Your cart is currently empty!
Shop
Showing 121–150 of 1945 resultsSorted by popularity
-
80 Series Land Cruiser (1990-1997)On Sale All November!!
Dobinsons Front Coil Spring Options | Land Cruiser 80 series 0-6″ Lift – Pair
- Suits Land Cruiser 80 Series and Lexus LX450
- Sold in Pairs
- Choose what coil suits your vehicle and needs the best
- Dobinsons C59-210V Stock Height Progressive Rate
- Dobinsons C59-234 2.0″ Lift Comfort Ride
- Dobinsons C59-220V 2.0″ Lift Progressive Rate with 0-110LBS Load
- Dobinsons C59-222V 2.0″ Lift Progressive Rate with 110-220LBS Load
- Dobinsons C97-146VT 2.5″ Lift Variable Tapered Long Travel Heavy Load
- Dobinsons C59-166 2.5″ Lift no Load, 2.0″ with up to 220LBS Load
- Dobinsons C59-612V 3″ Lift Flexi up to 220LBS Load
- Dobinsons C97-144VT 3.5″ Lift Dual Rate 220LBS+ Heavy Load Long Travel
- Dobinsons C59-176 3.0″ Lift with 110LBS Load
- Dobinsons C59-170 3.0″ Lift with 220LBS Load
- Dobinsons C59-614V 4″ Lift Flexi up to 220LBS Load
- Dobinsons C59-308 4.0″ Lift 110-160LBS Load
- Dobinsons C59-312 4.0″ Lift with 200-300LBS Load, 5-6″ with Stock weight
- Dobinsons C59-310 6.0″ Lift with 220LBS
- Click HERE to see the REAR coil options
(17 reviews) -
200 Series Land Cruiser (2008-2021)On Sale All November!!
Dobinsons SC59-006 Pair of Strut Top Plates | Land Cruiser 200 Series 2007-21
- Designed to exact OE specs, using all new rubber bushes, washers and seats
- New zinc coated hardware for corrosion resistance
- Allows faster assembly of new components, not needing to disassemble used parts
- Enough for 1 vehicle, sold as pairs
- Product is exactly the same as photo attached
- Assembly Instructions
(9 reviews) -
DobinsonsOn Sale All November!!
Dobinsons Front 30mm Polyurethane Coil Spacer (Single) Toyota Land Cruiser 80 105
- Suits Land Cruiser 80 Series and Lexus LX450
- High Quality Polyurethane, maintains height over time
- Perfect fit between OE isolator and coil seat
- Sold individually, available front and rear for several vehicles
- Lasts longer than rubber
- Easy to add lift height for worn coils
(4 reviews) -
Upper Control ArmsFREE SHIPPING
within 48 US StatesOn Sale All November!!Dobinsons Billet Aluminum Adjustable UCA’s Pair | 4Runner FJ Cruiser GX470 GX460
- Super strong billet aluminum front upper control arms (UCA’s) for Toyota and Lexus SUV’s
- Suits 2003-2009 4Runner, 2010-2024 4Runner, FJ Cruiser (all years), Lexus GX470 and Lexus GX460
- Complete kit for both left and right hand side, fully assembled with ball joints pressed in
- High clearance design to clear pretty much every coilover size available
- OE-style sealed ball joints for a maintenance free life
- OE-style high quality rubber bushings for maximum NVH dampening and longevity
- No greasing or maintenance required at all, completely noise-free operation
- Adjustable on-vehicle for quick and easy alignment.
- Adjustable Camber and Caster for perfecting the vehicle’s handling
- Adds 2 or 3 degrees of added caster, and caster can be further adjusted
- O-ring sealed ball joint cap for protection against the elements
- Works for any lift height of 1.5″ or more
- Installation Instructions
- Video on YouTube showing features and Installation
- We recommend visiting an offroad specific shop for alignment, a regular alignment shop may not be able to adjust and align properly due to the added adjustability these arms offer
- Replacement Ball Joints can be ordered here
(8 reviews) -
SuspensionOn Sale All November!!
