Shop

Showing 451–480 of 2181 resultsSorted by popularity

Sequoia 3rd Gen (2023-2025+)
Dobinsons Rear Coil Spring Options | Toyota Sequoia 2023+ – Pair
- Suits Toyota Sequoia 2023-2025+, choose the appropriate lift height that also matches any added weight you’ve put on the car
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Coils are Sold in Pairs
- Lifting the rear 2″ requires a new Panhard Rod to re-center the axle
- Lifting 1″ or more, new rear sway bar links are necessary
- 2″ of rear lift also requires longer shocks than stock
Rated 5.00 out of 5
(14 reviews)
From $300.00 Select options
Brake Lines
FREE SHIPPING
within 48 US States
Performance Front Brake Lines for Tacoma 05-23 Tundra 99-06 FJ Cruiser 07-14 (BLACK)
- American made D.O.T. Certified extruded teflon core, stainless steel braided and coated with a PVC cover
- Increase your brake pedal feel with stainless brake lines to replace the factory rubber brake lines
- Stock length, works with or without a suspension lift
- Suits the following vehicles: Toyota Tacoma 2005-2023, Toyota Tundra 1999-2006, FJ Cruiser 2007-2014
- Sold as a pair with new retaining clips
- Photo for illustration purposes only
- This set is BLACK in color
Rated 5.00 out of 5
(26 reviews)
$120.00 Add to cart
Brake Lines
FREE SHIPPING
within 48 US States
Extended Rear Brake Lines +2″ for Toyota Tacoma 2005-2023 (Black)
- American made D.O.T. Certified extruded teflon core, stainless steel braided and coated with a PVC cover
- 2″ longer than stock for most suspension lifts (not long travel)
- Suits the following vehicles: Toyota Tacoma 2005-2015, Toyota Tacoma 2016+
- Can be used with a non-lifted truck, or with any lifted truck where the shocks aren’t long travel
- Sold as a pair with new retaining clips
- This set is BLACK in color
Rated 5.00 out of 5
(6 reviews)
$120.00 Add to cart
Full Suspension Kits - Tundra 2nd Gen
FREE SHIPPING
within 48 US States
Dobinsons 2.25-3.0″ Pre-Assembled IMS Coilovers for Toyota Tundra 2007-21 4×4
- Suits Toyota Tundra 2007-2021 4×4 Models with 5.7L V8 Gas Engine
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- Looking for a quick and easy way to lift your Tundra? This is your answer
- Select your desired lift height and tell us your weight – we’ll take care of the rest!!
- Dobinsons IMS are height adjustable by an adjustable circlip. Springs must be compressed to change the clip height
- All are assembled at the standard lowest clip height
- The Dobinsons IMS Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
- Fully rebuildable and re-valvable
- 615mm extended, 445mm compressed strut lengths
- SOLD IN PAIRS – READY TO BOLT IN
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- Full 2 year limited warranty, no set rebuild time period
- Photos for illustration purposes – Tundra IMS coilovers use a slightly different coil seat as shown in secondary photos
- Instructions for setting coil seat height
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle. Adding 2.5″ or more lift, new UCA’s should be added for proper articulation and correct wheel alignment
- Link to Matching rear shocks
- Add an optional lean correction spacer for the driver’s side here
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
Rated 5.00 out of 5
(5 reviews)
From $1,580.00 Select options
Sale!
Brakes
FREE SHIPPING
within 48 US States
Price Increase Coming May 12th
Powerbrake X-Line 80 Series Land Cruiser Front Big Brake Kit (17″+ Wheels) 1990-1997
1990-1997 Toyota Land Cruiser 80 Series and Lexus LX450 Big Brake Kit Includes:
- This is the kit for 17″+ Wheels. There’s a different kit for 16″ wheels
- X-Line billet 6-piston off-road calipers (pair)
- High-performance brake pads, pre-loaded into the calipers
- 2-Piece 13.7″ x 1.34″ 72-vane discs
- Semi-float disc drive system allows for radial disc expansion and contraction
- Curved, directional cooling vanes
- Billet caliper mounting brackets
- Stainless steel braided brake lines
- Provided brake lines connect the caliper to the axle housing, then extended brake lines (sold separately) can be used as well for taller lift kits, connecting from the axle to the frame
- All necessary mounting hardware for quick, easy bolt-on installation
- Comprehensive fitment and bed-in instructions
- Now Includes Upgraded Powerbrake Pads, PB05 Compound – highest level 4×4 brake pads available – made in Japan
- Manufactured, finished and packaged 100% in South Africa
- REQUIRES 17″ WHEELS FOR ADEQUATE CALIPER CLEARANCE
Rated 5.00 out of 5
(11 reviews)
Original price was: $4,350.00.Current price is: $3,800.00.
