Dobinsons Spring & Suspension

Showing 571–600 of 1057 resultsSorted by popularity

Full Suspension Kits - GX460
Dobinsons 1.5-3.5″ Pre-Assembled Twin Tube Lexus GX460 Coilovers
- Suits Lexus GX460 4×4 Models 2010-2023, with or without KDSS
- Set of twin tube coilovers for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Choose the appropriate coils to match the lift height you want that also suits the added weight you have on the vehicle
- Nitrogen Gas Charged Struts, Superior Design, thicker walls, longer travel
- Direct Bolt-in Replacements, Pre-Assembled and Ready To Go
- 32mm Bore Size, Double Chromed 18mm Rod
- 51mm Body Size
- High Quality Fuch’s German Shock Oil
- NOK Multi-Lip Seals
- Teflon Piston Rings
- Natural Rubber Bushings for the Best NVH Dampening
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Built to order
- Lift heights are subject to variations in vehicle years as well as accessory weights, engine differences, and other variables.
Rated 5.00 out of 5
(5 reviews)
From $890.00 Select options
MRA Remote Resi 3-Way Adjustable Monotube
FREE SHIPPING
within 48 US States
Dobinsons MRA 2.6″ Smoothie Shock – 12″ Travel 3-Way Adjustable
- Dobinsons MRA 2.6″ Body Universal Smoothie Shock – offered in 10″, 12″ and 14″ Travel lengths
- MRA92-A2522 – 12″ Travel Shock
- Extended Length: 33.42″ / 851mm
- Compressed Length: 21.48″ / 547mm
- Reservoir Length: 12″ / 300mm
- Hose Length: 19.6″ / 500mm
- Rod Diameter: 22mm / 7/8″
- MRA means Monotube Remote (reservoir) Adjustable
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 5140 HV900 Hard Chrome Plated, Heat Treated 22mm micro-polished high strength shock shaft.
- Shaft minimum tensile strength exceeding 700MPA / 100 PSI and hardness exceeding 46HRC
- 2.6″ Shock Body precision honed to +/- 0.04mm
- Zinc plated DOM 3mm steel shock body for ultimate corrosion protection
- Parker Steel braided, rubber coated high pressure hoses
- Lightweight CNC machined low friction floating piston
- 3 Stage FMJ+HNBR long life, low friction sealing system
- PTFE lined high quality spherical bearings
- Fully rebuildable and tunable
- Dual rate design with high quality slider & cross-over rings
- 64mm Finned Reservoir
- 350V.I. High performance damper fluid
- T6061 CNC machined ultra high flow race piston
- Includes universal reservoir isolators and hose clamps
- Replacement shims and misalignment spacers are included
- SINGLE SHOCK INCLUDED (Add two to cart for pair)
- WARNING PLEASE READ this notice about misalignment spacers
- Fully detailed guide and owners manual – MUST READ before ordering to understand setting up the shocks
- Limited Warranty details down below
Rated 5.00 out of 5
(7 reviews)
$650.00 Add to cart
Recovery
Dobinsons Offset Aluminum Hawse Fairlead
- Machined Aluminum
- Offset fairlead to position the rope feed to the winch drum centered properly
- Suits all ARB front bumpers that usually use a roller fairlead
- If your bumper has the winch mounted feet-forward, and the bottom hole also goes through the fairlead, you’ll need this offset one
- Narrow profile, doesn’t protrude
Rated 5.00 out of 5
(2 reviews)
$85.00 Add to cart
Sidekick/Tracker (1988-1998)
FREE SHIPPING
within 48 US States
Dobinsons Lift Kit | Suzuki Sidekick + Geo Tracker 1988-1998
- Dobinsons Complete Suspension Lift Kit for the Suzuki Sidekick and Tracker LWB (Long Wheel Base) 1988-1997
- These lift 40mm (1.6″) Front and 30mm (1.2″) Rear, as they come, or you can add the coil spacers to gain extra lift height
- Take note that adding extra lift height to the front will result in reduces camber and it could be harder to get a proper wheel alignment without custom modifications to get a better alignment
