Your cart is currently empty!
Shop
Showing 931–960 of 1944 resultsSorted by popularity
-
ExcludedFREE SHIPPING
within 48 US StatesExpedition Truck Cap Crossbars | Mid Size Truck 51.25″(Pair)
- Designed to work with OVS Expedition Caps
- Cross bars are compatible with most roof rack accessories
- Ideal for mounting tents, awnings, shower tents, storage boxes, kayaks, skis, and more
- Removable end caps for easy access to T-slot attachments
- Weatherproof design resists rust and corrosion
- Sturdy aluminum construction supports up to 325 lbs dynamic and 750 lbs static with OVS Expedition Caps
- Aerodynamic, low-profile 2.75” design reduces wind noise
- Sleek, finished look with end caps
- Includes risers and all necessary hardware for easy installation
- Sold in pairs
- Available in 3 width sizes: 51.25”, 55”, and 72”
(0 reviews) -
Sale!
SuspensionSpindle Gussets | Tacoma 4Runner FJ Cruiser GX470 GX460
- Suits 2005-23 Toyota Tacoma, 2003-2024 4Runner, 2007-16 FJ Cruiser, Lexus GX470, GX460
- The factory Toyota spindles commonly bend during extreme off-road use
- Our spindle gussets solve this issue by reinforcing the problematic areas
- The preformed gussets simply weld to the factory forged spindles, dramatically increasing the strength
- This product is designed to allow for maximum wheel backspacing and eliminates the use of the factory sway bar
- Check out this in depth review on the product: [Trail Tacoma]
- Welding Required
- Factory sway bar will not be reused
- Made in the USA
(0 reviews) -
GX470 (2002-2009)
Apache Offroad Lexus Airbag Conversion Kit for GX470 GX460
- Suits Lexus GX470 and GX460 that came standard with airbags
- Add this kit and a pair of coil springs (not included) to remove the factory airbags
- GX470 rear coil springs and GX460 rear coil springs
- Simple bolt-in design
- High quality steel base, powder coated, with all proper grade hardware
- OE quality upper rubber coil isolators with built-in bump stops
- All inclusive kit, nothing else is needed except for suitable coil springs
- Does not add any lift height for the vehicl
- No coil springs are included, they are sold separately
(10 reviews) -
Bump Stops & Spacers
Apache Offroad Rear Upper Coil Isolators Pair | 4Runner FJ Cruiser GX470 GX460
- Pair of aftermarket upper rubber coil isolators for Toyota and Lexus SUV’s
- These sit on top of the rear coil springs to properly isolate them from the frame, and also add the internal bump stop that these vehicles are intended to have
- If you have had an airbag conversion done incorrectly, or if you had to modify your isolators to add air bags and now need to go back, these are what you need
- Sits on top of rear coils
- Aftermarket version of the OEM Toyota Part Number 48302-35050
- OE quality upper rubber coil isolators with built-in bump stops
- Sold as a pair, 1 per vehicle needed
- Suits:
- 2003-2024 Toyota 4Runner
- 2007-2019 Toyota FJ Cruiser
- 2002-2009 Lexus GX 470
- 2010-2023 Lexus GX 460
(10 reviews) -
Brake Lines
Apache Offroad Extended Rear Brake Lines for 4Runner FJ GX470 GX460
- D.O.T. Certified stainless steel braided and coated with a PVC cover
- 20″ long, works with long travel rear suspension setups
- Suits up to 4″ of lift with long travel shocks or not
- Suits the following vehicles: Toyota 4Runner 4th Gen 2003-2009, Toyota 4Runner 5th Gen 2010-2024, Toyota FJ Cruiser all years, Lexus GX470 all years, Lexus GX460 all years
- Not recommended for stock or un-lifted vehicles, as the brake lines are much longer than necessary
- Sold as a pair with new retaining clips
- Warranty- 2 Year unlimited mile warranty against manufacturers defects.
