Your cart is currently empty!
250 Series Land Cruiser (2024+)
Showing 1–30 of 34 resultsSorted by popularity
-
Full Suspension Kits - LC250 (2)
-
Skid Plates - LC250 (4)
-
Shocks + Struts - LC250 (6)
-
Coil Springs - LC250 (8)
-
Control Arms - LC250 (8)
-
Bump Stops - LC250 (4)
-
Performance Upgrades - LC250 (5)
-
Bump Stops & SpacersFREE SHIPPING
within 48 US StatesDobinsons BS59-560 Front Adjustable Bump Stop Pair
- Adjustable front soft hit bump stop made from high quality rubber
- Suits 0-30mm Extension
- The BS59-560 rubber only is 1-3/8″ (35mm) thick, and the included spacers are 5, 10, 20mm
- Sold as a pair, replacing two front bump stops
- Ideal for those who bottom out often in their offroad driving
- Suits Tacoma, 4Runner, GX470, GX460, 200 Series & more (see below for full vehicle list)
- Installation Instructions
(10 reviews) -
Dobinsons
Dobinsons Adjustable Rear Sway Bar Link Pair | SE59-591
- Suits the rear of Toyota Tundra 2022+, Toyota Sequoia 2023+, Toyota Tacoma 2024+, Toyota Land Cruiser 300 Series 2022+, Lexus GX550, Toyota Land Cruiser 250 Series 2024+
- Order 1 for 1 vehicle (sold as a pair)
- Heavy Duty, zinc plated, with high quality ball joint ends for long life
- Kit includes 2 sway bar links, everything as shown in the photo, enough for 1 vehicle
- Adjustable length to suit lift heights of 1″ to 4″
- Watch a video here to see more about how this style of link adjusts: https://youtu.be/lZACSaE2PHI
- Photo is of the product installed on a 2022 Tundra
(5 reviews) -
200 Series Land Cruiser (2008-2021)
Dobinsons Rear Adjustable Panhard Rod Track Bar | Land Cruiser 200 250 300
- Suits Toyota Land Cruiser 200 Series 2008-2021, Toyota Tundra 2022+ and Toyota Sequoia 2023+, and Toyota Land Cruiser 300 Series 2022+, and 2024+ Toyota Land Cruiser 250 Series
- Replaces OE Rear Panhard Rod, adjustable to suit lift height
- Zinc plated steel and E-coated with high quality rubber bushes supplied
- Off-car adjustable, cannot be set while fully installed
- For 35mm (1.25″) of lift or more
- Rubber Bushes installed and offer greater flexibility than polyurethane, providing maximum articulation
- Panhard rod measures 41″ compressed and can be extended up to 44″ eye to eye
(5 reviews) -
Bump Stops & SpacersFREE SHIPPING
within 48 US StatesTimbren Active Off Road Rear Bump Stops | Tundra Sequoia LC250 Tacoma
- Suits the Rear of 2022-2024+ Toyota Tundra, 2023-2024+ Sequoia, 2024+ Land Cruiser 250, 2024+ Tacoma with coil springs
- Active Off-Road Bumpstops provide off-road enthusiasts greater control over their vehicles’ suspension travel. Using progressive-rate springs means that instead of a hard stop at the end of axle travel the axle energy will be absorbed when bottoming-out producing smooth, predictable, and quiet axle engagement and disengagement.
- Unlike OEM bump stops, Active Off-Road Bumpstops are made from natural rubber. Just like our Timbren SES line, Active Off-Road Bumpstops carry a lifetime warranty and a satisfaction guarantee.
- ABSTORTNDR replaces the rear OEM bump stops on the 2022 Toyota Tundra. Upgrade to Active Off-road Bumpstops and experience the difference.