Caliper Color Clear

Powerbrake X-Line 80 Series Land Cruiser Front Big Brake Kit (17"+ Wheels) 1990-1997 quantity
Select options This product has multiple variants. The options may be chosen on the product page
Full Suspension Kits - FJC Early
FREE SHIPPING
within 48 US States
Dobinsons 1.5-3.5″ Pre-Assembled IMS Toyota FJ Cruiser Coilovers | 2006-2009
- Suits Toyota FJ Cruisers from 2003-2009 4×4 Models
- Looking for a quick and easy way to lift your FJ Cruiser? This is your answer
- Select your desired lift height and load rate – we’ll take care of the rest!!
- Dobinsons IMS are height adjustable by a fully threaded body
- The Dobinsons IMS Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
- Fully rebuildable and re-valvable
- Extended Travel – 567mm extended, 417mm compressed
- SOLD IN PAIRS – READY TO BOLT IN
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Photos for illustration purposes
- Instructions for setting coil seat height
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle. Adding 2.5″ or more lift, new UCA’s should be added for proper articulation and correct wheel alignment
- Link to Matching rear shocks
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
Rated 5.00 out of 5
(4 reviews)
$1,330.00 Select options
80 Series Land Cruiser (1990-1997)
FREE SHIPPING
within 48 US States
Dobinsons 3-Way Adjustable 0-3.5″ MRR Lift Kit | Toyota Land Cruiser 80 Series 1990-97
- Suits Land Cruiser 80 Series and Lexus LX450
- The terms MRA and MRR are used interchangeably. The A stands for Adjustable in the part number or SKU
- Complete MRR suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to match OE fitment specs
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base kit includes front and rear coils and shocks, you can add any other parts you need
- Choose your coils and load carrying ability, anywhere from 0″ up to 3.5″ of Lift
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- External Remote Oil Reservoir with dual speed compression adjustment
- Single Piece Lower Leg, Natural Rubber Bushings Top and Bottom
- Triple Lip Oil Seal for Superior Lifespan
- Direct Bolt-on, Fully Rebuildable Design
- Pre-Charged with Nitrogen, Ready to be Assembled and Installed
- EDP Surface Protection, 3mm Heavy Duty Wall Thickness
- Includes Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Installation Instructions of the MRA Shocks
- Full 2 year limited warranty, no set rebuild time period
Rated 5.00 out of 5
(12 reviews)
From $3,400.00 Select options
Sale!
GX460 (2010-2023)
RCI Gas Tank Skid Plate | 4th & 5th Gen 4Runner GX470 GX460 2003-2024
- Fits all Lexus GX470 and GX460 Models, and all 4th and 5th Gen Toyota 4Runner 2003-2024
- Black powder coat available for rust resistant, durable and high quality finish
- Simple bolt on installation
- All hardware and instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling
- Smooth, flat surface that easily slides over obstacles
- Material: 3/16” Steel or 1/4” 5052 Aluminum Alloy
- Weight: 3/16” Steel- 52lbs. Aluminum- 26lbs.
- Finish: Heavy Duty Black Powder Coat or Bare Metal
- Made in the USA
Rated 5.00 out of 5
(7 reviews)
Original price was: $379.99.Current price is: $341.99. Select options
Suspension
FREE SHIPPING
within 48 US States
Dobinsons GS59-632 Front Twin Tube Shocks Pair | Land Cruiser 70 Series
- For 1/90 to 5/93 Toyota 70 Series models, LJ70 LJ72 LJ73 LJ77 with Square Headlights
- Also suits 1994+ RJ70, RJ73, KZJ 70/71/73 with Square Headlights
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
Rated 5.00 out of 5
(10 reviews)
$310.00 Add to cart
On Backorder
LJ70, LJ72, LJ73, LJ77 - 90-93 - Square Headlights
Dobinsons C59-244 2.5″ Front Coil Springs | LAND CRUISER 70 Series Multiple Models – Pair
- Dobinsons C59-244 Front Coil Springs for TOYOTA LAND CRUISER LJ70, LJ72, LJ73, LJ77 1/90-5/93 W/SQUARE HEADLIGHTS and 70 Series Prado I, Land Cruiser II, LJ78/79, RJ77, KZJ78 – 87-96
- Lifts 2.5″ with bumper AND winch weight of 110-150lbs.
