Your cart is currently empty!
Shop
Showing 781–810 of 1944 resultsSorted by popularity
-
Trail-Gear
Rock Defense Low Profile 80 Series Front Bumper
- Suits 1990-1997 Toyota Land Cruiser 80 Series and Lexus LX450
- Made out of 1020 DOM (1.75″ X .120″ wall).
- Winch mount is made out of a .25″ CNC formed steel plate
- Mounting holes on the winch plate are drilled for most 5000-9500 model low-profile winches and smaller sized 9.0R Warn competition winches
- Bumpers also features a shackle receiver
- Unpainted steel finish
- Will not work with roller type fairlead, requires hawse type fairlead
- Weight is 86LBS
- Made in the USA
- Ships by UPS Ground
- Installation Instructions
- Also sold with a stinger top tube added as pictured in some of the photos
(9 reviews) -
Sale!
15% off Year End SaleSamuraiSuzuki Samurai 4.16:1 Transfer Case Gear Set
- Suits 1986 to 1995 Suzuki Samurai
- Low Range reduction is 4.16 to 1 (84% low range reduction). High Range reduction is 12%
- Includes new precision cut gears, counter shaft, needle bearings, shims, O-ring, gaskets, and input/output seals
- Heavy Duty Samurai T-Case Output Shaft recommended
- Made out of Japanese SCM415 alloy for its greater strength and wear resistance
- SCM415 outperforms the 8620 material in yield and ultimate tensile strength
- Note: The recommended tire size for the 4.16 gears is 29″-30″
- Installation Instructions
(9 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons 80 Series Rear Bump Stop Extensions Kit (1.0-2.0 in)
- Suits the rear of all Toyota Land Cruiser 80 Series from 1990 to 1997
- 1″ (25mm) extensions stackable up to two per spot for a total of 2″ (50mm) of thickness
- Durable Solid Steel Spacers
- Sold as a Kit for inner and outer rear bump stops
- The inner goes inside the coil spring on the axle end
- The outer goes between the mount and the bump stop on the frame
- Space down your bump stops to prevent shock bottom outs at full compression
- Keep your tires out of your fenders if they’re oversized by spacing down the bump stops
- General bump stop extension guidelines (will vary based on brand of shocks and bump stops used)
- Dobinsons 0-3″ lift shocks: Extensions are not necessary, unless running oversized tires
- Dobinsons 4-5″ lift shocks: Front needs about .5″ of bump stop extension, rear needs 2” of bump extension
- Dobinsons 6″ lift shocks: Front needs about 1.5” bump stop extension, rear needs a 3” extension or 2″ extension with extended length bump stops
- We offer replacement bump stops as well Here
(2 reviews) -
LX470FREE SHIPPING
within 48 US StatesPowerbrake X-Line Lexus LX470 Big Brake Kit 1998-2007
1998-2007 Front Lexus LX470 Big Brake Kit Includes:
- X-Line front billet 6-piston off-road calipers (pair)
- High-performance brake pads, pre-loaded into the calipers
- 1-Piece 13.7″ x 1.33″ 48-vane discs
- 48 Curved, directional cooling vanes
- Billet caliper mounting brackets
- Stainless steel braided brake lines
- All necessary mounting hardware for quick, easy bolt-on installation
- Comprehensive fitment and bed-in instructions
- Now Includes Upgraded Powerbrake Pads, PB05 Compound – highest level 4×4 brake pads available – made in Japan
- Manufactured, finished and packaged 100% in South Africa
- REQUIRES 17″ WHEELS FOR ADEQUATE CALIPER CLEARANCE
- Photos are used to show detail and appearance, actual product for this vehicle may vary
(3 reviews)$2,675.00 Select options This product has multiple variants. The options may be chosen on the product page -
Shocks - 80 SeriesFREE SHIPPING
within 48 US StatesDobinsons IMS59-60689 Front IMS 2.6″ Shocks Pair | 80 Series – 31″ Extended
- 31″ long 2.6″ body shocks for the front of a Toyota Land Cruiser 80 Series or Lexus LX450
- For custom use, extreme front long travel shocks, longer than the Dobinsons 6″ lift shocks
