Upper Control Arms

Showing 1–30 of 85 resultsSorted by popularity

Sale!
4Runner 4th Gen (2003-2009)
On Sale All November!!
Dobinsons Tubular UCA Pair | 4Runner FJ Cruiser GX470 GX460
- Suits Toyota 4Runner 4th and 5th Gen 2003-2024, FJ Cruiser all years, Lexus GX470 and GX460
- Complete ASSEMBLED kit for both left and right hand side, includes new ball joints OE style rubber frame bushings, and washers
- Has 3 degrees of caster built in, no adjustability or settings required
- Has more clearance around the ball joint than factory UCA’s for better tire clearance
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Works for any lift height, as factory alignment correction will be enhanced with these
- Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
- Curved washers face outwards away from bushings during installation, per the product video
- Product Video
- Includes left and right assembled arms, ball joint caps, and hardware to mount ABS lines
- Also sold without ball joints
- Replacement Ball Joints can be ordered here
Rated 5.00 out of 5
(8 reviews)
Original price was: $795.00.Current price is: $675.75. Add to cart
SPC
FREE SHIPPING
within 48 US States
Take 10% off with Coupon
Code "BLACKFRIDAY"!!
SPC 25480 | UCA’s Pair for 4Runner FJ Cruiser GX470 GX460
- Suits 2003-2024 Toyota 4Runner, 2006-2017 Toyota FJ Cruiser, 2003-2009 Lexus GX470, 2010-2023 Lexus GX460
- Improved clearance to get around the spring bucket
- 80° of articulation in its ball joint
- SPC’s arm gives you maximum droop travel.
- SPC’s arms have +2° of caster built into them
- Arm will get you 0° to +4° of caster and ±2° of camber
- Maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming
- New maintenance-free sealed ball joint design
- Installation Instructions
- We offer replacement ball joints as well
Rated 5.00 out of 5
(11 reviews)
$695.95 Add to cart
Sale!
On Backorder
Suspension
On Sale All November!!
ETA is late December
Dobinsons Tubular UCA Pair | Tacoma Hilux Fortuner 2005-23
- Suits Toyota Tacoma from 2005 to 2023, Toyota Hilux Vigo and Revo from 2005+, and Toyota Fortuner 2005 to 2023
- Complete assembled kit for both left and right hand side, includes new ball joints, ball joint caps, OE style rubber frame bushings, and washers
- Has 3 degrees of caster built in, no adjustability or settings required
- Has more clearance around the ball joint than factory UCA’s for better tire clearance
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Works for any lift height of 1.5″ or more. Any height less than that, a proper wheel alignment may not be able to be achieved
- Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
- Product Video
- Also sold without ball joints
- Replacement Ball Joints can be ordered Here
Rated 5.00 out of 5
(9 reviews)
Original price was: $795.00.Current price is: $675.75. Add to cart
Sale!
4Runner 4th Gen (2003-2009)
On Sale All November!!
Dobinsons WA59-522K Adjustable Rear Upper Trailing Arms Pair | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner 2003-2024, FJ Cruiser (all years), Lexus GX470 and GX460
- Fully adjustable now ON THE VEHICLE to properly set the length and pinion angle
- Comes installed with high quality rubber OE style bushings for maximum flexibility and longevity
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Oversized adjusters and rod thickness for maximum strength and durability with nut locking feature
- Zinc plated, then powder coated black, for the ultimate finish and protection
- Instructions written down below in the description
Rated 5.00 out of 5
(12 reviews)
Original price was: $345.00.Current price is: $293.25. Add to cart
Sale!
100 Series Land Cruiser IFS (1998-2007)
On Sale All November!!
Dobinsons Tubular UCA Pair | Land Cruiser 100 + Lexus LX470
- For Toyota Land Cruiser 100 Series and Lexus LX470 1998-2007 models
- Not compatible with AHC, it does not have the bracket in place
