Your cart is currently empty!
Exceptions
Showing 121–150 of 1016 resultsSorted by popularity
-
FirestoneFREE SHIPPING
within 48 US StatesFirestone 4164 Coil-Rite Rear Helper Air Springs (Airbags) | 200 Series and Sequoia
- Firestone 4164 Suits Toyota Landcruiser 200 Series and Lexus LX570 2008-2020, Toyota Sequoia 2008-2022 with coil springs in the rear
- Complete kit – 1 per vehicle
- Inserts inside your rear coil springs to add additional load support
- Manually inflate or deflate the air bags to add or remove support or height
- Perfect for people who tow, or regularly load up fully and need additional height or support
- Works with all Dobinsons rear coils for these vehicles
- Works with 0-1.5″ of lift
- Route the airlines to your rear bumper or a suitable place to easily add or remove air to the bags
- Installation Manual, Click Here
- We also sell a Firestone air compressor and gauge kit to fill this up from inside the vehicle
(5 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons 3-Way Adjustable MRR Front Struts Pair | Land Cruiser 200 Series 2008-2021
- Suits 2008-2021 Toyota Land Cruiser 200 Series
- Adjuster rings on strut body are black, not purple
- The terms MRA and MRR are used interchangeably. The A stands for Adjustable in the part number or SKU
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 22mm / 7/8″ shaft diameter
- Height adjustable with a fully threaded body
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- SOLD IN PAIRS
- Full 2 year limited warranty, no set rebuild time period
- Does not include coil springs or top mounts – sold separately
- Reservoir mounting installation
- Must mount the banjo fitting and hose inwards to engine on MRA struts
(18 reviews) -
200 Series Land Cruiser (2008-2021)FREE SHIPPING
within 48 US StatesDobinsons Toyota Land Cruiser 200 Series IMS Lift Kit | 2008-2021
- Suits Toyota Land Cruiser 200 Series and Lexus LX570 from 2008 to 2021 Models
- Complete IMS suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
- Coils springs are marked with white labels – DO NOT REMOVE – and they are also side specific!!
- Base kit Includes 2 Front IMS Struts, 2 Rear IMS Shocks, and 4 Coil Springs
(12 reviews) -
200 Series Land Cruiser (2008-2021)FREE SHIPPING
within 48 US StatesDobinsons Toyota 200 Series Land Cruiser 2008-2021 1.0-2.5″ Lift Kit (all options)
- Suits Toyota Land Cruiser 200 Series from 2008 to 2021 Models
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base kit Includes 2 Front Struts, 2 Rear Shocks, and 4 Coil Springs
- Coils springs are marked with white labels – DO NOT REMOVE – and they are also side specific!!
- FOR MRA STRUTS, BANJO FITTING ON LOWER STRUT FACES INWARDS TOWARDS ENGINE ON BOTH SIDES
- Reservoir mounting instructions for MRA struts, it’s the same for KDSS and non-KDSS
(9 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons Land Cruiser 80 Series Rear Bumper with Tire and Jerry Can Carrier 1990-1997
- Suits all Toyota Land Cruiser 80 Series and Lexus LX450 from 1990-1997
- See product walk-around video down below
- Comes with Black Powder Coat
- Stainless Steel Latch and Hardware
- Complete Kit with Everything Included
- All Lighting is 12V LED, requires splicing into original wiring harness (not plug and play)
- Works with Factory Tow Hitch in OE position
- Adjustable offset tire carrier head, suitable up to a 35″ tire, on right side (US Passenger side)
- Includes single or dual Jerry Can Carrier on the left side (US Driver’s side)
- Instructions Page
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address
(15 reviews) -
Hats Shirts PatchesFREE SHIPPING
within 48 US StatesExit Offroad Stickers – Pair
- Pair of Exit Offroad stickers
- Genuine Exit Offroad logo with green backing and white letters and inner border, with green outsider border for a neat finish
- Measures 3.5″ wide by 2.25″ tall – it is set at an angle as the pictures show
- Item ships by USPS 1st Class Mail – always ships separate from any parts ordered
- 1st Class Mail does not provide a tracking number, it’s a regular letter size envelope
(20 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons 3-Way Adjustable MRR Toyota 4Runner Lift Kit | 2003-2009 (0-3.5″)
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the 4th Gen 4Runner 2003-2009
- If you have a 2WD model, add 1″ to the listed lift heights of the front coils due to the lighter front weight of the vehicle
-
The terms MRA and MRR are used interchangeably. The A stands for Adjustable in the part number or SKU
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- For information and specs on the products in the drop down lists below, select an item, then click the small square box that will appear to the right to be taken to that product page
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Full 2 year limited warranty, no set rebuild time period
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base Kit Includes 2 Front MRA Struts, 2 Rear MRA Shocks, and 4 Coil Springs – Select your preferences
- You can go from a standard suspension to full long travel with all the options listed here
- Common installation instructions
(10 reviews) -
Skid PlatesFREE SHIPPING
within 48 US StatesARB 5421100 Skid Plate Kit | Lexus GX470 GX460 (without KDSS)
- Suits all Lexus GX470 and GX460 WITHOUT KDSS
- Click here to check if you have KDSS or not
- 3mm pressed and folded sheet steel adds more strength than a standard folded sheet.
