Your cart is currently empty!
Dobinsons Spring & Suspension
Showing 631–660 of 1057 resultsSorted by popularity
-
Pickup (1986-1988)Dobinsons Rear Medium Load Leaf Springs Pair for Toyota Pickup 1979-88
- Toyota Pickup 4×4 from 1979 to 1988 models for 2″ of lift with up to 220LBS of rear weight.
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- When installing, compare the camber of the new springs with the old, as one side is taller than the other. Match them up to prevent vehicle lean
- Made for 4×4 models only!!! Springs must be mounted on top of axle, not below
(8 reviews) -
RecoveryDobinsons 4×4 Heavy Duty 18,000lb Greasable Snatch Block (Pulley)
- Dobinsons 4×4 Heavy Duty 18,000lb Greasable Snatch Block (Pulley)
- Includes branded carrying bag for protection
- Bright red color, less likely to be overlooked after a recovery is done
- Greasable pin in center hole for less resistance at the bearing
(10 reviews) -
LJ70, LJ72, LJ73, LJ77 - 90-93 - Square HeadlightsFREE SHIPPING
within 48 US StatesDobinsons 1.75″-2.5″ Lift Kit for Toyota Land Cruiser LJ70 LJ72 LJ73 LJ77 1/90-5/93 w/Square Headlights
- For 1/90 to 5/93 Toyota 70 Series models, LJ70 LJ72 LJ73 LJ77 with Square Headlights
- Also suits 1994+ RJ70, RJ73, KZJ 70/71/73 with Square Headlights
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to match OE fitment specs
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base kit includes front and rear coils and shocks
- Choose your coils and load carrying ability, anywhere from 1.75″ up to 2.5″ of Lift
(11 reviews) -
Amigo
Dobinsons Heavy Duty Torsion Bar Pair for Isuzu Amigo
- For Isuzu Amigo models – must measure before ordering
- Increased spring rate to improve handling and lift front end
- Powder coated black for a long lasting finish
- Replaces OE torsion bars without modification
- Torsion bars must be installed with 2/3 suspension down travel and 1/3 up travel to ensure a good ride
(3 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons MRA59-A685 3-Way Adjustable MRA Rear Shocks Pair | 80 Series 6″ Lift + Tundra
- Suits Toyota Land Cruiser 80 Series and Lexus LX450 1990-97, suitable for 6″ of lift, and 2022-2025+ Toyota Tundra with Long travel rear suspension
- 3-way adjustable valving – Adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 22mm / 7/8″ shaft diameter
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Piggyback Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- 714mm extended, 440mm compressed
- Installation Instructions of the MRA Shocks
- Bump stop extensions and longer brake lines must be run with these longer shocks
(19 reviews) -
ArmorETA is Spring 2025
Dobinsons 70 Series Winch Bumper | Land Cruiser 70 Series 1985-2007
- See below for full vehicle compatibility list
- Winch compatible
- Driving Light Mounts
- Heavy Duty Black Powder Coat Finish
- 3mm Thick Main Body, 4mm + 5mm Thick Bracketry, 1.6mm Bash Plates, 51mm top tubes
- Includes LED Turn Signals and all Required Hardware for Installation
- Separate Winch Cradle System, making installation faster
- Supplied Black, but can be painted by your paint shop
- Suits 10000-12000 LB Low Mount Winches
- We offer a large variety of Winches as well
- Note: LJ versions of the 70 series (LJ71, LJ73, etc.) may have different bolt patterns in the frame horn ends, so drilling and adapting to the holes of the bumper may be required
- Ships to the nearest freight terminal on a pallet for you to pick up, unless you add home delivery. We will be in touch with that delivery address
(3 reviews) -
Tacoma 1st Gen (1996-2004)
Dobinsons 1.5″ to 2.0″ Front Coils for Toyota Tacoma 1998 to 2004
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Coil springs are sold as a pair, powder coated teal
- C59-276 – 1.5″ with stock weight
- C59-134 – 1.5″ with bumper and winch
- C59-134 – 2.0″ with stock weight
(10 reviews) -
Tacoma 1st Gen (1996-2004)
Dobinsons 1.5-2.0″ Lift Kit Toyota Tacoma 1998-2004 with Blocks or AAL
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Includes 2 Front Struts, 2 Rear Shocks, 2 Front Coil Springs (a pair), Rear Spacer Blocks and U-Bolts
- Option now to use Wheeler’s add-a-leaf kit instead of blocks if you’d prefer
- It’s recommended that these coilovers to be run with aftermarket UCA’s for coilover clearance and correct travel
(9 reviews) -
Accessories
Dobinsons Single Drawer – Universal Mount – Large Size
- Measures 990mm long x 535mm wide x 275mm high, 80 LBS dry weight
- 1.6mm Zinc Plated Robust Steel Construction
- 12mm Heavy Duty Plywood Panels with Marine Carpet Covering
- 4 x Heavy Duty Stainless Steel Tie Down Points
- Aluminum Edging Protection, Heavy duty lockable latch
- Not compatible with 3rd row seat installed.