Dobinsons GS59-713 Pair of Rear Shocks | Toyota Sequoia 2008-2022
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Sold in Pairs
- Dobinsons GS59-713 Specifications: 471mm extended, 315mm compressed
- Add this kit when buying these shocks if you will be using these for 2.5″of lift
(6 reviews) -
SuspensionOn Sale All November!!
Dobinsons IMS59-60710 2.6″ IFP Front Struts Pair | Toyota Tundra & Sequoia
- For 1.75-3.0″ of lift
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Features clip adjustment levels for fine tuning of lift height
- 4 Clip height settings. Lowest height is stock/OE height. Each clip height adds approximately 1/2″ of lift. Use clip heights to fine tune lift height or offset for vehicle lean
- Recommended to run with Dobinsons coils. OE coils may contact the thicker shock body
- TRD Pro models should start at the 2nd clip up to add 1/2″ of coil seat height, which equals the 1″ of lift the PRO’s come with when new
- ASSEMBLY INSTRUCTIONS
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- 615mm extended, 445mm compressed lengths
- Full 2 year limited warranty, no set rebuild time period
- If you are buying parts separately (coils and struts) and want them preassembled prior to shipping, add this product to your cart also
(13 reviews) -
4Runner 5th Gen (2010-2024)FREE SHIPPING
within 48 US StatesOn Sale All November!!Dobinsons MRA59-A700 3-Way Adjustable MRA Front Struts Pair
- Suits 2010-2024 4Runner, 2010+ FJ Cruiser, Lexus GX460, Toyota Prado 150, and 2015+ Toyota Hilux Revo, suitable for 0 – 2.5″ of lift
- The more you lift it, the less droop you will have left in the front end
- Height adjustable with a fully threaded body
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- MRA59-A700 – 560mm extended, 420mm compressed
- Includes Universal Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Does not include coil springs or top mounts – sold separately
- Instructions on setting coil seat height
- Resi installation instructions
(18 reviews) -
Sequoia 2nd Gen (2008-2022)On Sale All November!!
Dobinsons C59-719V Sequoia 2.5″ Lift Rear Variable Rate Coils for 2008-2022 – Pair Teal
- Gives 2.5″ rear lift and an excellent ride on a 2nd Gen Sequoia 2008-2022 5.7L V8
- These coils are made SPECIFICALLY for a 2nd Gen Toyota Sequoia with IRS (Independent Rear Suspension)
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 480-600lbs/in. – Variable Rate
- 440mm Free Height – Variable Rate Coils
- Longer shocks required. Use Dobinsons GS59-713 with these shock extensions
(19 reviews) -
Tundra 2nd Gen (2007-2021)On Sale All November!!
Dobinsons Toyota Tundra Greasable Shackle Kit Pair for 2007-2021
- Suits Toyota Tundra 2007-2021
- Recessed twin hole greasable design
- Reduces friction in bushes (included), creating a more comfortable ride
- Heavy duty design and provide simple service through external grease nipples
- Sold as a pair to replace the original shackles
- Incredibly tough and durable gold zinc plating
- NOW Includes bushings for top and bottom of the shackles
- Use Dobinsons SP59-060 Greasable Pin Kit on the fixed ends of the leaf springs
(7 reviews) -
DobinsonsOn Sale All November!!
Dobinsons Toyota Sequoia Rear Shock Extension Kit | 2008-2022
- Suits 2008-2022 Toyota Sequoia
- Allows you to use either the Dobinsons GS59-713 twin tube rear shocks with a 2.5″ rear coil spring set.
- These shocks aren’t quite long enough to handle the added length that a 2.5″ lift needs, and yes with this simple bolt-on bracket, this avoids the need for Dobinsons to make longer shocks
- The IMS59-60713 are already longer and do not require shock extensions
- The kit comes with the 2 brackets as pictured and new nuts and bolts to attach them in place. They simply sit between the shock mount and the control arm to raise the shock into the proper position.