- Laser cut sheet steel.
- Zinc plated and powder coated with a silver textured finish.
- Recessed mounting bolts are protected and easy to remove for vehicle servicing.
- The Under Vehicle Protection will fit with or without an ARB front bumper. Fitment has not been confirmed with other aftermarket bumper designs
- Comprises 4 panels: Front Panel (Protects power steering, engine sump, sway bar), Diff Panel (Protects front diff mounts, engine sump), Transmission (Protects transmission and transmission controls) and Transfer Case (Protects transfer case)
- See more details below as well as product video
(10 reviews) -
100 Series Land Cruiser IFS (1998-2007)FREE SHIPPING
within 48 US StatesDobinsons GS59-786 Ext Travel Front Shocks Pair | Land Cruiser 100 Series (2-2.5″ lift)
- Suits Toyota Land Cruiser 100 Series and Lexus LX470 1998-2007
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- **Photo for illustration purposes, not of actual shocks
- 470mm extended, 315mm compressed
- These shocks REQUIRE aftermarket UCA’s and a complete Diff Drop Kit
(9 reviews) -
200 Series Land Cruiser (2008-2021)FREE SHIPPING
within 48 US StatesDobinsons Rear Adjustable Panhard Rod | Toyota Land Cruiser 200 250 300 GX550
- Suits Toyota Land Cruiser 200 Series 2008-2021, Toyota Tundra 2022+ and Toyota Sequoia 2023+, and Toyota Land Cruiser 300 Series 2022+, and 2024+ Toyota Land Cruiser 250 Series, and Lexus GX550
- Replaces OE Rear Panhard Rod, adjustable to suit lift height
- Zinc plated steel and E-coated with high quality rubber bushes supplied
- Off-car adjustable, cannot be set while fully installed
- For 35mm (1.25″) of lift or more
- Rubber Bushes installed and offer greater flexibility than polyurethane, providing maximum articulation
- Panhard rod measures 41″ compressed and can be extended up to 44″ eye to eye
(15 reviews) -
Rear Bumpers
Dobinsons Land Cruiser 100 Series Rear Bumper and Lexus LX470 with Tire and Jerry Can Carrier 1998-2007
- Suits all years sold in USA of the Land Cruiser 100 Series and Lexus LX470 (1998-2007)
- Comes standard as Black Powder Coat (some photos show a customer’s color-matched rear bumper)
- Stainless Steel Latch and Hardware
- Complete Kit with Everything Included
- All Lighting is 12V LED, requires splicing into original wiring harness (not plug and play)
- Works with Factory Tow Hitch in OE position
- Adjustable offset tire carrier head, suitable up to a 35″ tire
- Installation Page
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address
(16 reviews) -
DobinsonsFREE SHIPPING
within 48 US StatesDobinsons MRA59-A222 3-Way Adjustable MRR Extended Travel Front Struts Pair
- Suits 2001-2007 Toyota Sequoia 4×4, 1998-2004 Toyota Tacoma 4×4, 2000-2006 Toyota Tundra 4×4, 1996-2002 Toyota 4Runner 4×4
-
Suits Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- The terms MRA and MRR are used interchangeably. The A stands for Adjustable in the part number or SKU
- Height adjustable with a fully threaded body
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- 458mm extended length, 335mm compressed
- Standard coil seat height is 164mm
- Includes Universal Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Does not include coil springs or top mounts – sold separately
- The included droop spacer goes on top of the strut, under the first washer, if lifting more than 2.0″ (see attached photo)
- Instructions for setting coil seat height
(15 reviews) -
All Pro OffroadFREE SHIPPING
within 48 US StatesBody Mount Relocation Kit | FJ & 2010-2024 4Runner GX460
- Suits Toyota 4Runner 5th Gen 2010-2024, and all years Toyota FJ Cruiser and Lexus GX460
- 1/4″ Thick CNC cut and formed steel
- Design includes guard for body mount bushing and bolt
- Moves body mount completely behind the firewall
- Instructions available
- Product requires welding for installation. Welding should be done by an experienced welder
- Installation Instructions
(3 reviews) -
Full Suspension Kits - 4th Gen 4runnerFREE SHIPPING
within 48 US StatesDobinsons 1-3.5″ Pre-Assembled IMS Coilovers for Toyota 4Runner 4th Gen 2003-2009
- Suits 2003-2009 Toyota 4Runner 4th Gen 4×4 Models
- Looking for a quick and easy way to lift your 4Runner? This is your answer
- A 4×2 model lifts 1″ extra with the 4×4 lift heights
- Select your desired lift height and spring rate – we’ll take care of the rest!!