- Complete kit for both left and right hand side, includes new 555 ball joints installed, OE style rubber frame bushings installed, and washers
- Has 3 degrees of caster built in, no adjustability or settings required
- Has more clearance around the ball joint than factory UCA’s for better tire clearance
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
- Product Video
- Also sold without ball joints
- Replacement Ball Joints can be ordered here
Rated 5.00 out of 5
(10 reviews)
Original price was: $795.00.Current price is: $675.75. Add to cart
Sale!
80 Series Land Cruiser (1990-1997)
On Sale All November!!
Dobinsons WA59-545K Adjustable Rear Upper Control Arms Pair | Land Cruiser 80 Series
- Suits Land Cruiser 80 Series and Lexus LX450
- Comes with high quality rubber OE style bushings installed for maximum flexibility, and zero noise
- Made from HSLA (High Strength Low Alloy) Steel, 40mm (1.57″) OD and 6mm (0.236″) wall thickness
- Oversized adjusters and rod thickness for maximum strength and durability with double-nut locking feature
- Zinc plated, then E-coated black, for the ultimate finish and protection
Rated 5.00 out of 5
(4 reviews)
Original price was: $345.00.Current price is: $293.25. Add to cart
Sale!
Upper Control Arms
FREE SHIPPING
within 48 US States
On Sale All November!!
Dobinsons Billet Aluminum Adjustable UCA’s Pair | 4Runner FJ Cruiser GX470 GX460
- Super strong billet aluminum front upper control arms (UCA’s) for Toyota and Lexus SUV’s
- Suits 2003-2009 4Runner, 2010-2024 4Runner, FJ Cruiser (all years), Lexus GX470 and Lexus GX460
- Complete kit for both left and right hand side, fully assembled with ball joints pressed in
- High clearance design to clear pretty much every coilover size available
- OE-style sealed ball joints for a maintenance free life
- OE-style high quality rubber bushings for maximum NVH dampening and longevity
- No greasing or maintenance required at all, completely noise-free operation
- Adjustable on-vehicle for quick and easy alignment.
- Adjustable Camber and Caster for perfecting the vehicle’s handling
- Adds 2 or 3 degrees of added caster, and caster can be further adjusted
- O-ring sealed ball joint cap for protection against the elements
- Works for any lift height of 1.5″ or more
- Installation Instructions
- Video on YouTube showing features and Installation
- We recommend visiting an offroad specific shop for alignment, a regular alignment shop may not be able to adjust and align properly due to the added adjustability these arms offer
- Replacement Ball Joints can be ordered here
Rated 5.00 out of 5
(8 reviews)
Original price was: $1,195.00.Current price is: $1,015.75. Add to cart
SPC
FREE SHIPPING
within 48 US States
Take 10% off with Coupon
Code "BLACKFRIDAY"!!
SPC 25470 | UCA’s for Tacoma 2005-2023 Pair
- Suits Toyota Tacoma 2005-2023 4×4 and Prerunner
- Improved clearance to get around the spring bucket
- 80° of articulation in its ball joint
- SPC’s arm gives you maximum droop travel.
- SPC’s arms have +2° of caster built into them
- Arm will get you 0° to +4° of caster and ±2° of camber
- Maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming
- Now with updated maintenance-free sealed ball joints
- Installation Instructions
- We offer replacement ball joints as well
Rated 5.00 out of 5
(10 reviews)
$695.95 Add to cart
Sale!
200 Series Land Cruiser (2008-2021)
On Sale All November!!
Dobinsons Tubular UCA Pair | Land Cruiser 200 Series + Lexus LX570
- Complete assembled kit for both left and right hand side, includes new ball joints, OE style rubber frame bushings, and washers
- These arms come fully assembled with the ball joints and bushings installed
- Has 3 degrees of caster built in, no adjustability or settings required
- Has more clearance around the ball joint than factory UCA’s for better tire clearance
- Made from HSLA (High Strength Low Alloy) Steel
- 5mm (0.2″) wall thickness
- Powder coated black