- Massive 150KG (330LB) Drawer Capacity on Heavy Duty Roller Bearing System
- Add optional Dobinsons Rear Drawer Table Top for better useability of the drawer
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address
- Regular Ground shipping isn’t available due to potential product damage
(3 reviews) -
40 Series Land Cruiser Late (1980-1984)
Dobinsons FJ40 Full 2.0″ Suspension Kit for Land Cruiser FJ40 BJ40 1980-1984
- For 1980+ Model FJ40’s with 35mm spring eye size front and rear
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
(10 reviews) -
Lighting
Dobinsons Wiring Kit for pair of Driving Lights
- Suitable for 2 LED light bars or a pair of Driving lights
- Includes switch, relay, and wiring harness, and zip ties.
- Light connections are waterproof, harness comes with 2 x male plug ends.
- Super easy and fast to install, plug and play design.
(0 reviews) -
Rear BumpersFREE SHIPPING
within 48 US StatesDobinsons GX460 Rear Bumper with Tire and Jerry Can Carrier
- Suits Lexus GX460 from 2010-2023
- Black Powder Coat
- Stainless Steel Latch and Hardware
- Complete Kit with Everything Included
- Includes double Jerry can carrier and single spare tire carrier
- All Lighting is 12V LED, requires splicing into original wiring harness (not plug and play)
- Does not include any hitch or towing ability. Designed to work around standard type tow hitch below rear cross member
- Adjustable offset tire carrier head, suitable up to a 35″ tire
- Instructions Page
- 2010-2013 requires slight notch above bumper to clear swing outs.
- 2014 and up requires heavy modification to the OEM bumper to clear swing outs.
- Video detailing fitment steps on a 2014+ Model – https://youtu.be/LJPSsFSor7k
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address
(14 reviews) -
KL Cherokee (2014-2022) (Trailhawk)
Dobinsons Rear Lifted Coil Options for 4X4 Jeep Cherokee KL 2014 to 2022 – Pair
- Trailhawk (AD2) lifts 1.0″ rear. Sport (AD1) models lift 2″ rear, depending on weight added
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Can be used with Dobinsons heavy duty Twin-tube Nitrogas Struts
- Sold as a Pair
- Select which rear coils suit the amount of weight you have on your vehicle
(17 reviews) -
WK2 Grand Cherokee (2011-2022)
Dobinsons Rear Coil Springs for Jeep Grand Cherokee WK2 2010-2022 1.75″ Lift – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Black
- Will Not Suit Vehicles Equipped with Quadra-Lift
- Sold in Pairs
(16 reviews) -
WK2 Grand Cherokee (2011-2022)
Dobinsons C29-127TB Rear Coil Springs Grand Cherokee WK2 2010-2022 1.75″ Lift Heavy Load – Pair
- Gives a 1.75″ lift with 330-440LBS constant weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Black
- Will Not Suit Vehicles Equipped with Quadra-Lift
- Sold in Pairs
(16 reviews) -
WK2 Grand Cherokee (2011-2022)
Dobinsons C29-122B Front Coil Springs for Jeep Grand Cherokee WK2 2010-2022 2.0″ Lift V6 or 1.5″ Lift V8 Gas – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Black
- Will Not Suit Vehicles Equipped with Quadra-Lift
- Sold in Pairs
(13 reviews) -
WK Grand Cherokee (2005-2010)
Dobinsons 1.75″ Lift Kit for Jeep Grand Cherokee WK from 2005-2010 and Commander 2006+
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Superior Designed Nitro Gas Shocks, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Includes 2 Front Struts, 2 Rear Shocks, and 4 Coil Springs for Medium Loads
(13 reviews) -
WK Grand Cherokee (2005-2010)
