Your cart is currently empty!
Shop
Showing 391–420 of 1944 resultsSorted by popularity
-
AccessoriesDobinsons 200 Series Drawers for Toyota Land Cruiser 2008-2019
- Complete drawer system for the back of your 200 Series Land Cruiser or Lexus LX570
- Optional side wing kit and drawer dividers and table top
- 1.6mm Zinc Plated Robust Steel Construction
- 12mm Heavy Duty Plywood Panels with Marine Carpet Covering
- Built in Heavy Duty Fridge Slide
- 8 x Heavy Duty Stainless Steel Tie Down Points
- Comprehensive outer wing trim kit to provide a factory fit (optional)
- Super clean installation and DOES NOT rattle unlike some other drawer systems on the market
- Aluminum Edging Protection, Heavy duty lockable latches
- Massive 150KG (330LB) Drawer Capacity on Heavy Duty Roller Bearing System
- Add optional Dobinsons Rear Drawer Table Top for better useability of the drawer
- New body style will need longer bolts and extra washers
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address
(10 reviews) -
4Runner 4th Gen (2003-2009)ETA is late December
Dobinsons Tubular UCA Pair | 4Runner FJ GX470 GX460 – No Ball Joints
- Set of upper control arms for both left and right hand side, includes OE style rubber frame bushings and washers
- Uses OE replacement ball joints – not included in this page
- NOTE: This set DOES NOT INCLUDE ANY BALL JOINTS – you can buy your own OEM replacements and install them
- Has 3 degrees of caster built in, no adjustability or settings required
- Has more clearance around the ball joint than factory UCA’s for better tire clearance
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Works for any lift height, as factory alignment correction will be enhanced with these
- Curved washers face outwards away from bushings during installation, per the product video
- Product Video
- Includes left and right arms, ball joint caps, and hardware to mount ABS lines
- Also available with ball joints installed, here
- Replacement Ball Joints can be ordered here
(8 reviews) -
Performance Upgrade - 5th Gen 4RunnerFREE SHIPPING
within 48 US StatesPowerbrake D-Line HP Rotor and Pad Kit | 4Runner 10-24 Rear
- Suits Toyota 4Runner 5th Gen 2010-2024 Rear
- Also available for the FRONT
- Powerbrake D-Line Features
- Rotors are cast from a proprietary high carbon cast-iron alloy.
- Rotors are machined to tolerances up to three times tighter than the industry norm.
- All Powerbrake rotors feature our MTR (Max Temperature Recording) system.
- Proprietary black disc surface coating ensures quicker bed-in and max brake performance.
- Spiral slots on the rotor fiction surface clear friction gasses, debris and water.
- Matched high friction PB05 brake pads take the guesswork out of pad selection.
- Pad compound PB05 is manufactured in Japan and has been specifically formulated for use on 4×4 vehicles
- Powerbrake D-Line Benefits at a Glance
- Reduced stopping distances in both wet and dry conditions.
- Reduced brake fade and improved brake consistency.
- Improved initial brake response (bite).
- Improved brake modulation particularly during emergency stops.
- Improved resistance to rotor distortion (warping) and cracking at high temperatures.
- What’s Included in Powerbrake D-Line?
- 2 x Standard OEM diameter high performance slotted rotors for your 4WD or truck – Made in South Africa.
- An axle set of matched PB05 high-performance brake pads – Made in Japan.
- Fits as per a standard rotor and pad change, using the vehicle’s original calipers.
