Continue shopping “Dobinsons WA59-522K Adjustable Rear Upper Trailing Arms Pair | 4Runner FJ Cruiser GX470 GX460” has been added to your cart.
You may be interested in…
-
Air CompressorsARB CKMTA12 12V High Performance Twin Air Compressor
- Motors are water sealed, 100% ball bearing equipped (i.e. no bushings), and feature a unique linear brush pre-load system for extra long life, low heat and quiet operation throughout the life of the unit.
- Compact twin motor, dual cylinder design makes it the highest flowing compressor in its class (voltage vs. size). Highest air flow rate of any 12V compressor of its size on the market at 174LPM [6.16CFM].
- Full wiring loom included for simplified installation and easy plug-in connectivity to Air Locker control solenoids. (Note: Air Locker Manifold Kit #171503 required to mount solenoids).
- Motors are internally thermal protected against extreme temperature damage. Over-pressure safety valve equipped. Equipped with dual heavy duty Maxi-Fuses for professional in-line circuit protection and true circuit redundancy in case of a fault.
- Compressor pistons are equipped with a heavy duty European made cylindrical roller bearing. Hard-anodized cylinder bores and PTFE (Teflon) impregnated carbon fibre piston seals for reduced friction and maximum trouble free life.
- 12V, Draws 50 Amps max, 6.16 CFM, 150 PSI max, 100% Duty Cycle
- 10.9 x 7.5 x 4.1 inches actual dimensions, 19.4 LBS with all items included
$616.00 Add to cart -
Front Bumpers
WARN 101330 Elite Series Stubby Front Winch Bumper for JL & JT
- Suits Jeep Wrangler JL 2018-2023 (all models) and Jeep Gladiator JT 2020-2023 (all models)
- This is a winch bumper – it’s highly recommended to only buy it if you plan to put a winch in, otherwise it will look unfinished from up top since there is no cover panel if no winch is installed
- Photos are shown with all added accessories. This is for the base bumper only, no winch or under protection plates are included
- Certified To Withstand An Industry-Leading 12,000 Pounds Of Pulling Force, Without Deformation
- Durable Flat Black Power-Coated Finish With Five-Stage Pretreat Process And Zirconium Nanotechnology, Engineered To Withstand 408 Hours Of Salt Spray Testing
- Winch Positioned To Deliver Maximum Airflow To The Engine Bay
- Stubby Version Allows For Mounting Of Driving Lights Above The Bumper
- Integrated Off-Road Jack Lifting Points And Shackle-Mounting Tabs
- Limited 1 Year Warranty
- Type: 1-Piece
- Tubular: No
- Air Bag Compatible: No
- Finish: Powder Coated
- Color: Black
- Material: Steel
- Drilling Required: No
- Hitch Type: Without Receiver
- Maximum Gross Trailer Weight: Without Receiver
- Maximum Tongue Weight: Without Receiver
- With Grille Guard: No
- With Grille Screen: No
- With Bull Bar: Yes
- With Winch Mount: Yes
- Winch Compatible: Yes
- Tow Hooks: With Tow Hook Mounts
- D-Rings: With D-Rings
- With Light Cutouts: No
- Light Type: No Lights
- With Mounting Hardware: Yes
- With Skid Plate: No
- With Spare Tire Mount: No
- With License Plate Mount: Yes
- With Jacking Points: No
- With CB Antenna Mount: No
- Estimated Install Time (Hours): 2
- Installation Instructions
- Optional Front Skid Plate Can Be Added
$999.99 Add to cart -
Sale!ExceptionsShips FREE !!
within 48 US StatesWarn 106690 Jack Hammer Wheel – 17×8.5″ 5×5″ 0 Offset – Gun Metal
- Warn wheels made specifically for Jeep Wrangler JL, JK, and Gladiator JT.
