Your cart is currently empty!
Tundra
Showing 91–120 of 203 resultsSorted by popularity
-
Tundra 2nd Gen (2007-2021)RCI Engine Skid Plate | 07-21 Tundra & 08-22 Sequoia
- Suits 2nd Gen Tundra (2007-2021) and Sequoia (2008-2022)
- Includes front engine skid plate only
- Protects power steering unit, front differential, front cross-member, engine, engine bay, and radiator
- Mounts to radiator cross-member without interfering with aftermarket bumpers, hidden winch, etc.
- Excellent replacement of weak, lightweight OEM skid plates
- Simple installation and removal of all subsections for maintenance
- Easy access to oil filter by removal of access door using only two bolts
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Smooth, flat surface that easily slides over obstacles
- Black powder coat standard on steel skid plates for a rust resistant, durable and high quality finish
- Installs in minutes
- Grade 8 hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Made in the USA.
(6 reviews) -
Dobinsons2-2.5″ Lift Kit Builder for Toyota Tundra 2000-2006
- Now you can build your own suspension kit with everything from Exit Offroad
- This page is for the 2000 to 2006 Toyota Tundra 4×4 with V8 Engine
- Use adjustable height IMS struts to go from 2″ to 2.5″ of front lift
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Choose what you’d like to add and build the price auto-adjusts
- You can add or remove whichever items you would like
- It’s recommended that the IMS and MRA coilovers to be run with a diff drop kit and aftermarket UCA’s for coilover clearance and correct travel
(7 reviews) -
Bump Stops & Spacers
Wheeler’s Rear Superbumps for Tundra & Canyon/Colorado
- Suits 2007 to 2021 Toyota Tundra and 2015-2022 Chevy Colorado and GMC Canyon Rear Ends
- Bolts in easily and quickly to replace the firm factory bump stops
- Includes necessary bump stops (2), goes under the factory u-bolts
- Made of a super durable micro-cellular polyurethane formula
- Provides controlled, progressive and comfortable bottoming response from your front suspension
- Installation Instructions
(7 reviews) -
Upper Control ArmsFREE SHIPPING
within 48 US StatesDobinsons Billet Aluminum UCA’s Pair | 07-21 Tundra and 08-22 Sequoia
- Super strong billet aluminum front upper control arms (UCA’s)
- Suits 2007-2021 Toyota Tundra and 2008-2022 Toyota Sequoia
- Complete kit for both left and right hand side
- OE-style sealed ball joints for a maintenance free life
- OE-style high quality rubber bushings for maximum NVH dampening and longevity
- No greasing or maintenance required at all, completely noise-free operation
- Adjustable on-vehicle for quick and easy alignment.
- Adjustable Camber and Caster for perfecting the vehicle’s handling
- O-ring sealed ball joint cap for protection against the elements
- Works for any lift height of 1.5″ or more
- *Must reuse OEM Washers
- Installation Instructions
- We recommend visiting an offroad specific shop for alignment, a regular alignment shop may not be able to adjust and align properly due to the added adjustability these arms offer
- Photos for illustration purposes
(12 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons MRA59-A711 3-Way Adjustable MRA Rear Shocks Pair | Tundra 2007-2021
- 3-way adjustable valving – Adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
(16 reviews) -
Tundra 3rd Gen (2022-2024)
Dobinsons 2.0″ Lift Rear Coil Springs for Toyota Tundra 2022+ – Pair
- Suits Toyota Tundra 2022+, lifts the rear 2.0″ with stock weight (no accessories)
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- Installation Note: Transfer over the OEM coil isolators from the stock coils to these to prevent coil slap
- Will not work with stock shocks, they’re not long enough. Click here to see shock options
- Stock base model shocks are ok with 1″ lift but they’re not very long. TRD Pro rear shocks are ok for up to 2″ of lift
(8 reviews) -
Bump Stops & Spacers
Wheeler’s Rear Superbumps for 95-23 Tacoma and 99-06 Tundra
- Suits the following vehicles: 1995-2023 Tacoma and 1999-2006 Toyota Tundra
- Bolts in easily and quickly to replace the firm factory bump stops
- Includes necessary bump stops (2), goes under the factory u-bolts
- Made of a super durable micro-cellular polyurethane formula