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Superior Designed Nitro Gas Shocks, thicker walls, longer travel
- Japanese NOK Multi-Lip seals
- Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- GS57-620 struts are 501mm extended, 304mm compressed
- GS57-621 rear shocks are 505mm extended, 318mm compressed
Rated 5.00 out of 5
(20 reviews)
From $1,200.00 Select options
On Backorder
Sidekick/Tracker (1988-1998)
Dobinsons C57-047 Rear Coils | Sidekick + Tracker LWB Heavy – Pair
- Dobinsons C57-047 Rear 30mm Heavy Load (110-220LBS Constant Rear End Load) Lifted Coil Springs for the Suzuki Sidekick and Tracker LWB (Long Wheel Base) 1988-1997
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
Rated 5.00 out of 5
(15 reviews)
$240.00 Add to cart
On Backorder
Sidekick/Tracker (1988-1998)
Dobinsons C57-016 Front Coils | Suzuki Sidekick and Tracker – Pair
- Dobinsons C57-016 Front 40mm Lifted Coil Springs for the Suzuki Sidekick and Tracker 1.6L 16 Valve engine 1988-1997
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
Rated 5.00 out of 5
(10 reviews)
$240.00 Add to cart
4Runner 2nd Gen (1990-1995)
FREE SHIPPING
within 48 US States
Dobinsons Toyota 4Runner 2.0″ Suspension Kit for 1990-1995
- Suits Toyota 4Runner 1990-1995 USA models with torsion bars up front and coil springs in the rear
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Multiple coil spring options
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Choose which specific parts you’d like from the menu below
Rated 5.00 out of 5
(10 reviews)
From $1,215.00 Select options
4Runner 2nd Gen (1990-1995)
FREE SHIPPING
within 48 US States
Dobinsons Toyota 4Runner 2.0″ IMS Suspension Kit for 1990-1995
- Suits Toyota 4Runner 1990-1995 USA models with torsion bars up front and coil springs in the rear
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Multiple coil spring options
- Shocks are Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Choose which specific parts you’d like from the menu below
Rated 5.00 out of 5
(6 reviews)
From $1,755.00 Select options
Snorkel
FREE SHIPPING
within 48 US States
Dobinsons Land Cruiser 200 Series Snorkel Kit for 2016-2021
- 200 Series Snorkel Kit – Suits Toyota Land Cruiser 200 Series 2016-2021 Models
- Smooth body, no writing or logos on the body
- Rotationally molded using precision CNC shaped aluminum dies
- Increases air intake height to allow safer water crossings and reduce dust intake
- Increased air intake height rams cooler, cleaner air into the engine increasing engine performance
- The higher the intake, the less dust is in the air
- Manufactured from high quality UV resistant LLDPE
- Snorkel Kits include template and all mounting hardware
- There’s a different snorkel to fit the 2015 and older models here
Rated 5.00 out of 5
(8 reviews)
$355.00 Add to cart
On Backorder
Rear Drawers
Dobinsons DW59-025K Wing Side Panel Kit for 200 Series LX570
- Suits Toyota Land Cruiser 200 Series 2008-2019 or Lexus LX570 without 3rd row seats
- Complete wing kit for both sides to suit Dobinsons rear drawer systems
- Includes vertical and horizontal pieces, brackets and hardware
- Fills in the side parts left exposed once drawers have been installed, providing a neat finish
- Drawers are sold separately
Rated 5.00 out of 5
(3 reviews)
$260.00 Add to cart
Tundra 3rd Gen (2022-2025+)
FREE SHIPPING
within 48 US States
Dobinsons IMS59-60885 2.6″ IFP Rear Shocks Pair | Long Travel
- Suits 2022-2025+ Toyota Tundra Rear with 1.0-3.0″ of Lift – Long Travel
- These long travel rear shocks require extended sway bar links, extended brake lines, and 1.5″ bump stop extensions or longer bump stops
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Japanese NOK Multi-Lip seals
- Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