- Works for any lift height of 1.5″ or more. Any height less than that, a proper wheel alignment may not be able to be achieved
- Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
- Product Video
- Also sold without ball joints
- Replacement Ball Joints can be ordered here
Rated 5.00 out of 5
(8 reviews)
Original price was: $795.00.Current price is: $675.75. Add to cart
SPC
FREE SHIPPING
within 48 US States
Take 10% off with Coupon
Code "BLACKFRIDAY"!!
SPC 25490 | UCA’s for 2008-22 Sequoia & 2007-21 Tundra Pair
- Suits 2008-22 Toyota Sequoia & 2007-21 Toyota Tundra
- Improved clearance to get around the spring bucket
- 80° of articulation in its ball joint
- SPC’s arm gives you maximum droop travel.
- SPC’s arms have +1° of caster built into them
- Arm will get you 0° to +4° of caster and ±2° of camber
- Maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming
- Now with new updated design maintenance-free ball joints
- Installation Instructions
- We offer replacement ball joints as well
Rated 5.00 out of 5
(13 reviews)
$749.95 Add to cart
4Runner 5th Gen (2010-2024)
FREE SHIPPING
within 48 US States
Dirt King Tubular Ball Joint UCA’s Pair – FJ Cruiser 4Runner GX470 GX460
- Suits 4th and 5th Gen Toyota 4Runner from 2003 to 2024 2WD and 4WD, Toyota FJ Cruiser all years, Lexus GX470 and GX460 all years
- CAD designed
- Formed steel bushing gussets
- Constructed with 4130 chromoly tubing
- Preassembled with heavy duty Moog ball joints for fast installation
- Probearing Pro 2 Series bushings (new for 2024)
- Maintenance Free Bushings
- Zinc plated components for corrosion resistance
- Professionally MIG welded
- Powder coated black
- Includes Ball Joint Caps
- Installation Instructions
- Proudly made in the USA
Rated 5.00 out of 5
(4 reviews)
$734.02 Add to cart
Sale!
On Backorder
Upper Control Arms
FREE SHIPPING
within 48 US States
On Sale All November!!
Dobinsons Billet Aluminum Adjustable UCA’s Pair | Toyota Tacoma 2005-23
- Super strong billet aluminum front upper control arms (UCA’s) for Toyota Trucks and SUV’s
- Suits 2005-2023 Toyota Tacoma, 2005+ Toyota Hilux, 2005+ Toyota Fortuner
- Complete kit for both left and right hand side, fully assembled with ball joints pressed in
- OE-style sealed ball joints for a maintenance free life
- OE-style high quality rubber bushings for maximum NVH dampening and longevity
- No greasing or maintenance required at all, completely noise-free operation
- Adjustable on-vehicle for quick and easy alignment.
- Adjustable Camber and Caster for perfecting the vehicle’s handling
- O-ring sealed ball joint cap for protection against the elements
- Works for any lift height of 1.5″ or more
- Installation Instructions
- We recommend visiting an offroad specific shop for alignment, a regular alignment shop may not be able to adjust and align properly due to the added adjustability these arms offer
- Replacement Ball Joints can be ordered Here
Rated 5.00 out of 5
(9 reviews)
Original price was: $1,195.00.Current price is: $1,015.75. Add to cart
Dirt King Fabrication
FREE SHIPPING
within 48 US States
Dirt King Toyota Tundra Tubular Ball Joint UCA’s Pair – Tundra Sequoia
- Suits 2007-2021 model Toyota Tundra 2nd Gens, and 2008-2022 Sequoia 2nd Gens
- Proudly made in the USA
- CAD designed, Formed steel bushing gussets
- Constructed with 4130 chromoly tubing
- Probearing SilentSpin Hybrid bushings
- Maintenance free bushings
- Durable black powder coat
- Preassembled with heavy duty Moog ball joints for fast installation
- Includes ball joint caps
- Zinc plated components for corrosion resistance
- Professionally MIG welded, powder coated black
- Made in the USA
Rated 5.00 out of 5
(4 reviews)
$734.02 Add to cart
Sale!
Dobinsons
On Sale All November!!
Dobinsons UCA Ball Joint for 4Runner FJ Cruiser GX470 GX460 LC200
- Suits Dobinsons UCA’s that fit Toyota 4Runner 4th and 5th Gen 2003-2024, FJ Cruiser all years, Lexus GX470 and GX460, Land Cruiser 100 and 200 Series
