Dobinsons

Showing 481–510 of 1040 resultsSorted by popularity

Full Suspension Kits - FJC Early
FREE SHIPPING
within 48 US States
Dobinsons 1.5-3.5″ 3-Way Adjustable MRA FJ Cruiser Coilovers for 2006-2009
- Suits Toyota FJ Cruiser 2006-2009
- Looking for a quick and easy way to lift your FJ Cruiser? This is your answer
- Select your desired lift height and spring rate – we’ll take care of the rest!!
- Dobinsons MRA are height adjustable by a fully threaded body
- The Dobinsons MRA Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- Extended Travel – 567mm extended, 417mm compressed
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
- Resi installation instructions
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle. Adding 2.5″ or more lift, new UCA’s should be added for proper articulation and correct wheel alignment
- Link to Matching rear shocks
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
Rated 5.00 out of 5
(8 reviews)
$1,795.00 Select options
Gladiator JT (2020-2024+)
Dobinsons C29-249VB Rear 3.0″ Lift Coils for Jeep Gladiator – Extra Heavy Load – Pair
- Suits 2020+ Jeep Gladiator JT Pickup Truck
- Lifts 3.0″ with 880-1210LBS rear end constant weight (bumper, camper, etc)
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Black
- Sold as a Pair
Rated 5.00 out of 5
(6 reviews)
$305.00 Add to cart
On Backorder
Ram 1500 2019+
Dobinsons C16-053V Rear 2.0″ Coils with 330-550LB Load | Dodge Ram 1500 4×4 2019-2022 – Pair
- Dobinsons C16-053V Rear 2.0″ Lift Coils with 330-550LB Load | Dodge Ram 1500 4×4 2019-2022
- Variable rate rear coils for the best ride comfort and load handling
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold as a Pair
Rated 5.00 out of 5
(7 reviews)
$270.00 Add to cart
Ram 1500 2019+
FREE SHIPPING
within 48 US States
Dobinsons IMS 2.6″ Front Struts Pair | Dodge Ram 1500 2019-2022
- Pair of IMS front struts for Dodge Ram 1500 2019-2022 Models
- SOLD IN PAIRS
- Fully rebuildable and re-valvable
- Adjustable height, multiple clip settings on lower coil seat
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
Rated 5.00 out of 5
(8 reviews)
$720.00 Add to cart
On Backorder
Pickup (1988-1995)
Dobinsons HIL-034-R Medium Load Leaf Springs Pair for Toyota Pickup 1988-95
- Dobinsons HIL-034-R pair of leaf springs for the rear of the Toyota Pickups (USA models) from 1988 to 1995 and they give 45mm (1.75″) of lift
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Sold as a pair, springs only
- Order Suitable Bushing Kit and U-bolt Kit
Rated 5.00 out of 5
(2 reviews)
$470.00 Add to cart
FJ/BJ70, BJ71, FJ/BJ73, FJ/BJ74
Dobinsons HJ75-8L-F Front Heavy Load Leaf Springs Pair
- Front Leaf Springs for the Toyota FJ/BJ70, BJ71, FJ/BJ73, FJ/BJ74 4×4 from 1985 to 1989 and 1990-1999 75 Series – FZJ75, HZJ75
- 45-50mm front lift with 110-220LBS of constant weight
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Sold as a pair
Rated 5.00 out of 5
(2 reviews)
$470.00 Add to cart
200 Series Land Cruiser (2008-2021)
Dobinsons C59-538 1.0″ Land Cruiser 200 Series Front Coils – Pair
- Dobinsons C59-538 1.0″ (25mm) Landcruiser 200 Series Front Coils
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Teal Finish.
- Sold as a Pair
Rated 5.00 out of 5
(6 reviews)
$270.00 Add to cart
Dobinsons
Dobinsons Extended Jeep JL JT Front Sway Bar Link Kit | Gladiator JT Wrangler JL