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation
- Satisfaction Guarantee
- Lifetime Warranty
- Installation Instructions
(15 reviews) -
200 Series Land Cruiser (2008-2021)
Dobinsons Adjustable Rear Lower Control Arms Pair | WA59-547K
- Suits all 200 Series Land Cruisers from 2008-2021, 300 Series Land Cruiser, 2023+ Toyota Sequoia, 2024+ Land Cruiser 250 Series
- Comes with high quality rubber OE style bushings installed for maximum flexibility, and zero noise
- Made from HSLA (High Strength Low Alloy) Steel
- 40mm OD and 6mm wall thickness with support brace
- Oversized adjusters and rod thickness for maximum strength and durability with double-nut locking feature
- Zinc plated, then E-coated black, for the ultimate finish and protection
- Sold as a pair
(4 reviews) -
Sequoia 3rd Gen (2023-2024+)
Dobinsons C59-817V Rear Coil Springs Pair
- Dobinsons C59-817V Rear Coils for the 2023+ Toyota Sequoia (stock height) and 2021+ Land Cruiser 300 Series (10mm lift)
- On a Sequoia, these are Stock Height coils with Stock Weight on a standard model (not for TRD Pro)
- 2024+ Land Cruiser 250 – 40mm(1.6″) Lift with 175-330LBS constant rear added weight
- 2024+ Tacoma 3.0″ lift with stock weight, 2.25″ lift with 100lbs constant added weight, 1.25″ lift with 175-330lbs constant weight added.
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- Variable Rate Coils
- Longer shocks are recommended
- Select from Twin Tube, IMS Monotube or MRA 3-Way Adjustable with Remote Resi
(12 reviews)$270.00 Select options This product has multiple variants. The options may be chosen on the product page -
Tundra 3rd Gen (2022-2024)
Dobinsons Adjustable Rear Upper Trailing Arms Pair | WA59-571K
- Suits Toyota Tundra 2022+, Sequoia 2023+, Land Cruiser 250 Series 2024+, and Tacoma 2024+
- Fully adjustable to properly set the length and pinion angle
-
On car adjustable with a left hand threaded side (Silver Nut) and a right hand threaded side (Gold Nut)
- Comes installed with high quality rubber OE style bushings for maximum flexibility and longevity
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Oversized adjusters and rod thickness for maximum strength and durability with nut locking feature
- Zinc plated, then powder coated black, for the ultimate finish and protection
- **Not suitable for vehicles with rear height sensors (attached to OEM arms)
- Trailing arms DO NOT have headlight adjustment bracket
- Instructions written down below in the description
(4 reviews) -
Sequoia 3rd Gen (2023-2024+)
Dobinsons C59-821V Rear Coil Springs Pair
- Dobinsons C59-821V Rear Coils for the 2023+ Toyota Sequoia, 2022+ Land Cruiser 300 Series and 2024+ Land Cruiser 250 Series
- Lifts 2″ with Stock Weight on a standard model, 1″ with 220-440LBS constant added weight, and 1″ with stock weight on a TRD Pro (TRD Pro comes 1″ lifted from the factory)
- Also suits 2021+ Land Cruiser 300 Series, gives 30mm lift with 220-440LBS constant added weight.
- Also suits 2024+ Land Cruiser 250 – 2.0″ Lift with 990-1200LBS constant rear added weight
- Also suits the 2024+ Toyota Tacoma – 2.25″ lift with 440-660lbs constant weight added, 1.25″ lift with 880-1210lbs constant weight added
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- Variable Rate Coils
- Longer shocks required, the factory shocks are not long enough to run with these coils
- Select from Twin Tube, IMS Monotube or MRA 3-Way Adjustable with Remote Resi
(4 reviews)$270.00 Select options This product has multiple variants. The options may be chosen on the product page -
Sequoia 3rd Gen (2023-2024+)
Dobinsons C59-819V Rear Coil Springs Pair
- Dobinsons C59-819V Rear Coils for the 2023+ Toyota Sequoia and 2022+ Land Cruiser 300 Series (30mm lift)
- Lifts the Sequoia 1.0″ with Stock Weight on a standard model and 0″ with stock weight on a TRD Pro (TRD Pro comes 1″ lifted from the factory)
- Also suits 2024+ Land Cruiser 250 – 1.6″ Lift with 550-770LBS constant rear added weight
- Suits 2024+ Tacoma – 2.25″ lift with 175-330lbs constant weight added, 1.25″ lift with 440-660lbs constant weight added.