- 17×8.5″ wheel with 0 Offset, 4.75″ backspacing, 5 lugs, Uses OEM Jeep lug nuts
- Sold Individually
- Gun Metal Finish
- 1 Piece Cast Aluminum Construction
- Compatible With TPMS (Tire Pressure Monitoring System)
- With Warn Logo Center Cap
- Limited Lifetime Structural Warranty
- When Installing On A 2020+ Jeep Wrangler The OEM TPMS Sensor Can Be Used But Must Be Turned In The “UP” Position And It Will Not Lay Flat Against The Wheel
- Bolt Pattern Inch: 5×5.00
- Bolt Pattern Millimeter: Not Applicable
- Diameter: 17
- Width: 8.5
- Offset: 0
- Backspacing: 4.75
- Material: Aluminum
- Finish: Painted
- Color: Gun Metal
- Bolt Pattern Inch: 5×5.00
- Bolt Pattern Inch: Not Applicable
- Bolt Pattern Millimeter: 5×127
- Bolt Pattern Millimeter: Not Applicable
- Lug Nut Seat Type: 60 Degree Conical
- Center Cap: See Replacement Items
- Center Bore: 71.50
- Lug Nut Design: Acorn
- Compatible With TPMS (Tire Pressure Monitoring Sys: Yes
- Basic Design: Solid Center
- With Inserts: No
- Load Capacity: 2100
- Size: 17×8.5
- Max Tire Diameter: 40
- Center Cap Design: Warn Logo
- Structural Warranty: Lifetime
- Quantity: Single
- Construction: One Piece Cast
- With Hub Centric Ring: No
- Estimated Install Time (Hours): 0.5
- Prop 65 WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- This item is not returnable – any product damage must be reported to the shipping carrier within 48 hours of receipt.
Original price was: $352.93.$299.99Current price is: $299.99. Add to cart -
Bronco 2021-2024+
Dobinsons Adjustable Rear Upper Control Arms | Bronco 2021+
- Suits all 2021+ Ford Bronco (fullsize)
- Comes with high quality rubber OE style bushings installed for maximum flexibility, and zero noise
- Made from HSLA (High Strength Low Alloy) Steel
- 40mm OD and 6mm wall thickness with support brace
- Oversized adjusters and rod thickness for maximum strength and durability with double-nut locking feature
- Zinc plated, then E-coated black, for the ultimate finish and protection
- Sold as a pair
- Photos for illustration purposes
$330.00 Read more -
All Pro OffroadShips FREE !!
within 48 US StatesAll Pro Tacoma IFS Skid Plate – Aluminum Black
- Suits 2005-2023 Toyota Tacoma 4×4 Models
- Covers from the front bumper down to the first cross member
- 1/4-inch aluminum construction – Black Powder Coated Steel
- Optimal balance between strength and weight
- Save yourself from costly underbody repairs with this easy to install Tacoma skid plate
- Easy, bolt-on installation using all factory hardware
- Compatible with stock bumpers
- Available in 4 variants – Steel or Aluminum, Bare or Powder Coated
- Installation Instructions
$440.00 Add to cart -
All Pro OffroadShips FREE !!
within 48 US StatesAll Pro Tacoma IFS Skid Plate – Raw Aluminum
- Suits 2005-2023 Toyota Tacoma 4×4 Models
- Covers from the front bumper down to the first cross member
- 1/4-inch aluminum construction – Raw aluminum
- Optimal balance between strength and weight
- Save yourself from costly underbody repairs with this easy to install Tacoma skid plate
- Easy, bolt-on installation using all factory hardware
- Compatible with stock bumpers
- Available in 4 variants – Steel or Aluminum, Bare or Powder Coated
- Installation Instructions
$380.00 Add to cart -
Tundra 2nd Gen (2007-2021)Ships FREE !!
within 48 US StatesDirt King Performance Tundra Lower Control Arms – Tundra + Sequoia
- Suits 2007-2021 Toyota Tundra 2WD / 4WD and 2008-2022 Toyota Sequoia 2WD / 4WD
- CAD designed
- Formed steel bushing gussets
- Internally ribbed with extrusions for weight reduction
- Preassembled for fast installation
- Grease fitting ports for easy servicing
- Zinc plated components for corrosion resistance
- Bump stop plating
- Limit strap tabbing
- Bypass shock tabbing
- Professionally MIG welded
- Proudly made in the USA
$2,199.00 Add to cart -
TimbrenShips FREE !!
within 48 US StatesTimbren ABSTORSEQ Active Off Road Rear Bump Stops | Toyota and Lexus SUV’s
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation
- Satisfaction Guarantee
- Lifetime Warranty
- Suits 4th and 5th Gen 4Runner (2003-2024), FJ Cruiser, Lexus GX470 and GX460, Landcruiser 100 Series
-
Specs:
- 2,000 lb capacity
- 4,800 lb bump load capacity
- Overall kit height = 5”
- Total deflected (compressed) height = 2.75”
- Amount of deflection (compression) = 2.25”
- Click here for instructions
- Installation video from Exit Offroad
- Depending on the overall travel of the suspension you’re running, bump stop extensions may be necessary to prevent shock bottom-outs. Timbren make 2 options, they do not include any longer bolts which may be required
- A25722-90F00 (1/2″ spacer)
- A25723-90AD00 (1″ spacer)
$269.36 Add to cart -
Sale!AwningsShips FREE !!
within 48 US StatesHD Nomadic Car-Side Shower Room
- Use this for a shower, use it for changing clothes, a quick change room, use it for a portable toilet enclosure, or whatever else you can think of!!
