Your cart is currently empty!
Shop
Showing 421–450 of 2181 resultsSorted by popularity
-
80 Series Land Cruiser (1990-1997)Dobinsons 80 Series Stock Height Restoration Suspension Kit 1990-1997 (inc all shock options)
- Suits Land Cruiser 80 Series and Lexus LX450
- Restore your vehicle back to the original ride height, and bring the ride quality way up at the same time with the Dobinsons 80 Series Stock Height Suspension Kit
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to match OE spec and height
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Includes 2 Front Shocks, 2 Rear Shocks, and 4 Coil Springs. Add on additional parts if desired
(18 reviews) -
Rear Drawers
Dobinsons Rear Drawer Divider – Suits Narrow Sizes
- 1.6mm Zinc Plated Robust Steel Construction
- Sold individually
- Marine Carpet Covering
- Easy installation with 4 pre drilled holes
- Suits RD80-1001 and RD80-1004 model drawer sizes
(3 reviews) -
Rear Drawers
Dobinsons Rear Drawer Table Top – 18.75″ Wide
- 1.5mm Stainless Steel Construction
- 24.75″ x 18.75″ added work space
- Laser cut towel hangers and bottle opener
- Works with drawer open or closed, inside or out!
- Drawer system not included
- Suits RD80-1000 and RD80-1003 – each drawer is 18.75″ Wide
- Suits drawers that go into Land Cruisers
(3 reviews) -
200 Series Land Cruiser (2008-2021)
Dobinsons Adjustable Rear Lower Control Arms Pair | WA59-547K
- Suits all 200 Series Land Cruisers from 2008-2021, 300 Series Land Cruiser, 2023+ Toyota Sequoia, 2024+ Land Cruiser 250 Series, Lexus GX550
- Comes with high quality rubber OE style bushings installed for maximum flexibility, and zero noise
- Made from HSLA (High Strength Low Alloy) Steel
- 40mm OD and 6mm wall thickness with support brace
- Oversized adjusters and rod thickness for maximum strength and durability with double-nut locking feature
- Zinc plated, then E-coated black, for the ultimate finish and protection
- Sold as a pair
(4 reviews) -
Replacement Bushings
Dobinsons Upper Shock Bushing Kit – For -701, -705, -575
- Dobinsons replacement upper shock bushing kit with washers
- Suits a variety of Dobinsons shocks, part numbers ending in -701, -705, -575
- Full list of part numbers this fits is below
- This is for 2 upper bushings and washers only for 1 strut or shock
- High quality natural rubber bushing
- Photo for illustration purposes of the bushing type
(0 reviews) -
Full Suspension Kits - 4th Gen 4runnerFREE SHIPPING
within 48 US StatesDobinsons 1-3.5″ 3-Way Adjustable MRR Coilovers | Toyota 4Runner 2003-2009
- Suits 2003-2009 Toyota 4Runner 4th Gen 4×4 Models
- Looking for a quick and easy way to lift your 4Runner? This is your answer
- A 4×2 model lifts 1″ extra with the 4×4 lift heights
- Select your desired lift height and spring rate – we’ll take care of the rest!!
- The terms MRA and MRR are used interchangeably. The A stands for Adjustable in the part number or SKU
- Dobinsons MRR are height adjustable by a fully threaded body
- The Dobinsons MRR Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- Extended Travel – 567mm extended, 417mm compressed
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
- Resi installation instructions
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle. Adding 2.5″ or more lift, new UCA’s should be added for proper articulation and correct wheel alignment
- Link to Matching rear shocks
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
(8 reviews) -
Full Suspension Kits - 5th Gen 4RunnerFREE SHIPPING
within 48 US StatesDobinsons 1-2.5″ Pre-Assembled IMS Coilovers for Toyota 4Runner 5th Gen 2010-2024
- Suits 2010-2024 Toyota 4Runner 5th Gen 4×4 Models
- Looking for a quick and easy way to lift your 4Runner? This is your answer
- A 4×2 model lifts 1″ extra with the 4×4 lift heights
- Select your desired lift height and spring rate – we’ll take care of the rest!!