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold as a Pair
Rated 5.00 out of 5
(7 reviews)
$300.00 Add to cart
Gladiator JT (2020-2025+)
Jeep Gladiator Long Range Auxiliary Fuel Tank (17gal) 2020+ 3.6L V6
- Suits Jeep Gladiator JT Trucks from 2020-2024 onwards with the 3.6L V6 Gas engine
- Not suitable for Diesel versions
- This is an additional tank that fits on the left side of the driveshaft, it holds 17 gallons, and uses a transfer pump to fill your main tank when you hit a switch
- 17 gallon capacity, fits on opposite side of OE gas tank for maximum clearance!!
- 17 gallons plus your original 22 gallon tank gives you a capacity of 39 gallons in total!!
- Tank fills using the OEM gas door and supplied parts
- Tank uses a transfer pump to fill the main tank, 2L per minute pump rate
- Exhaust modification required – exhaust needs to be replaced with aftermarket/custom or available LRA replacement exhaust kit listed below (tank goes where OE exhaust was routed). Exhaust kit components
- Fitting time – approximately 5.5 hours
- Part Number JGJTPA
- Fitting Instructions – Intended to be installed by a certified mechanic
- This item ships on a pallet to the nearest Truck Freight terminal for you to pickup. We will be in touch with you regarding the nearest freight terminal, unless you add home delivery fee below.
- This product can not be sold or shipped to residents in California, as it will not pass SMOG. Do not order this product if you live in California!!
- MADE IN AUSTRALIA
- Nearest Freight Terminal Finder – Use this to decide if you want home delivery or pickup at the nearest terminal
Rated 5.00 out of 5
(5 reviews)
$2,445.00 Select options
Dobinsons
FREE SHIPPING
within 48 US States
Dobinsons Toyota Tundra 2.25-3.0″ IMS Suspension Kit for 2007-2021
- Complete IMS suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Photos show full kit with most options purchased – choose what you’d like
- Coils are specifically suited to provide comfort and lift
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Choose your desired suspension parts to build the kit best suited to your weight
- IMS struts – Clip height adjustable front struts, massive 2.6″ size body front and rear with 60mm pisons, IFP (Internal Floating Piston) technology
- 4 Clip height settings. Lowest height is stock/OE height. Each clip height adds approximately 1/2″ of lift. Use clip heights to fine tune lift height or offset for vehicle lean
- FRONT ASSEMBLY INSTRUCTIONS
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
Rated 5.00 out of 5
(7 reviews)
From $2,900.00 Select options
Air Compressors
FREE SHIPPING
within 48 US States
ARB CKMTA12 12V High Performance Twin Air Compressor
- Motors are water sealed, 100% ball bearing equipped (i.e. no bushings), and feature a unique linear brush pre-load system for extra long life, low heat and quiet operation throughout the life of the unit.
- Compact twin motor, dual cylinder design makes it the highest flowing compressor in its class (voltage vs. size). Highest air flow rate of any 12V compressor of its size on the market at 174LPM [6.16CFM].
- Full wiring loom included for simplified installation and easy plug-in connectivity to Air Locker control solenoids. (Note: Air Locker Manifold Kit #171503 required to mount solenoids).
- Motors are internally thermal protected against extreme temperature damage. Over-pressure safety valve equipped. Equipped with dual heavy duty Maxi-Fuses for professional in-line circuit protection and true circuit redundancy in case of a fault.
- Compressor pistons are equipped with a heavy duty European made cylindrical roller bearing. Hard-anodized cylinder bores and PTFE (Teflon) impregnated carbon fibre piston seals for reduced friction and maximum trouble free life.
- 12V, Draws 50 Amps max, 6.16 CFM, 150 PSI max, 100% Duty Cycle
- 10.9 x 7.5 x 4.1 inches actual dimensions, 19.4 LBS with all items included
Rated 5.00 out of 5
(4 reviews)
$639.95 Add to cart
Snorkel
FREE SHIPPING
within 48 US States
Safari Snorkel SS450HP – Toyota 4Runner 5th Gen 2010-2024
- Suits Toyota 4Runner 5th Gen models from 2010 to 2024
- Raises air intake to prevent water ingestion, while also allowing vehicles to utilize clean air when driving in dusty conditions.
- Vehicle specific design and factory airbox adaption fitment.
- Manufactured using durable, UV stable cross linked polyethylene material.
- Supplied as a comprehensive kit, including the necessary fasteners and mounting brackets.
- Unique air ram design acts as a highly efficient water separator to remove rain water form incoming air stream.