- Fits Jeep Gladiator JT 2020+ and Jeep Wrangler JL 2018+ 2-door and 4-door
- Recommended for a Jeep with 2″ of lift
- Required for a Jeep with 3″ of lift
- Heavy Duty design with high quality ball joint ends for long life
- Fits and installs the same as OEM, but with added length so that the stock sway bar still functions normally at a lifted height without reducing wheel travel
- Sold as a pair, enough for 1 vehicle
Rated 5.00 out of 5
(6 reviews)
$70.00 Add to cart
Dobinsons
Dobinsons GS21-463 Front Shocks Pair | Isuzu Trooper Amigo Honda Passport
- Suits Isuzu Trooper 1992 to 2002 models, Honda Passport 2/1999 to 2002 models, 1995-2002 Isuzu Amigo
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls
- Japanese NOK Multi-Lip seals
- Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- 398mm extended, 258mm compressed
Rated 5.00 out of 5
(7 reviews)
$310.00 Add to cart
Montero NM NP NS NT 2000+
FREE SHIPPING
within 48 US States
Dobinsons IMS43-50783 Monotube IFP Front Struts Pair for Mitsubishi Montero 2000+
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Standard coil seat height is 241mm from center of lower bushing to coil seat notch
- 473mm extended, 330mm compressed
- Instructions for setting coil seat height
Rated 5.00 out of 5
(8 reviews)
$650.00 Add to cart
Hats Shirts Patches
Dobinsons Snap Back Richardson 112 Trucker Hat
- Richardson original 112 Trucker hat
- Dobinsons PVC logo emblem up front
- Embroidered IMS and MRR logos on the sides
- Snap back adjustment, one size fits most
- Available in black or grey
(0 reviews)
$35.00 Select options
Suspension
FREE SHIPPING
within 48 US States
Dobinsons 1.5″ to 3.5″ IMS Lift Kit | FJ Cruiser 2010-2017
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base Kit Includes 2 Front IMS Struts, 2 Rear IMS Shocks, and 4 Coil Springs
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 Year Replacement Warranty
- Front IMS height adjustment instructions
Rated 5.00 out of 5
(13 reviews)
From $1,770.00 Select options
Pickup (1988-1995)
Dobinsons Toyota Pickup Hilux 1.75″ Suspension Kit for 1988-1995 models
- Suits Toyota Pickup 1988-1995 USA models and 1991-2005 Toyota Hilux LN107 SR5, LN108, RN106
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Front torsion bars are optional, you can add new ones if you don’t want to use your originals
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Includes torsion bars, front and rear shocks, steering damper, shackles, pins, u-bolts, leaf springs and bushings
- Choose which specific parts you’d like from the menu below
Rated 5.00 out of 5
(13 reviews)
From $1,590.00 Select options
80 Series Land Cruiser (1990-1997)
Dobinsons 6″ Lift Kit Builder | Toyota Land Cruiser 80 Series (inc All Shock Options)
- Suits Land Cruiser 80 Series and Lexus LX450
- Kit requires additional parts for this lift height, see below
- **Kit photo shows with every additional option purchased**
- Coils are specifically suited to match lift height and added weight
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- Select Dobinsons Twin Tube, IMS or 3-way Adjustable MRA shocks from the list
- 3-way Adjustable MRA shocks you can adjust high and low speed compression (HSC and LSC) and rebound adjustment front and rear