Rated 5.00 out of 5
(18 reviews)
$650.00 Add to cart
Tundra 2nd Gen (2007-2021)
Dobinsons L59-122-R Leaf Springs Pair for Toyota Tundra 07-21 (1000LBS+)
- L59-122-R – 5 + 2 Leaves (7 leaf pack) Raised Height (55mm, 2.25″ Lift) Heavy Duty for a constant load of at least 1000LBS (450KG)
- To make this leaf pack into the L59-121-R (1 step down) lighter pack, remove the #3 leaf
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Sold as a pair
- Note: Greasable bush kits (PB59-1102K), greasable pins (SP59-060), and u-bolts (UB59-437K) are available separately. These do not come with bushings
- These are intended for people with a slide in camper, custom bed and canopy or a combination of 1000LBS of constant rear weight in addition to the stock bed weight, and to maintain 2-2.25″ of lift over stock
- Photo for illustration purposes
Rated 5.00 out of 5
(6 reviews)
$1,100.00 Add to cart
Montero NM NP NS NT 2000+
Dobinsons C43-125 Rear 1.75″ Lift Coil Springs for Montero 2000-06 – Pair
- 1.75-2.0″ rear lift with 110-220LBS constant weight on a Mitsubishi Montero 2000-06 USA model
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
Rated 5.00 out of 5
(9 reviews)
$405.00 Add to cart
80 Series Land Cruiser (1990-1997)
FREE SHIPPING
within 48 US States
Dobinsons Front Adjustable Panhard Rod | 80 Series Right Hand Drive 1990-1997
- FOR RIGHT HAND DRIVE MODELS ONLY (Japanese import, etc.)
- Replaces OE Front Panhard Rod, adjustable to suit lift height
- Zinc plated steel then E-coated with all hardware and high quality rubber bushes supplied
- Off-car adjustable, cannot be set while fully installed
- For 3″ to 6″ of lift
- Rubber Bushes offer greater flexibility than polyurethane, providing maximum articulation
- Image for illustration purposes only
Rated 5.00 out of 5
(5 reviews)
$345.00 Add to cart
Full Suspension Kits - Xterra
FREE SHIPPING
within 48 US States
Dobinsons 2.5″ Lift MRA Extended Travel Coilovers 3-Way Adjustable – Nissan Xterra 2005+
- Extended Travel Coilovers Suit Nissan Xterra 4×4 Models (2005-2015) – lifts 2.5″
- These extended travel struts REQUIRE aftermarket UCA’s for full travel, like Dobinsons
- Looking for a quick and easy way to lift your Xterra? This is your answer
- Dobinsons MRA are height adjustable by a fully threaded body
- The Dobinsons MRA Coilovers will come pre-assembled with new struts, coils and top mounts
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Reservoir Bracket and Hardware, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Length specs – 278mm compressed and 410mm extended
- Photos for illustration purposes
- FITTING INSTRUCTIONS
- Instructions for setting coil seat height
- Link to the matching rear shocks
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
Rated 5.00 out of 5
(6 reviews)
From $1,820.00 Select options
4Runner 3rd Gen (1996-2002)
FREE SHIPPING
within 48 US States
Dobinsons 2-2.5″ 3-Way Adjustable MRA 4Runner Coilovers for 1996-2002
- Suits 1996-2002 Toyota 4Runner 4×4 Models
- Looking for a quick and easy way to lift your 4Runner? This is your answer
- Extended Travel MRA59-A222 Coilovers – 458mm extended, 335mm compressed lengths
- Dobinsons MRA are height adjustable by a fully threaded body
- The Dobinsons MRA Coilovers will come pre-assembled with new struts, coils and top mounts
- Fully rebuildable and re-valvable
- SOLD IN PAIRS – READY TO BOLT IN
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Includes Universal Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Photos for illustration purposes
- Instructions for setting coil seat height
- It’s recommended that these coilovers to be run with a diff drop kit and aftermarket UCA’s for coilover clearance and correct travel