- Dobinsons IMS are height adjustable by a fully threaded body
- The Dobinsons IMS Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
- Fully rebuildable and re-valvable
- 560mm extended, 420mm compressed
- SOLD IN PAIRS – READY TO BOLT IN
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Photos for illustration purposes
- Instructions for setting coil seat height
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle. Adding 2.5″ or more lift, new UCA’s should be added for proper articulation and correct wheel alignment
- Click to see Matching rear shocks
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
- Lift heights are based on the standard 20″ front and 22″ rear, measured from the center of the hub up to the fender edge. Many vehicles come in at different heights from the factory based on trim levels and options
(7 reviews) -
AwningsFREE SHIPPING
within 48 US StatesHD Nomadic Car-Side Shower Room
- Use this for a shower, use it for changing clothes, a quick change room, use it for a portable toilet enclosure, or whatever else you can think of!!
- Hide inside it and scare the crap out of your camping buddies when you’re out in the middle of nowhere!!
- Manufactured from a high performance 420D Oxford Rip Stop fabric and aluminum folding arms enclosed in rugged 1000D waterproof PVC integrated storage bag
- Mounts to roof rack with supplied L brackets and mounting stainless steel hardware
- This does NOT have a roof/ceiling, it is open at the top
- Quick and easy setup, simply unzip, fold out and stake down
- Curtain hems weighted with structural poles to keep shape – 42 Inch (L) X 42 Inch (W) X 76 Inch (H) with adjustable straps to accommodate various vehicle heights
- The front curtain wall features a heavy duty dual sided zip which allows easy access in and out of the Nomadic Car Side Shower
- Velcro strap to secure a shower head and two (2) internal pouches
- Download Instructions
(8 reviews) -
LJ70, LJ72, LJ73, LJ77 - 90-93 - Square Headlights
Dobinsons C59-289 1.75″ Rear Coil Springs | LAND CRUISER 70 Series Multiple Models – Pair Teal
- Dobinsons C59-289 Rear Coil Springs for TOYOTA LAND CRUISER LJ70, LJ72, LJ73, LJ77 1/90-5/93 1.75″ and 70 Series Prado I, Land Cruiser II, LJ78/79, RJ70, RJ77, KZJ78 – 87-96 with stock rear weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold as a Pair
(9 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons IMS59-60684 Front 2.6″ IFP Shocks Pair | Toyota Land Cruiser 80 Series (6″ lift)
- Suits Toyota Land Cruiser 80 Series 1990-97 and Lexus LX450 with 6″ of Lift or for Long Travel use
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
- 728mm extended, 432mm compressed
(14 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons IMS59-60685 Rear 2.6″ IFP Shocks Pair | Toyota 80 Series (6″ lift) + Tundra
- Suits Toyota Land Cruiser 80 Series and Lexus LX450 1990-97 with 6″ of Lift or for Long Travel use and 2022-2025+ Toyota Tundra for Long Travel
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
- 730mm extended, 446mm compressed
- Bump stop extensions and longer brake lines must be run with these longer shocks
- Sold in Pairs
(12 reviews) -
Skid PlatesFREE SHIPPING
within 48 US StatesARB 5421100 Skid Plate Kit | Toyota 4Runner 4th Gen 2003-2009
- Suits all Toyota 4Runner 4th Gen models from 2003 to 2009. Also fits 5th Gen 4runners without KDSS
- You must check to make sure you don’t have KDSS before ordering this kit
- 3mm pressed and folded sheet steel adds more strength than a standard folded sheet.
- Laser cut sheet steel.
- Zinc plated and powder coated with a silver textured finish.
- Recessed mounting bolts are protected and easy to remove for vehicle servicing.
- The Under Vehicle Protection will fit with or without an ARB front bumper. Fitment has not been confirmed with other aftermarket bumper designs
- Comprises 4 panels: Front Panel (Protects power steering, engine sump, sway bar), Diff Panel (Protects front diff mounts, engine sump), Transmission (Protects transmission and transmission controls) and Transfer Case (Protects transfer case)
- See more details below as well as product video
(8 reviews) -
Hats Shirts Patches
Exit Offroad Flexfit 6277 Adult Wooly 6-Panel Hat
- Classic Exit Offroad embroidered logo on front left
- Baseball cap with wool-like fabric
- Hard buckram. Structured
- Closed back. Stretch fitted
- Silver undervisor, 8-row stitching on visor
- Available in 3 different sizes. Refer to attached size chart before ordering
- Super comfortable fitted hat – now with XL/XXL size for big heads!!!