- This ball joint will fit UCA part numbers UCA59-001K, UCA59-002K, UCA59-006K, UCA59-201K, UCA59-202K, UCA59-206K
- Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
- Sold individually
- Includes new ball joint, boot, split pin and nut (subject to design changes)
Rated 5.00 out of 5
(6 reviews)
Original price was: $70.00.Current price is: $59.50. Add to cart
Sale!
Dobinsons
On Sale All November!!
Dobinsons Adjustable Rear Upper Trailing Arms Pair | Land Cruiser 100 Series
- Suits Toyota Land Cruiser 100 Series (1998-2007) and Lexus LX470 (1998-2007)
- Fully adjustable to properly set the length and pinion angle
- Comes installed with high quality rubber OE style bushings for maximum flexibility and longevity
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Oversized adjusters and rod thickness for maximum strength and durability with nut locking feature
- Zinc plated, then powder coated black, for the ultimate finish and protection
- Instructions written down below in the description
- We also offer matching Rear Lower Control Arms
Rated 5.00 out of 5
(4 reviews)
Original price was: $345.00.Current price is: $293.25. Add to cart
SPC
FREE SHIPPING
within 48 US States
Take 10% off with Coupon
Code "BLACKFRIDAY"!!
SPC 25460 | UCA’s for Tacoma 98-04 & 4Runner 96-02 Pair
- Suits Toyota Tacoma 1998-2004 & 4Runner 1996-2002
- Also Suits Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- Improved clearance to get around the spring bucket
- 80° of articulation in its ball joint
- SPC’s arm gives you maximum droop travel.
- SPC’s arms have +2° of caster built into them
- Arm will get you 0° to +4° of caster and ±2° of camber
- Maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming
- Installation Instructions
Rated 5.00 out of 5
(13 reviews)
$795.95 Add to cart
Sale!
4Runner 4th Gen (2003-2009)
On Sale All November!!
Dobinsons Tubular UCA Pair | 4Runner FJ GX470 GX460 – No Ball Joints
- Set of upper control arms for both left and right hand side, includes OE style rubber frame bushings and washers
- Uses OE replacement ball joints – not included in this page
- NOTE: This set DOES NOT INCLUDE ANY BALL JOINTS – you can buy your own OEM replacements and install them
- Has 3 degrees of caster built in, no adjustability or settings required
- Has more clearance around the ball joint than factory UCA’s for better tire clearance
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Works for any lift height, as factory alignment correction will be enhanced with these
- Curved washers face outwards away from bushings during installation, per the product video
- Product Video
- Includes left and right arms, ball joint caps, and hardware to mount ABS lines
- Also available with ball joints installed, here
- Replacement Ball Joints can be ordered here
Rated 5.00 out of 5
(8 reviews)
Original price was: $575.00.Current price is: $488.75. Add to cart
SPC
FREE SHIPPING
within 48 US States
Take 10% off with Coupon
Code "BLACKFRIDAY"!!
SPC 25485 | UCA’s for 2001-07 Sequoia & 1999-06 Tundra Pair
- Suits 2001-07 Toyota Sequoia & 1999-06 Toyota Tundra
- Improved clearance to get around the spring bucket
- 80° of articulation in its ball joint
- SPC’s arm gives you maximum droop travel.
- SPC’s arms have +1° of caster built into them
- Arm will get you 0° to +4° of caster and ±2° of camber
- Maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming
- Installation Instructions
Rated 5.00 out of 5
(11 reviews)
$895.96 Add to cart
Sale!
Upper Control Arms
On Sale All November!!
Pair of UCA Pivot Bolts and Nuts | Toyota and Lexus
- This is a pair of factory size upper control arm pivot bolts and nuts replacements to service two control arms
- Commonly referred to “as the long UCA bolt”
- Services both control arms at once
- Does not come with any washers. New aftermarket UCA’s usually come with the necessary washers
- Vehicle Fitment
- 2003-2009 Toyota 4Runner
  