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
- 790mm (31.1″) extended, 467mm (18.4″) compressed
- Bump stop extensions are required to prevent bottom outs, depending how you mount the shocks
- Includes rubber shock boots to protect the shock shafts
- Photo for illustration purposes
(8 reviews) -
Full Suspension Kits - GX460
Dobinsons 1.5-3.5″ Pre-Assembled Twin Tube Lexus GX460 Coilovers
- Suits Lexus GX460 4×4 Models 2010-2023, with or without KDSS
- Set of twin tube coilovers for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Choose the appropriate coils to match the lift height you want that also suits the added weight you have on the vehicle
- Nitrogen Gas Charged Struts, Superior Design, thicker walls, longer travel
- Direct Bolt-in Replacements, Pre-Assembled and Ready To Go
- 32mm Bore Size, Double Chromed 18mm Rod
- 51mm Body Size
- High Quality Fuch’s German Shock Oil
- NOK Multi-Lip Seals
- Teflon Piston Rings
- Natural Rubber Bushings for the Best NVH Dampening
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Built to order
- Lift heights are subject to variations in vehicle years as well as accessory weights, engine differences, and other variables.
(5 reviews) -
MRA Remote Resi 3-Way Adjustable MonotubeFREE SHIPPING
within 48 US StatesDobinsons MRA 2.6″ Smoothie Shock – 12″ Travel 3-Way Adjustable
- Dobinsons MRA 2.6″ Body Universal Smoothie Shock – offered in 10″, 12″ and 14″ Travel lengths
- MRA92-A2522 – 12″ Travel Shock
- Extended Length: 33.42″ / 851mm
- Compressed Length: 21.48″ / 547mm
- Reservoir Length: 12″ / 300mm
- Hose Length: 19.6″ / 500mm
- Rod Diameter: 22mm / 7/8″
- MRA means Monotube Remote (reservoir) Adjustable
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 5140 HV900 Hard Chrome Plated, Heat Treated 22mm micro-polished high strength shock shaft.
- Shaft minimum tensile strength exceeding 700MPA / 100 PSI and hardness exceeding 46HRC
- 2.6″ Shock Body precision honed to +/- 0.04mm
- Zinc plated DOM 3mm steel shock body for ultimate corrosion protection
- Parker Steel braided, rubber coated high pressure hoses
- Lightweight CNC machined low friction floating piston
- 3 Stage FMJ+HNBR long life, low friction sealing system
- PTFE lined high quality spherical bearings
- Fully rebuildable and tunable
- Dual rate design with high quality slider & cross-over rings
- 64mm Finned Reservoir
- 350V.I. High performance damper fluid
- T6061 CNC machined ultra high flow race piston
- Includes universal reservoir isolators and hose clamps
- Replacement shims and misalignment spacers are included
- SINGLE SHOCK INCLUDED (Add two to cart for pair)
- WARNING PLEASE READ this notice about misalignment spacers
- Fully detailed guide and owners manual – MUST READ before ordering to understand setting up the shocks
- Limited Warranty details down below
(7 reviews) -
Tundra 2nd Gen (2007-2021)
Expedition Truck Cap with Full Wing Doors | Tundra 2007-2021 5.5FT Bed
- Specifically suits 2007-2021 Toyota Tundra Trucks with the 5.5FT Bed length
- No Drill Installation: Say goodbye to complex installations. Our no-drill installation process is hassle-free and preserves your truck’s integrity. You can have your topper ready for action in no time.
- Marine-Grade Stainless Construction: Engineered to withstand the harshest conditions, our topper is built to last. Crafted from marine-grade stainless steel, it ensures longevity and corrosion resistance, ready to tackle any terrain.
- Textured Powder Coat Finish: The tough, textured powder coat finish not only adds a striking aesthetic but also provides extra protection against the elements, making your topper look great season after season.
- True Fit Technology: Say goodbye to the hassle of ill-fitting toppers. Our True Fit Technology ensures a seamless and secure fit, giving your truck a sleek, integrated appearance.