(10 reviews) -
Tundra 3rd Gen (2022-2024)FREE SHIPPING
within 48 US StatesDobinsons MRA59-A885 2.6″ 3-Way Adjustable Rear Shocks Pair | Long Travel
- Suits 2022+ Toyota Tundra Rear with 3.0″ of Lift in a long travel setup
- 3-way adjustable valving – Adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 22mm / 7/8″ shaft diameter
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Piggyback Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- 714mm extended, 440mm compressed
- Installation Instructions of the MRA Shocks
(0 reviews) -
250 Series Land Cruiser (2024+)FREE SHIPPING
within 48 US StatesDobinsons IMS59-60660 2.6″ IFP Front Struts Pair | 2024+ Land Cruiser 250
- Suits Toyota Land Cruiser 250 Series 2024+
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- 22mm / 7/8″ shaft diameter on front struts
- Full 2 year limited warranty, no set rebuild time period
- Standard coil seat height should be set to 237mm (9.3″) from the center of the lower hole to the base notch where the coil sits
- SOLD IN PAIRS
- Shocks do not suit any models that have factory electronic adjustable Shock Absorbers
- Photos for illustration purposes only
(0 reviews) -
LJ70, LJ72, LJ73, LJ77 - 90-93 - Square Headlights
Dobinsons C59-289B 1.75″ Rear Coil Springs | LAND CRUISER 70 Series Multiple Models – Pair Black
- Dobinsons C59-289 Rear Coil Springs for TOYOTA LAND CRUISER LJ70, LJ72, LJ73, LJ77 1/90-5/93 1.75″ and 70 Series Prado I, Land Cruiser II, LJ78/79, RJ70, RJ77, KZJ78 – 87-96 with stock rear weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – BLACK
- Sold as a Pair
(0 reviews) -
LJ70, LJ72, LJ73, LJ77 - 90-93 - Square Headlights
Dobinsons C59-288B 1.75″ Front Coil Springs | LAND CRUISER 70 Series Multiple Models – Pair Black
- Dobinsons C59-288 Front Coil Springs for TOYOTA LAND CRUISER LJ70, LJ72, LJ73, LJ77 1/90-5/93 W/SQUARE HEADLIGHTS and 70 Series Prado I, Land Cruiser II, LJ78/79, RJ77, KZJ78 – 87-96 1.75″ with bumper OR winch weight of 110lbs.
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – BLACK
- Sold as a Pair
(0 reviews) -
Dobinsons
Dobinsons 4° Caster Plate Kit | Land Cruiser 71 76 78 79 Series
- Suits 9/1999+ Toyota Land Cruiser 70 Series, 71,76,78, 79 with 3-5″ of lift
- For 3″ to 5″ lift heights, realigns front caster angle
- Uses a combination of caster bushings and plates to rotate the axle to correct caster and prevent contact with tie rod and radius arms
- E-coated steel with all hardware supplied, super heavy duty
- Simple bolt-on design with some grinding required
- WA59-585K Caster Plate Kit Instructions
- If you have less than 3″ of lift, use PB59-503K instead
(0 reviews) -
Dobinsons
Dobinsons IMS and MRA Adjuster Rings (Pair) for 66mm body
- Pair of anodized adjuster rings
- Suits 66mm (2.6″) body sizes only
- For Toyota Tundra, Sequoia, Land Cruiser, etc
- Some vehicles use smaller 56mm rings for the smaller 2.2″ body size
- Available in black or purple
(0 reviews) -
Sale!Dirt King FabricationFREE SHIPPING
within 48 US StatesDirt King 2.5 DCA Remote Resi Shocks | 4Runner FJ GX470 GX460
- Suits Toyota 4Runner 4th and 5th Gen 2003-2024, FJ Cruiser all years, Lexus GX470 and GX460
- Suits up to 1.5″ of lift
- Dual Compression Adjuster (DCA) is on the resi to fine tune the ride quality
- Dual Compression Adjusters with 10 adjustments for each knob
- Increased suspension travel
- Specific valving for each vehicle providing optimal ride comfort
- Aluminum body for cooler operation and corrosion resistance
- Remote reservoir equipped with dual compression adjusters allowing for high-speed and low-speed compression adjustments
- Less seal drag with the 3/4″ shafts compared to traditional 7/8″ shafts resulting in smoother operation
- Direct bolt-on replacement that uses factory shock mounting location
- Maxima custom oil blend. The proprietary light viscosity semi-synthetic oil blend is low friction and extremely resistant to high operating temperatures
- Completely rebuildable and serviceable. All tools and replacement parts can be purchased from Dirt King
- 2.5″ hard-anodized 6061 aluminum bodies
- Progressive valving
- Internal floating piston
- Induction-hardened 3/4″ shafts
- What’s Included:
- 2.5 DCA shocks with remote reservoirs Pair
- Shock shaft boots
- Reservoir mounts
- All necessary mounting hardware