- These SHOULD NOT be used for a 1.75″ lift, as the shocks will then bottom out too soon.
- Could be used with other brands of shocks, but were made to compliment the complete Dobinsons 2.5″ Suspension kit for the 2008-2022 Toyota Sequoia
(7 reviews) -
Sequoia 2nd Gen (2008-2022)On Sale All November!!
Dobinsons C59-477 1.75″ Rear Coils for Toyota Sequoia 2008-2022 5.7L V8 – Pair
- C59-477 are made specifically for the 2008 to 2022 Toyota Sequoia with the 5.7L V8 to give 1.75″ (45mm) of rear lift
- Not suitable on vehicles that came with factory rear air suspension
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 624LBF/in spring rate
- Sold in Pairs
(16 reviews) -
80 Series Land Cruiser (1990-1997)On Sale All November!!
Dobinsons C59-221V Stock Height Rear Coil Springs | Land Cruiser 80 series – Pair Teal
- Suits Land Cruiser 80 Series and Lexus LX450
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 460/470mm free height, 17mm wire, variable rate
- Sold in Pairs
(19 reviews) -
4Runner 3rd Gen (1996-2002)On Sale All November!!
Dobinsons GS59-222 Struts for 4Runner 96-02 Tacoma 98-04 Sequoia 01-07 Tundra 00-06
- Suits 3rd Gen 4Runner, 1st Gen Tacoma, 1st Gen Tundra, 1st Gen Sequoia, and Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- 465mm extended, 335mm compressed
- Sold in Pairs
(0 reviews) -
SuspensionOn Sale All November!!
Dobinsons IMS45-60912 Front 2.6″ IFP Shocks Pair | Land Cruiser 80 Series (4-5″ lift)
- Suits Land Cruiser 80 Series and Lexus LX450
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
- 668mm extended, 402mm compressed
- Bump stop extensions and longer brake lines must be run with these longer shocks
(17 reviews) -
DobinsonsOn Sale All November!!
Dobinsons Front Coil Spring Options for Toyota 5th Gen 4Runner 2010-2024 – Pair
- Choose what coil suits your vehicle and needs the best
- Sold as a Pair
- Stock weight = all stock front end | 110 LBS is usually a slim line bumper and winch with synthetic line | 220 LBS is usually a full width steel bumper with a winch and synthetic or steel line | 300+ LBS is usually a full with steel bumper, winch, dual batteries, and skid plates
- C59-238 – Stock front end, low height 3/4″ to 1″
- C59-296 – Stock front end, 1.5″ lift
- C59-300 – Stock front end, 1.75-2.0″ lift
- C59-302 – Stock – 2.5″ | with 110-150lbs – 2″
- C59-314 – Stock – 3″ | with 110-220lbs – 2.5″
- C59-350 – With 220-300lbs – 1.5″ | Heavy rate coils
- C59-352 – With 220-300lbs – 2″ | Heavy rate coils
- C59-354 – With 220-300lbs – 2.5″ | Heavy rate coils
- **None of these coils below suit TRD Pro Struts, but these do
(6 reviews) -
80 Series Land Cruiser (1990-1997)FREE SHIPPING
within 48 US StatesTimbren ABSTOFLC1A Active Off Road Toyota 80 Series Front Bump Stops
- Suits Land Cruiser 80 Series and Lexus LX450
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- 1″ Extended Bump Stop over stock
- Easy Installation
- Satisfaction Guarantee
- Lifetime Warranty
- Suits 1990 to 1997 Toyota Landcruiser 80 Series Front End
- NOTE: Some early model 80 Series didn’t come with the threaded holes in place in the frame. Adding nutserts may be required.