- Built-In Air Vent: Stay comfortable on the go with our integrated air vent. It ensures proper ventilation inside the topper, keeping your gear and equipment in optimal condition.
- Waterproof Seals: Rain or shine, your cargo stays dry. Our topper features waterproof seals that create an impenetrable barrier against moisture, so you can venture into the unknown with confidence.
- Heavy-Duty Latches: Robust and dependable, our heavy-duty latches keep your topper securely closed, providing peace of mind whether you’re on or off the beaten path.
- Solid Hinges: Designed for longevity and strength, our solid hinges allow for smooth and reliable opening and closing of the topper, even after years of use.
- Tempered Glass: Safety is paramount. Our topper comes with Tempered glass, ensuring clear visibility and compliance with all safety standards.
- 3rd Brake Light: Added safety features for your peace of mind. The integrated third brake light enhances visibility, keeping you and those around you safe.
- High-Pressure Struts: Our topper boasts high-pressure struts, making it easy to access your gear while providing consistent and reliable support.
- Modular Construction: Customize your topper to fit your needs. Our modular construction allows you to add or remove components easily, adapting to various adventures.
- Lifetime Warranty: We stand behind our product’s quality. Enjoy peace of mind with a lifetime warranty, ensuring your topper will be by your side for all your future journeys.
- Roof Rails and Crossbars: Take your adventures to the next level with our built-in roof rails and optional crossbars. They provide ample space to carry additional gear, bikes, kayaks, and more, allowing you to maximize your outdoor experiences.
- Dry Weight: 252 LBS
- Dynamic Weight Capacity: 325 LBS
- Static Weight Capacity: 750 LBS
- Measurements: 75 x 54 x 28″
- Ships from the fulfillment warehouse on a pallet by LTL Freight, the freight line will be in touch with you to setup a delivery appointment
- We strongly recommend you keep the shipping insurance on your order during checkout, in case of any damage in transit, it will be covered
(3 reviews) -
Recovery
Dobinsons Offset Aluminum Hawse Fairlead
- Machined Aluminum
- Offset fairlead to position the rope feed to the winch drum centered properly
- Suits all ARB front bumpers that usually use a roller fairlead
- If your bumper has the winch mounted feet-forward, and the bottom hole also goes through the fairlead, you’ll need this offset one
- Narrow profile, doesn’t protrude
(2 reviews) -
Rusty's Off RoadFREE SHIPPING
within 48 US StatesRusty’s Adjustable Front Track Bar 0-2″ Lift | Jeep TJ XJ ZJ
- Fits: Jeep Wrangler TJ and LJ, Cherokee XJ and Grand Cherokee ZJ with 0-2″ lift only
- The track bar centers the axle left to right on the vehicle, and adding lift causes the vehicle to be offset and not aligned correctly
- Constructed of 1.50″ x .188″ wall DOM tubing
- Has enough adjustment to accommodate a 0-2″ of lift
- Black powder coated and come with long-lasting heavy-duty polyurethane bushings
- Mounts using stock hardware and locations
- Built in Rainbow City, Alabama, USA
(9 reviews) -
Steering UpgradesFREE SHIPPING
within 48 US StatesRusty’s Front Track Bar Mount Brace | JL Wrangler + JT Gladiator
- Fits: 2018-Current Jeep JL Wrangler and 2020-Current Jeep JT Gladiator Models
- This is a brace that supports the mount between the steering box and the track bar bracket
- Constructed of 1/4-inch thick laser-cut steel
- CNC formed for an exact fit
- E-coated in black for durability and looks
- Includes Grade 8 hardware
- INSTALLATION INSTRUCTIONS
- Built in Rainbow City, Alabama, USA
(7 reviews) -
Steering UpgradesFREE SHIPPING
within 48 US StatesRusty’s HD Steering System | JK Wrangler
- Fits: 2007 to 2018 Jeep Wrangler JK Models