(11 reviews) -
Sale!15% off Year End SaleUpper Control Arms
Pair of UCA Pivot Bolts and Nuts | Toyota and Lexus
- This is a pair of factory size upper control arm pivot bolts and nuts replacements to service two control arms
- Commonly referred to “as the long UCA bolt”
- Services both control arms at once
- Does not come with any washers. New aftermarket UCA’s usually come with the necessary washers
- Vehicle Fitment
-
- 2003-2009 Toyota 4Runner
- 2010-2024 Toyota 4Runner
- 2005-2015 Toyota Tacoma
- 2016-2023 Toyota Tacoma
- 2006+ FJ Cruiser (all years)
- 2003-2009 Lexus GX470
- 2010-2023 Lexus GX460
- Toyota Hilux Vigo
- Toyota Hilux Revo
- Toyota Fortuner
- Toyota Prado 120
- Toyota Prado 150
- Bolt Grade: 10.9
- Head Drive Type: Hex
- Length: 351 mm
- Material: Steel
- SAE or Metric: Metric
- Thread Diameter: 14 mm
- Thread Length: 28.7 mm
- Thread Size: 14 mm
- Thread Type: Fine
(4 reviews) -
Dobinsons
Dobinsons C59-849V 3.0″ Lift w/1000LBS+ Constant Load Coil Springs | 4Runner GX460 – Pair
- Suits 2003-2024 Toyota 4Runner and 2010-2023 Lexus GX460 – Lifts 3.0″ with a minimum of 1000LBS of added rear constant weight (bumper, drawers, fridge, RTT, etc)
- Heaviest Long Travel and Variable Rate coils available worldwide for Toyota and Lexus SUV’s
- These are not for you if you don’t have at least 1000LBS of rear constant weight bolted to the back end of your SUV at all times!!!
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Teal Color ONLY
- Sold in Pairs
- Important: Read first line below in description before proceeding!!!
- 500mm free height, 19mm wire, variable rate 314-371 LBF/in at ride height/loaded
(8 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons MRA59-A446 3-Way Adjustable Front Struts Pair | Tundra 22+, Sequoia 23+
- Suits Toyota Tundra 2022-2024+ and Toyota Sequoia 2023-2024+
- Can be used with OEM coils or with Dobinsons lifted coils
- Height adjustable with a fully threaded body
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- SOLD IN PAIRS
- Full 2 year limited warranty, no set rebuild time period
- Does not include coil springs or top mounts – sold separately
- Must mount the banjo fitting and hose inwards on MRA struts
- Coil seat for MRA59-A446 should be set at 175mm (6.87″) from the strut bushing eye
- Installation Instructions
(14 reviews) -
Full Suspension Kits - 4th Gen 4runnerFREE SHIPPING
within 48 US StatesDobinsons 1-3.5″ 3-Way Adjustable MRA Coilovers for Toyota 4Runner 4th Gen
- Suits 2003-2009 Toyota 4Runner 4th Gen 4×4 Models
- Looking for a quick and easy way to lift your 4Runner? This is your answer
- A 4×2 model lifts 1″ extra with the 4×4 lift heights
- Select your desired lift height and spring rate – we’ll take care of the rest!!
- Dobinsons MRA are height adjustable by a fully threaded body
- The Dobinsons MRA Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- Extended Travel – 567mm extended, 417mm compressed
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
- Resi installation instructions
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle. Adding 2.5″ or more lift, new UCA’s should be added for proper articulation and correct wheel alignment
- Link to Matching rear shocks
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
(8 reviews) -
Airbag Kits
Air Lift 60769 Air Spring Kit Rear Helper Airbags for 2-3″ of Lift
- Suits all 3rd/4th/5th Gen 4Runners, FJ Cruiser, GX470, GX460 WITH 2-3″ of Lift
- Also Suits Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- These are an alternate to Firestone 4108
- Complete kit – 1 per vehicle
- Inserts inside your rear coil springs to add additional load support
- Manually inflate or deflate the air bags to add or remove support or height
- Perfect for people who tow, or regularly load up fully and need additional height or support
- Route the airlines to your rear bumper or a suitable place to easily add or remove air to the bags
- Ships from multiple warehouses across the country for faster shipping times
- Fitment Notes: NOTE: Custom modifications may be required for lifted applications to ensure air bags are properly supported. If using on a lifted application, do not follow bump stop/jounce cut instructions. You will need to determine where to cut based on your lift amount (not cutting off as much depending on lift height)
- Installation Manual, Click Here
(3 reviews) -
Sale!AwningsFREE SHIPPING
within 48 US StatesHD Nomadic Car-Side Shower Room
- Use this for a shower, use it for changing clothes, a quick change room, use it for a portable toilet enclosure, or whatever else you can think of!!
- Hide inside it and scare the crap out of your camping buddies when you’re out in the middle of nowhere!!