(0 reviews) -
Dobinsons
Dobinsons SP59-023 Greasable Pin Kit (Pair) | Land Cruiser 70 Series
- Suits all 70 Series models with leaf spring rear ends, including 70, 73, 74, 75, 77
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Purchase includes 1 pair (2 pieces) of greasable pins for the fixed end of a leaf spring
- Photo for reference only, actual product may appear different
(5 reviews) -
KL Cherokee (2014-2022) (Trailhawk)
Dobinsons C29-151 Rear Lifted Coils for 4X4 Jeep Cherokee KL 2014 to 2022 – Pair
- Trailhawk (AD2) lifts 1.0″ rear. Sport (AD1) models lift 2″ rear
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Can be used with Dobinsons heavy duty Twin-tube Nitrogas Struts
- Sold as a pair
- Powder coated in a long lasting black color
(5 reviews) -
200 Series Land Cruiser (2008-2021)
Dobinsons C59-547 2″ VHD Land Cruiser 200 Series Rear Coils – Pair
- C59-547 – 2″ lift with 880LBS constant rear weight, 2.5″ with 550LBS
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 520/490mm free height, 248LBF/IN Spring Rate
- Sold as a Pair – marked side specific for installation
(3 reviews)$350.00 Select options This product has multiple variants. The options may be chosen on the product page -
Dobinsons
Dobinsons C45-423 Rear Coil Springs for Pathfinder R52 & R53 – Pair
- These are for the independent rear suspension Pathfinder R52 models 2013-2020 and R53 2021+
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- Photo is not of actual coil springs for this vehicle
- C45-423 Rear coils will lift 30mm over original height with the added weight of 300-500LBS of constant weight, (for example, towing a heavy trailer)
(3 reviews) -
Sale!4Runner 5th Gen (2010-2024)
RCI Rock Sliders | 5th Gen 4Runner 2010-2024
- Protects rocker panels and doors
- Our sliders utilize a 2″ square main tube which is far stronger than 1.75″ round tube used by competitors
- 1.75″ DOM outer rails are now standard for uncompromised strength
- Heavy duty 1/4″ gussets on all legs
- 45 degree mitered main tube ends provide a superior aesthetic appearance as well as more functional design that won’t hang up
- Full length 1/4″ frame plate provides up to 15 mounting points on each side of the vehicle, guaranteeing a slider as strong or stronger than anything else on the market
- Easily capable of supporting the entire side of truck for lifting with hi-lift, or sliding on rocks
- Standard with 20 degree upward angle, creates a low profile with maximum ground clearance
- Direct bolt on addition to existing mounting locations, no drilling required
- Easy install with only basic hand tools
- Grade 8 hardware and installation instructions provided
- Standard with our signature low profile rear kickout
- Made to order from your selections below
- Made in USA
(3 reviews) -
Accessories
Dobinsons GX460 Drawers for Lexus GX460 2010-2023
- Suits 2010-2023 Lexus GX460 with rear Air Conditioning
- 1.6mm Zinc Plated Robust Steel Construction
- 12mm Heavy Duty Plywood Panels with Marine Carpet Covering
- Built-in Heavy-Duty Fridge Slide
- 8 x Heavy Duty Stainless Steel Tie Down Points
- Comprehensive optional outer wing trim kit to provide a factory fit. Installation of drawers may REQUIRE drilling and bolting through floor if suitable holes are not in the floor already
- Aluminum Edging Protection
- Heavy duty lockable latches.
- Sliding portion is not changeable from one side to the other.
- Not compatible with 3rd row seat installed.