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Kit includes front and rear shocks and coils, steering damper, 5 degree castor kit, Front and Rear adjustable panhard rods for left hand drive, front sway bar extensions and rear proportioning valve extension – whatever you add to your cart. Nothing is included if you don’t select it
- Be sure to read each sub section clearly so you know what all is required to add this much lift to your vehicle.
- A double-cardan front drive shaft is required for any lift of 4″ or more on this vehicle – we don’t sell them
Rated 5.00 out of 5
(13 reviews)
From $2,510.00 Select options
WK2 Grand Cherokee (2011-2022)
FREE SHIPPING
within 48 US States
Dobinsons IMS Lift Kit for Jeep Grand Cherokee WK2 for 2011-2022
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Will Not Suit Vehicles Equipped with Quadra-Lift
- Superior Designed IMS (Internal reservoir Monotube Shocks) with Internal Floating Piston – huge 56mm bore size for maximum dampening control
- Adjustable height front struts to fine tune lift height and leveling if needed
- 50mm hi-flow CNC 6061 Billet alloy piston
- Japanese NOK Multi-Lip seals
- Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Includes 2 Front Struts, 2 Rear Shocks, and 4 Coil Springs
- Note: Not all coil options are black. Some may be supplied in teal
- To check if your WK2 has Nivomat rear shocks measure the original shock diameter.
  Standard – 51mm
  Nivomat – 63mm
- Vehicles with Nivomat rear shocks are not compatible with our rear shocks (IMS29-50733), In order to achieve proper fitment, these OE Jeep part numbers below are required that you will have to buy from Jeep
- Shock mount plate P/# 5181844AA
- Shock mount P/# 68029590AE
- Bumper jounce P/# 68029591AC
Rated 5.00 out of 5
(8 reviews)
From $2,025.00 Select options
4Runner 1st Gen (9/1985-1989)
Dobinsons Rear Leaf Springs Pair for Toyota 4Runner 1984 to 1989
- Suits 1984-1989 Toyota 4Runner with rear leaf springs
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
Rated 5.00 out of 5
(4 reviews)
$710.00 Add to cart
Full Suspension Kits - 4runner 1st Gen
Dobinsons Toyota 4Runner 1st Gen Suspension – 1985-1989
- Suits 1985 to 1989 1st Gen Toyota 4Runner, with torsion bar IFS up front and leaf springs in the rear
- Select all or which parts you would like for your vehicle
- Choose from different shock types, twin tube or monotube
- Comprehensive complete full suspension replacement when all parts are chosen
- High quality components built to last and endure all climates
- With all parts purchased, this will yield 2″ lift front and rear
- Select a part from the drop down list, then click the small square that appears to the right of it to see the full specs of that product
Rated 5.00 out of 5
(13 reviews)
From $945.00 Select options
Trooper
Dobinsons C21-215V Rear Coil Springs for Isuzu Trooper 2001-2002 – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- Stock of this item is not updated online. Email or call us to check stock before ordering
Rated 5.00 out of 5
(17 reviews)
$270.00 Add to cart
Trooper
Dobinsons Isuzu Trooper (Acura SLX) Suspension Kit for 1992-2002
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Includes 2 Front Shocks, 2 Front Torsion Bars, 2 Rear Shocks, and 2 Rear Coil Springs
- Suits 1992-2000 and 2001-2002 models, with a change in rear coils
- NOTE: Since these vehicles are more rare, some products may have a 1-2 month lead time. Email us in advance for an ETA prior to ordering if you’re concerned about timing
