (2008-2021)
Dobinsons C59-538 1.0″ Land Cruiser 200 Series Front Coils – Pair
- Dobinsons C59-538 1.0″ (25mm) Landcruiser 200 Series Front Coils
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Teal Finish.
- Sold as a Pair
(6 reviews) -
200 Series Land Cruiser (2008-2021)
Toyota Land Cruiser 200 Series 2008-2021 Long Range Auxiliary Fuel Tank (40gal)
- Suits Toyota Landcruiser 200 Series 2008-2021 with the gas engine, also suits the Lexus LX570 of the same years
- THIS IS A SPECIAL ORDER TANK, WOULD TAKE 4-6 MONTHS TO BRING FROM AUSTRALIA
- This is an additional tank that goes where the factory spare tire sat, it holds 40 gallons, and uses a transfer pump to fill your main tank when you hit a switch
- 40 gallon capacity, fits where OE spare tire sat (requires spare relocation)
- 40 gallons plus your original 25 gallon tank gives you a capacity of 65 gallons in total!!
- Tank fills using the OEM gas door and supplied parts
- Tank uses a transfer pump to fill the main tank, 2L per minute pump rate
- No Exhaust modification required
- Fitting time – approximately 5 hours
- Part Number TLC200RA-40G
- Fitting Instructions – Intended to be installed by a certified mechanic
- This item ships on a pallet to the nearest Truck Freight terminal for you to pickup. We will be in touch with you regarding the nearest freight terminal, unless you add home delivery
- This product can not be sold or shipped to residents in California. Do not order this product if you live in California!!
- MADE IN AUSTRALIA
(5 reviews) -
80 Series Land Cruiser (1990-1997)
ARB 3411050 Toyota 80 Series Landcruiser Front Winch Bumper
- Suits all Toyota Landcruiser 80 Series models from 1990 to 1997 and Lexus LX450
- Enhances the look of the 80 Series as well as providing awesome protection against animal strikes or rear end accidents
- Full width single piece steel welded bumper, includes all mounting hardware
- Compatible with a range of low mount winches without an integrated solenoid pack
- Includes driving light mounts as well as CB antenna mounts, welded in place
- Durable black powder coat finish
- Includes recessed turn signals in the bumper that you can wire into your OEM harness for additional visibility
- Not as heavy as it looks, just over 100lbs out of the packaging
- Ships by truck freight – we will be in touch with you about shipping details
- Fitment of Warn XD9000 & M8000 winch requires special spacer kit – ARB part no. 3500050.
- Best suited to a 10k or 12k low-mount winch, due to overall truck weight and size
- Shipping is calculated in the shopping cart and it ships to your house
(7 reviews) -
100 Series Land Cruiser IFS (1998-2007)
Toyota Land Cruiser 100 Series 1998-2005 Long Range Replacement Fuel Tank V8 (40gal)
- Suits Lexus LX470 and Toyota Land Cruiser 100 Series 1998-5/2005 IFS V8 Gas models
- This will only suit up to 5/2005 build date models due to changes in the vehicle after that. You must verify your build date prior to ordering
- For US-spec 100 series and LX470 with a single original tank (not dual tanks)
- Replacement tank – 40 gallon capacity replaces original 25 gallon tank
- Fills using OEM gas door
- No Exhaust modification required
- Fitting time – approximately 4 hours
- Part Number TLC100IFSEFR
- Fitting Instructions – Intended to be installed by a certified mechanic
- This item ships on a pallet to the nearest Truck Freight terminal for you to pickup. We will be in touch with you regarding the nearest freight terminal, unless you add home delivery.
- This product can not be sold or shipped to residents in California. Do not order this product if you live in California!!
- MADE IN AUSTRALIA
(5 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons 1.5″ to 3.5″ IMS Lift Kit | FJ Cruiser 2010-2017
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base Kit Includes 2 Front IMS Struts, 2 Rear IMS Shocks, and 4 Coil Springs
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 Year Replacement Warranty
- Front IMS height adjustment instructions
(13 reviews) -
Pickup (1988-1995)
Dobinsons Toyota Pickup Hilux 1.75″ Suspension Kit for 1988-1995 models
- Suits Toyota Pickup 1988-1995 USA models and 1991-2005 Toyota Hilux LN107 SR5, LN108, RN106
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Front torsion bars are optional, you can add new ones if you don’t want to use your originals
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Includes torsion bars, front and rear shocks, steering damper, shackles, pins, u-bolts, leaf springs and bushings
- Choose which specific parts you’d like from the menu below
(13 reviews) -
80 Series Land Cruiser (1990-1997)FREE SHIPPING
within 48 US StatesDobinsons 6″ Lift Kit Builder | Toyota Land Cruiser 80 Series (inc All Shock Options)
- Suits Land Cruiser 80 Series and Lexus LX450
- Kit requires additional parts for this lift height, see below
- **Kit photo shows with every additional option purchased**
- Coils are specifically suited to match lift height and added weight
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- Select Dobinsons Twin Tube, IMS or 3-way Adjustable MRA shocks from the list
- 3-way Adjustable MRA shocks you can adjust high and low speed compression (HSC and LSC) and rebound adjustment front and rear
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Kit includes front and rear shocks and coils, steering damper, 5 degree castor kit, Front and Rear adjustable panhard rods for left hand drive, front sway bar extensions and rear proportioning valve extension – whatever you add to your cart. Nothing is included if you don’t select it
- Be sure to read each sub section clearly so you know what all is required to add this much lift to your vehicle.
- A double-cardan front drive shaft is required for any lift of 4″ or more on this vehicle – we don’t sell them
(13 reviews) -
4Runner 1st Gen (9/1985-1989)
Dobinsons Rear Leaf Springs Pair for Toyota 4Runner 1984 to 1989
- Suits 1984-1989 Toyota 4Runner with rear leaf springs
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
(4 reviews)