Dobinsons C29-029 Rear Coil Springs | Jeep Commander 2006-10 and Grand Cherokee WK 2005-10 (2″ Lift Heavy Load) – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(10 reviews) -
Rear BumpersFREE SHIPPING
within 48 US StatesDobinsons Rear Bumper for Toyota Land Cruiser 200 Series 2008-2021
- For Toyota Land Cruiser 200 Series from 2008 to 2021
- DOES NOT SUIT MODELS WITH LANE ASSIST
- Comes standard as Black Powder Coat (customer can have his local paint shop color-match as some photos show)
- Stainless Steel Latch and Hardware
- Complete Kit with Everything Included
- All Lighting is 12V LED, requires splicing into original wiring harness (not plug and play)
- Works with Factory Tow Hitch in OE position
- Adjustable offset tire carrier head, suitable up to a 35″ tire
- Instructions Page
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address
(13 reviews) -
Fridge/FreezersFREE SHIPPING
within 48 US StatesDobinsons 4×4 Full Extension Fridge Slide to suit 40 and 50L Fridges and Coolers
- Suits most 40/50L fridges and coolers on the market today. Measure before ordering.
- Strong folded steel construction, rattle free, smooth sliding.
- Powder coated black for a long-lasting finish. Locks when closed only
- Includes 4 x Fridge straps, or you can bolt the feet of the fridge to the slide itself, eliminating the straps
- 105KG weight rating, 29.0″ x 16.25″ x 1.5″ internal dimensions, 30.75″ x 18.75″ x 2.5″ external dimensions
(5 reviews) -
Accessories
Dobinsons Pickup Rear Drawers Kit with Fridge Slide 39x51x10″
- 1.6mm Zinc Plated Robust Steel Construction
- 12mm Heavy Duty Plywood Panels with Marine Carpet Covering
- Built in Heavy Duty Fridge Slide
- 8 x Heavy Duty Stainless Steel Tie Down Points
- Requires tonneau cover or canopy
- Universal Mount, measures 51.1 x 39.4 x 10 inches (L, W, H), requires drilling of truck bed, and custom fitting of side panels (if ordered)
- You can add a universal side wing panel kit down below, so that you can build out the edges of the drawers to the side of your bed
- Aluminum Edging Protection
- Heavy duty lockable latches
- Marine Carpet
- Massive 150KG (330LB) Drawer Capacity on Heavy Duty Roller Bearing System
- Ships to the nearest freight terminal for pickup, unless home delivery is option is added below. We will be in touch to let you know the terminal location
(12 reviews) -
RecoveryFREE SHIPPING
within 48 US StatesDobinsons 4×4 Deluxe Vehicle Recovery Kit, Full Winching Kit
- Complete kit Includes: 9m x 8,000kg Snatch Strap with Sliding Protective Sleeve, 3m x 12,000kg Tree Trunk Protector
- Heavy Duty Carry Bag, Heavy Duty Leather Gloves
- Waterproof Work Mat (63 x 55″), Compact Tri-Fold Shovel, Heavy Duty 18,000lb Greasable Snatch Block (Pulley)
- 2 x 3.25 Ton Bow Shackle, 2 x 4.75 Ton Bow Shackle, Digital Tire Gauge with Auto Shut Off (psi, bar, kpa & kg/cm3)
- Packed Bag Dimensions: 23 x 12 x 6″, 30 LBS
(10 reviews) -
250 Series Land Cruiser (2024-2025+)ETA is Spring 2025
Dobinsons C59-883V Rear Coil Springs Pair
- Lifts the Rear of a 2024+ Toyota Land Cruiser 250 series and Lexus GX550 10mm (0.4″)
- This Variable Rate Coil Allows Less Height Change and Provides a Firmer Ride When Loaded
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(0 reviews)$270.00 Select options This product has multiple variants. The options may be chosen on the product page -
250 Series Land Cruiser (2024-2025+)ETA is Spring 2025
Dobinsons C59-882 Front Coil Springs Pair
- Lifts the front of a 2024+ Toyota Land Cruiser 250 series 2.0″ with stock weight with the 2.4L or 2.7L gas engine.