- Hide inside it and scare the crap out of your camping buddies when you’re out in the middle of nowhere!!
- Manufactured from a high performance 420D Oxford Rip Stop fabric and aluminum folding arms enclosed in rugged 1000D waterproof PVC integrated storage bag
- Mounts to roof rack with supplied L brackets and mounting stainless steel hardware
- This does NOT have a roof/ceiling, it is open at the top
- Quick and easy setup, simply unzip, fold out and stake down
- Curtain hems weighted with structural poles to keep shape – 42 Inch (L) X 42 Inch (W) X 76 Inch (H) with adjustable straps to accommodate various vehicle heights
- The front curtain wall features a heavy duty dual sided zip which allows easy access in and out of the Nomadic Car Side Shower
- Velcro strap to secure a shower head and two (2) internal pouches
- Download Instructions
Original price was: $249.99.$174.99Current price is: $174.99. Add to cart -
Tundra 2nd Gen (2007-2021)Ships FREE !!
within 48 US StatesDobinsons MRA59-A710 3-Way Adjustable MRA Front Struts | Tundra 2007-2021
- Pair of Struts only, no coils included and not preassembled
- If you’re looking for an assembled set of coilovers, those are here: Assembled Coilovers for 2007-2021 Tundra
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Requires lower mount clearancing to fit the larger lower leg of the new coilover (see attached photo)
- See attached photo for correct hose routing, can vary depending on UCA’s used
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- SOLD IN PAIRS
- Full 2 year limited warranty, no set rebuild time period
- Does not include coil springs – sold separately
- Front coilover assembly instructions
- New UCA’s are required for proper coilover and hose clearance, see all options
- Aftermarket wheels with +18 Offset or less REQUIRED to avoid reservoir + hose rubbing at full lock
- Link to recommended 16″ coils with a 3″ inner diameter and 650LB Spring Rate
- Link to add assembly labor charge, so that when you buy these struts and the coils, you can have them preassembled before shipping
$1,790.00 Add to cart -
Tacoma 3rd Gen (2016-2023)Ships FREE !!
within 48 US StatesDirt King Performance Tacoma Lower Control Arms for 2016-2023
- Suits 2016-2023 3rd Gen Toyota Tacoma 2WD / 4WD
- CAD designed
- Formed steel bushing gussets
- Internally ribbed with extrusions for weight reduction
- Preassembled for fast installation
- Grease fitting ports for easy servicing
- Zinc plated components for corrosion resistance
- Bump stop plating
- Limit strap tabbing
- Bypass shock tabbing
- Professionally MIG welded
- Proudly made in the USA
$1,849.00 Add to cart -
WinchesShips FREE !!
within 48 US StatesWarn 103255 VR Evo 12-S Winch 12K | Synthetic Rope
- Winch; VR12-S; Vehicle Mounted; Vehicle Recovery Winch; 12 Volt Electric; 12000 Pound Line Pull Capacity; 90 Foot Synthetic Rope; Hawse Fairlead; Wired Remote; Planetary Gear Drive
- Black Tactical Look Puts You At The Head Of The Off-Road Pack
- Waterproof Albright® Contactor Control For The Ultimate In Reliability
- One-Piece Tie Plate Replaces Tie Rods For Added Strength And Rigidity
- Convertible Control Pack Allows Upright Or Low-Profile Winch Mounting
- Powerful, Efficient Series-Wound Motor
- Best-In-Class Load-Holding Cone Brake For Superior Control
- Limited 7 Year Warranty
- Winch Rating: 12000 Pound
- Recommended Use: Jeep/Truck/SUV
- Operation Type: Electric
- Mount Type: Fixed Mount
- Voltage: 12 Volt
- Free Spooling: Yes
- Line Length (FT): 90 Feet
- Line Material: Synthetic
- Mounting Pattern Size: 10 Inch Length X 4-1/2 Inch Width
- Brake Type: Spring Applied Disc
- Max Amp Draw: 396 Amp Draw At 12000 Pound
- Gear Reduction Ratio: 234:1
- Includes Mounting Hardware: Yes
- Thermal Shutoff: No
- Color: Black
- Fairlead Type: Hawse
- Remote Type: Wired
- Line Speed At Max Pull: 4 Feet Per Minute At 12000 Pound
- Electrical Control Type: Contactors
- Motor Type: Series Wound
- Drive Gear Type: Planetary
- Line Diameter (IN): 3/8 Inch
- Mounting Hole Quantity: 4
- Drum Material: Steel
- Estimated Install Time (Hours): 2
- Warn Warranty information is all listed here: https://www.warn.com/warranties
$979.98 Add to cart -
Performance Upgrades - Lexus GX460Ships FREE !!