- Installation instructions
- Installation video is down below
(4 reviews) -
Sale!Dirt King FabricationFREE SHIPPING
within 48 US StatesDirt King 2.5 Lexus GX470 DCA Remote Resi Coilovers
- Suits Lexus GX470 2003-2009 (all years)
- Will not suit KDSS models due to the front reservoir mounting position
- Comes preset to 2.0″ of lift
- Dual Compression Adjuster (DCA) is on the resi to fine tune the ride quality
- Dual Compression Adjusters with 10 adjustments for each knob
- Increased suspension travel
- Specific valving for each vehicle providing optimal ride comfort
- Aluminum body for cooler operation and corrosion resistance
- Remote reservoir equipped with dual compression adjusters allowing for high-speed and low-speed compression adjustments
- Less seal drag with the 3/4″ shafts compared to traditional 7/8″ shafts resulting in smoother operation
- Direct bolt-on replacement that uses factory shock mounting location
- Maxima custom oil blend. The proprietary light viscosity semi-synthetic oil blend is low friction and extremely resistant to high operating temperatures
- Cold wound, high-tensile alloy steel coil springs that retain consistent rate and ride height
- Completely rebuildable and serviceable. All tools and replacement parts can be purchased from Dirt King
- 2.5″ hard-anodized 6061 aluminum bodies
- Progressive valving
- Internal floating piston
- Induction-hardened 3/4″ shafts
- Provides up to 3” of lift | Must be paired with aftermarket UCA
- Note: We do not recommend lifting the vehicle more than 3″. Excessive preload will reduce the ride quality
- What’s Included:
- 2.5 DCA coilover shocks with remote reservoirs Pair
- Coils installed are 13” long, 700 LBF/in Spring Rate
- Sway bar relocation mounts with reservoir brackets
- Spanner wrench
- All necessary mounting hardware
- Installation instructions
- Installation video is down below
- Matching Rear Shocks
(4 reviews) -
80 Series Land Cruiser (1990-1997)
OME Land Cruiser Steering Damper for 60 70 80 series 1980-1997
- Suits Land Cruisers, Series 60, 61, 62, 70, 71, 73, 74, 75, and 80 series from 1980-1997 and Lexus LX450
- A new steering damper helps fight bump steer and makes driving offroad feel smoother from the driver’s seat
- If you don’t know how old your current steering damper is, then it’s time to replace it
- Nine Stage Coil Spring Valving For Optimum Performance
- A 15mm Piston Rod Provides Improved Strength
- Stone Guard Protects Piston Rod Against Stone Damage
- A 35mm Piston And Bore Allows Increased Oil Volume
- Twin Tube Design Protects Internal Components Against Stone Damage
- Multi-Lip Seal Prevents Oil Loss
- Original Stabilizer Mounts May Be Used Where Appropriate
(18 reviews) -
Rusty's Off RoadFREE SHIPPING
within 48 US StatesRusty’s Forged Adjustable Sway Bar Quick Disconnects | TJ LJ XJ MJ ZJ
- Suits the following Jeep models
- 1997-2006 TJ Wrangler
- 2003-2006 LJ Unlimited
- 1984-2001 XJ Cherokee
- 1986-1993 MJ Comanche
- 1993-1998 ZJ Grand Cherokee
- 1997-2006 TJ Wrangler
- Forged ends with Grade 8 and stainless steel hardware
- Adjustable from 2″ to 8.5″ of lift; no removal needed for adjustment
- Provides an easy way to connect / disconnect the front sway bar
- Includes bolt-on frame side retention brackets that allow you to hold the links up when sway bar links are disconnected.
- Hardware is included for all models, upgrade vehicles and never buy another set of disconnects!
- Built in Rainbow City, Alabama, USA
(7 reviews) - Suits the following Jeep models
-
Control Arms - JK WranglerFREE SHIPPING
within 48 US StatesRusty’s Adjustable Front Upper Control Arms w/Forged Rubber Ends | JK Wrangler
- Suits Jeep JK Wrangler 2007-2018 2 and 4 door models
- Comes with highly flexible rubber bushings installed on the both ends
- 1.5″ DOM Tubing
- Adjustable to fine-tune caster, pinion angle, and wheelbase
- Black powder coated
- Sold as a pair, left and right
- Made in the USA
(13 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesRusty’s Adjustable Front Lower Control Arms w/Forged Flex Ends – High Clearance | JL Wrangler Gladiator JT
- Suits Jeep JL Wrangler 2018+ 2 door and 4door models and Jeep Gladiator JT 2020+
- Comes with highly flexible rubber bushings installed on the axle end, and high flex joints on the frame end
- Massive 2 inch DOM Tubing