Rated 5.00 out of 5
(11 reviews)
From $1,420.00 Select options
Accessories
Dobinsons 4×4 Portable 12V High Output Air Compressor Kit with Bag + Hose and Gauge
- 12 Volt, Heavy Duty
- Air Compressor
- Thermal Overload Protection
- Air Flow: 72L/min – Maximum Pressure: 150 psi
- Single 40mm Piston
- 2.4m Power Cable with Battery Clips
- 5m PU Hose
- In-Line Pressure Gauge & Fuse
- Rubber Anti-Vibration Feet
- Hi-Temp 7.5m P.A Air Hose
- Quick Release Tyre Chuck
- Removable Air Filters
- Permanent Magnetic Motor
- Removable Base for Permanent Mounting
- Includes 3 Nozzle Adaptors & Carry Bag
Rated 5.00 out of 5
(10 reviews)
$190.00 Read more
Snorkel
Dobinsons 4×4 Replacement Snorkel Head – 85mm / 3.34″
- Rotationally molded using precision CNC shaped aluminum dies
- Increases air intake height to allow safer water crossings and reduce dust intake
- Increased air intake height rams cooler, cleaner air into the engine increasing engine performance
- Manufactured from high quality UV resistant LLDPE
- Does NOT include replacement hose clamp
(0 reviews)
$50.00 Add to cart
On Backorder
Armor
Dobinsons 200 Series Winch Bumper | Land Cruiser 200 Series 2008 to 8/2015
- Airbag and winch compatible
- Driving Light Mounts
- Heavy Duty Black Powder Coat Finish
- 3mm Thick Main Body, 4mm + 5mm Thick Brackets, 1.6mm Bash Plates, 51-76mm top tubes depending on vehicle
- Includes Turn Signals, Fog Lights, and all Required Hardware for Installation
- Includes filler panels for under the headlights to fill the gap to the bumper. Old bumper cover does not get cut or get reused
- Separate Winch Cradle System, making installation faster
- Parking sensor, front camera and radar compatible (can’t mount parts in front of them)
- Cannot reuse headlight washers with this bumper
- Supplied Black, but can be painted by your paint shop
- Suits 12000 LB Low Mount Winches with non-integrated control box
- Installation instructions
- Ships to the nearest freight terminal for pickup, unless you add the home delivery fee below. We will be in touch to let you know the terminal location
Rated 5.00 out of 5
(4 reviews)
From $2,035.00 Select options
Recovery
Dobinsons 4×4 Kinetic Snatch Tow Recovery Rope 28900 LBS (13100 KG) 30FT
- Rated at 28,900 LBS (13,100 KG), 7/8″ Diameter (22mm), 30FT Total Length
- UV & Water Resistant, made from High Quality 66 Grade Nylon
- Lightweight high strength Double Braided 24 Strand Design
- Spliced & Stitched End Loops with Protective Sleeves
- NATA Approved, Australian Laboratory Tested
Rated 5.00 out of 5
(7 reviews)
$150.00 Add to cart
80 Series Land Cruiser (1990-1997)
Dobinsons 80 Series Front Bump Stop Extensions Kit (1.0-2.0 in)
- Suits the Front of all Toyota Land Cruiser 80 Series from 1990 to 1997
- 1″ (25mm) extensions stackable up to two per spot for a total of 2″ (50mm) of thickness
- Durable Solid Steel Spacers
- Sold as a Kit for inner and outer rear bump stops
- The inner goes inside the coil spring on the inner bump stop
- The outer goes between the mount and the bump stop on the frame
- Space down your bump stops to prevent shock bottom outs at full compression
- Keep your tires out of your fenders if they’re oversized by spacing down the bump stops
- General bump stop extension guidelines (will vary based on brand of shocks and bump stops used)
  
