Land Cruiser

Showing 91–120 of 337 results

200 Series Land Cruiser (2008-2021)
Dobinsons 200 Series Land Cruiser 1.0-2.5″ Lift Kit (all options)
- Suits Toyota Land Cruiser 200 Series from 2008 to 2021 Models
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base kit Includes 2 Front Struts, 2 Rear Shocks, and 4 Coil Springs
- Coils springs are marked with white labels – DO NOT REMOVE – and they are also side specific!!
- FOR MRA STRUTS, BANJO FITTING ON LOWER STRUT FACES INWARDS TOWARDS ENGINE ON BOTH SIDES
- Reservoir mounting instructions for MRA struts, it’s the same for KDSS and non-KDSS
From $1,235.00 Select options
Replacement Bushings
Dobinsons Lower Strut Bushing – For -222 -220 -221 -782 -470
- Dobinsons replacement lower strut bushing
- Suits a variety of Dobinsons struts/shocks, part numbers ending in -222 -220 -221 -782 -470
- Full list of part numbers this fits is below
- This is for a single bushing only for 1 strut or shock
- High quality natural rubber bushing
- Photo for illustration purposes of the bushing type
$20.00 Add to cart
80 Series Land Cruiser (1990-1997)
Dobinsons C59-615V 4″ Flexi Rear Coil Springs | Land Cruiser 80 series
- 4″ lift with up to 200 LBS of additional accessory weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 570/580mm free height, 18mm wire, 175-275LBF/in variable rate
- Sold in Pairs
$405.00 Add to cart
Rear Bumpers
Dobinsons Toyota 100 Series Rear Bumper and Lexus LX470 with Tire and Jerry Can Carrier
- Suits all years sold in USA of the Land Cruiser 100 Series and Lexus LX470 (1998-2007)
- Comes standard as Black Powder Coat (some photos show a customer’s color-matched rear bumper)
- Stainless Steel Latch and Hardware
- Complete Kit with Everything Included
- All Lighting is 12V LED, requires splicing into original wiring harness (not plug and play)
- Works with Factory Tow Hitch in OE position
- Adjustable offset tire carrier head, suitable up to a 35″ tire
- Installation Page
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address
$2,860.00 Select options
40 Series Land Cruiser Early (1960-1979)
Dobinsons PB59-1013K Polyurethane Leaf Spring Bush Kit for FJ/BJ40 FJ40/BJ45 25mm Eyes
- Suits 40/45 Series Land Cruisers with 25mm spring eyes front and rear
- For any lift height, or no lift. These are OE replacement bushings.
- Use with Dobinsons Leaf Springs or any other brand that can accept OE-size bushings
- Pressing of OE bushings may be necessary during removal and installation
- Replaces OE bushings in all 6 positions of leaf springs in the front or rear
- Order 2 kits to do front and rear of the vehicle
- Greasable bolts are sold in pairs, sold separately
$85.00 Add to cart
Suspension
Ships FREE !!
within 48 US States
Dobinsons MRA59-A683 3-Way Adjustable MRA Front Shocks | 80 Series 0-3″ Lift
- Suits Toyota Land Cruiser 80 Series 1990-97, suitable for 0-3″ of lift
- 3-way adjustable valving – Adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Installation Instructions of the MRA Shocks
- 627mm extended, 385mm compressed
- Full 2 year limited warranty, no set rebuild time period
$1,350.00 Add to cart
200 Series Land Cruiser (2008-2021)
Ships FREE !!
within 48 US States
Dobinsons 200 Series Land Cruiser 1.0-2.5″ IMS Lift Kit
- Suits Toyota Land Cruiser 200 Series from 2008 to 2021 Models
- Complete IMS suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
- Coils springs are marked with white labels – DO NOT REMOVE – and they are also side specific!!