- Click here for instructions
(13 reviews) -
TimbrenFREE SHIPPING
within 48 US StatesTimbren ABSTRFK Tacoma U-Bolt flip and Active Bump Stops Kit | 2005-2023 Tacoma
- Suits 2005 to 2023 Toyota Tacoma 4×4 models
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Includes incorporated u-bolt flip kit for additional clearance below
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation
- Satisfaction Guarantee
- Lifetime Warranty
- Click here for instructions
(14 reviews) -
All Pro OffroadFREE SHIPPING
within 48 US StatesOn Sale All November!!All Pro Complete CV Boot Kit | Long Travel for 2005-23 Tacoma
- Complete CV boot replacement kit – Suits 2005-2023 Toyota Tacoma
- Includes inner OEM-Style CV boots and outer LONG TRAVEL CV boots and all related clamps
- Does not require long travel suspension to run this kit
- Qty 2 – OEM-Style Neoprene Long Travel Outer CV Boots
- Qty 2 – OEM-Style Neoprene Inner CV Boots
- Qty 4 – CV Grease Packets
- Qty 8 – Ear-Type CV-Joint Clamps
- Qty 2 – Axle C-Clips and Snap Rings
- Qty 1 – CV Clamp Crimp Pliers
(15 reviews) -
Brake LinesOn Sale All November!!
Extended Rear Brake Lines +4″ for Toyota Tacoma 2005-2023 (Red)
- American made D.O.T. Certified extruded teflon core, stainless steel braided and coated with a PVC cover
- 4″ longer than stock for long travel suspension lifts
- Suits the following vehicles: Toyota Tacoma 2005-2015, Toyota Tacoma 2016+
- Can be used with any lift height, however these are extra long for long travel rear shocks
- Sold as a pair with new retaining clips
(9 reviews) -
GX460 (2010-2023)On Sale All November!!
Dobinsons 1.5-3.5″ IMS Lift Kit | Lexus GX460 2010-2023
- Every IMS suspension option from Dobinsons to lift your Lexus GX460 all on one page
- Here you can lift from a low height up to the maximum bolt-on lift height by making your selections below
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base Kit Includes 2 Front IMS Struts, 2 Rear IMS Shocks, and 4 Coil Springs
(21 reviews) -
Bump StopsOn Sale All November!!
Dobinsons Rear Upper Coil Isolators | 4Runner FJ Cruiser GX470 GX460
- Pair of aftermarket upper rubber coil isolators for Toyota and Lexus SUV’s
- These sit on top of the rear coil springs to properly isolate them from the frame, and also add the internal bump stop that these vehicles are intended to have
- If you have had an airbag conversion done incorrectly, or if you had to modify your isolators to add air bags and now need to go back, these are what you need
- Sits on top of rear coils
- Aftermarket version of the OEM Toyota Part Number 48302-35050
- OE quality upper rubber coil isolators with built-in bump stops
- Sold as a pair, 1 per vehicle needed
- Suits:
- 2003-2024 Toyota 4Runner
- 2007-2019 Toyota FJ Cruiser
- 2002-2009 Lexus GX 470
- 2010-2023 Lexus GX 460
(8 reviews) -
SuspensionOn Sale All November!!
Dobinsons IMS59-60687 Rear 2.6″ IFP Shocks Pair | Land Cruiser 80 Series (4-5″ lift)
- Suits Land Cruiser 80 Series and Lexus LX450
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
- 680mm extended, 421mm compressed
- Bump stop extensions and longer brake lines must be run with these longer shocks
(18 reviews) -
SuspensionOn Sale All November!!
Dobinsons IMS59-60786 Front Ext Travel 2.6″ IFP Shocks Pair | Land Cruiser 100 Series (2-2.5″ lift)
- Suits Toyota Land Cruiser 100 Series and Lexus LX470 Front End
- Requires full diff drop kit and UCA’s before installation
- Front shocks only. To order full kit, click here
- SOLD IN PAIRS
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
- 470mm extended and 315mm compressed
(17 reviews) -
SuspensionOn Sale All November!!