within 48 US States10% Off For Memorial Day!!
Use coupon code MEMORIALDAYPowerbrake D-Line HP Rotor and Pad Kit | Lexus GX460 Rear
- Suits Lexus GX460 2010-2023 Rear
- Also available for the FRONT
- Powerbrake D-Line Features
- Rotors are cast from a proprietary high carbon cast-iron alloy.
- Rotors are machined to tolerances up to three times tighter than the industry norm.
- All Powerbrake rotors feature our MTR (Max Temperature Recording) system.
- Proprietary black disc surface coating ensures quicker bed-in and max brake performance.
- Spiral slots on the rotor fiction surface clear friction gasses, debris and water.
- Matched high friction PB05 brake pads take the guesswork out of pad selection.
- Pad compound PB05 is manufactured in Japan and has been specifically formulated for use on 4×4 vehicles
- Powerbrake D-Line Benefits at a Glance
- Reduced stopping distances in both wet and dry conditions.
- Reduced brake fade and improved brake consistency.
- Improved initial brake response (bite).
- Improved brake modulation particularly during emergency stops.
- Improved resistance to rotor distortion (warping) and cracking at high temperatures.
- What’s Included in Powerbrake D-Line?
- 2 x Standard OEM diameter high performance slotted rotors for your 4WD or truck – Made in South Africa.
- An axle set of matched PB05 high-performance brake pads – Made in Japan.
- Fits as per a standard rotor and pad change, using the vehicle’s original calipers.
$840.00 Add to cart -
Sale!WheelsShips FREE !!
within 48 US StatesWarn 106687 Diamond Cutter Wheel – 17×8.5″ 5×5 0″ Offset – Black
- Warn wheels made specifically for Jeep Wrangler JL, JK, and Gladiator JT.
- 17×8.5″ wheel with 0 Offset, 4.75″ backspacing, 5 lugs, Uses OEM Jeep lug nuts
- Sold Individually
- Black Finish
- 1 Piece Cast Aluminum Construction
- Compatible With TPMS (Tire Pressure Monitoring System)
- With Warn Logo Center Cap
- Limited Lifetime Structural Warranty
- When Installing On A 2020+ Jeep Wrangler The OEM TPMS Sensor Can Be Used But Must Be Turned In The “UP” Position And It Will Not Lay Flat Against The Wheel
- Bolt Pattern Inch: 5×5.00
- Bolt Pattern Millimeter: Not Applicable
- Diameter: 17
- Width: 8.5
- Offset: 0
- Backspacing: 4.75
- Material: Aluminum
- Finish: Painted
- Color: Black
- Bolt Pattern Inch: 5×5.00
- Bolt Pattern Inch: Not Applicable
- Bolt Pattern Millimeter: 5×127
- Bolt Pattern Millimeter: Not Applicable
- Lug Nut Seat Type: 60 Degree Conical
- Center Cap: See Replacement Items
- Center Bore: 71.50
- Lug Nut Design: Acorn
- Compatible With TPMS (Tire Pressure Monitoring Sys: Yes
- Basic Design: 5 Spoke
- With Inserts: No
- Load Capacity: 2100
- Size: 17×8.5
- Max Tire Diameter: 40
- Center Cap Design: Warn Logo
- Structural Warranty: Lifetime
- Quantity: Single
- Construction: One Piece Cast
- With Hub Centric Ring: No
- Estimated Install Time (Hours): 0.5
- Prop 65 WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- This item is not returnable – any product damage must be reported to the shipping carrier within 48 hours of receipt.