  2010-2024 Toyota 4Runner
  
  2005-2015 Toyota Tacoma
  
  2016-2023 Toyota Tacoma
  
  2006+ FJ Cruiser (all years)
  
  2003-2009 Lexus GX470
  
  2010-2023 Lexus GX460
  
  Toyota Hilux Vigo
  
  Toyota Hilux Revo
  
  Toyota Fortuner
  
  Toyota Prado 120
  
  Toyota Prado 150
- Bolt Grade: 10.9
- Head Drive Type: Hex
- Length: 351 mm
- Material: Steel
- SAE or Metric: Metric
- Thread Diameter: 14 mm
- Thread Length: 28.7 mm
- Thread Size: 14 mm
- Thread Type: Fine
Rated 5.00 out of 5
(4 reviews)
Original price was: $69.00.Current price is: $58.65. Add to cart
SPC
FREE SHIPPING
within 48 US States
Take 10% off with Coupon
Code "BLACKFRIDAY"!!
SPC 25455 | UCA’s for Land Cruiser 100 Series & LX470 Pair
- Suits 1998-2007 Toyota Landcruiser 100 Series and 1998-2007 Lexus LX470
- Compatible with or without AHC
- Improved clearance to get around the spring bucket
- 80° of articulation in its ball joint
- SPC’s arm gives you maximum droop travel.
- SPC’s arms have +1° of caster built into them
- Arm will get you 0° to +4° of caster and ±2° of camber
- Maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming
- Installation Instructions
- We offer replacement ball joints as well
Rated 5.00 out of 5
(13 reviews)
$849.96 Add to cart
Dirt King Fabrication
FREE SHIPPING
within 48 US States
Dirt King Toyota Tacoma Tubular Ball Joint UCA’s Pair for 2005-2023
- Suits 2005-2023 model Toyota Tacoma 2nd and 3rd Gens – 6 Lug models only
- CAD designed
- Formed steel bushing gussets
- Constructed with 4130 chromoly tubing
- Preassembled with heavy duty Moog ball joints for fast installation
- Probearing Pro 2 Series bushings (new for 2024)
- Maintenance Free Bushings
- Zinc plated components for corrosion resistance
- Professionally MIG welded
- Powder coated black
- Includes Ball Joint Caps
- Installation Instructions
- Proudly made in the USA
Rated 5.00 out of 5
(4 reviews)
$734.02 Add to cart
SPC
FREE SHIPPING
within 48 US States
Take 10% off with Coupon
Code "BLACKFRIDAY"!!
SPC 25465 | UCA’s for Land Cruiser 200 Series & LX570 Pair
- Suits all Toyota Land Cruiser 200 Series and Lexus LX570 models – 2008-2021
- Improved clearance to get around the spring bucket
- 80° of articulation in its ball joint
- SPC’s arm gives you maximum droop travel.
- SPC’s arms have +1° of caster built into them
- Arm will get you 0° to +4° of caster and ±2° of camber
- Maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming
- Installation Instructions
- We offer replacement ball joints as well
Rated 5.00 out of 5
(10 reviews)
$895.96 Add to cart
Sale!
Upper Control Arms
On Sale All November!!
Dobinsons Billet Aluminum UCA’s Pair | Nissan Frontier Xterra Pathfinder
- Super strong billet aluminum front upper control arms (UCA’s) for Nissan D40 and D41 platforms
- Suits 2005-2021 Nissan Frontier, 2022-Present Nissan Frontier, 2005-2015 Nissan Xterra, 2005-2012 Nissan Pathfinder R51
- Complete kit for both left and right hand side
- OE-style sealed ball joints for a maintenance free life
- OE-style high quality rubber bushings for maximum NVH dampening and longevity
- No greasing or maintenance required at all, completely noise-free operation
- Adjustable on-vehicle for quick and easy alignment.
- Adjustable Camber and Caster for perfecting the vehicle’s handling
- O-ring sealed ball joint cap for protection against the elements
- Works for any lift height of 1.5″ or more
- Includes detailed instructions
- We recommend visiting an offroad specific shop for alignment, a regular alignment shop may not be able to adjust and align properly due to the added adjustability these arms offer
Rated 5.00 out of 5
(6 reviews)
Original price was: $1,195.00.Current price is: $1,015.75. Add to cart
Sale!
Upper Control Arms
FREE SHIPPING
within 48 US States
On Sale All November!!
Icon Tubular UCA DJ Pro Pair for 22-24 Tundra + 23-24 Sequoia
- Suits 2022-2024+ Tundra and 2023-2024+ Sequoia 4×4 Models with 1.75+ of lift over a base model
- Built in added caster for better handling on lifted vehicles
- Delta Joint PRO allows maximum articulation without binding
- Delta Joint PRO is 100% serviceable and rebuildable
- Serviceable dual stage pivot bushings
- CNC machined housings for bushings and Delta Joint PRO
- 1026 DOM tube construction with black powder coat finish
- Includes billet dust caps for Delta Joint PRO
- Installation Guide
- Warranty Info
Rated 5.00 out of 5
(11 reviews)
Original price was: $879.95.Current price is: $748.00. Add to cart
Sale!
100 Series Land Cruiser IFS (1998-2007)
On Sale All November!!
Dobinsons Tubular UCA Pair | Land Cruiser 100 LX470 – No Ball Joints
- For Toyota Land Cruiser 100 Series and Lexus LX470 1998-2007 models
- This purchase does not include any ball joints. Use OEM or aftermarket OE sized upper ball joints
- Not compatible with AHC, it does not have the bracket in place
- Includes both left and right hand side arms, OE style rubber frame bushings installed in the arms, all joint caps, and washers