- Manufactured from a high performance 420D Oxford Rip Stop fabric and aluminum folding arms enclosed in rugged 1000D waterproof PVC integrated storage bag
- Mounts to roof rack with supplied L brackets and mounting stainless steel hardware
- This does NOT have a roof/ceiling, it is open at the top
- Quick and easy setup, simply unzip, fold out and stake down
- Curtain hems weighted with structural poles to keep shape – 42 Inch (L) X 42 Inch (W) X 76 Inch (H) with adjustable straps to accommodate various vehicle heights
- The front curtain wall features a heavy duty dual sided zip which allows easy access in and out of the Nomadic Car Side Shower
- Velcro strap to secure a shower head and two (2) internal pouches
- Download Instructions
(8 reviews) -
40 Series Land Cruiser Early (1960-1979)
Dobinsons TOY-034-R Rear Medium Load Leaf Springs Pair for FJ40 BJ40 up to 1979
- Rear Leaf Springs for the Toyota FJ40 BJ40 up to 1979 with 25mm spring eyes
- 45mm rear lift with stock rear end weight
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Sold as a pair, springs only
(5 reviews) -
40 Series Land Cruiser Early (1960-1979)
Dobinsons HJ40-7L-F Front Medium Load Leaf Springs Pair for FJ40 BJ40 up to 1979
- Front Leaf Springs for the Toyota FJ40 and BJ40 up to 1979 with 25mm eyes
- 45mm front lift with stock front end weight
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Sold as a pair, leaf springs only
- Photos are for illustration purposes
(3 reviews) -
LJ70, LJ72, LJ73, LJ77 - 90-93 - Square Headlights
Dobinsons C59-289 1.75″ Rear Coil Springs | LAND CRUISER 70 Series Multiple Models – Pair Teal
- Dobinsons C59-289 Rear Coil Springs for TOYOTA LAND CRUISER LJ70, LJ72, LJ73, LJ77 1/90-5/93 1.75″ and 70 Series Prado I, Land Cruiser II, LJ78/79, RJ70, RJ77, KZJ78 – 87-96 with stock rear weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold as a Pair
(9 reviews) -
Hats Shirts Patches
Exit Offroad Flexfit 6277 Adult Wooly 6-Panel Hat
- Classic Exit Offroad embroidered logo on front left
- Baseball cap with wool-like fabric
- Hard buckram. Structured
- Closed back. Stretch fitted
- Silver undervisor, 8-row stitching on visor
- Available in 3 different sizes. Refer to attached size chart before ordering
- Super comfortable fitted hat – now with XL/XXL size for big heads!!!
(0 reviews) -
Sale!15% off Year End SaleAdd-a-Leaf
Wheeler’s 1″ Lift Add-A-Leaf Set for 2007-21 Tundra
- Suits 2007-2021 Toyota Tundra
- Includes 2 single add-a-leafs and 2 longer center pins
- Works with factory length u-bolts or aftermarket
- Adds 1.0″ of lift approximately. Different bed/cab configurations could see variations in lift height
- Added constant load on the rear of the truck may reduce the total added lift height, but this will support additional weight better than the stock leaf pack
- Feature diamond cut ends and anti-friction pads for smooth, squeak free performance
- Instructions
(5 reviews) -
4Runner 5th Gen (2010-2024)FREE SHIPPING
within 48 US StatesDobinsons IMS Leveling Kit Toyota 4Runner 2010-24
- Leveling Kit for upgrading the performance of your vehicle with new Dobinsons IMS struts and shocks
- If you have a 2WD model, add 1″ to the listed lift heights of the front coils due to the lighter front weight of the vehicle
- A stock 4runner comes from the factory with 2″ of rake (the rear is 2″ higher than the front). To completely level the vehicle and remove all rake, you would lift the front 2″ and leave the rear stock. It is recommended to leave 1″ of rake though to be able to carry a car full of people or loaded up for camping, etc. It is not advisable to leave the rear lower than the front.
- Can reuse the OE coils, or upgrade to Dobinsons
- Recommended would be 1-1.5″ up front and stock height rear
- Standard IMS coil seat height should be set to 213mm (8.39″). Every 1/4″ added beyond that adds 1/2″ of lift height measured at the wheel.