Original price was: $352.93.$299.99Current price is: $299.99. Add to cart -
Bronco 2021-2024+
Dobinsons Adjustable Rear Lower Control Arms | Bronco 2021+
- Suits all 2021+ Ford Bronco (fullsize)
- Comes with high quality rubber OE style bushings installed for maximum flexibility, and zero noise
- Made from HSLA (High Strength Low Alloy) Steel
- 40mm OD and 6mm wall thickness with support brace
- Oversized adjusters and rod thickness for maximum strength and durability with double-nut locking feature
- Zinc plated, then E-coated black, for the ultimate finish and protection
- Sold as a pair
- Photos for illustration purposes
$410.00 Add to cart -
ExceptionsShips FREE !!
within 48 US StatesBack in Stock Now!!Dobinsons IMS59-50220 Front IMS Struts | 05-23 Tacoma GX470 03-09 4Runner 06-09 FJ Cruiser
- Fully rebuildable and re-valvable
- Extended Travel – 567mm extended, 417mm compressed
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
$650.00 Add to cart -
All Pro OffroadShips FREE !!
within 48 US StatesAll Pro Tacoma IFS Skid Plate – Steel Black Coated
- Suits 2005-2023 Toyota Tacoma 4×4 Models
- Covers from the front bumper down to the first cross member
- 3/16-inch steel – Black Powder Coated Steel
- Optimal balance between strength and weight
- Save yourself from costly underbody repairs with this easy to install Tacoma skid plate
- Easy, bolt-on installation using all factory hardware
- Compatible with stock bumpers
- Available in 4 variants – Steel or Aluminum, Bare or Powder Coated
- Installation Instructions
$440.00 Add to cart -
Sale!Camping EquipmentShips FREE !!
within 48 US StatesPortable Changing Room With Shower and Storage Bag
- Quick set up with compression hub and pre-threaded telescoping poles
- Large dual zippered D Shaped Door; Tent material rated at 800mm PU coated for wet weather
- Floor can be clipped up or down for use; Towel strap, amenities pockets, and shelf for solar shower which is included: 2 zippered mesh rooftop windows
- Open size 5 w x 5 d x 6.75 foot h. Packed size 41 inch x 6.5 Foot Weight 16 lbs
- Includes: tent stakes, guidelines, Solar Show Caddy and oversized carry bag for easy packing
- Large, easy to use privacy tent, camp toilet, camp shower and changing room
- Floor can be clipped up or down
- Clip floor up for camp restroom or open floor shower (Open floor with 37 inch x 37 inch space)
- Clip floor down for showering or changing without getting your feet dirty (5 x 5 foot space)
- Large D-shaped door for easy in-and-out access
- 5 x 5 foot of floor space, the most of any Privacy Tent
- Over 7 foot tall for plenty of head room without having to hunch over
- Solar shower bag holder With a 2 gallon shower bag Included
- Two large mesh pockets to hold your amenities such as shampoo and soap
- A long towel or clothes line for hanging items
- No Assembly Required, Easy Set up and take down
- Thick upper fiberglass poles combined with thick lower telescoping steel poles
- Included Guidelines for increased stability if needed
- 190T Polyester material with 800mm PU coating for rain resistance, durable PE floor
- Oversize carry bag to make it easier when packing the Privacy Tent
- Lots of room for a toilet, showering, or for changing your clothes
Original price was: $179.99.$125.99Current price is: $125.99. Add to cart -
BrakesShips FREE !!
within 48 US States10% Off For Memorial Day!!