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- Variable Rate Coils
- Longer shocks are necessary at this lift height
- Select from Twin Tube, IMS Monotube or MRA 3-Way Adjustable with Remote Resi
(15 reviews)$270.00 Select options This product has multiple variants. The options may be chosen on the product page -
Sequoia 3rd Gen (2023-2024+)FREE SHIPPING
within 48 US StatesDobinsons IMS59-60441 2.6″ IFP Rear Shocks Pair
- Suits 2023+ Toyota Sequoia with 2-3″ of lift using Dobinsons Coils
- Also suits 2021+ Toyota Land Cruiser 300 Series and 2024+ Land Cruiser 250 Series
- SOLD IN PAIRS
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- 22mm / 7/8″ shaft diameter on rear shocks
- 680mm extended, 422mm compressed
- Full 2 year limited warranty, no set rebuild time period
(17 reviews) -
Bump Stops - Tundra 2022+FREE SHIPPING
within 48 US StatesTimbren Bump Stops Front & Rear | Tundra Sequoia LC250
- Suits the 2022-2024+ Toyota Tundra, 2023-2024+ Sequoia, 2024+ Land Cruiser 250
- Includes both Front and Rear bump stops for the whole vehicle
- Active Off-Road Bump stops provide off-road enthusiasts greater control over their vehicles’ suspension travel. Using progressive-rate springs means that instead of a hard stop at the end of axle travel the axle energy will be absorbed when bottoming-out producing smooth, predictable, and quiet axle engagement and disengagement.
- Unlike OEM bump stops, Active Off-Road Bumpstops are made from natural rubber. Just like our Timbren SES line, Active Off-Road Bumpstops carry a lifetime warranty and a satisfaction guarantee.
- ABSTORTNDR replaces the rear OEM bump stops and ABSTOF replaces the fronts
- Upgrade to Active Off-road Bump stops and experience the difference
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation
- Satisfaction Guarantee
- Lifetime Warranty
- Front Instructions and Rear Instructions
(12 reviews) -
Sequoia 3rd Gen (2023-2024+)FREE SHIPPING
within 48 US StatesDobinsons MRA59-A441 2.6″ 3-Way Adjustable Rear Shocks Pair
- Suits 2023+ Toyota Sequoia with 2-3″ of lift using Dobinsons Coils
- Also suits 2021+ Toyota Land Cruiser 300 Series and 2024+ Land Cruiser 250 Series
- 3-way adjustable valving – Adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Specifications – 680mm extended, 422mm compressed
- SOLD IN PAIRS
- Includes Reservoir Brackets and Hardware, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
(15 reviews) -
250 Series Land Cruiser (2024+)ETA is Spring 2025
Dobinsons C59-883V Rear Coil Springs Pair
- Lifts the Rear of a 2024+ Toyota Land Cruiser 250 series 10mm (0.4″)
- This Variable Rate Coil Allows Less Height Change and Provides a Firmer Ride When Loaded
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(0 reviews)$270.00 Select options This product has multiple variants. The options may be chosen on the product page -
250 Series Land Cruiser (2024+)ETA is Spring 2025
Dobinsons C59-882 Front Coil Springs Pair
- Lifts the front of a 2024+ Toyota Land Cruiser 250 series 2.0″ with stock weight with the 2.4L or 2.7L gas engine.