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(0 reviews)$270.00 Select options This product has multiple variants. The options may be chosen on the product page -
Tundra 3rd Gen (2022-2025+)FREE SHIPPING
within 48 US StatesDobinsons MRA59-A885 2.6″ 3-Way Adjustable Rear Shocks Pair | Long Travel
- Suits 2022-2025+ Toyota Tundra Rear with 3.0″ of Lift in a long travel setup
- 3-way adjustable valving – Adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 22mm / 7/8″ shaft diameter
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Piggyback Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- 714mm extended, 440mm compressed
- Installation Instructions of the MRA Shocks
(0 reviews) -
250 Series Land Cruiser (2024-2025+)FREE SHIPPING
within 48 US StatesDobinsons IMS59-60660 2.6″ IFP Front Struts Pair
- Suits Toyota Land Cruiser 250 Series 2024+ and Lexus GX550
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- 22mm / 7/8″ shaft diameter on front struts
- Full 2 year limited warranty, no set rebuild time period
- Standard coil seat height should be set to 237mm (9.3″) from the center of the lower hole to the base notch where the coil sits
- SOLD IN PAIRS
- Shocks do not suit any models that have factory electronic adjustable Shock Absorbers
- Photos for illustration purposes only
(0 reviews) -
LJ70, LJ72, LJ73, LJ77 - 90-93 - Square Headlights
Dobinsons C59-289B 1.75″ Rear Coil Springs | LAND CRUISER 70 Series Multiple Models – Pair Black
- Dobinsons C59-289 Rear Coil Springs for TOYOTA LAND CRUISER LJ70, LJ72, LJ73, LJ77 1/90-5/93 1.75″ and 70 Series Prado I, Land Cruiser II, LJ78/79, RJ70, RJ77, KZJ78 – 87-96 with stock rear weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – BLACK
- Sold as a Pair
(0 reviews) -
LJ70, LJ72, LJ73, LJ77 - 90-93 - Square Headlights
Dobinsons C59-288B 1.75″ Front Coil Springs | LAND CRUISER 70 Series Multiple Models – Pair Black
- Dobinsons C59-288 Front Coil Springs for TOYOTA LAND CRUISER LJ70, LJ72, LJ73, LJ77 1/90-5/93 W/SQUARE HEADLIGHTS and 70 Series Prado I, Land Cruiser II, LJ78/79, RJ77, KZJ78 – 87-96 1.75″ with bumper OR winch weight of 110lbs.
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – BLACK
- Sold as a Pair
(0 reviews) -
Dobinsons
Dobinsons 4° Caster Plate Kit | Land Cruiser 71 76 78 79 Series
- Suits 9/1999+ Toyota Land Cruiser 70 Series, 71,76,78, 79 with 3-5″ of lift
- For 3″ to 5″ lift heights, realigns front caster angle
- Uses a combination of caster bushings and plates to rotate the axle to correct caster and prevent contact with tie rod and radius arms
- E-coated steel with all hardware supplied, super heavy duty
- Simple bolt-on design with some grinding required
- WA59-585K Caster Plate Kit Instructions
- If you have less than 3″ of lift, use PB59-503K instead
(0 reviews) -
Dobinsons
Dobinsons IMS and MRA Adjuster Rings (Pair) for 66mm body
- Pair of anodized adjuster rings
- Suits 66mm (2.6″) body sizes only
- For Toyota Tundra, Sequoia, Land Cruiser, etc
- Some vehicles use smaller 56mm rings for the smaller 2.2″ body size
- Available in black or purple
(0 reviews)