- Provides controlled, progressive and comfortable bottoming response from your front suspension
- Installation Instructions
(9 reviews) -
Tundra 2nd Gen (2007-2021)FREE SHIPPING
within 48 US StatesDirt King Toyota Tundra Boxed UCA Pair with Uniballs – Tundra + Sequoia
- Suits 2007-2021 Toyota Tundra 2WD / 4WD and 2008-2022 Toyota Sequoia 2WD / 4WD
- Proudly made in the USA
- CAD designed, Boxed plate construction, Professionally MIG welded
- 4130 chromoly uniball cups, 1” FK uniballs, 17-4 stainless steel misalignment spacers
- Military grade F911 hardware, Brushed stainless steel logo plates
- Preassembled for fast installation
- Grease fitting ports for easy servicing of bushings
- Zinc plated components for corrosion resistance
(4 reviews) -
Struts + Shocks - Tundra 2022+FREE SHIPPING
within 48 US StatesDobinsons 2.0-3.0″ 3-Way Adjustable MRA Coilovers for Toyota Tundra 2022+
- Suits Toyota Tundra 2022-2024+ Models
- TRD Pro Models yield 1″ less lift than listed here, as they are already lifted taller than base models
- Hybrid Models lift 1-1.5″ less lift than listed here
- Sold as a Pair, ready to bolt in
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- Looking for a quick and easy way to lift your Tundra? This is your answer
- Select your desired lift height and tell us your weight – we’ll take care of the rest!!
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- SOLD IN PAIRS
- Full 2 year limited warranty, no set rebuild time period
- Must mount the banjo fitting and hose inwards on MRA struts
- Coil seat for MRA59-A446 will be set at 175mm (6.87″) from the strut bushing eye
- Photos for illustration purposes
- Instructions for setting and adjusting coil seat height
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle. Adding 2.5″ or more lift, new UCA’s should be added for proper articulation and correct wheel alignment
- If doing a 2.5″ lift or higher in the front, a diff-drop kit or longer TRD CV-axles are REQUIRED, failure to complete these requirements could cause OE CV-axle failure
- TRD axle shafts: PT362-3432B and PT362-3431B
- Standard Coil seat height for MRA59-A446 is set at 175mm (6.87″) from the strut bushing eye to top of coil isolator
- Installation Instructions
- Link to Matching rear shocks
- A Diff Drop Kit needs to be run at 3″ of lift
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
(7 reviews) -
Struts + Shocks - Tundra 2nd Gen
Bilstein 24-286244 – 5100 Series Rear Shock 0-2″ lift – Tundra
- Suits 2007-2021 Toyota Tundra 4×4 Trucks – Rear
- Suits 0-2″ of lift
- Type: Nitrogen Gas Charged
- With Coil Spring: No
- Internal Design: Monotube
- Adjustable Valving: No
- Extended Length (IN): 26.81 Inch
- Compressed Length (IN): 17.34 Inch
- Upper Mounting Style: Stud
- Lower Mounting Style: Eyelet
- Body Color: Silver
- Quantity: Single
- With Reservoir: No
- Includes Dust Shield: No
- Includes Hardware: No
- Includes Boot: Yes
- Estimated Install Time (Hours): 0.5
- Sold individually
(7 reviews) -
Tacoma 1st Gen (1996-2004)FREE SHIPPING
within 48 US StatesDobinsons 2-2.5″ 3-Way Adjustable MRA Tacoma Coilovers for 1998-2004
- Suits 1998-2004 Toyota Tacoma 4×4 Models
- Looking for a quick and easy way to lift your Tacoma? This is your answer
- Extended Travel MRA59-A222 Coilovers – 458mm extended, 335mm compressed lengths
- Dobinsons MRA are height adjustable by a fully threaded body
- The Dobinsons MRA Coilovers will come pre-assembled with new struts, coils and top mounts
- Fully rebuildable and re-valvable
- SOLD IN PAIRS – READY TO BOLT IN
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Includes Universal Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Photos for illustration purposes
- Instructions for setting coil seat height
- It’s recommended that these coilovers to be run with a diff drop kit and aftermarket UCA’s for coilover clearance and correct travel
- Link to Matching rear shocks
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
(2 reviews) -
Performance Upgrades - Tundra 2nd GenFREE SHIPPING
within 48 US StatesPowerbrake D-Line HP Rotor and Pad Kit | Tundra 07-21 Rear
- Suits Toyota Tundra 2007-2021 Rear
- Also offered for the FRONT
- Powerbrake D-Line Features
- Rotors are cast from a proprietary high carbon cast-iron alloy.