- Has 3 degrees of caster built in, no adjustability or settings required
- Has more clearance around the ball joint than factory UCA’s for better tire clearance
- Made from HSLA (High Strength Low Alloy) Steel
- 5mm (0.2″) wall thickness
- Powder coated black
- Product Video
- Also available with ball joints installed, here
- Replacement Ball Joints can be ordered here
Rated 5.00 out of 5
(8 reviews)
Original price was: $575.00.Current price is: $488.75. Add to cart
Sale!
Tundra 3rd Gen (2022-2024)
On Sale All November!!
Dobinsons Adjustable Rear Upper Trailing Arms Pair | WA59-571K
- Suits Toyota Tundra 2022+, Sequoia 2023+, Land Cruiser 250 Series 2024+, and Tacoma 2024+
- Fully adjustable to properly set the length and pinion angle
- On car adjustable with a left hand threaded side (Silver Nut) and a right hand threaded side (Gold Nut)
- Comes installed with high quality rubber OE style bushings for maximum flexibility and longevity
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Oversized adjusters and rod thickness for maximum strength and durability with nut locking feature
- Zinc plated, then powder coated black, for the ultimate finish and protection
- **Not suitable for vehicles with rear height sensors (attached to OEM arms)
- Trailing arms DO NOT have headlight adjustment bracket
- Instructions written down below in the description
Rated 5.00 out of 5
(4 reviews)
Original price was: $345.00.Current price is: $293.25. Add to cart
Sale!
Upper Control Arms
FREE SHIPPING
within 48 US States
On Sale All November!!
Dobinsons Billet Aluminum UCA’s Pair | 07-21 Tundra and 08-22 Sequoia
- Super strong billet aluminum front upper control arms (UCA’s)
- Suits 2007-2021 Toyota Tundra and 2008-2022 Toyota Sequoia
- Complete kit for both left and right hand side
- OE-style sealed ball joints for a maintenance free life
- OE-style high quality rubber bushings for maximum NVH dampening and longevity
- No greasing or maintenance required at all, completely noise-free operation
- Adjustable on-vehicle for quick and easy alignment.
- Adjustable Camber and Caster for perfecting the vehicle’s handling
- O-ring sealed ball joint cap for protection against the elements
- Works for any lift height of 1.5″ or more
- *Must reuse OEM Washers
- Installation Instructions
- We recommend visiting an offroad specific shop for alignment, a regular alignment shop may not be able to adjust and align properly due to the added adjustability these arms offer
- Photos for illustration purposes
Rated 5.00 out of 5
(12 reviews)
Original price was: $1,195.00.Current price is: $1,015.75. Add to cart
Sale!
Upper Control Arms
FREE SHIPPING
within 48 US States
On Sale All November!!
Icon Tubular UCA DJ Pair for 96-02 4Runner + 95-04 Tacoma
- Suits 1996-2002 Toyota 4Runner and 1995-2004 Toyota Tacoma 4×4 (6 lug models)
- Suits Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- Direct bolt-in design makes for a simple and straightforward installation
- Patented Delta Joint (U.S. Pat. 10,731,700) combines the durability and weather resistance of a ball joint with the performance characteristics of a uniball
- CNC machined steel taper adapter
- 1026 DOM steel construction
- CNC bent and notched tubing
- Serviceable dual stage bushings
- CNC machined bushing housings and sleeves
- Built-In caster correction
- Black semi-gloss powder coat finish
- Delta Joint upper control arms carry ICON’s exclusive 5 year limited warranty when used in a complete ICON suspension system
- Installation Guide
- Warranty Info
Rated 5.00 out of 5
(7 reviews)
Original price was: $849.95.Current price is: $722.00. Add to cart
Sale!
200 Series Land Cruiser (2008-2021)
On Sale All November!!
Dobinsons Adjustable Rear Upper Trailing Arms Pair | Land Cruiser 200 Series
- Suits Toyota Land Cruiser 200 Series (2008-2021) and Lexus LX570 (2008-2021)
- Fully adjustable to properly set the length and pinion angle
- Comes installed with high quality rubber OE style bushings for maximum flexibility and longevity
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Oversized adjusters and rod thickness for maximum strength and durability with nut locking feature
- Zinc plated, then powder coated black, for the ultimate finish and protection
- Instructions written down below in the description
Rated 5.00 out of 5
(4 reviews)
Original price was: $345.00.Current price is: $293.25. Add to cart
4Runner 5th Gen (2010-2024)
FREE SHIPPING
within 48 US States
Dirt King Boxed UCA’s Pair with Uniballs – FJ Cruiser 4Runner GX470 GX460
- Proudly made in the USA
- CAD designed, Boxed plate construction, Professionally MIG welded
- 4130 chromoly uniball cups, 1” FK uniballs, 17-4 stainless steel misalignment spacers
- Military grade F911 hardware, Brushed stainless steel logo plates
- Preassembled for fast installation
- Grease fitting ports for easy servicing of bushings
- Zinc plated components for corrosion resistance
Rated 5.00 out of 5
(4 reviews)
$832.02 Add to cart