- Dobinsons IMS are height adjustable by a fully threaded body
- The Dobinsons IMS Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
- Fully rebuildable and re-valvable
- Extended Travel – 567mm extended, 417mm compressed
- SOLD IN PAIRS – READY TO BOLT IN
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Photos for illustration purposes
- Instructions for setting coil seat height
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle. Adding 2.5″ or more lift, new UCA’s should be added for proper articulation and correct wheel alignment
- Click to see Matching rear shocks
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
(5 reviews) -
200 Series Land Cruiser (2008-2021)FREE SHIPPING
within 48 US StatesTimbren ABSTORLC2 Active Off Road Toyota 200 Series Rear Bump Stops 2008-2021
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation
- Satisfaction Guarantee
- Lifetime Warranty
- Suits 2008 to 2021 Toyota Landcruiser 200 Series Rear End
- Click here for instructions
(12 reviews) -
200 Series Land Cruiser (2008-2021)FREE SHIPPING
within 48 US StatesDobinsons 3-Way Adjustable MRR Toyota Land Cruiser 200 Series Lift Kit | 2008-2021
- Suits Toyota Land Cruiser 200 Series and Lexus LX570 from 2008 to 2021 Models
-
The terms MRA and MRR are used interchangeably. The A stands for Adjustable in the part number or SKU
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Remote Reservoir 3-way adjustable Shocks, Superior Design, thicker walls, longer travel
- Adjust high and low speed compression (HSC and LSC) and rebound adjustment front and rear
- Massive 66mm (2.6″) body size with 60mm pistons front and rear
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base kit Includes 2 Front Struts, 2 Rear Shocks, and 4 Coil Springs
- BANJO FITTING ON LOWER STRUT FACES INWARDS TOWARDS ENGINE ON BOTH SIDES
- Reservoir mounting instructions, it’s the same for KDSS and non-KDSS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen in the external reservoir
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- Coils springs are marked with white labels – DO NOT REMOVE – and they are also side specific!!
(8 reviews) -
FirestoneFREE SHIPPING
within 48 US StatesToyota Tacoma Firestone Airbag & Cradle Bundle 2005-2023
- Suits 2005-2023 Toyota Tacoma 4×4 Trucks
- System Type: Leaf Spring Mount
- Load Capacity: 5,000 lbs per pair
- Bag/Spring Type: Double Convoluted
- Installation Type: Bolt On, No Drilling Required
- Inflation Method: Manual Inflation
- Min Air Pressure: 5 PSI, Max Air Pressure: 100 PSI
- Firestone Installation Instructions
- Firestone Airbag Kits do not have a warranty when used with an Airbag Cradle Kit
- Enjoy full suspension travel and the benefits of air bags with the Air Lift Air Bag Cradle Kit
- Fits most full-size trucks and SUVs running 6” diameter bellow-type rear air bags
- Mounts to your truck’s lower air bag suspension mounting bracket—Installation Instructions (PDF)
- Allows full factory differential drop without fear of bag damage
- Provides room for air bags to safely cycle with no loss of wheel travel
- Crafted from super-tough polyurethane
- Kit includes two cradles and mounting hardware
- Proudly built in the USA
- Cradle mounts to top of leaf spring, airbag mounts to frame above only
- We also sell a Firestone air compressor and gauge kit to fill this up from inside the vehicle
(5 reviews) -
GX460 (2010-2023)FREE SHIPPING
within 48 US StatesDobinsons 3-Way Adjustable MRR Lexus GX460 Lift Kit | 2010-2023 (1.5-3.5″)
- Every MRR suspension option from Dobinsons to lift your Lexus GX460 all on one page
- Here you can lift from a low height up to the maximum bolt-on lift height by making your selections below
- The terms MRA and MRR are used interchangeably. The A stands for Adjustable in the part number or SKU
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Rear coil springs are optional, in case you want to keep the factory rear ride height
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- External Remote Oil Reservoir with dual speed compression adjustment
- Single Piece Lower Leg, Natural Rubber Bushings Top and Bottom
- Triple Lip Oil Seal for Superior Lifespan
- Direct Bolt-on, Fully Rebuildable Design
- Pre-Charged with Nitrogen, Ready to be Assembled and Installed
- EDP Surface Protection, 3mm Heavy Duty Wall Thickness