- Rotors are machined to tolerances up to three times tighter than the industry norm.
- All Powerbrake rotors feature our MTR (Max Temperature Recording) system.
- Proprietary black disc surface coating ensures quicker bed-in and max brake performance.
- Spiral slots on the rotor fiction surface clear friction gasses, debris and water.
- Matched high friction PB05 brake pads take the guesswork out of pad selection.
- Pad compound PB05 is manufactured in Japan and has been specifically formulated for use on 4×4 vehicles
- Powerbrake D-Line Benefits at a Glance
- Reduced stopping distances in both wet and dry conditions.
- Reduced brake fade and improved brake consistency.
- Improved initial brake response (bite).
- Improved brake modulation particularly during emergency stops.
- Improved resistance to rotor distortion (warping) and cracking at high temperatures.
- What’s Included in Powerbrake D-Line?
- 2 x Standard OEM diameter high performance slotted rotors for your 4WD or truck – Made in South Africa.
- An axle set of matched PB05 high-performance brake pads – Made in Japan.
- Fits as per a standard rotor and pad change, using the vehicle’s original calipers.
(3 reviews) -
Tundra 3rd Gen (2022-2024)
Dobinsons Adjustable Rear Lower Control Arms Pair for Tundra + Tacoma
- Suits all 2022+ Toyota Tundra and 2024+ Toyota Tacoma
- Comes with high quality rubber OE style bushings installed for maximum flexibility, and zero noise
- Made from HSLA (High Strength Low Alloy) Steel
- 40mm OD and 6mm wall thickness with support brace
- Oversized adjusters and rod thickness for maximum strength and durability with double-nut locking feature
- Zinc plated, then E-coated black, for the ultimate finish and protection
- Sold as a pair
(4 reviews) -
Tundra 3rd Gen (2022-2024)
Dobinsons C59-836 Front Springs | Toyota Tundra 2022+ Sequoia 2023+ (110-220LBS) – Pair
- Suits Toyota Tundra 2022+ and Sequoia 2023+
- Lifts the front Tundra 2.0″ and Sequoia 3.0″ with 110-220LBS of constant weight
- Fully Designed, Manufactured, and Finished In Australia
- These will NOT suit a TRD PRO
- Hybrid Models lift 1-1.5″ less lift than listed here
- TRD Pro came with 1″ of lift, so subtract that if you’re changing to a full Dobinsons kit
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(14 reviews)$305.00 Select options This product has multiple variants. The options may be chosen on the product page -
All Pro OffroadFREE SHIPPING
within 48 US StatesToyota Tundra Overland Tailgate Table (2022+)
- The stock tailgate panel is a wasted opportunity that you can easily correct with the All-Pro Off-Road Overland Tailgate Table.
- The All-Pro Off-Road Overland Tailgate Table turns your opened tailgate into a multi-functional platform for all of your overlanding, camping, fishing, and hunting needs.
- The durable food-grade polyethylene cover can be used as a cutting board while supporting your favorite camp stove.
- A slot on the left side and cup-holders on the right side prevent items from rolling away.
- Requiring only basic hand tools, reusing original hardware, and 3-minutes of time, this is one of the easiest modifications you will ever make on your truck and one every Tundra owner should do.
- Features a ruler in 1-inch (imperial) increments along the edge of the table adding convenience when measuring fish, rope, etc.
- Made in 2 different styles, choose from the divided cutting board configuration, or the smooth configuration with only round cutouts on the end.
- Thickness is right at 1/2″
- Scroll down on the page to see a full product video!!