  Dobinsons 0-3″ lift shocks: Extensions are not necessary, unless running oversized tires
  
  Dobinsons 4-5″ lift shocks: Front needs about .5″ of bump stop extension, rear needs 2” of bump extension
  
  Dobinsons 6″ lift shocks: Front needs about 1.5” bump stop extension, rear needs a 3” extension or 2″ extension with extended length bump stops
- We offer replacement bump stops as well Here
Rated 5.00 out of 5
(2 reviews)
$150.00 Add to cart
Rav4
FREE SHIPPING
within 48 US States
Dobinsons Toyota Rav4 2.0″ Lift Kit for 2019-2024
- Dobinsons Rav4 2.0″ Lift Kit for Toyota Rav4 from 2019-2024 models
- Complete 2.0″ suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
  
  RWD vehicles will yield about 1″ more lift in the front
  
  Hybrid vehicles will yield about 0.5″ less lift
  
  Plug in Hybrid will yield about 1″ less lift
- Superior Designed Nitro Gas Shocks, thicker walls, longer life
- Japanese NOK Multi-Lip seals
- Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings
- Double Chrome hardened rods
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Coils are offered in 3 different colors
- Struts and shocks are black in color
- Front OE Strut boot and bump stop will need to be reused
- Includes 2 Front Struts, 2 Rear Shocks, and 4 Coil Springs
Rated 5.00 out of 5
(5 reviews)
From $1,310.00 Select options
200 Series Land Cruiser (2008-2021)
Dobinsons C59-568 2.5″ HD Land Cruiser 200 Series Front Coils – Pair
- C59-568 – 2.5″ lift with 175-220LBS constant weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 455/450mm free height, 19mm wire, 580LB rate
- Sold as a Pair
Rated 5.00 out of 5
(12 reviews)
$270.00
Coil Color

Dobinsons C59-568 2.5" HD Land Cruiser 200 Series Front Coils - Pair quantity
Select options This product has multiple variants. The options may be chosen on the product page
Rear Drawers
Dobinsons DW59-028K Wing Side Panel Kit for Lexus GX470
- Suits Lexus GX470 2003-2009
- Complete wing kit for both sides to suit Dobinsons rear drawer systems
- Includes vertical and horizontal pieces, brackets and hardware
- Fills in the side parts left exposed once drawers have been installed, providing a neat finish
- Drawers are sold separately
Rated 5.00 out of 5
(3 reviews)
$260.00 Add to cart
Dobinsons
FREE SHIPPING
within 48 US States
Dobinsons IMS59-50229 Monotube 2.2″ IFP Rear Shocks Pair
- Suits the rear of Toyota Hilux Revo 2016+ and Toyota Tacoma 1998-2004 (for long travel)
- For the Tacoma, these are considered long travel shocks for maximum droop. Additional parts may be required to get that travel out of the truck, such as bump stop extensions, longer brake lines, etc
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Dobinsons IMS59-50229 Specifications: 650mm extended, 416mm compressed, 56mm body size
Rated 5.00 out of 5
(11 reviews)
$580.00 Add to cart
Tundra 3rd Gen (2022-2024)
FREE SHIPPING
within 48 US States
Dobinsons MRA59-A887 2.6″ 3-Way Adjustable Rear Shocks Pair
- Suits 2022+ Toyota Tundra Rear with 1.0-3.0″ of Lift
- These shock run softer internal valving than the MRA59-A687 (which are better suited to heavy loads)
- 3-way adjustable valving – Adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 22mm / 7/8″ shaft diameter
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Piggyback Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- 674mm extended, 420mm compressed
- Installation Instructions of the MRA Shocks
Rated 5.00 out of 5
(15 reviews)
$1,350.00 Add to cart
Upper Control Arms
FREE SHIPPING
within 48 US States
Dobinsons Billet Aluminum UCA’s Pair | 200 Series Land Cruiser
- Super strong billet aluminum front upper control arms (UCA’s)
- Suits 2008-2021 Toyota Land Cruiser 200 Series and Lexus LX570
- Complete kit for both left and right hand side
- OE-style sealed ball joints for a maintenance free life
- OE-style high quality rubber bushings for maximum NVH dampening and longevity
- No greasing or maintenance required at all, completely noise-free operation
- Adjustable on-vehicle for quick and easy alignment.
- Adjustable Camber and Caster for perfecting the vehicle’s handling
- O-ring sealed ball joint cap for protection against the elements
- Works for any lift height of 1.5″ or more
- *Must reuse OEM Washers
- Installation Instructions
- We recommend visiting an offroad specific shop for alignment, a regular alignment shop may not be able to adjust and align properly due to the added adjustability these arms offer
- Replacement Ball Joints can be ordered here
- Photos for illustration purposes
Rated 5.00 out of 5
(8 reviews)
$1,195.00 Add to cart