Land Cruiser

Showing 421–434 of 434 resultsSorted by popularity

80 Series Land Cruiser (1990-1997)
FREE SHIPPING
within 48 US States
Dobinsons 6″ Lift 3-Way Adjustable MRA Kit | Land Cruiser 80 Series 1990-1997
- Suits Land Cruiser 80 Series and Lexus LX450
- Kit requires additional parts for this lift height, see below
- **Kit photo shows additional options purchased**
- Coils are specifically suited to match lift height and added weight
- 3-way adjustable valving – Adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Installation Instructions of the MRA Shocks
- A double-cardan front drive shaft is required for any lift of 4″ or more on this vehicle – we don’t sell them
- All options are listed below. For a complete kit, one item from each drop down menu should be selected for a complete kit
Rated 5.00 out of 5
(12 reviews)
From $4,680.00 Select options
45 Series Land Cruiser - FJ45, HJ45 (pre 8/1980)
Dobinsons Rear Heavy Load Leaf Springs Pair for FJ45 HJ45 pre 8/1980 (30mm eyes)
- Rear Leaf Springs for the Toyota FJ45 HJ45 4×4 up to 8/1980 models and they give 40mm (1.6″) of lift with 440LBS of constant rear weight.
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Sold as a pair, includes 1 left and 1 right spring (different heights to correct lean)
Rated 5.00 out of 5
(2 reviews)
$860.00 Add to cart
Full Suspension Kits - FJ70 BJ70 BJ71 FJ73 BJ73 FJ74 BJ74
FREE SHIPPING
within 48 US States
Dobinsons 2.0″ 3-Way Adjustable MRA Suspension Kit | Land Cruiser FJ70 BJ70 BJ71 FJ73 BJ73 FJ74 BJ74
- Full 2″ MRA Suspension Kit Replacement for 1985-1989 Toyota Land Cruiser FJ70 BJ70 BJ71 FJ73 BJ73 FJ74 BJ74
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Select medium or heavy load leaf spring options
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- External Remote Oil Reservoir with dual speed compression adjustment
- Single Piece Lower Leg, Natural Rubber Bushings Top and Bottom
- Triple Lip Oil Seal for Superior Lifespan
- Direct Bolt-on, Fully Rebuildable Design
- Pre-Charged with Nitrogen, Ready to be Assembled and Installed
- EDP Surface Protection, 3mm Heavy Duty Wall Thickness
- Includes Universal Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Ships by Fedex ground, multiple packages (4 loose leaf springs and a box with everything else)
Rated 5.00 out of 5
(7 reviews)
From $4,035.00 Select options
On Backorder
FJ/BJ70, BJ71, FJ/BJ73, FJ/BJ74
Dobinsons HJ61-8L-R Rear Super Heavy Load Leaf Springs Pair
- Rear Leaf Springs for the Toyota FJ/BJ70, BJ71, FJ/BJ73, FJ/BJ74 4×4 from 1985 to 1989 and 70 Series – HZJ70, HZJ73, PZJ70, PZJ73 1990-1999
- 50mm rear lift with SUPER HEAVY rear end weight of 660LBS+
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Sold as a pair, includes 1 left and 1 right spring (different heights to correct lean)
Rated 5.00 out of 5
(6 reviews)
$570.00 Add to cart
Dobinsons
Dobinsons HJ61-7L-R Rear Heavy Load Leaf Springs Pair
- Rear Leaf Springs for the Toyota FJ/BJ70, BJ71, FJ/BJ73, FJ/BJ74 4×4 from 1985 to 1989
- 50mm rear lift with 330LBS of additional constant weight
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Sold as a pair, includes 1 left and 1 right spring (different heights to correct lean)
Rated 5.00 out of 5
(4 reviews)
$430.00 Add to cart
On Backorder
55 Series (1970-80)
Toyota FJ55 Series 1967-1980 Long Range Replacement Fuel Tank (55gal)
- Suits Toyota FJ55 Series Land Cruiser 1967-1980
- This is a replacement tank that replaces your OE fuel tank, it holds 55 gallons instead of the stock 23.8 gallons and fills the same way an OE tank fills
- 55 gallon capacity, replaces the original tank
- Suits gasoline or diesel fuel
- Tank fills using OEM gas door
- No Exhaust modification required
- Fitting time – approximately 3.5 hours
- THIS TANK IS A SPECIAL ORDER – ALLOW APPROX 4-6 MONTHS TO BRING FROM AUSTRALIA
- Fitting Instructions – Intended to be installed by a certified mechanic
- This item ships on a pallet to the nearest Truck Freight terminal for you to pickup. We will be in touch with you regarding the nearest freight terminal, unless you add home delivery.