- Made in the USA, in sunny California!!
(6 reviews) -
Tundra 3rd Gen (2022-2024)
RCI Full Skid Package | Tundra 2022+ & Sequoia 2023+
- Suits Tundra 2022-2024+ 4×4 Models Only (not for 2WD), and 2023-2024+ Toyota Sequoia 4×4
- Choose from 10 gauge steel or 1/4″ 5052 Aluminum
- Includes front, transmission/transfer-case skid plates
- Please note that some images show our optional Cat Guards, which are NOT included with this item
- Protects power steering unit, front differential, front cross-member, engine, engine bay, and radiator
- Mounts to radiator cross-member without interfering with aftermarket bumpers, hidden winch, etc.
- Excellent replacement of weak, lightweight OEM skid plates
- Simple installation and removal of all subsections for maintenance
- Easy access to oil filter by removal of access door using only two bolts
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Smooth, flat surface that easily slides over obstacles
- Black powder coat standard on steel skid plates for a rust resistant, durable and high quality finish
- Installs in minutes
- Grade 8 hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Made to order
- Not compatible with 4″+ drop bracket lift kits (does work with all 1-3″ coilover lifts)
- Made in the USA.
(8 reviews) -
Full Suspension Kits - Tundra 1st GenFREE SHIPPING
within 48 US StatesDobinsons 2-2.5″ IMS Lift Kit Toyota Tundra 2000-2006
- For 2000-2006 Toyota Tundra 4×4 with V8 Engine
- Adjustable height front struts, lift from 2″ to 2.5″
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Includes 2 Front Struts, 2 Rear Shocks, 2 Front Coil Springs (a pair), and Multiple Rear Lift Options
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- It’s recommended that these coilovers to be run with a diff drop kit and aftermarket UCA’s for coilover clearance and correct travel
- See photo of the droop spacer, which should be used at 2″ or more of lift for adequate down travel
(13 reviews) -
Tundra 2nd Gen (2007-2021)
Toyota Tundra Long Range Replacement Fuel Tank 2007-2021 (46gal)
- Suits Toyota Tundra 2007-2021 Short and Long Bed models, dual cab and crew max
- This is a replacement tank that replaces your OE fuel tank, it holds 46 gallons instead of the stock 26 gallons and fills the same way an OE tank fills
- 46 gallon capacity, replaces the original tank (both OE sizes)
- Can replace the bigger OEM tank, but an additional part needs to be removed from the frame for the tank to fit properly (not hard)
- Tank fills using OEM gas door
- No Exhaust modification required
- Fitting time – approximately 4 hours
- Part Number TTUNDRADCR
- Intended to be installed by a certified mechanic
- Installation Instructions
- This item ships on a pallet to the nearest Truck Freight terminal for you to pickup. We will be in touch with you regarding the nearest freight terminal, unless you add home delivery.
- This product can not be sold or shipped to residents in California. Do not order this product if you live in California!!