- Greasable flex joints on the frame end
- Adjustable to fine-tune caster, pinion angle, and wheelbase
- High Clearance feature
- Black powder coated
- Sold as a pair, left and right
- Included studs to hold the brake lines
- Made in the USA
(14 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesRusty’s Adjustable Front Lower Control Arms w/Forged Rubber Ends – High Clearance | JL Wrangler Gladiator JT
- Suits Jeep JL Wrangler 2018+ 2 door and 4door models and Jeep Gladiator JT 2020+
- Comes with highly flexible rubber bushings installed
- Rubber bushings on both ends give the best possible ride quality
- Adjustable to fine-tune caster, pinion angle, and wheelbase
- Massive 2 inch DOM Tubing
- Maintenance Free Rubber Bushings
- High Clearance feature
- Black powder coated
- Sold as a pair, left and right
- Included studs to hold the brake lines
- Made in the USA
(12 reviews) -
Bundera LJ70/LJ73 - 84-89 - Round Headlights
Dobinsons GS59-652K Rear Shocks Pair for Toyota Land Cruiser Bundera 70 Series 11/84-12/89
- For 11/84 to 12/89 Toyota 70 Series Bundera models, LJ70, LJ73, RJ70 and RJ73 with Round Headlights
- Rear Pair of Shocks for 1.75-2.5″ of lift
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Photo for illustration purposes
(12 reviews) -
Bundera LJ70/LJ73 - 84-89 - Round Headlights
Dobinsons GS45-114 Front Shocks Pair for Toyota Land Cruiser Bundera 70 Series 11/84-12/89
- For 11/84 to 12/89 Toyota 70 Series Bundera models, LJ70, LJ73, RJ70 and RJ73 with Round Headlights
- Front Pair of Shocks for 1.75-2.5″ of lift
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Photo for illustration purposes
(10 reviews) -
RCV AxlesFREE SHIPPING
within 48 US StatesRCV Ultimate 300M Rear Full Float 80 Series Rear Axles Set
- Suits Toyota Land Cruiser 80 Series 1990-1997 and Lexus LX450 with 9.5″ Full Float Rear Axle
- Ultimate 300M Toyota FJ80 Rear Full float axle set
- Designed to work with all differential types ( OE open carrier, Aftermarket lockers and OE Electric locker )
- Updated shaft design to aid in known OE Electric locker issues (with axle twist)
- Sold as a Set, left and right included
- Backed by the “No Questions Asked” limited lifetime warranty
- Warranty included with up to a 40″ tire
- 30 Spline Axle Ends
- Left inner axle length is 30.22″
- Right inner axle length is 37.76″
- Made in the USA
(9 reviews) -
Trail-Gear
HD Land Cruiser 80 Series Steering Upgrade Kit
- Suits 1990-1997 Toyota Land Cruiser 80 Series and Lexus LX450
- Kit includes all new Tie Rod and ends, Drag Link and ends and Steering damper
- (2) Left-hand threaded Heavy-Duty FJ80 Tie Rod Ends with Hardware
- (2) Right-hand threaded Heavy-Duty FJ80 Tie Rod End with Hardware
- (1) Tie Rod made from 1.25”OD x 0.25” Wall DOM Tubing
- (1) Drag Link made from 1.25”OD x 0.25” Wall DOM Tubing
- (1) Steering Stabilizer with 8” Stroke and Mounting Hardware
- Installation Instructions
(9 reviews) -
Trail-Gear
HD Land Cruiser 80 Series Tie Rod Kit
- Suits 1990-1997 Toyota Land Cruiser 80 Series and Lexus LX450
- Made from 1.25″ x .250″ wall DOM
- Includes FJ80 Heavy Duty Tie Rod Ends
- (1) Left-hand threaded Heavy-Duty FJ80 Tie Rod End with Hardware
- (1) Right-hand threaded Heavy-Duty FJ80 Tie Rod End with Hardware
- The rod ends are greased for life, sealed, and include the cotter pin and jam nut
- Tie Rod is precision tapped with left-hand threads marked
- Easy to adjust the total toe by rotating the tie rod once installed
- Installation Instructions
(9 reviews) -
Trail-Gear
Rock Defense 80 Series Rear Bumper
- Suits 1990-1997 Toyota Land Cruiser 80 Series and Lexus LX450
- Made out of 1020 DOM (1.75″ X .120″ wall)
- Includes D-ring mounts and rear top step plate
- Mounting plates made out of 3/8″ and 1/4″ laser cut steel
- Includes all new mounting hardware
- Can use factory tow package if you desire (sits below the bumper)
- Unpainted steel finish
- Made in the USA
- Ships by UPS Ground
- Installation Instructions
- When fitting on a Lexus LX450, the sides could get close or touch the plastic body cladding
(9 reviews) -
Trail-Gear
Rock Defense Low Profile 80 Series Front Bumper w/Stinger
- Suits 1990-1997 Toyota Land Cruiser 80 Series and Lexus LX450
- Includes welded on stinger bar as the top tube
- Made out of 1020 DOM (1.75″ X .120″ wall).