- Designed and manufactured in Australia
- 10% higher CFM for this application over other brand snorkels, due to large body design
- Requires cutting and drilling of the fender and A-pillar. Full instructions and template provided.
Rated 5.00 out of 5
(20 reviews)
$627.00 Add to cart
Firestone
Daystar Universal Airbag Cradle Kit Tacoma and Tundra
- Enjoy full suspension travel and the benefits of air bags with the Daystar Air Bag Cradle Kit
- Fits most full-size trucks and SUVs running 6” diameter bellow-type rear air bags
- Mounts to your truck’s lower air bag suspension mounting bracket—Installation Instructions (PDF)
- Allows full factory differential drop without fear of bag damage
- Provides room for air bags to safely cycle with no loss of wheel travel
- Crafted from super-tough Daystar polyurethane
- Kit includes two cradles and mounting hardware
- Proudly built in the USA
- Your Daystar Air Bag Cradle Kit is backed by a Lifetime Warranty
- Daystar cradle mounts to top of leaf spring, airbag mounts to frame above only
Rated 5.00 out of 5
(5 reviews)
$88.00 Read more
80 Series Land Cruiser (1990-1997)
Dobinsons C59-313 Rear Coil Springs | Land Cruiser 80 Series – Pair
- Suits Land Cruiser 80 Series and Lexus LX450
- C59-313 4″ lift with 400-750lbs of constant weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 545/555mm free height, 21mm wire, 318LBF/in rate
- Sold in Pairs
Rated 5.00 out of 5
(18 reviews)
$450.00 Add to cart
Pickup (1988-1995)
Dobinsons Toyota Pickup/Hilux 1986-1995 Rear Polyurethane Leaf Spring Bush Kit
- For any lift height, or no lift. These are OE replacement bushings.
- Use with Dobinsons Leaf Springs or any other brand that can accept OE-size bushings
- Pressing of OE bushings may be necessary during removal and installation
- Replaces OE bushings in all 6 positions of rear leaf springs
- Greasable bolts are sold in pairs, sold separately
Rated 5.00 out of 5
(3 reviews)
$75.00 Add to cart
SPC
FREE SHIPPING
within 48 US States
SPC 25465 | UCA’s for Land Cruiser 200 Series & LX570 2008-2021 Pair
- Suits all Toyota Land Cruiser 200 Series and Lexus LX570 models – 2008-2021
- Improved clearance to get around the spring bucket
- 80° of articulation in its ball joint
- SPC’s arm gives you maximum droop travel.
- SPC’s arms have +1° of caster built into them
- Arm will get you 0° to +4° of caster and ±2° of camber
- Maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming
- Installation Instructions
- We offer replacement ball joints as well
Rated 5.00 out of 5
(10 reviews)
$895.96 Add to cart
Dirt King Fabrication
FREE SHIPPING
within 48 US States
Dirt King Toyota Tacoma Tubular Ball Joint UCA’s Pair for 2005-2023
- Suits 2005-2023 model Toyota Tacoma 2nd and 3rd Gens – 6 Lug models only
- Pro 4 Series Ball Joints – Forged SAE 4140 housing, 38° of articulation, and induction-hardened ball stud for maximum strength and smoother steering feel
- SilentSpin Bushings – Maintenance-free, greaseless, and engineered for quiet, free-spinning articulation
- Geometry Corrected – Improved caster and pivot angles deliver better handling and control with up to 3” of lift
- 4130 Chromoly Construction – Built with high-strength chromoly tubing and reinforced gussets for extreme durability
- Fully Rebuildable Design – All wear items are replaceable for long-term reliability
- Corrosion-Resistant Finishes – Zinc-plated hardware and black powder coat protect against the elements
- Professionally MIG Welded – Ensures structural integrity for demanding off-road use
- Preassembled – Quick, hassle-free installation with no guesswork
- Includes new control arm bolts so you can cut the old ones out if that makes it easier for removal
- Made in the USA – Built with pride and quality you can trust
- Installation Instructions
Rated 5.00 out of 5
(4 reviews)
$881.00 Add to cart
On Backorder
Trooper
Dobinsons Heavy Duty Torsion Bar Pair for Isuzu Trooper (Acura SLX) 1992 to 2002
- For all Isuzu Trooper and Acura SLX models from 1992 to 2002
- 1220 mm total length, 30mm bar thickness
- Increased spring rate to improve handling and lift front end