- Special order tank, once an order has been placed, it cannot be cancelled.
- This product can not be sold or shipped to residents in California. Do not order this product if you live in California!!
- MADE IN AUSTRALIA
- Nearest Freight Terminal Finder – Use this to decide if you want home delivery or pickup at the nearest terminal
Rated 5.00 out of 5
(5 reviews)
$2,145.00 Select options
Differential | Drivetrain
FREE SHIPPING
within 48 US States
ARB RD152 Rear Air Locker Toyota 9.5″ 32 Spline
- For Use only with Toyota 9.5″ 12 Bolt 32 spline Rear Axle
- Suits multiple vehicles, the full list is down below
- Will not suit 5.7L Tundra engines, as they use a larger rear differential (RD146)
- At the flick of a dash-mounted switch, compressed air is delivered to the seal housing assembly via a nylon air line.
- Instantaneously go from an open differential to a fully locked differential at the flick of a switch for maximum traction
- Requires an Air Compressor for operation, Sold Separately
- Why do they use air? Air is used on every semi truck on the road to reliably operate their brakes through solenoids, and ARB uses the same technology. When installed correctly, it’s ultra-reliable!!
- The ARB Air Locker is a pneumatic locking differential that uses air to facilitate the locking of both axles. This action converts your differential from a conventional open to a full spool type axle supplying 100% power to both wheels to keep you going through the worst terrain.
- This Air Locker kit includes the full differential, instruction booklet, airline, fittings, switch and cover, and necessary seals. When combined with an Air Compressor and the original differential, you’ll have everything you need as far as parts go.
- Full specification sheet, including all included parts, CLICK HERE
- It’s recommended that a qualified differential mechanic do the installation for proper setup
- Covered by a full manufacturer’s 5 YEAR WARRANTY
Rated 5.00 out of 5
(16 reviews)
$1,113.95 Add to cart
Differential | Drivetrain
FREE SHIPPING
within 48 US States
ARB RD153 Rear Air Locker Toyota 12 Bolt Semi Float
- For Use With Toyota 12 Bolt Semi Float 30 Spline solid axle – used for many years in some rear applications
- Full vehicle fitment list is further down in the main description, includes Landcruiser 40, 42, 45, 47, 55, 60, 62, 70, 73, 74, 75 Series – be sure to check the list below before ordering!!
- At the flick of a dash-mounted switch, compressed air is delivered to the seal housing assembly via a nylon air line.
- Instantaneously go from an open differential to a fully locked differential at the flick of a switch for maximum traction
- Requires an Air Compressor for operation, Sold Separately
- Why do they use air? Air is used on every semi truck on the road to reliably operate their brakes through solenoids, and ARB uses the same technology. When installed correctly, it’s ultra-reliable!!
- The ARB Air Locker is a pneumatic locking differential that uses air to facilitate the locking of both axles. This action converts your differential from a conventional open to a full spool type axle supplying 100% power to both wheels to keep you going through the worst terrain.
- This Air Locker kit includes the full differential, instruction booklet, airline, fittings, switch and cover, and necessary seals. When combined with an Air Compressor and the original differential, you’ll have everything you need as far as parts go.
- Full specification sheet, including all included parts, CLICK HERE
- It’s recommended that a qualified differential mechanic do the installation for proper setup
- Covered by a full manufacturer’s 5 YEAR WARRANTY
Rated 5.00 out of 5
(12 reviews)
$1,113.95 Select options
Differential | Drivetrain
FREE SHIPPING
within 48 US States
ARB RD142 Air Locker Toyota 12 Bolt Full Float
- For Use With Toyota 12 Bolt Full Float 30 Spline solid axle – used for many years in some front and rear applications
- Full vehicle fitment list is further down in the main description, includes Landcruiser 40, 42, 45, 47, 55, 60, 62, 70, 73, 74, 75 Series – be sure to check the list below before ordering!!
- At the flick of a dash-mounted switch, compressed air is delivered to the seal housing assembly via a nylon air line.