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(0 reviews)$270.00 Select options This product has multiple variants. The options may be chosen on the product page -
250 Series Land Cruiser (2024+)FREE SHIPPING
within 48 US StatesDobinsons IMS59-60660 2.6″ IFP Front Struts Pair | 2024+ Land Cruiser 250
- Suits Toyota Land Cruiser 250 Series 2024+
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- 22mm / 7/8″ shaft diameter on front struts
- Full 2 year limited warranty, no set rebuild time period
- Standard coil seat height should be set to 237mm (9.3″) from the center of the lower hole to the base notch where the coil sits
- SOLD IN PAIRS
- Shocks do not suit any models that have factory electronic adjustable Shock Absorbers
- Photos for illustration purposes only
(0 reviews) -
ExceptionsFREE SHIPPING
within 48 US StatesDobinsons Rear Adjustable Hydro Bump Stop Kit | LC 200 250 300 Sequoia
- Complete hydro bump stop kit to replace the factory coil isolator and internal bump stop
- Suits the Rear of Toyota Land Cruiser 200 Series and Lexus LX570 2008-2021 and 2022+ Land Cruiser 300 Series, 2024+ Land Cruiser 250 Series, 2023+ Toyota Sequoia
- CNC Machined 50mm Billet Aluminum Piston
- EDP Coated 3mm Thick 56mm Steel Body
- Threaded Body For Height Adjustment to adjust when the stop will engage
- Supplied with both Interchangeable Super Quiet Rubber Rod End & Hard Nylon
- 30mm Micro Polished Hard Chrome Shaft
- Slow Rebound Valving To Prevent Bucking
- Removable Dust Cover Boot For Stealth Appearance
- Fully Rebuildable & Tunable
- O-Ring Travel Indicator
- Heavy Duty Extreme-Race style Triple Seal Design
- Nitrogen Gas Charged & Tunable (100 to 300 PSI)
- Pre-charged to 110 PSI
- Extra Short Dead Lengths For Compact Fitment
- Includes full fit kit, 2 hydro bump stops, and spacer blocks for frame-mounted external bump stops
- Kit Includes:
- HBS59-013FK Mounting Kit
- HBS56-009 Hydraulic Bump Stops
- 46mm – 1.8″ stroke, 105mm – 4″ thread length, 188mm – 7.4″ extended length, 142mm – 5.6″ compressed length
- Installation Instructions
(7 reviews) -
Skid Plates - LC250
RCI Land Cruiser 250 Catalytic Guards | 2024-2025
- Suits Toyota Land Cruiser 250 from 2024+
- Covers open space between frame and transmission skid plate
- Compatible with both steel and aluminum RCI transmission skid plates – REQUIRED
- Powder coated with a two stage primer and textured black powder coat for an extremely durable, high quality finish
- All hardware and installation instructions provided
- Installs in minutes
- Made in the USA
- INSTALL GUIDE (Click Here)
- Recommended to run in conjunction with the Engine Skid Plate and Transmission Skid Plate
- Transmission skid plate is REQUIRED in order to run these catalytic guards
- Please note, some images show the transmission skid plate that is necessary for installing the catalytic guards however the skid plate is not included with the catalytic guards
(0 reviews) -
Skid Plates - LC250
RCI Land Cruiser 250 Transfer Case Skid Plate | 2024-2025
-
- Suits Toyota Land Cruiser 250 from 2024+ and Hybrid 2024+ Tacoma TRD Pro DCSB Iforce Max
- Protects third cross-member, transfer-case, and exhaust pipe
- Reinforced edges between cross-members for maximum strength and rigidity
- Smooth, flat surface that easily slides over obstacles
- Black powder coat available for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Compatible with Hybrid Model
- Made in the USA
- INSTALL GUIDE (Click Here)
- Recommended to run in conjunction with the Engine Skid Plate and Transmission Skid Plate
(0 reviews) -
-
Skid Plates - LC250
RCI Land Cruiser 250 Transmission Skid Plate | 2024-2025
-
- Suits Toyota Land Cruiser 250 from 2024+ and Hybrid 2024+ Tacoma TRD Pro DCSB Iforce Max
- Protects transmission, second and third cross-members
- Service openings for maintenance without removal