- Massive 150KG (330LB) Drawer Capacity on Heavy Duty Roller Bearing System
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address
(3 reviews) -
40 Series Land Cruiser Early (1960-1979)
Dobinsons 1.75″ Suspension Kit | Toyota Land Cruiser FJ40 BJ40 1960-1979
- Suits Land Cruiser 40 series 1960 to 1979 models with 25mm eye leaf springs
- Choose from Twin Tube Nitrogas shocks or IMS Monotube shocks down below
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Front and rear leaf springs have a military wrap on the fixed end of each spring
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- Photos are for illustration purposes
(9 reviews) -
Sequoia 1st Gen (2001-2007)
Dobinsons 1.75-2.5″ Sequoia Suspension Kit for 2001-2007 4.7L V8
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base Kit Includes 2 Front Struts, 2 Rear Shocks, and 4 Coil Springs
- Additional parts can be added from the drop down menus
- All 3 different Dobinsons shock types are available to choose from below
(9 reviews) -
Dobinsons
Dobinsons Coil Spring Silencer
- For +-17mm Wire Diameter Coil Springs
- Measure the thickness of the wire on your coil springs before ordering
- Offered in 2 different sizes for different inner diameter (ID) coil springs
- Suits 102-124mm (4.0″ – 4.88″) ID Coil Springs
- Suits 130mm -146mm (5.1″ – 5.75″) ID Coil Springs
- To be installed in the softer section of a variable rate coil spring. (The part of the coil spring that collapses first, up top)
- Made from High-Durometer Rubber
- Has adhesive inside to stay in place
- Sold INDIVIDUALLY, order 2 for 2 coil springs
(0 reviews)$15.00 Select options This product has multiple variants. The options may be chosen on the product page -
Tundra 1st Gen (2000-2006)FREE SHIPPING
within 48 US StatesPerformance Rear Brake Line for Tundra 99-06 (BLACK)
- American made D.O.T. Certified extruded teflon core, stainless steel braided and coated with a PVC cover
- Increase your brake pedal feel with stainless brake lines to replace the factory rubber brake lines
- Works with 0-2″ of lift, 21.5″ long
- Suits the following vehicle: Toyota Tundra 1999-2006
- Sold as 1 piece with new retaining clip
- Photo for illustration purposes only
- This item is BLACK in color
(26 reviews) -
All Pro OffroadFREE SHIPPING
within 48 US StatesAll Pro Complete CV Boot Kit | Toyota 4Runner 1996-2002
- Complete CV boot replacement kit – Suits 1996-2002 3rd Gen Toyota 4Runner 4×4
- Includes inner and outer OEM-Style CV boots and all related clamps.
- Qty 2 – OEM-Style Neoprene Outer CV Boots
- Qty 2 – OEM-Style Neoprene Inner CV Boots
- Qty 4 – CV Grease Packets
- Qty 8 – Ear-Type CV-Joint Clamps
- Qty 2 – Axle C-Clips and Snap Rings
- Qty 1 – CV Clamp Crimp Pliers
(25 reviews) -
Rear Drawers
Dobinsons Rear Drawer Divider – Suits Wide Sizes
- 1.6mm Zinc Plated Robust Steel Construction
- Sold individually
- Marine Carpet Covering
- Easy installation with 4 pre drilled holes
- Suits RD80-1000 and RD80-1003 model drawer sizes
(3 reviews) -
Upper Control ArmsFREE SHIPPING
within 48 US StatesIcon Tubular UCA DJ Pro Pair for 22-25 Tundra + 23-25 Sequoia
- Suits 2022-2025+ Tundra and 2023-2025+ Sequoia 4×4 Models with 1.75+ of lift over a base model
- Built in added caster for better handling on lifted vehicles
- Delta Joint PRO allows maximum articulation without binding
- Delta Joint PRO is 100% serviceable and rebuildable
- Serviceable dual stage pivot bushings
- CNC machined housings for bushings and Delta Joint PRO
- 1026 DOM tube construction with black powder coat finish
- Includes billet dust caps for Delta Joint PRO
- Installation Guide
- Warranty Info
(11 reviews) -
100 Series Land Cruiser IFS (1998-2007)
Dobinsons Tubular UCA Pair | Land Cruiser 100 LX470 1998-2007 – No Ball Joints
- For Toyota Land Cruiser 100 Series and Lexus LX470 1998-2007 models
- This purchase does not include any ball joints. Use OEM or aftermarket OE sized upper ball joints
- Not compatible with AHC, it does not have the bracket in place