- Nitrogen Gas Charged Monotube IFP Shocks, Superior Design, thicker walls, longer travel
- IFP – Internal Floating Piston for excellent ride quality from the shocks
- Optional High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Lift heights are based on the standard 20″ front and 22″ rear, measured from the center of the hub up to the fender edge. Many vehicles come in at different heights from the factory based on trim levels and options
- Base Kit Includes 2 Front IMS Monotube Struts, 2 Rear IMS Monotube Shocks
- Suspension Installation Video
(10 reviews) -
200 Series Land Cruiser (2008-2021)
Dobinsons C59-547 2″ VHD Land Cruiser 200 Series Rear Coils – Pair
- C59-547 – 2″ lift with 880LBS constant rear weight, 2.5″ with 550LBS
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 520/490mm free height, 248LBF/IN Spring Rate
- Sold as a Pair – marked side specific for installation
(3 reviews)$305.00 Select options This product has multiple variants. The options may be chosen on the product page -
4Runner 5th Gen (2010-2024)
RCI Rock Sliders | 5th Gen 4Runner 2010-2024
- Protects rocker panels and doors
- Our sliders utilize a 2″ square main tube which is far stronger than 1.75″ round tube used by competitors
- 1.75″ DOM outer rails are now standard for uncompromised strength
- Heavy duty 1/4″ gussets on all legs
- 45 degree mitered main tube ends provide a superior aesthetic appearance as well as more functional design that won’t hang up
- Full length 1/4″ frame plate provides up to 15 mounting points on each side of the vehicle, guaranteeing a slider as strong or stronger than anything else on the market
- Easily capable of supporting the entire side of truck for lifting with hi-lift, or sliding on rocks
- Standard with 20 degree upward angle, creates a low profile with maximum ground clearance
- Direct bolt on addition to existing mounting locations, no drilling required
- Easy install with only basic hand tools
- Grade 8 hardware and installation instructions provided
- Standard with our signature low profile rear kickout
- Made to order from your selections below
- Made in USA
(3 reviews) -
Suspension
Dobinsons SK45-054 Greasable Shackle Kit Pair for Nissan D40 D41 Frontier Xterra
- Suits Nissan Frontier D40 and D41 and Nissan Xterra (2005-2015)
- 90 degree greasable design
- Reduces friction in bushes, creating a more comfortable ride
- Heavy duty design and provide simple service through external grease nipples
- Sold as a pair to replace the original shackles
- Incredibly tough and durable gold zinc plating
- Photo is of exact product.
- Also available with 1″ of lift
(6 reviews) -
Accessories
Dobinsons GX460 Drawers for Lexus GX460 2010-2023
- Suits 2010-2023 Lexus GX460
- 1.6mm Zinc Plated Robust Steel Construction
- 12mm Heavy Duty Plywood Panels with Marine Carpet Covering
- Built-in Heavy-Duty Fridge Slide
- 8 x Heavy Duty Stainless Steel Tie Down Points
- Comprehensive optional outer wing trim kit to provide a factory fit. Installation of drawers may REQUIRE drilling and bolting through floor if suitable holes are not in the floor already
- Aluminum Edging Protection
- Heavy duty lockable latches.
- Sliding portion is not changeable from one side to the other.
- Not compatible with 3rd row seat installed.