- Link to matching rear shocks
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
Rated 5.00 out of 5
(2 reviews)
$1,820.00 Select options
Bronco (2021-2025+)
Dobinsons Ford Bronco Front Coils | C19-562 – Pair
- Dobinsons C19-562 Suits Ford Bronco:
  
  2 Door – Base, Big Bend, Black Diamond, Outer Banks WITH 2.3L – with 110-195LB Load
  
  2 Door – Base, Big Bend, Black Diamond, Outer Banks WITH 2.7L and Stock Weight
  
  4 Door – Base, Big Bend, Outer Banks – Stock Load
- Coil Springs Can Only Be Fitted To Dobinsons IMS19-50098
- Coils Provide Approximately 3″-4″ Lift Above Non Sasquatch Models & 2″-3″ Lift Above Sasquatch Models
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Choose what color you would like
- Made in Australia
- Sold in Pairs
Rated 5.00 out of 5
(14 reviews)
$270.00
Coil Color Clear

Dobinsons Ford Bronco Front Coils | C19-562 - Pair quantity
Select options This product has multiple variants. The options may be chosen on the product page
Full Suspension Kits - Tundra 1st Gen
FREE SHIPPING
within 48 US States
Dobinsons 2-2.5″ 3-Way Adjustable MRA Lift Kit | Tundra 2000-2006
- Suits 2000-2006 Toyota Tundra 4×4 with V8 Engine
- Adjustable height front struts, lift from 2″ to 2.5″
- Choose from no added rear lift, a Quick Ride block kit or Add-A-Leaf (AAL) Kit
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Universal Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Includes 2 Front MRA Struts, 2 Rear MRA Shocks, 2 Front Coil Springs (a pair), and multiple Rear Lift Options
- It’s recommended that these coilovers to be run with a diff drop kit and aftermarket UCA’s for coilover clearance and correct travel and alignment
- The included droop spacer goes on top of the strut, under the first washer, if lifting more than 2.0″ (see attached photo)
Rated 5.00 out of 5
(11 reviews)
From $2,700.00 Select options
GX460 (2010-2023)
FREE SHIPPING
within 48 US States
Dobinsons 2-3.5″ Extended Travel Pre-Assembled IMS Coilovers for Lexus GX460
- Suits 2010-2023 Lexus GX460 4×4 Models
- Looking for a quick and easy way to lift your GX460? This is your answer
- Select your desired lift height and spring rate – we’ll take care of the rest!!
- Dobinsons IMS are height adjustable by a fully threaded body
- The Dobinsons IMS Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
- Fully rebuildable and re-valvable
- Extended Travel – 575mm fully extended, 430mm compressed
- SOLD IN PAIRS – READY TO BOLT IN
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Photos for illustration purposes
- Instructions for setting coil seat height
- To run these Extended Travel coilovers, new UCA’s need to be added for proper articulation and correct wheel alignment. A diff drop kit is also recommended to minimize CV binding at full droop
- Click to see Matching rear shocks
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
Rated 5.00 out of 5
(5 reviews)
$1,199.00 Select options
Full Suspension Kits - Frontier D41
FREE SHIPPING
within 48 US States
2022 Frontier Lift Kit Dobinsons 2-3″ 3-Way Adjustable MRA Kit | Frontier D41 2022+
- Complete Dobinsons MRA 3-Way Adjustable Suspension Kit for your 2022+ Nissan Frontier D41 Truck
- Choose what front and rear lift heights and load ratings you would like, as well as what parts you would like to include
- Nothing is included in the order if you don’t select it from below
- Adjustable height front struts (requires coil to be compressed above the coil seat to adjust height)
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI CNC machined components for precise tolerances
- Parker Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile
- strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO 9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Photos show a full kit with many parts selected. If you don’t select a part from below, it is not included
Rated 5.00 out of 5
(10 reviews)
From $3,320.00 Select options
200 Series Land Cruiser ARMORED
FREE SHIPPING
within 48 US States
Dobinsons Front Monster Struts Pair for Armored Land Cruiser 200 Series XHD
- Made for Armored Vehicles ONLY – Level B6 or B7 Armored Toyota Land Cruiser 200 Series
- Mammoth 70mm body housing with a massive volume of high quality German shock oil
- 20mm Diameter heavy duty chrome piston rods
- 45mm Extra Large Pistons
- 4mm Heavy Duty Wall thickness, double the thickness of regular shock walls
- Threaded adjustable spring seat height for adjustment and additional heat dissipation
- 1 piece drop forged lower strut mount for maximum strength
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- See all suitable armored coil spring options HERE
- Sold in Pairs
Rated 5.00 out of 5
(10 reviews)
$700.00 Add to cart
Sequoia 3rd Gen (2023-2025+)
Dobinsons C59-853V Rear Coil Springs Pair
- Dobinsons C59-853V Rear Coils for the 2023+ Toyota Sequoia
- Lifts 3″ with 440LBS constant load on a standard model, and 2″ with 440LBS of constant load on a TRD Pro (TRD Pro comes 1″ lifted from the factory)
- This also fits the 2021+ Land Cruiser 300 Series, gives 50mm lift with 280-400KG constant added weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- Variable Rate Coils
- Longer shocks required, the factory shocks are not long enough to run with these coils
- Select from Twin Tube, IMS Monotube or MRA 3-Way Adjustable with Remote Resi
Rated 5.00 out of 5
(1 review)
$305.00
Coil Color Clear

Dobinsons C59-853V Rear Coil Springs Pair quantity
Select options This product has multiple variants. The options may be chosen on the product page
Full Suspension Kits - Tundra 2nd Gen
FREE SHIPPING
within 48 US States
Dobinsons 3-Way Adjustable Tundra 2.0″-3.0″ MRA Suspension Kit | 2007-2021
- Suits Toyota Tundra 2007-2021 Models with 5.7L V8 Gas Engine
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- Coils are teal. Struts and shocks are black
- Front MRA Coilovers are assembled at the standard coil seat height
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg, EDP Surface Protection
- Requires lower mount clearancing to fit the larger lower leg of the new coilover (see attached photo)
- See attached photo for correct hose routing
- CNC TIG Precision Welded Body End Mounts
- Includes Reservoir Brackets and Hardware and Sticker Pack
- Full 2 year limited warranty, no set rebuild time period, fully rebuildable shocks
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Choose your desired suspension parts to build the kit best suited to your weight
- Multiple lift height and load ratings available
- Front coilover assembly instructions
- New UCA’s are required for proper coilover and hose clearance, see all options
- Aftermarket wheels with +18 Offset or less REQUIRED to avoid reservoir + hose rubbing at full lock
Rated 5.00 out of 5
(12 reviews)
From $4,450.00 Select options
Full Suspension Kits - 100 Series
Dobinsons 100 Series lift kit | Toyota Land Cruiser IFS DIESEL 1998-2007 (all shock options)
- Build a full suspension replacement here for your Toyota Land Cruiser 100 Series 1998-2007, with all possible options listed on this one page
- THIS PAGE IS FOR DIESEL ENGINE MODELS ONLY
- Lexus LX470 and Land Cruiser 100 Series share the same suspension parts
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- A base kit includes 2 Front Shocks, Pair Front Torsion Bars, 2 Rear Shocks, and 2 Rear Coil Springs
- You can choose from twin tube, IMS Monotube or MRA 3-Way Adjustable Monotube shocks in the drop down menus