- Base kit Includes 2 Front IMS Struts, 2 Rear IMS Shocks, and 4 Coil Springs
From $1,945.00 Select options
200 Series Land Cruiser (2008-2021)
Dobinsons C59-544 2.5″ Land Cruiser 200 Series Front Coils
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 455/450mm free height, 19mm wire, 580LB rate
- Sold as a Pair
$270.00 Select options
On Backorder
80 Series Land Cruiser (1990-1997)
Dobinsons C59-269V Rear Coil Springs | Land Cruiser 80 Series
- c59-269v 1.75″ Comfort ride spring with only stock weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 480/490mm free height, 17mm wire, variable rate
- Sold in Pairs
$270.00 Add to cart
Firestone
Firestone 4164 Coil-Rite Rear Helper Air Springs (Airbags) | 200 Series and Sequoia
- Firestone 4164 Suits Toyota Landcruiser 200 Series and Lexus LX570 2008-2020, Toyota Sequoia 2008-2022 with coil springs in the rear
- Complete kit – 1 per vehicle
- Inserts inside your rear coil springs to add additional load support
- Manually inflate or deflate the air bags to add or remove support or height
- Perfect for people who tow, or regularly load up fully and need additional height or support
- Works with all Dobinsons rear coils for these vehicles
- Works with 0-1.5″ of lift
- Route the airlines to your rear bumper or a suitable place to easily add or remove air to the bags
- Installation Manual, Click Here
$144.12 Add to cart
200 Series Land Cruiser (2008-2021)
Dobinsons GS59-688 Pair of Front Struts for Land Cruiser 200 Series 2008-2021
- Suits all years of Toyota Land Cruiser 200 Series and Lexus LX570
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals
- Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings
- Double Chrome hardened rods
- Metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS59-688 Specifications: 600mm extended, 435mm compressed, 60mm body size
$350.00 Add to cart
100 Series Land Cruiser IFS (1998-2007)
Dobinsons GS59-786 Ext Travel Front Shocks | Land Cruiser 100 Series (2-2.5″ lift)
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- **Photo for illustration purposes, not of actual shocks
- These shocks REQUIRE aftermarket UCA’s and a complete Diff Drop Kit
$310.00 Add to cart
60 62 Series Land Cruiser (1980-1989)
Dobinsons Full 2.0″ Suspension Kit | Land Cruiser 60/62 Series 1980-1989
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- Front shackles add 1/2″ lift to the leaf spring lift height, giving just over 2″ of total front lift
- Select medium or heavy load leaf spring options
- Now with option to run new Dobinsons IMS or MRA Monotube shocks as an upgrade
- Ships by Fedex ground, multiple packages (4 loose leaf springs and a box with everything else)
From $2,210.00 Select options
40 Series Land Cruiser Early (1960-1979)
Dobinsons SK59-002 Greasable Shackle Kit for Toyota 40/45 Series
- Suits Front or Rear FJ40/BJ40 up to 1979 with 25mm spring eyes, and Front FJ45/BJ45 with 25mm spring eyes up to 1979
- Recessed twin hole greasable design
- Reduces friction in bushes, creating a more comfortable ride
- Heavy duty design and provide simple service through external grease nipples
- Sold as a pair to replace the original shackles
- Incredibly tough and durable gold zinc plating
- Photo for illustration purposes only
$110.00 Add to cart
200 Series Land Cruiser (2008-2021)
Ships FREE !!
within 48 US States
Dobinsons 200 Series Land Cruiser 1.0-2.5″ MRA Lift Kit
- Suits Toyota Land Cruiser 200 Series from 2008 to 2021 Models
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Remote Reservoir 3-way adjustable Shocks, Superior Design, thicker walls, longer travel
- Adjust high and low speed compression (HSC and LSC) and rebound adjustment front and rear
- Massive 66mm (2.6″) body size with 60mm pistons front and rear
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base kit Includes 2 Front Struts, 2 Rear Shocks, and 4 Coil Springs
- BANJO FITTING ON LOWER STRUT FACES INWARDS TOWARDS ENGINE ON BOTH SIDES
- Reservoir mounting instructions, it’s the same for KDSS and non-KDSS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen in the external reservoir
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- Coils springs are marked with white labels – DO NOT REMOVE – and they are also side specific!!
From $3,335.00 Select options
200 Series Land Cruiser (2008-2021)
Dobinsons C59-535 2-3″ Land Cruiser 200 Series Rear Coils
- C59-535 – 3″ lift with stock weight, 2.0″ with 220LBS
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold as a Pair – marked side specific for installation
$305.00 Select options
80 Series Land Cruiser (1990-1997)
Dobinsons C59-171 Rear Coil Springs | Land Cruiser
- 80 Series (1990-1997) – Dobinsons c59-171 – 2″ lift with 750lbs weight, OR 3″ lift with 440lbs weight
- 100 Series (1998-2007) – Dobinsons C59-171 – 1.5″ lift, linear rate, with 880LBS constant rear weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 485/495mm free height, 328LBF/in rate
- Sold in Pairs
$405.00 Add to cart
200 Series Land Cruiser (2008-2021)
Dobinsons Rear Adjustable Panhard Rod Track Bar | Land Cruiser 200 + 300 Series
- Suits Toyota Land Cruiser 200 Series 2008-2021, Toyota Tundra 2022+ and Toyota Sequoia 2023+, and Toyota Land Cruiser 300 Series 2022+
- Replaces OE Rear Panhard Rod, adjustable to suit lift height