- Over 45 Years of Building Steering and Suspension Components
- Massive 1.75″ x 0.250-wall DOM Tubing Drag Link and Tie Rod
- Large 1.25″ threads on the U.S.A. tie rod ends, most brands are imports
- Machined hexed ends for easy adjustment
- Zinc plated tie rod ends for protection and long life
- Serrated Lock Washers
- The strongest JK steering assembly you can buy
- Steering stabilizer tie rod clamp bracket included
- INSTALLATION INSTRUCTIONS
- Built in Rainbow City, Alabama, USA
- Also made in a Aluminum version
(4 reviews) -
Sidekick/Tracker (1988-1998)FREE SHIPPING
within 48 US StatesDobinsons Lift Kit | Suzuki Sidekick + Geo Tracker 1988-1998
- Dobinsons Complete Suspension Lift Kit for the Suzuki Sidekick and Tracker LWB (Long Wheel Base) 1988-1997
- These lift 40mm (1.6″) Front and 30mm (1.2″) Rear, as they come, or you can add the coil spacers to gain extra lift height
- Take note that adding extra lift height to the front will result in reduces camber and it could be harder to get a proper wheel alignment without custom modifications to get a better alignment
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Superior Designed Nitro Gas Shocks, thicker walls, longer travel
- Japanese NOK Multi-Lip seals
- Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- GS57-620 struts are 501mm extended, 304mm compressed
- GS57-621 rear shocks are 505mm extended, 318mm compressed
(20 reviews) -
Sidekick/Tracker (1988-1998)
Dobinsons C57-047 Rear Coils | Sidekick + Tracker LWB Heavy – Pair
- Dobinsons C57-047 Rear 30mm Heavy Load (110-220LBS Constant Rear End Load) Lifted Coil Springs for the Suzuki Sidekick and Tracker LWB (Long Wheel Base) 1988-1997
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(15 reviews) -
Sidekick/Tracker (1988-1998)
Dobinsons C57-016 Front Coils | Suzuki Sidekick and Tracker – Pair
- Dobinsons C57-016 Front 40mm Lifted Coil Springs for the Suzuki Sidekick and Tracker 1.6L 16 Valve engine 1988-1997
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(10 reviews) -
4Runner 2nd Gen (1990-1995)
Dobinsons Toyota 4Runner 2.0″ Suspension Kit for 1990-1995
- Suits Toyota 4Runner 1990-1995 USA models with torsion bars up front and coil springs in the rear
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Multiple coil spring options
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Choose which specific parts you’d like from the menu below
(10 reviews) -
4Runner 2nd Gen (1990-1995)
Dobinsons Toyota 4Runner 2.0″ IMS Suspension Kit for 1990-1995
- Suits Toyota 4Runner 1990-1995 USA models with torsion bars up front and coil springs in the rear
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Multiple coil spring options
- Shocks are Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Choose which specific parts you’d like from the menu below
(6 reviews) -
SnorkelFREE SHIPPING
within 48 US StatesDobinsons Land Cruiser 200 Series Snorkel Kit for 2016-2021
- 200 Series Snorkel Kit – Suits Toyota Land Cruiser 200 Series 2016-2021 Models
- Smooth body, no writing or logos on the body
- Rotationally molded using precision CNC shaped aluminum dies
- Increases air intake height to allow safer water crossings and reduce dust intake
- Increased air intake height rams cooler, cleaner air into the engine increasing engine performance
- The higher the intake, the less dust is in the air
- Manufactured from high quality UV resistant LLDPE
- Snorkel Kits include template and all mounting hardware
- There’s a different snorkel to fit the 2015 and older models here
(8 reviews) -
Rear Drawers
Dobinsons DW59-025K Wing Side Panel Kit for 200 Series LX570
- Suits Toyota Land Cruiser 200 Series 2008-2019 or Lexus LX570 without 3rd row seats
- Complete wing kit for both sides to suit Dobinsons rear drawer systems