Dobinsons Tacoma IMS Kit for 2005 to 2023 4×4 (0-3.5″)
- 4×4 Access Cab models come with 1″ front lift from the factory. Lift heights listed are for Dual cab 4×4 models. Subtract 1″ for access cab models
- Long bed models require the next step up in leaf spring, or they will sit 1″ less high. L59-110-R lift only 1″ on long bed models
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Fully rebuildable and re-valvable shocks
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Multiple different leaf springs options to match up with the added weight you’ve put on your truck or not
- Choose your desired suspension parts to build the kit best suited to your weight and desired lift height
- Base kit usually starts with front coils, struts, rear leaf springs, poly bush kit, rear shocks, 1 pair greasable pins. You choose what you want
(13 reviews) -
FirestoneFREE SHIPPING
within 48 US StatesFirestone 4135 Coil-Rite Rear Helper Airbags for 0-1.5″ Lift | 4Runner FJ Cruiser GX470 GX460
- Suits all 3rd/4th/5th Gen 4Runners, FJ Cruiser, GX470, GX460 for 0-1.5″ of lift
- Also Suits Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- Complete kit – 1 per vehicle
- Inserts inside your rear coil springs to add additional load support
- Manually inflate or deflate the air bags to add or remove support or height
- Perfect for people who tow, or regularly load up fully and need additional height or support
- Route the airlines to your rear bumper or a suitable place to easily add or remove air to the bags
- Fitment Notes: NOTE: Custom modifications may be required for lifted applications to ensure air bags are properly supported. If using on a lifted application, do not follow Firestone bump stop/jounce cut instructions. You will need to determine where to cut based on your lift amount (not cutting off as much depending on lift height)
- Installation Manual, Click Here
- We also sell a Firestone air compressor and gauge kit to fill this up from inside the vehicle
(5 reviews) -
DobinsonsOn Sale All November!!
Dobinsons UB59-436K U-Bolt Kit (2 Pairs)
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Includes 4 U-bolts, enough for 2 leaf springs
- These are square at the top
- Requires 2″ lift leaf springs to ensure proper fitment
- Photo for Illustration purposes only
(9 reviews) -
4Runner 4th Gen (2003-2009)On Sale All November!!
Dobinsons GS59-575 Rear Long Travel Shocks Pair
- Suits Toyota 4Runner 2003-2024 and FJ Cruiser (all years), and Lexus GX470 with 2-3.5″ of lift.
- Not suitable for vehicles with KDSS
- Sold as a pair
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Long Travel, 730mm extended, 425mm compressed
- Recommended to run with Timbren Rear Bump Stops
- Replacement Brake Lines are required: Extended Brake Lines
- Bump stop extensions or longer bump stops are required with these shocks!!
- Cannot be used on vehicles with KDSS
(15 reviews) -
Bump StopsOn Sale All November!!
Dobinsons BS59-560 Front Adjustable Bump Stop Pair
- Adjustable front soft hit bump stop made from high quality rubber
- Suits 0-30mm Extension
- The BS59-560 rubber only is 1-3/8″ (35mm) thick, and the included spacers are 5, 10, 20mm
- Sold as a pair, replacing two front bump stops
- Ideal for those who bottom out often in their offroad driving
- Suits Tacoma, 4Runner, GX470, GX460, 200 Series & more (see below for full vehicle list)
- Installation Instructions
(10 reviews) -
Tire and WheelFREE SHIPPING
within 48 US StatesDigital Tire Deflator + Digital Tire Gauge + and 53pc Tire Repair Kit Combo Kit
- Our Recovery Gear and Air management Systems are some of the best in the business! Now you get the best of both worlds with our Combo Kits!
- Tire Repair Kit
- Digital Tire Gauge
- Digital Tire Deflator
(3 reviews)