Rated 5.00 out of 5
(10 reviews)
From $1,330.00 Select options
100 Series Land Cruiser IFS (1998-2007)
Dobinsons 100 Series Torsion Bars Pair for DIESEL ONLY 1998-2007
- For DIESEL powered Land Cruisers from 1998 to 2007
- Total length is 1210mm, 34mm bar thickness
- These WILL NOT fit a V8 gas model Land Cruiser, they’re too long
- Increased spring rate to improve handling and lift front end
- Powder coated black for a long lasting finish
- Replaces OE torsion bars without modification
- Torsion bars must be installed with 2/3 suspension down travel and 1/3 up travel to ensure a good ride
- Comes as a set, 1 per vehicle
Rated 5.00 out of 5
(2 reviews)
$440.00 Select options
Suspension
Dobinsons SD59-821 Big Bore Steering Damper – Toyota Pickup & 4Runner (1979-1985)
- Suits Pre-1985 Leaf Spring front end Toyota Pickup and Toyota 4Runner 4×4’s
- Induction Hardened Rods for strength, no Viscosity Drop due to High Shear Stability
- Cellular Foam Cell Insert, Teflon Piston Rings
- Excellent Viscosity Temperature Performance
- NOK Triple Lip Oil Seals, High Quality Fuchs German Oil
- Replaces OE steering damper, bolts into place
Rated 5.00 out of 5
(3 reviews)
$135.00 Add to cart
Ranger 2019+ (US Spec)
Dobinsons L19-132-R Leaf Springs Pair | Ford Ranger 2019+ USA Spec (40mm w/600LBS)
- Suits USA Spec Ford Ranger 2019-2022+
- L19-132-R lift 40mm (1.6″) over stock height with 600LBS of added constant weight – lifts more with less weight
- Pack has 7 leaves
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- These are leaf springs ONLY and don’t come with bushings or any other parts. Scroll down for add-ons that go with these springs
- Photo for illustration purposes only, not of actual part number
Rated 5.00 out of 5
(5 reviews)
$570.00 Add to cart
55 Series (1970-80)
FREE SHIPPING
within 48 US States
Dobinsons GS15-639S Front Twin Tube Shocks Pair | Land Cruiser FJ55
- Front Twin Tube shocks for 1970-1980 Toyota Land Cruiser FJ55
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Sold in Pairs
Rated 5.00 out of 5
(9 reviews)
$310.00 Add to cart
4Runner 4th Gen (2003-2009)
Dobinsons Drawers for 4th Gen 4Runner 2003-2009
- Suits Toyota 4Runner 4th Gen from 2003-2009 without rear A/C
- 1.6mm Zinc Plated Robust Steel Construction
- 12mm Heavy Duty Plywood Panels with Marine Carpet Covering
- Built-in Heavy-Duty Fridge Slide (The top of the left side drawer slides in and out)
- 8 x Heavy Duty Stainless Steel Tie Down Points
- Comprehensive outer wing trim kit to provide a factory fit (optional)
- Installation of drawers may REQUIRE drilling and bolting through floor if suitable holes are not in the floor already
- Requires removal of any 3rd row seating or any sliding floor/deck
- Aluminum Edging Protection
- Heavy duty lockable latches
- Sliding portion is not changeable from one side to the other
- Not compatible with 3rd row seat installed
- Massive 150KG (330LB) Drawer Capacity on Heavy Duty Roller Bearing System
- Ships to the nearest freight terminal on a pallet for you to pick up, or you can add home delivery below. We will be in touch with that delivery address
Rated 5.00 out of 5
(3 reviews)
From $1,465.00 Select options
Dobinsons
Dobinsons Spare Tire Trash & Storage Bag
- Dobinsons Tire Trash & Storage Bag is the perfect solution for storing your trash and extra gear whilst out on the tracks
- Boasting a huge 70L capacity and removable divider to separate items
- Manufactured from 1680D PVC, with high quality buckles and zips
- Has a mesh bottom design to allow for draining of unwanted moisture and liquids
- Dobinsons Tire Trash & Storage Bag is designed to look good and built to last
- Also included: 10L Dry Storage Bag (Single)
(0 reviews)
$95.00 Add to cart