- Includes vertical and horizontal pieces, brackets and hardware
- Fills in the side parts left exposed once drawers have been installed, providing a neat finish
- Drawers are sold separately
(3 reviews) -
Leaf Springs - Tacoma 3rd Gen
Icon 2005-2023 Tacoma Multi Rate RXT Leaf Pack w/Add in Leaf
- Suits 2005-2023 Toyota Tacoma 4×4 Models
- 3 user-adjustable spring rates for unique vehicle configurations
- Lift height can vary based on bed length and added weight
- Lift from 1.875″ to 2.625″ unloaded depending how you assemble them, see attached photo describing the process
- Military wrap front eyelet for increased durability
- Galvanized leaf separators reduce friction and aid in corrosion resistance
- Leaf tip inserts reduce noise and increase ride comfort
- Includes additional leaf with 15% or 25% increase in spring rate for more laden “outfitted” vehicles
- Potential for increased wheel travel (when used with RXT shock) without sacrificing up-travel
- “ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability
- Direct bolt-in to OEM spring location makes for an easy install
- Bushings are included and pre-installed
- Requires longer U-Bolts for installation
- Sold individually, buy 2 for 1 vehicle
- DOWNLOAD INSTALLATION GUIDE
(5 reviews) -
Upper Control ArmsFREE SHIPPING
within 48 US StatesIcon Tubular UCA DJ Pair for 07-21 Tundra + 08-22 Sequoia
- Suits 2007-2021 Tundra and 2008-2022 Sequoia 4×4 Models with 1.75+ of lift
- ICON Delta Joint
- 1026 DOM Steel Construction
- CNC Bent Tubing
- Serviceable Dual Stage Bushings
- CNC Machined Bushing Housings and Sleeves
- Built-In Caster Correction
- Black Semi-Gloss Powder Coat Finish
- Installation Guide
- Warranty Info
(10 reviews) -
Tundra 3rd Gen (2022-2024)FREE SHIPPING
within 48 US StatesDobinsons IMS59-60885 2.6″ IFP Rear Shocks Pair | Long Travel
- Suits 2022+ Toyota Tundra Rear with 1.0-3.0″ of Lift – Long Travel
- These long travel rear shocks require extended sway bar links, extended brake lines, and 1.5″ bump stop extensions or longer bump stops
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Japanese NOK Multi-Lip seals
- Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
(18 reviews) -
TimbrenFREE SHIPPING
within 48 US StatesTimbren TORSEQ SES Suspension Enhancement System | Toyota and Lexus SUV’s
- Suits 4th and 5th Gen 4Runner (2003-2024), FJ Cruiser, Lexus GX470 and GX460, Landcruiser 100 Series, Sequoia 2001-2007
- This is only for use with stock height rear coils – will not work correctly on a lifted vehicle
- Great alternative to airbags, never needs any air or maintenance yet provides the same function
- Reduces sag, sway, and roll when towing and hauling
- Comfortable ride, loaded or unloaded
- DIY installation
- Bolts in where the factory bump stops go
- Zero post-installation maintenance
- Satisfaction Guarantee
- Lifetime Warranty
- Installation Instructions
(14 reviews) -
Tundra 2nd Gen (2007-2021)
RCI Tundra Fuel Tank Skid Plate | 2007-2021 Tundra
- Suits 2nd Gen Tundra (2007-2021)
- 26 gallon skid is NOT compatible with 8 foot bed models
- Protects the vulnerable fuel tank from accidental puncture
- Compatible with nearly all 4×4 trucks from 2007-2021 (26 gallon skid is NOT compatible with 8 foot bed models).
- Requires Toyota rear fuel tank support strap from off-road model to bolt on skid plate
- Same mounting locations as factory skid plate but substantially sturdier metal construction
- Smooth, flat surface that easily slides over obstacles. No exposed bolt heads on skid plates on 26gal fuel skid plate
- 38gal fuel tank skid plate now incorporates welded bolt protection rings standard
- Direct bolt on addition, no drilling
- Includes heavy duty black powder coating for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware and installation instructions provided
- Made in the USA.