- Instantaneously go from an open differential to a fully locked differential at the flick of a switch for maximum traction
- Requires an Air Compressor for operation, Sold Separately
- Why do they use air? Air is used on every semi truck on the road to reliably operate their brakes through solenoids, and ARB uses the same technology. When installed correctly, it’s ultra-reliable!!
- The ARB Air Locker is a pneumatic locking differential that uses air to facilitate the locking of both axles. This action converts your differential from a conventional open to a full spool type axle supplying 100% power to both wheels to keep you going through the worst terrain.
- This Air Locker kit includes the full differential, instruction booklet, airline, fittings, switch and cover, and necessary seals. When combined with an Air Compressor and the original differential, you’ll have everything you need as far as parts go.
- Full specification sheet, including all included parts, CLICK HERE
- It’s recommended that a qualified differential mechanic do the installation for proper setup
- Covered by a full manufacturer’s 5 YEAR WARRANTY
Rated 5.00 out of 5
(12 reviews)
$1,113.95 Select options
40 Series Land Cruiser Late (1980-1984)
Dobinsons TOY-036-R Rear Leaf Springs Pair for 80+ FJ40 BJ40 35mm eyes – Heavy Load
- Suits 1980+ FJ40 and BJ40 models with 35mm eyes.
- Gives 45-50mm lift with 300LBS+ of constant rear weight
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Sold as a pair – bushings, u-bolts and all other parts sold separately
- Photo for illustration purposes only
Rated 5.00 out of 5
(2 reviews)
$430.00 Add to cart
40 Series Land Cruiser Late (1980-1984)
Dobinsons HJ47-7L-F Front Leaf Springs Pair for 1980+ FJ40 BJ40 35mm eyes
- Suits 1980+ Toyota Land Cruiser FJ40 BJ40 FJ45 HJ47 BJ45 BJ46 models with 35mm eyes
- Gives 45mm lift with 300LBS+ constant front end weight on a FJ40 and BJ40
- Gives 45mm lift stock weight on a FJ45 HJ47 BJ45 BJ46
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Sold as a pair – bushings, u-bolts and all other parts sold separately
- Photo for illustration purposes only
Rated 5.00 out of 5
(6 reviews)
$430.00 Add to cart
80 Series Land Cruiser (1990-1997)
Dobinsons C59-317 Rear Coil Springs | Land Cruiser 80 Series – Pair
- Suits Land Cruiser 80 Series and Lexus LX450
- C59-317 6″ lift with stock weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 560/570mm free height, 21mm wire, 303LBF/in rate
- Sold in Pairs
Rated 5.00 out of 5
(17 reviews)
$405.00 Add to cart
Armor
Dobinsons Front Deluxe Winch Bumper | Toyota Land Cruiser 200 Series 10/2015-2021
- Suits 10/2015-2021 Toyota Land Cruiser 200 Series and Lexus LX570
- Airbag and winch compatible, Driving Light Mounts, Heavy Duty Black Powder Coat Finish
- 3mm Thick Main Body, 4mm + 5mm Thick Bracket, 1.6mm Bash Plates, 51-76mm top tubes depending on vehicle
- Includes Turn Signals and all Required Hardware for Installation
- Separate Winch Cradle System, making installation faster
- Supplied Black, but can be painted by your paint shop. Suits 12000 LB Low Mount Winches
- We offer a large variety of Winches as well
- Ships to the nearest freight terminal on a pallet for you to pick up, unless you add home delivery. We will be in touch with that delivery address
Rated 5.00 out of 5
(6 reviews)
From $2,035.00 Select options
Armor
Dobinsons 200 Series Winch Bumper | Land Cruiser 200 Series 2012 to mid 2016
- Airbag and winch compatible
- Driving Light Mounts
- Heavy Duty Black Powder Coat Finish
- 3mm Thick Main Body, 4mm + 5mm Thick Bracketry, 1.6mm Bash Plates, 51-76mm top tubes depending on vehicle
- Includes Turn Signals and all Required Hardware for Installation
- Separate Winch Cradle System, making installation faster
- Supplied Black, but can be painted by your local paint shop
- Suits 10000 – 12000 LB Low Mount Winches
- We offer a large variety of Winches as well
- Ships to the nearest freight terminal for pickup, unless you add the home delivery fee below. We will be in touch to let you know the terminal location
Rated 5.00 out of 5
(6 reviews)
From $1,765.00 Select options