- Includes both left and right hand side arms, OE style rubber frame bushings installed in the arms, all joint caps, and washers
- Has 3 degrees of caster built in, no adjustability or settings required
- Has more clearance around the ball joint than factory UCA’s for better tire clearance
- Made from HSLA (High Strength Low Alloy) Steel
- 5mm (0.2″) wall thickness
- Powder coated black
- Product Video
- Also available with ball joints installed, here
- Replacement Ball Joints can be ordered here
(8 reviews) -
Coil Springs - 4th Gen 4Runner
Dobinsons Front Coil Spring Options for V8 Toyota 4th Gen 4Runner 2003-2009 – Pair
- THIS IS FOR V8 ENGINE 4X4 MODELS ONLY – V6 models use a different set of specs
- Choose what coil suits your vehicle and needs the best
- Sold as a Pair
- All specs are listed for 4×4 models. 2WD models lift about 1″ more due to less weight
- Stock weight = all stock front end | 110 LBS is usually a slim line bumper and winch with synthetic line | 220 LBS is usually a full width steel bumper with a winch and synthetic or steel line | 300+ LBS is usually a full with steel bumper, winch, dual batteries, and skid plates
- C59-238 – Stock front end, low height 1/4-1/2″
- C59-296 – Stock front end, 1.0″ lift
- C59-300 – Stock front end, 1.5″ lift
- C59-302 – Stock Weight – 2.0″ | with 110-150lbs – 1.5″
- C59-314 – Stock Weight – 2.5″ | with 110-220lbs – 2.0″
- C59-350 – With 220-300lbs – 1.5″ | Heavy rate coils
- C59-352 – With 110-220lbs – 2.0″ | Heavy rate coils
- C59-354 – 2.5″ with 110-150lbs | with 220-300lbs – 2.0″ | Heavy rate coils
(12 reviews) -
Bump Stops + SpacersFREE SHIPPING
within 48 US StatesTimbren Active Off Road Rear Bump Stops | Tundra Sequoia LC250 Tacoma GX
- Suits the Rear of 2022-2025+ Toyota Tundra, 2023-2025+ Sequoia, 2024-2025+ Land Cruiser 250, Lexus GX550, 2024-2025+ Tacoma with coil springs
- Active Off-Road Bumpstops provide off-road enthusiasts greater control over their vehicles’ suspension travel. Using progressive-rate springs means that instead of a hard stop at the end of axle travel the axle energy will be absorbed when bottoming-out producing smooth, predictable, and quiet axle engagement and disengagement.
- Unlike OEM bump stops, Active Off-Road Bumpstops are made from natural rubber. Just like our Timbren SES line, Active Off-Road Bumpstops carry a lifetime warranty and a satisfaction guarantee.
- ABSTORTNDR replaces the rear OEM bump stops on the 2022 Toyota Tundra. Upgrade to Active Off-road Bumpstops and experience the difference.
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation
- Satisfaction Guarantee
- Lifetime Warranty
- Installation Instructions
(15 reviews) -
Full Suspension Kits - Tundra 3rd GenFREE SHIPPING
within 48 US StatesDobinsons 3-Way Adjustable MRR Tundra Lift Kit | 2022-2025 (2-3″)
- Dobinsons MRR suspension kit for your 2022-2025+ Tundra
- Specs are for the non-Hybrid model
- Hybrid Models lift 1-1.5″ less lift than listed here
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Remote Reservoir 3-way adjustable Shocks, Superior Design, thicker walls, longer travel
- Adjust high and low speed compression (HSC and LSC) and rebound adjustment front and rear
- Massive 66mm (2.6″) body size with 60mm pistons front and rear
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen in the external reservoir
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- Choose your desired suspension parts to build the kit best suited to your weight and desired lift height
- Front Resi Installation
- Installation Note: Transfer over the rear OEM coil isolators from the stock coils to these to prevent coil slap
- If doing a 2.5″ lift or higher in the front, a diff-drop kit or longer TRD CV-axles are REQUIRED, failure to complete these requirements could cause OE CV-axle failure
- TRD axle shafts: PT362-3432B and PT362-3431B
- **Not compatible with factory rear airbag suspension
- Standard Coil seat height for MRA59-A446 should be set at 175mm (6.87″) from the strut bushing eye to top of coil isolator
(7 reviews)