- Includes Universal Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Installation Instructions for Front Resi Mounts and Rear Resi Mounts
- Front height adjustment instructions
(13 reviews) -
200 Series Land Cruiser (2008-2021)FREE SHIPPING
within 48 US StatesDobinsons GS59-688 Front Struts Pair | Toyota Land Cruiser 200 Series 2008-2021
- Suits all years of Toyota Land Cruiser 200 Series and Lexus LX570
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals
- Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings
- Double Chrome hardened rods
- Metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS59-688 Specifications: 600mm extended, 435mm compressed, 60mm body size
(10 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons GS59-088 Front Shocks Pair | Toyota 4Runner Pickup 1985 to 1995
- Suits Toyota 4Runner 1st and 2nd Gen, 1985 to 1995 models with torsion bar suspension, and Toyota Hilux/Pickup 1998 to 2004 models with IFS torsion bar suspension
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- 367mm extended, 237mm compressed
(9 reviews) -
4Runner 5th Gen (2010-2024)
1/2″ Rear Coil Spacer Single | 4Runner FJ Cruiser Lexus GX470 GX460
- Suits Toyota 4th Gen 4Runner – 2003 to 2009, Toyota 5th Gen 4Runner – 2010 to 2024, Toyota FJ Cruiser – all years, Lexus GX470 – all years, Lexus GX460 – all years, Toyota Prado 120 – all years, Toyota Prado 150 – all years
- Sold Individually
- Long lasting – hard durometer polyurethane
- Easily add rear lift or fix leaning issues
- Optional- bolt to the coil bucket for easy installation. We have noticed that it can be difficult for customers to install other brands, as they tend to slide around while you are trying to reinstall the spring. Bolting it to the coil bucket eliminates that issue.
- Do not stack
- Fits any OE style spring – Top Cone isolator- Apache, Dobinsons, Ironman, OEM, Old Man Emu, Alldogs Offroad, etc.
- NOT compatible with Eibach rear lift springs used in their air to coil conversions – GX470/460 etc.
- Cone Isolator shown in picture not included
- Airbag Models will need to convert for coil springs for these to work
(10 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons MRA59-A446 3-Way Adjustable Front Struts Pair | Tundra 22+, Sequoia 23+
- Suits Toyota Tundra 2022-2025+ and Toyota Sequoia 2023-2025+
- The terms MRA and MRR are used interchangeably. The A stands for Adjustable in the part number or SKU
- Can be used with OEM coils or with Dobinsons lifted coils
- Height adjustable with a fully threaded body
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- SOLD IN PAIRS
- Full 2 year limited warranty, no set rebuild time period
- Does not include coil springs or top mounts – sold separately
- Must mount the banjo fitting and hose inwards on MRA struts
- Coil seat for MRA59-A446 should be set at 175mm (6.87″) from the strut bushing eye
- Installation Instructions
(14 reviews) -
All Pro OffroadFREE SHIPPING
within 48 US StatesBody Mount Relocation Kit | Toyota Tacoma 2005-2015
- Suits Toyota Tacoma 2005-2015
- 1/4″ Thick CNC cut and formed steel
- Design includes guard for body mount bushing and bolt
- Moves body mount completely behind the firewall
- Instructions available
- Product requires welding for installation. Welding should be done by an experienced welder
- Installation Instructions
(3 reviews) -
Brake LinesFREE SHIPPING
within 48 US StatesExtended Rear Brake Lines +4″ for Toyota Tacoma 2005-2023 (Black)
- American made D.O.T. Certified extruded teflon core, stainless steel braided and coated with a PVC cover
- 4″ longer than stock for long travel suspension lifts
- Suits the following vehicles: Toyota Tacoma 2005-2015, Toyota Tacoma 2016+
- Can be used with any lift height, however these are extra long for long travel rear shocks
- Sold as a pair with new retaining clips
- This set is BLACK in color
(26 reviews) -
Full Suspension Kits - 5th Gen 4RunnerFREE SHIPPING
within 48 US StatesDobinsons 2-3.5″ Extended Travel 3-Way Adj MRR Coilovers | Toyota 4Runner 2010-2024
- Suits 2010-2024 Toyota 4Runner 5th Gen 4×4 Models – Extended Travel
- Looking for a quick and easy way to lift your 4Runner? This is your answer
- A 4×2 model lifts 1″ extra with the 4×4 lift heights
- Select your desired lift height and spring rate – we’ll take care of the rest!!
