Archives

on

on
  • Remote Resi Coilovers Suit Nissan Xterra 4×4 Models (2005-2015) – lifts 1.5″
  • Looking for a quick and easy way to lift your Xterra?  This is your answer
  • Dobinsons MRA are height adjustable by a fully threaded body
  • The Dobinsons MRA Coilovers will come pre-assembled with new struts, coils and top mounts
  • 3-way adjustable valving – adjust high and low speed compression and rebound
  • Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
  • 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
  • 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
  • 20 Stage Low Speed Compression – For creepy crawling and cornering
  • 15 Stage Rebound – Control your coils, prevent bucking
  • 50mm CNC Machined High Flow Billet Aluminum Race Piston
  • 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
  • Upgraded 3 Stage FKM‐HNBR Sealing System
  • TSUGAMI™ CNC machined components for precise tolerances
  • Parker™ Braided High Pressure Hoses
  • 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
  • T6 6061 Height Adjustable Spring Seat
  • Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
  • 60mm Full 6063 aluminum remote reservoir
  • Lightweight CNC Machined Low Friction floating piston
  • High Quality O.E.M. Grade Natural Rubber Bushings
  • Single Piece Lower Leg
  • EDP Surface Protection
  • Direct Bolt-On Design
  • CNC TIG Precision Welded Body End Mounts
  • Fully Rebuildable Design
  • SOLD IN PAIRS
  • Includes Reservoir Bracket and Hardware, and Adjuster Wrench
  • Full 2 year limited warranty, no set rebuild time period
  • Length specs – 395mm extended, 266mm compressed
  • Photos for illustration purposes
  • FITTING INSTRUCTIONS
  • Instructions for setting coil seat height
  • Link to the matching rear shocks
  • Please NOTE: Assembled coilovers cannot be returned, as they are made to order

on
  • Extended Travel Coilovers Suit Nissan Xterra 4×4 Models (2005-2015) – lifts 2.5″
  • These extended travel struts REQUIRE aftermarket UCA’s for full travel, like Dobinsons
  • Looking for a quick and easy way to lift your Xterra?  This is your answer
  • Dobinsons MRA are height adjustable by a fully threaded body
  • The Dobinsons MRA Coilovers will come pre-assembled with new struts, coils and top mounts
  • 3-way adjustable valving – adjust high and low speed compression and rebound
  • Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
  • 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
  • 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
  • 20 Stage Low Speed Compression – For creepy crawling and cornering
  • 15 Stage Rebound – Control your coils, prevent bucking
  • 50mm CNC Machined High Flow Billet Aluminum Race Piston
  • 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
  • Upgraded 3 Stage FKM‐HNBR Sealing System
  • TSUGAMI™ CNC machined components for precise tolerances
  • Parker™ Braided High Pressure Hoses
  • 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
  • T6 6061 Height Adjustable Spring Seat
  • Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
  • 60mm Full 6063 aluminum remote reservoir
  • Lightweight CNC Machined Low Friction floating piston
  • High Quality O.E.M. Grade Natural Rubber Bushings
  • Single Piece Lower Leg
  • EDP Surface Protection
  • Direct Bolt-On Design
  • CNC TIG Precision Welded Body End Mounts
  • Fully Rebuildable Design
  • SOLD IN PAIRS
  • Includes Reservoir Bracket and Hardware, and Adjuster Wrench
  • Full 2 year limited warranty, no set rebuild time period
  • Length specs – 278mm compressed and 410mm extended
  • Photos for illustration purposes
  • FITTING INSTRUCTIONS
  • Instructions for setting coil seat height
  • Link to the matching rear shocks
  • Please NOTE: Assembled coilovers cannot be returned, as they are made to order

on
  • Extended Travel Coilovers Suit Nissan Frontier D41 4×4 Models 2022-2023+ – lifts 2-3″ depending on selections made below
  • These extended travel struts REQUIRE aftermarket UCA’s for full travel, like Dobinsons
  • Looking for a quick and easy way to lift your Frontier?  This is your answer
  • Dobinsons MRA are height adjustable by a fully threaded body
  • The Dobinsons MRA Coilovers will come pre-assembled with new struts, coils and top mounts
  • 3-way adjustable valving – adjust high and low speed compression and rebound
  • Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
  • 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
  • 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
  • 20 Stage Low Speed Compression – For creepy crawling and cornering
  • 15 Stage Rebound – Control your coils, prevent bucking
  • 50mm CNC Machined High Flow Billet Aluminum Race Piston
  • 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
  • Upgraded 3 Stage FKM‐HNBR Sealing System
  • TSUGAMI™ CNC machined components for precise tolerances
  • Parker™ Braided High Pressure Hoses
  • 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
  • T6 6061 Height Adjustable Spring Seat
  • Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
  • 60mm Full 6063 aluminum remote reservoir
  • Lightweight CNC Machined Low Friction floating piston
  • High Quality O.E.M. Grade Natural Rubber Bushings
  • Single Piece Lower Leg
  • EDP Surface Protection
  • Direct Bolt-On Design
  • CNC TIG Precision Welded Body End Mounts
  • Fully Rebuildable Design
  • SOLD IN PAIRS
  • Includes Reservoir Bracket and Hardware, and Adjuster Wrench
  • Full 2 year limited warranty, no set rebuild time period
  • Length specs – 278mm compressed and 410mm extended
  • Photos for illustration purposes
  • FITTING INSTRUCTIONS
  • Instructions for setting coil seat height
  • Link to the matching rear shocks
  • Please NOTE: Assembled coilovers cannot be returned, as they are made to order