(4 reviews) -
BrakesFREE SHIPPING
within 48 US StatesPowerbrake X-Line Toyota Tundra Big Brake Kit for 2007-2014
2007-2014 Toyota Tundra Big Brake Kit Includes:
- X-Line billet 6-piston off-road calipers (pair)
- High-performance brake pads, pre-loaded into the calipers
- 1-Piece 14.6″ x 1.34″ 56-vane discs
- 56 Curved, directional cooling vanes
- Billet caliper mounting brackets
- Stainless steel braided brake lines
- All necessary mounting hardware for quick, easy bolt-on installation
- Comprehensive fitment and bed-in instructions
- Suits 2007-2014 models with M12 caliper mounting bracket bolts
- Now Includes Upgraded Powerbrake Pads, PB05 Compound – highest level 4×4 brake pads available – made in Japan
- Manufactured, finished and packaged 100% in South Africa
- REQUIRES 18″ WHEELS FOR ADEQUATE CALIPER CLEARANCE
- Check out the rear brake upgrade also
(8 reviews) -
Recovery
MAXTRAX Flat Rack Mounts with T-Bolts
- Mount up to 4 Maxtrax (2 Pairs) with this kit, includes mounts, hardware and pins for the Maxtrax
- Designed to mount to your MAXTRAX to your vehicles roof platform or roof rack crossbars
- Can securely attach up to four MAXTRAX MKII (MTXMPS17), 4 MAXTRAX XTREME (MTXXMPS17), or a pair of each (MTXMPSX17)
- Provides 180mm of closer adjustment or 180mm of further apart adjustment from the mounting point of the Flat Racks
- Includes the mounting option of 4 x T-Bolts (Suitable for Rola Titan roof platform, roof platforms and roof rack crossbars from most popular Roof Rack Brands)
- SOLD IN PAIRS
(4 reviews) -
Montero NM NP NS NT 2000+
Dobinsons C43-125 Rear 1.75″ Lift Coil Springs for Montero 2000-06 – Pair
- 1.75-2.0″ rear lift with 110-220LBS constant weight on a Mitsubishi Montero 2000-06 USA model
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(9 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons Front Adjustable Panhard Rod | 80 Series Right Hand Drive
- FOR RIGHT HAND DRIVE MODELS ONLY (Japanese import, etc.)
- Replaces OE Front Panhard Rod, adjustable to suit lift height
- Zinc plated steel then E-coated with all hardware and high quality rubber bushes supplied
- Off-car adjustable, cannot be set while fully installed
- For 3″ to 6″ of lift
- Rubber Bushes offer greater flexibility than polyurethane, providing maximum articulation
- Image for illustration purposes only
(5 reviews) -
Full Suspension Kits - XterraFREE SHIPPING
within 48 US StatesDobinsons 2.5″ Lift MRA Extended Travel Coilovers 3-Way Adjustable – Nissan Xterra 2005+
- Extended Travel Coilovers Suit Nissan Xterra 4×4 Models (2005-2015) – lifts 2.5″
- These extended travel struts REQUIRE aftermarket UCA’s for full travel, like Dobinsons
- Looking for a quick and easy way to lift your Xterra? This is your answer
- Dobinsons MRA are height adjustable by a fully threaded body
- The Dobinsons MRA Coilovers will come pre-assembled with new struts, coils and top mounts
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Reservoir Bracket and Hardware, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Length specs – 278mm compressed and 410mm extended
- Photos for illustration purposes
- FITTING INSTRUCTIONS
- Instructions for setting coil seat height
- Link to the matching rear shocks
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
(6 reviews) -
Sale!15% off Year End SaleSuspensionFREE SHIPPING
within 48 US StatesAll Pro Offroad 2005-2023 Tacoma U-Bolt Flip Kit
- Designed for Rear Leaf Springs Only, 2005-2023 Toyota Tacoma 4×4 and Prerunner
- Provides increased ground clearance under the axle by flipping the U-bolts upwards
- U-bolt mounting Plates are not painted or coated, and 3/8″ Thick
- Threaded Holes are 3/8″-16 with a 4″ Spread
- Includes (4) Zinc-Coated 1/2″ Grade 5 U-bolts (8.75″ Long) with Zinc-Coated Hardware
- Plates tapped for bump stops
- We recommend running with Wheeler’s SuperBumps
(7 reviews)