- The terms MRA and MRR are used interchangeably. The A stands for Adjustable in the part number or SKU
- Dobinsons MRR are height adjustable by a fully threaded body
- The Dobinsons MRR Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- MRA59-A574 Extended Travel – 575mm extended, 420mm compressed
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
- Resi installation instructions
- To run these Extended Travel coilovers, new UCA’s need to be added for proper articulation and correct wheel alignment. A diff drop kit is also recommended to minimize CV binding at full droop
- Link to Matching rear shocks
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
- Lift heights are based on the standard 20″ front and 22″ rear, measured from the center of the hub up to the fender edge. Many vehicles come in at different heights from the factory based on trim levels and options
(3 reviews) -
Frontier D41 (2022-2025+)FREE SHIPPING
within 48 US StatesDobinsons IMS45-50653 2.2″ IFP Rear Shocks Pair | Nissan Frontier D41 2022+
- Suits Nissan Frontier D41 2022-2024+ models – for 0-3″ of lift
- SOLD IN PAIRS
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
(18 reviews) -
40 Series Land Cruiser Late (1980-1984)FREE SHIPPING
within 48 US StatesDobinsons IMS59-50635 2.2″ IFP Shocks Pair Toyota Land Cruiser FJ40 BJ40 FJ45
- Suits the front end of all FJ40 Land Cruisers and all FJ45/47 front ends (25mm and 35mm spring eyes)
- Suits the rear end of early model FJ40’s up to 01/1975
- SOLD IN PAIRS
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
(16 reviews) -
80 Series Land Cruiser (1990-1997)FREE SHIPPING
within 48 US StatesDobinsons GS59-685 6-7″ Rear Shocks Pair | Toyota 80 Series Land Cruiser 1990-97
- Suits Toyota Land Cruiser 80 series and Lexus LX450 1990-1997 for 6-7″ of Lift
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals
- Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS59-685 Specifications: 730mm extended, 432mm compressed, 60mm body size
- Bump stop extensions and longer brake lines must be run with these longer shocks
- Sold in Pairs
(11 reviews) -
Struts + Shocks - Tundra 2022+FREE SHIPPING
within 48 US StatesDobinsons 2.0-3.0″ Pre-Assembled IMS Coilovers for Toyota Tundra 2022-2025+
- Suits Toyota Tundra 2022-2025+ Models
- TRD Pro Models yield 1″ less lift than listed here, as they are already lifted taller than base models
- Hybrid Models lift 1-1.5″ less lift than listed here
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- Looking for a quick and easy way to lift your Tundra? This is your answer
- Select your desired lift height and tell us your weight – we’ll take care of the rest!!
- Dobinsons IMS are height adjustable by a threaded body with adjustable collar
- The Dobinsons IMS Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
- Fully rebuildable and re-valvable
- SOLD IN PAIRS – READY TO BOLT IN
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- Full 2 year limited warranty, no set rebuild time period
- Photos for illustration purposes – Tundra IMS coilovers use a slightly different top mount
- Instructions for setting and adjusting coil seat height
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle. Adding 2.5″ or more lift, new UCA’s should be added for proper articulation and correct wheel alignment
- If doing a 2.5″ lift or higher in the front, a diff-drop kit or longer TRD CV-axles are REQUIRED, failure to complete these requirements could cause OE CV-axle failure
- TRD axle shafts: PT362-3432B and PT362-3431B
- Standard Coil seat height for IMS59-60446 is set at 175mm (6.87″) from the strut bushing eye to top of coil isolator
- Link to Matching rear shocks
- A Diff Drop Kit needs to be run with 3″ of lift
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
(5 reviews)