- Massive 150KG (330LB) Drawer Capacity on Heavy Duty Roller Bearing System
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address
(3 reviews) -
Tundra 2nd Gen (2007-2021)
Dobinsons Rear Leaf Springs Options for Toyota Tundra 2007-21
- Suits Toyota Tundra 2007-2021
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride
(9 reviews) -
Tundra 2nd Gen (2007-2021)
Dobinsons C59-610 Front 2.25″ Lift Coil Springs for Toyota Tundra 4×4 2007-2021 – Pair
- 2.25″ lift with a bumper and winch installed
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations. Durable Powder Coat Finish
- Extended length new front struts will be required to use these coils, such as GS59-710 Dobinsons Struts
- Sold in Pairs
- 737LBF/in spring rate
(16 reviews)$405.00 Select options This product has multiple variants. The options may be chosen on the product page -
Sequoia 1st Gen (2001-2007)
Dobinsons 1.75-2.5″ Sequoia Suspension Kit for 2001-2007 4.7L V8
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base Kit Includes 2 Front Struts, 2 Rear Shocks, and 4 Coil Springs
- Additional parts can be added from the drop down menus
- All 3 different Dobinsons shock types are available to choose from below
(9 reviews) -
Dobinsons
Dobinsons Sway Bar Drop Bracket Kit | Tundra Sequoia
- Suits 2022+ Toyota Tundra and 2023+ Toyota Sequoia
- Lowers stock front sway bar for better working angle
- Includes machined aluminum spacers
- Easy bolt-on installation
- Includes new correct grade longer hardware
- Recommended for lift heights of 2″ or more to correct sway bar operating angle
(0 reviews) -
Suspension
Dobinsons Upper Coil Spring Isolator Pair
- Adapter upper strut mount isolators to run Dobinsons C59-300, C59-302 or C59-314 coils on GS59-222, IMS59-50222 or MRA59-A222 struts on 1st Gen Tundras and Sequoias
- Not needed if using C59-344 coils
- Also, these fit the SC59-001 and SC59-002 strut mounts to replace those pieces if necessary
- Sold as a set, 2 pieces, enough for 1 vehicle
- Made of natural rubber
- Assemble To Chassis Same Way As OEM
- Maintains Factory Ride Characteristics
(4 reviews) -
Rear Drawers
Dobinsons Rear Drawer Divider – Suits Narrow Sizes
- 1.6mm Zinc Plated Robust Steel Construction
- Sold individually
- Marine Carpet Covering
- Easy installation with 4 pre drilled holes
- Suits RD80-1001 and RD80-1004 model drawer sizes
(3 reviews) -
Rear Drawers
Dobinsons Rear Drawer Table Top – 18.75″ Wide
- 1.5mm Stainless Steel Construction
- 24.75″ x 18.75″ added work space
- Laser cut towel hangers and bottle opener
- Works with drawer open or closed, inside or out!
- Drawer system not included
- Suits RD80-1000 and RD80-1003 – each drawer is 18.75″ Wide
- Suits drawers that go into Land Cruisers
(3 reviews) -
Sequoia 3rd Gen (2023-2024+)
Dobinsons Rear Coil Spring Options | Toyota Sequoia 2023+ – Pair
- Suits Toyota Sequoia 2023+, choose the appropriate lift height that also matches any added weight you’ve put on the car
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Coils are Sold in Pairs
- Lifting the rear 2″ requires a new Panhard Rod to re-center the axle
- Lifting 1″ or more, new rear sway bar links are necessary
- 2″ of rear lift also requires longer shocks than stock
(14 reviews) -
Dobinsons
Dobinsons Front Coil Spring Options for Lexus GX460 2010-2023 – Pair
- Choose what coil suits your vehicle and needs the best
- Sold as a Pair
- Stock weight = all stock front end | 110 LBS is usually a slim line bumper and winch with synthetic line | 220 LBS is usually a full width steel bumper with a winch and synthetic or steel line | 300+ LBS is usually a full with steel bumper, winch, dual batteries, and skid plates
- OE spring rate on a V8 GX460 is 730LB (same as the C59-350, 352,354). Lighter than stock springs shouldn’t be use unless you want it softer than stock, which will increase nose diving while braking.
- C59-300 – 1.5″ with stock weight (comfort spring rate)
- C59-302 – 2.0″ with stock weight (comfort spring rate)
- C59-314 – 2.5″ with stock weight (comfort spring rate)
- C59-350 – 2″ with stock weight
- C59-352 – 2.5″ with stock weight, 2″ with 110-220lbs weight
- C59-354 – 2″ with 220-350lbs weight, 2.5″ with 110lbs weight
(8 reviews) -
Tundra 3rd Gen (2022-2024)
Dobinsons 2.5″ Lift Rear Coil Springs for Toyota Tundra 2022+ – Pair
- Suits Toyota Tundra 2022+, lifts the rear 2.5″ with stock weight (no accessories)
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- Installation Note: Transfer over the OEM coil isolators from the stock coils to these to prevent coil slap
- Will not work with stock shocks, they’re not long enough. Click here to see shock options
- Stock base model shocks are ok with 1″ lift but they’re not very long. TRD Pro rear shocks are ok for up to 2″ of lift
(8 reviews)