- Reinforced edges between cross-members for maximum strength and rigidity
- Smooth, flat surface that easily slides over obstacles
- Black powder coat available for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Compatible with Hybrid model
- Made in the USA
- INSTALL GUIDE (Click Here)
- Recommended to run in conjunction with the Engine Skid Plate
(0 reviews) -
-
Skid Plates - LC250
RCI Land Cruiser 250 Engine Skid Plate | 2024-2025
- Suits Toyota Land Cruiser 250 from 2024+
- Protects front two cross-members, low hanging front differential, and oil pan
- Service openings for easy service and oil changes without removal
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Smooth, flat surface that easily slides over obstacles
- Black powder coat available for rust resistant, durable and high quality finish
- Utilizes Center mounting points for maximum strength whether steel or aluminum
- Installs in minutes
- All hardware provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Made in the USA
- INSTALL GUIDE (Click Here)
(0 reviews) -
250 Series Land Cruiser (2024+)FREE SHIPPING
within 48 US StatesDobinsons 2-3″ MRA 3-Way Adjustable Lift Kit | Land Cruiser 250 2024+
- Suits 2024+ Toyota Land Cruiser 250 4×4 Models
- These specs are based on the 2.4L and 2.7L 4Cyl Engine models
- Choose from 2 or 3″ of front lift, and 0.5″-2″ of rear lift, based on accessory weight. The more you lift, the more parts you’ll need
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Remote Reservoir 3-way adjustable Shocks, Superior Design, thicker walls, longer travel
- Adjust high and low speed compression (HSC and LSC) and rebound adjustment front and rear
- Massive 66mm (2.6″) body size with 60mm pistons front and rear
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen in the external reservoir
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Does not suit air suspension equipped models
- Coil seat for MRA59-A660 should be set at 237mm (9.3″) from the strut bushing eye
- Front MRA struts assembly instructions
- This kit is also available with non-adjustable internal resi (IMS) Struts and Shocks – Here
(0 reviews) -
250 Series Land Cruiser (2024+)FREE SHIPPING
within 48 US StatesDobinsons 2-3″ IMS Lift Kit | Land Cruiser 250 2024+
- Suits 2024+ Toyota Land Cruiser 250 4×4 Models
- These specs are based on the 2.4L and 2.7L 4Cyl Engine models
- Choose from 2 or 3″ of front lift, and 0.5″-2″ of rear lift, based on accessory weight. The more you lift, the more parts you’ll need
- Fully rebuildable and re-valvable IMS monotube shocks
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- Front IMS struts for this application have multiple clip heights to adjust ride height if needed
- Full 2 year limited warranty, no set rebuild time period
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Does not suit air suspension equipped models
- Coil seat height should be set at 237mm (9.3″) from the strut bushing eye
- Front IMS struts assembly instructions
- This kit is also available with 3-Way Adjustable Remote Resi Struts and Shocks – Here
(0 reviews) -
250 Series Land Cruiser (2024+)ETA is Spring 2025
Dobinsons C59-885V Rear Coil Springs Pair
- Lifts the Rear of a 2024+ Toyota Land Cruiser 250 series 40mm (1.6″) with stock weight up to 110LBS of added weight
- These variable rate coils handle loaded weight better than a liner coil, as they get stronger when they get compressed further
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(0 reviews)$270.00 Select options This product has multiple variants. The options may be chosen on the product page -
250 Series Land Cruiser (2024+)ETA is Spring 2025
Dobinsons C59-816 Front Coil Springs Pair
- Lifts the front of a 2024+ Toyota Land Cruiser 250 series 2.0″ with 150-220 constant front end weight (bumper, winch, etc) with the 2.4L or 2.7L gas engine.