- Zinc plated steel and E-coated with high quality rubber bushes supplied
- Off-car adjustable, cannot be set while fully installed
- For 35mm (1.25″) of lift or more
- Rubber Bushes installed and offer greater flexibility than polyurethane, providing maximum articulation
- Panhard rod measures 41″ compressed and can be extended up to 44″ eye to eye
$345.00 Add to cart
80 Series Land Cruiser (1990-1997)
Dobinsons C59-170 Front Coil Springs | Land Cruiser 80 Series 3.0″ Lift with 220LBS Load
- C59-170 are Front Linear rate coils to give 3.0″ of lift with 110 to 220 LBS of constant accessory weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
$305.00 Add to cart
60 62 Series Land Cruiser (1980-1989)
Dobinsons HJ61-7L-F Front Leaf Springs Pair for 60 62 Series
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Sold as a pair
- 45mm front lift with 110-220LBS of additional weight and gas engine
- Remove the 3rd leaf from the top to make these the HJ61-6L-F
$360.00 Add to cart
On Backorder
60 62 Series Land Cruiser (1980-1989)
Dobinsons HJ61-6L-F Front Leaf Springs Pair for 60 62 Series
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Sold as a pair
- 45mm front lift with stock weight and gas engine
$360.00 Add to cart
80 Series Land Cruiser (1990-1997)
Dobinsons C59-309 Rear Coil Springs | Land Cruiser 80 Series
- c59-309 4″ lift with 110-220lbs weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 520/530mm free height, 20mm wire, 274LBF/in rate
- Sold in Pairs
$405.00 Add to cart
70 Series Prado I, Land Cruiser II, LJ78/79, RJ77, KZJ78 - 87-96
Dobinsons 1.75″-2.5″ Lift Kit for Toyota Land Cruiser LJ78 LJ79 RJ77 KZJ78 1987-96 Square Headlights
- For 1987-1996 Toyota 70 Series 5-door models, LJ78, LJ79, RJ77, KZJ78 with Square Headlights and 2.4L petrol or 2.4L diesel engines
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to match OE fitment specs
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base kit includes front and rear coils and shocks, choose optional parts below
- Choose your coils and load carrying ability, anywhere from 1.75″ up to 2.5″ of Lift
From $1,160.00 Select options
80 Series Land Cruiser (1990-1997)
Dobinsons GS59-684 6-7″ Front Shocks for 80 series
- Dobinsons GS59-684 6-7″ Front Twin Tube Shocks for Toyota Landcruiser 80 series with 6-7″ of lift or for a Long Travel setup
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals
- Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS59-684 Specifications: 728mm extended, 420mm compressed, 60mm body size
$350.00 Add to cart
80 Series Land Cruiser (1990-1997)
Dobinsons C59-312 Front Coil Springs | Land Cruiser 80 Series 4.0″ Lift with 200-300LBS Load
- C59-312 are Front Linear rate coils to give 4.0″ of lift with 200 to 300 LBS of constant accessory weight,
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 560/570mm free height, 20mm wire, 314LBF/in rate
- Sold in Pairs
$405.00 Add to cart
Dobinsons
Dobinsons SP59-006 Greasable Pin Kit (Pair) Land Cruiser 40/45 Series to 1979
- Suits 25mm leaf springs in front and rear of FJ40, BJ40 and the front of FJ45, BJ45 with 25mm spring eyes and 15mm bolts
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Purchase includes 1 pair (2 pieces) of greasable pins for the fixed end of a leaf spring
- Photo for reference only, actual product may appear different
$120.00 Add to cart
100 Series Land Cruiser IFS (1998-2007)
Dobinsons Rear 10mm Poly Coil Spacer (Single) Toyota Land Cruiser 80 100 105
- High Quality Polyurethane, maintains height over time
- Perfect fit between OE isolator and coil seat
- Sold individually, available front and rear for several vehicles
- Lasts longer than rubber
- Easy to add lift height for worn coils
- Lifts 10mm (0.4″)
$40.00 Add to cart
200 Series Land Cruiser (2008-2021)
Ships FREE !!
within 48 US States
Timbren ABSTORLC2 Active Off Road Toyota 200 Series Rear Bump Stops
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation
- Satisfaction Guarantee
- Lifetime Warranty
- Suits 2008 to 2021 Toyota Landcruiser 200 Series Rear End
- Click here for instructions
$269.36 Add to cart
80 Series Land Cruiser (1990-1997)
Dobinsons C59-166 Front Coil Springs | Land Cruiser 80 Series 2.5″ Lift no Load, 2.0″ with up to 220LBS Load
- C59-166 are Front Linear rate coils to give 2.0″ of lift with 110 up to 220 LBS of accessory weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
$270.00 Add to cart
Accessories
Dobinsons 200 Series Drawers for Toyota Land Cruiser 2008-2019
- Complete drawer system for the back of your 200 Series Land Cruiser
- 1.6mm Zinc Plated Robust Steel Construction
- 12mm Heavy Duty Plywood Panels with Marine Carpet Covering
- Built in Heavy Duty Fridge Slide
- 8 x Heavy Duty Stainless Steel Tie Down Points
- Comprehensive outer wing trim kit to provide a factory fit (optional)
- Super clean installation and DOES NOT rattle unlike some other drawer systems on the market
- Aluminum Edging Protection, Heavy duty lockable latches
- Massive 150KG (330LB) Drawer Capacity on Heavy Duty Roller Bearing System
- Add optional Dobinsons Rear Drawer Table Top for better useability of the drawer
- New body style will need longer bolts and extra washers
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address
From $1,465.00 Select options