- MADE IN AUSTRALIA
(5 reviews) -
Sale!Control Arms - Tundra 2022+FREE SHIPPING
within 48 US StatesPro Series Front Upper Control Arms for 22-24 Tundra + 23-24 Sequoia
- Suits 2022-2024+ Tundra and 2023-2024+ Sequoia 4×4 Models with 1.75+ of lift over a base model
- Pro Series heavy-duty ball joint allows for increased strength and angle for greater wheel travel for lifted applications without sacrificing ride quality
- Billet o-ring dust cap and sealed ball joint assembly protects the ball joint assembly from corrosion, dirt and debris in harsh off-road conditions
- Gusseted pivot and ball joint housings are designed for maximum clearance and engineered for maximum strength for lifted applications
- Helix grooved multi-rate bushing assembly using PTMEG urethane preserves lubrication and protects from debris for less maintenance with PTMEG cross linked urethane providing more durability over standard bushings
- Super durable polyester black powder coat long lasting finish that maintains a premium look and protects from humidity and corrosion
- Actual product may differ from images
- Toyota recommends TRD axle shafts: PT362-3432B and PT362-3431B for any 2022 4WD Tundra lifter over stock height
- These are on Clearance, all sales are FINAL
(13 reviews) -
Upper Control ArmsFREE SHIPPING
within 48 US StatesIcon Billet UCA DJ Pro Pair for 22-24 Tundra + 23-24 Sequoia
- Suits 2022-2024+ Tundra and 2023-2024+ Sequoia 4×4 Models with 1.75+ of lift over a base model
- CNC machined 6061 billet aluminum construction with satin anodized finish
- Corrects suspension geometry and allows for proper wheel alignment on Tundras and Sequoias with up to 3.5” of lift
- Quick, precise, on-vehicle adjustment for both caster and camber
- Delta Joint PRO allows maximum articulation without binding
- Delta Joint PRO is 100% serviceable and rebuildable
- FK Rod Ends at chassis pivots for strength and precision driving characteristics
- Built in O-ring sealed dust cover cap
- Installation Guide
- Warranty Info
(7 reviews) -
DobinsonsFREE SHIPPING
within 48 US StatesDobinsons IMS59-50229 Monotube 2.2″ IFP Rear Shocks Pair
- Suits the rear of Toyota Hilux Revo 2016+ and Toyota Tacoma 1998-2004 (for long travel)
- For the Tacoma, these are considered long travel shocks for maximum droop. Additional parts may be required to get that travel out of the truck, such as bump stop extensions, longer brake lines, etc
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Dobinsons IMS59-50229 Specifications: 650mm extended, 416mm compressed, 56mm body size
(11 reviews) -
Roof Racks
RCI 12″ HD Low Profile Truck Bed Rack
- For Short Bed Trucks from 46-58″ in Bed Length
- For Trucks Such As: Jeep Gladiator, Toyota Tacoma, Nissan Frontier, Ford Ranger, Chevy Colorado, GMC Canyon, Ford F150, Toyota Tundra, etc
- Rack is 12″ tall from bed rail to top of rack
- Mount anything from lights, Hi-lift, co2, fire extinguisher, quick-fist, roto-pax, spare tire, roof top tent, etc
- This is our HD model, utilizing three cross-members spanning the truck bed, this rack is has the highest weight capacity and provides even weight distribution on the trucks bed side rails
- Built in mounting points allow unlimited options for adding accessories
- Bolts to inside of bed rails or can alternatively be mounted with optional “drill-free” clamps to mount like a truck topper (Not applicable when bolting to accessory rail systems)
- Rack is 12″ tall from bed rail to top of rack
- Adjustable width adapts to any truck bed from 54″ – 64″ width between the bed rails
- Three length options to fit any application from 5′ beds to 6’+
- Maintains very good visibility through the back window despite the low overall rack height
- Using this rack will minimize the aerodynamic drag normally associated with roof top tents by keeping it largely below the roof-line
- Slotted mounting points on top of rack accept nearly any roof top tent making mounting a breeze
- Includes TWO top braces, for unlimited accessory and tent mounting options
- Heavy duty black textured powder coat finish comes standard, plus we take it a step further and coat all racks with an epoxy primer. This extra step is expensive and time consuming but ensures our paint job will outlast anything else in the industry!
- Easy bolt together assembly, takes about 45 minutes to install with only a few basic hand tools
- All hardware for installation is included
- Weights
- 5ft (46″) 86lbs
- 5ft6in(52″) 92lbs
- 6ft(58″) 96lbs
- Adjustable Bedrack Install Guide
- Made in Loveland, Colorado USA
(2 reviews) -
Tundra 3rd Gen (2022-2024)FREE SHIPPING
within 48 US StatesDobinsons MRA59-A887 2.6″ 3-Way Adjustable Rear Shocks Pair
- Suits 2022+ Toyota Tundra Rear with 1.0-3.0″ of Lift
- These shock run softer internal valving than the MRA59-A687 (which are better suited to heavy loads)
- 3-way adjustable valving – Adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 22mm / 7/8″ shaft diameter
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Piggyback Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- 674mm extended, 420mm compressed
- Installation Instructions of the MRA Shocks
(15 reviews) -
Bump Stops - Tundra 2022+FREE SHIPPING
within 48 US StatesTimbren Bump Stops Front & Rear | Tundra Sequoia LC250
- Suits the 2022-2024+ Toyota Tundra, 2023-2024+ Sequoia, 2024+ Land Cruiser 250
- Includes both Front and Rear bump stops for the whole vehicle
- Active Off-Road Bump stops provide off-road enthusiasts greater control over their vehicles’ suspension travel. Using progressive-rate springs means that instead of a hard stop at the end of axle travel the axle energy will be absorbed when bottoming-out producing smooth, predictable, and quiet axle engagement and disengagement.