Use coupon code MEMORIALDAYPowerbrake X-Line 4×4 Toyota Tacoma Big Brake Kit for 2005-2023 Stage 1
2005-2023 Toyota Tacoma Big Brake Kit Includes:
- X-Line billet 6-piston off-road calipers (pair)
- High-performance brake pads, pre-loaded into the calipers
- 1-Piece 350mm x 34mm (13.77″ x 1.33″) 48-vane discs
- Curved, directional cooling vanes
- Billet caliper mounting brackets
- Stainless steel braided brake lines
- All necessary mounting hardware for quick, easy bolt-on installation
- Comprehensive fitment and bed-in instructions
- For 6-Lug models only (Pre-Runner and 4×4 models)
- Now Includes Upgraded Powerbrake Pads, PB05 Compound – highest level 4×4 brake pads available – made in Japan
- Manufactured, finished and packaged 100% in South Africa
- REQUIRES 17″ WHEELS FOR ADEQUATE CALIPER CLEARANCE
$2,675.00 Select options -
Air Compressors
ARB CKMA12 High Performance Medium 12V Air Compressor
- Designed specifically to run one or two Air Lockers and to air up tires (requires kit)
- Constructed of lightweight, high-strength, engineering-grade materials, including military and aerospace-grade components
- Relocatable, splash-resistant air filter with washable high-flow sintered bronze filter cartridge for cleaner, cooler air supply
- Fully sealed components for moisture and dust protection
- Over-pressure safety valve-equipped
- Pressure switch-controlled air manifold system specially designed for ARB Air Lockers
- Hard-anodized cylinder bore and PTFE-impregnated carbon fiber piston seal for reduced friction and maximum life
- Anti-vibration, sound-deadening, anodized mount dissipates motor heat and allows compressor to be repositioned 180 degrees
- Ball bearing-equipped motor (no bushings) with unique, linear brush, pre-load system for long life, low heat, and quiet operation
- Compressor piston equipped with a German-made, high shock-rated, cylindrical roller bearing
- Motor is internally thermal-protected against extreme temperature damage
- Comprehensive-photo illustrated installation guide
- 12V DC, Draws 14.2 Amps, 2.34 CFM, 100 PSI max
$338.00 Add to cart -
Suspension
Dobinsons High Clearance Outer CV Boot Kit | Tacoma 4Runner FJ Cruiser GX470 GX460
- Complete OUTER kit includes 2 new OUTER boots, grease, and required clips – For 1 vehicle
- If you’re doing a full CV rebuild, you may need more CV grease from your local parts store
- Made of high quality rubber for maximum life
- Great for lifted SUV’s and Trucks with high CV angles
- Suits Lexus GX470, Lexus GX460, Toyota 4Runner 4th and 5th Gen (all from 2003-2024), Toyota Tacoma 2nd and 3rd Gen (all from 2005-2023), Toyota FJ Cruiser (all years)
- Inside shape is round
- These still install the old fashioned way without custom stretch boot tools needed
$60.00 Add to cart -
WinchesShips FREE !!
within 48 US StatesOVS SCAR Waterproof 12K Winch | Synthetic Rope | Wireless Remote
- Single Line Rated Pull: 12,000lb
- Motor: 7.0hp Series Wound
- Waterproof: IP68 Rated
- Voltage: 12V
- Control: Wireless Remote w. 11.5’ Lead with Built in Lithium Battery
- Gear Train: 3 Stage Planetary Gear Systems with Ring Gear
- Gear Ratio: 218:1
- DB Output: Low (it’s quiet)
- Clutch: Rotating Ring Gear
- Braking Action: Automatic Out-Of-Drum
- Drum Size: 2.5” x 8.8”
- Mounting Bolt Pattern: 10” x 4.5”
- Overall Dimensions: 21.3” L x 6.3” W x 7.9” H
- Line Speed: 42’ Per Minute
- Steel Cable: 3/8” x 85’
- Hook: Heavy Duty with Clip
- Fairlead: Aluminum Hawse Fairlead
- Electric Cable: 70” x 25 mm2
- Solenoid: 500A (Heavy – Duty)
- Recommended Battery: 650CCA Minimum.
- Weight: 66 lbs
- Warranty: Limited Lifetime Warranty Mechanical,
- 5 Year Electrical
$599.99 Add to cart -
Tacoma 2nd Gen (2005-2015)Ships FREE !!
within 48 US StatesDirt King Performance Tacoma Lower Control Arms for 2005-2015
- Suits 2005-2015 2nd Gen Toyota Tacoma 2WD / 4WD
- CAD designed
- Formed steel bushing gussets
- Internally ribbed with extrusions for weight reduction
- Preassembled for fast installation
- Grease fitting ports for easy servicing
- Zinc plated components for corrosion resistance
- Bump stop plating
- Limit strap tabbing
- Bypass shock tabbing
- Professionally MIG welded
- Proudly made in the USA
$1,849.00 Add to cart
Cart totals
| Subtotal | $83,995.00 |
|---|---|
| Shipping |
Shipping to FL. |
| Tax | $6,299.73 |
| Total | $91,600.73 |