- Winch mount is made out of a .25″ CNC formed steel plate
- Mounting holes on the winch plate are drilled for most 5000-9500 model low-profile winches and smaller sized 9.0R Warn competition winches
- Bumpers also features a shackle receiver
- Unpainted steel finish
- Will not work with roller type fairlead, requires hawse type fairlead
- Weight is 94LBS
- Made in the USA
- Ships by UPS Ground
- Installation Instructions
- Also sold without a stinger top tube added as pictured in some of the photos
(9 reviews) -
Dirt King FabricationFREE SHIPPING
within 48 US StatesDirt King Performance Tacoma Spindles | 2005-2023 Tacoma
- Includes one set of spindles (Driver/Passenger)
- Suits 2WD and 4WD 6-Lug 2005-2023 Toyota Tacoma models
- Amount of Lift: 0”
- Track Width: Stock
- Maximum Backspacing: 5”
- Minimum Rim Size: 16”
- Includes left and right hand sides
- Made in USA
- Direct bolt on application
- CAD designed
- Professionally MIG welded
- Installation Instructions
- *Not compatible with the factory sway bar
(4 reviews) -
4Runner 5th Gen (2010-2024)FREE SHIPPING
within 48 US StatesDobinsons 3-Way Adjustable 3″ Long Travel 4Runner MRA Suspension Kit | 2010-24
- Suits Toyota 4Runner 5th Gen 4×4 from 2010 to 2024, without KDSS only
- Extended Travel front 3-Way Adjustable Remote Reservoir Struts and Long Travel Rear shocks along with all related components are listed on this page
- Maximize the suspension travel of your Toyota 4Runner for the most flex and travel you can get from bolt-on parts
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Lifting 3″ front and rear maintains factory rake
- Dobinsons have the largest selection of front and rear coils for 4Runners and in multiple colors
- Add up how much accessory weight you have on the front and then the rear, that’s your constant load
- Then choose the lift height from the coils that most closely matches the added weight
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Option to have the front struts preassembled prior to shipping to make installation easier at home
- You choose what options you want, nothing is provided if it is not listed once you have selected it
- Suspension Installation Video
- Lift heights are based on the standard 20″ front and 22″ rear, measured from the center of the hub up to the fender edge. Many vehicles come in at different heights from the factory based on trim levels and options
(5 reviews) -
Tacoma 4th Gen (2024+)
2024+ Tacoma Skid Plates Package from RCI
- For 2024+ Toyota Tacoma 4th Gen
- Includes engine, transmission and transfer-case skid plates.
- Protects front two cross-members, low hanging front differential, oil pan, transmission, second and third cross-members, exhaust cross pipe, and transfer-case
- Excellent addition or replacement of weak, lightweight OEM skid plates
- Simple installation and removal of all subsections for maintenance
- Built in oil drain hole allows easy access and ability to change oil without removal of plate
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Smooth, flat surface that easily slides over obstacles
- Black powder coat standard on steel skid plates for a rust resistant, durable and high quality finish
- Hardware included
- Direct bolt on addition to existing factory attachment points, no drilling required!
- Please note that some images show our A-Arm skid plates however they are not included with the skid plate package
- Verified to fit 4×4 TRD Offroad non-hybrid models. Suspected to fit other models, but not yet verified
- MADE IN LOVELAND, COLORADO, USA
(0 reviews) -
All Pro OffroadFREE SHIPPING
within 48 US StatesToyota Tacoma Overhead MOLLE Panel | 2016-2023
- Suits 2016-2023 Toyota Tacoma 4-Door models, short or long bed
- Adds an awesome mounting area against the ceiling above the rear seats
- You can mount gear to the bottom of the rack and also place small items between the rack and roof
- Compatible with molle accessories, molle pouches, and magnetic items.
- 14 GA Steel Construction
- Height down from roof is approx. 3″ (at rear dome light)
- Bolt-on installation, bolts where the factory grab handles were (not to be reinstalled)
- Approximate Molle mounting area is 9″ x 37″
- Finished in a durable black powder coat, ready to be used immediately!!
- Installation Instructions
- Made in the USA!!
(12 reviews) -
MRA Remote Resi 3-Way Adjustable Monotube
Dobinsons Replacement Rebound Adjuster Knob
- Single replacement rebound adjuster knob for front Dobinsons MRA struts
- Sold individually
- Works on the 3-Way Adjustable Remote Reservoir Monotube struts from Dobinsons (fronts only)
- Attaches to the top center stud after the coilover assembly has been installed into the vehicle (to prevent damage)
(7 reviews)