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(0 reviews)$270.00 Select options This product has multiple variants. The options may be chosen on the product page -
250 Series Land Cruiser (2024+)ETA is Spring 2025
Dobinsons Strut Mounts Pair for Toyota Land Cruiser 250 2024+
- Made specifically for the 4×4 Toyota Land Cruiser 250 Series 2024-2025+
- Designed to exact OE specs, using all new rubber bushes, washers and seats
- New zinc coated hardware for corrosion resistance
- Allows faster assembly of new components, not needing to disassemble used parts
- Enough for 1 vehicle, sold in pairs
- Photo for illustration purposes
(0 reviews) -
250 Series Land Cruiser (2024+)FREE SHIPPING
within 48 US StatesDobinsons MRA59-A660 3-Way Adjustable Front Struts Pair | Land Cruiser 250
- Suits 2024+ Toyota Land Cruiser 250 Series
- Can be used with OEM coils or with Dobinsons lifted coils
- Height adjustable with a fully threaded body
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- SOLD IN PAIRS
- Full 2 year limited warranty, no set rebuild time period
- Does not include coil springs or top mounts – sold separately
- Must mount the banjo fitting and hose inwards on MRA struts
- Coil seat for MRA59-A660 should be set at 237mm (9.3″) from the strut bushing eye
- Photos for illustration purposes only
(0 reviews) -
Dobinsons
Dobinsons C59-818 Front Coil Springs Pair
- Suits Toyota Land Cruiser 300 Series – Stock Height / 110-220lb Constant Front End Load, and 2024+ Toyota Land Cruiser 250 Series – 3.0″ lift with stock weight, or 2.5″ lift with 110-220LBS constant added weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 420mm free height, 18mm wire diameter, 508 LBF/in spring rate
- Sold in Pairs
(0 reviews)$270.00 Select options This product has multiple variants. The options may be chosen on the product page -
300 Series Land Cruiser (2021+)FREE SHIPPING
within 48 US StatesDobinsons MRA59-A440 3-Way Adjustable Front Struts Pair | LC250 LC300 LX600
- Suits 2022+ Toyota Land Cruiser 300 Series (not sold in the USA) and Lexus LX600, and is an Extended Travel option for 2024+ Land Cruiser 250 Series
- Can be used with OEM coils or with Dobinsons lifted coils
- Height adjustable with a fully threaded body
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- SOLD IN PAIRS
- Full 2 year limited warranty, no set rebuild time period
- Does not include coil springs or top mounts – sold separately
- Must mount the banjo fitting and hose inwards on MRA struts
- Coil seat for MRA59-A440 should be set at 237mm (9.3″) from the strut bushing eye
- Specifications – 624mm extended, 453mm compressed
- Photos for illustration purposes only
- Installation Instructions
- Note: If installed on a Toyota Land Cruiser 250 Series, a diff drop kit and aftermarket UCA’s must be run to prevent CV bind and coil spring contact at full droop
(0 reviews) -
Tacoma 4th Gen (2024+)FREE SHIPPING
within 48 US StatesIcon Billet UCA DJ Pro Pair for 2024+ Tacoma + Land Cruiser 250
- Suits 2024+ Toyota Toyota Tacoma and Land Cruiser 250
- CNC machined 6061 billet aluminum construction with satin anodized finish
- Corrects suspension geometry and allows for proper wheel alignment on Tacomas or Land Cruisers with up to 3” of lift
- Quick, precise, on-vehicle adjustment for both caster and camber
- Delta Joint PRO allows maximum articulation without binding
- Delta Joint PRO is 100% serviceable and rebuildable
- FK Rod Ends at chassis pivots for strength and precision driving characteristics
- Built in O-ring sealed dust cover cap
- Installation Manual
- Warranty Info
(0 reviews) -
Upper Control ArmsFREE SHIPPING
within 48 US StatesIcon Tubular UCA DJ Pro Pair for 2024+ Tacoma + Land Cruiser 250
- Suits 2024+ Toyota Toyota Tacoma and Land Cruiser 250
- Features patented ICON Delta Joint (U.S. Pat. 10,731,700)
- Built in added caster for better handling on lifted vehicles
- Delta Joint PRO allows maximum articulation without binding
- Delta Joint PRO is 100% serviceable and rebuildable
- Serviceable dual stage polyurethane pivot bushings
- CNC machined housings for bushings and Delta Joint PRO
- 1026 DOM tube construction with black powder coat finish
- Includes billet dust caps for Delta Joint PRO
- Warranty Info
(0 reviews)