- Unlike OEM bump stops, Active Off-Road Bumpstops are made from natural rubber. Just like our Timbren SES line, Active Off-Road Bumpstops carry a lifetime warranty and a satisfaction guarantee.
- ABSTORTNDR replaces the rear OEM bump stops and ABSTOF replaces the fronts
- Upgrade to Active Off-road Bump stops and experience the difference
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation
- Satisfaction Guarantee
- Lifetime Warranty
- Front Instructions and Rear Instructions
(12 reviews) -
Tundra 3rd Gen (2022-2024)
Dobinsons Front Coil Spring Options | Toyota Tundra 2022+ – Pair
- Suits Toyota Tundra 2022-2024+, choose the appropriate lift height that also matches any added weight you’ve put on the truck
- Intended to be run with Dobinsons front struts
- Hybrid Models lift 1-1.5″ less lift than listed here
- These will NOT suit a TRD PRO Strut, they’re a different size
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(12 reviews) -
Tundra 3rd Gen (2022-2024)
Dobinsons C59-840 Front Springs | Toyota Tundra 2022+ Sequoia 2023+ (110-220LBS) – Pair
- Suits Toyota Tundra 2022+ and Sequoia 2023+
- Lifts the Tundra 3.0″ and Sequoia 4.0″ with 110-220LBS of constant weight
- Fully Designed, Manufactured, and Finished In Australia
- These will NOT suit a TRD PRO strut
- Hybrid Models lift 1-1.5″ less lift than listed here
- TRD Pro models came with 1″ lift from the factory, so deduct that if you’re switching to a full Dobinsons kit
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(13 reviews)$305.00 Select options This product has multiple variants. The options may be chosen on the product page -
BrakesFREE SHIPPING
within 48 US StatesPowerbrake X-Line 4×4 Toyota Tundra Big Brake Kit for 2000-2006
2000-2006 Toyota Tundra Big Brake Kit Includes:
- X-Line billet 6-piston off-road calipers (pair)
- High-performance brake pads, pre-loaded into the calipers
- 1-Piece 350mm x 34mm (13.77″ x 1.33″) 48-vane discs
- Curved, directional cooling vanes
- Billet caliper mounting brackets
- Stainless steel braided brake lines
- All necessary mounting hardware for quick, easy bolt-on installation
- Comprehensive fitment and bed-in instructions
- For 6-Lug models only (Pre-Runner and 4×4 models)
- Now Includes Upgraded Powerbrake Pads, PB05 Compound – highest level 4×4 brake pads available – made in Japan
- Manufactured, finished and packaged 100% in South Africa
- REQUIRES 17″ WHEELS FOR ADEQUATE CALIPER CLEARANCE
(4 reviews)$2,675.00 Select options This product has multiple variants. The options may be chosen on the product page -
Tundra 3rd Gen (2022-2024)
Dobinsons Twin Tube Rear Shocks Pair | Toyota Tundra 2022+
- Suits the rear of a 2022+ Toyota Tundra with 2-2.5″ of Lift
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings
- Double Chrome hardened rods
- Metal shock boot to protect rod from damage
- Sold in Pairs
(8 reviews) -
Dobinsons
Dobinsons DD59-542K Front Diff Drop Kit | Tundra Sequoia
- Suits 2022+ Toyota Tundra, 2023+ Toyota Sequoia
- Keeps CV angles at a good working angle when lifted
- Suitable for lifts over 2.0″
- Includes all necessary hardware
- Compliments Dobinsons 2″+ lifts for IFS Toyota vehicles
- Installation Guide
(0 reviews)