- Powder coated black for a long lasting finish
- Replaces OE torsion bars without modification
- Torsion bars must be installed with 2/3 suspension down travel and 1/3 up travel to ensure a good ride
Rated 5.00 out of 5
(5 reviews)
$550.00 Add to cart
Dobinsons
FREE SHIPPING
within 48 US States
Dobinsons 12V Zenith 6.0 CFM Air Compressor Kit High Output
- 170L/ minute Air Flow
- Integrated Air Tank
- 2 x 1/8” NPT Auxiliary fittings
- Carry Bag
- 6.5 m Rubber Hose
- Pressure Cut Off Switch
- Safety Release Valve
- Removable Base for Permanent Mounting
- Quick Release Tyre Chuck
Rated 5.00 out of 5
(17 reviews)
$450.00 Add to cart
Tacoma 2nd Gen (2005-2015)
Dobinsons 0-3″ Lift Kit Toyota Tacoma 2005-2015 with Blocks or AAL
- Suits 2005-2015 Toyota Tacoma 4×4 Models
- 4×4 Access Cab models come with 1″ front lift from the factory. Lift heights listed are for Dual cab 4×4 models. Subtract 1″ for access cab models
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- You can now select to use Wheeler’s Add-A-Leaf Kit instead of the Quick Ride Kit if you’d prefer
- Select front coils based on front end accessory load and desired lift height
Rated 5.00 out of 5
(10 reviews)
From $960.00 Select options
GX470 (2002-2009)
FREE SHIPPING
within 48 US States
Dobinsons GX470 Snorkel Kit for Lexus GX470 2003-2009
- Lexus GX470 Snorkel Kit – Suits 2003-2009 Models
- Rotationally molded using precision CNC shaped aluminum dies
- Increases air intake height to allow safer water crossings and reduce dust intake
- Increased air intake height rams cooler, cleaner air into the engine increasing engine performance
- Increased air intake height rams cooler, cleaner air into the engine increasing engine performance
- Manufactured from high quality UV resistant LLDPE
- Snorkel Kits include template and all mounting hardware
Rated 5.00 out of 5
(8 reviews)
$375.00 Add to cart
Brake Lines
FREE SHIPPING
within 48 US States
80 Series Extended Brake Line Kit for 1991-1992 ONLY – for 0-4″ lift
- Suits 1991 to 1992 80 Series Land Cruisers ONLY
- Extended brake line kit to suit lift heights of up to 4″ of lift ONLY
- Extruded PTFE (Teflon) Hose with Braided Stainless Steel Cover and Clear PVC Outer Jacket
- Permanently Crimped Zinc-Plated Fittings
- Includes 1 front and 1 rear extended brake line
- Includes Retention Clips
- Meets DOT MVSS-106
- Always compare stock brake lines and fittings to the new ones before disconnecting the old lines
- Instructions
Rated 5.00 out of 5
(35 reviews)
$141.00 Add to cart
80 Series Land Cruiser (1990-1997)
Dobinsons C97-147VTB Dual Rate Rear Coils | Black – Pair
- Suits Land Cruiser 80 Series and Lexus LX450 and 2022-2025+ Tundra
- For a 1990-1997 Toyota Land Cruiser 80 Series, they lift 2.5″ with 400LBS+ constant rear end weight
- For a 2022-2025+ Toyota Tundra, they lift 2″ with 800-1000lb rear end load (exceeds GVWR)
- Lifts more with less weight on the vehicle
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Black
- Sold in Pairs
- VT Series Dual Rate Coils for maximum travel and the best ride quality
- Also made in the teal color
Rated 5.00 out of 5
(15 reviews)
$525.00 Add to cart
Bronco (2021-2025+)
Dobinsons Ford Bronco Rear Coils | C19-569V – Pair
- Dobinsons C19-569V Suits Ford Bronco:
  
  4 Door – BL, Wildtrack, First Edition – 150-350Lb Load
- These Coil Springs were made for Dobinsons IMS19-50099 but have been known to fit Bilstein Sasquatch shocks
- Coils Provide Approximately 3″-4″ Lift Above Non Sasquatch Models & 2″-3″ Lift Above Sasquatch Models
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Choose what color you would like
- Made in Australia
- Sold in Pairs
Rated 5.00 out of 5
(11 reviews)
$300.00
Coil Color Clear

Dobinsons Ford Bronco Rear Coils | C19-569V - Pair quantity
Select options This product has multiple variants. The options may be chosen on the product page
80 Series Land Cruiser (1990-1997)
FREE SHIPPING
within 48 US States
Dobinsons Front Adjustable Hydro Bump Stop Kit | Toyota 80 Series Land Cruiser 1990-97
- Complete Front hydro bump stop kit to replace the factory coil isolator and internal bump stops
- Suits Toyota Land Cruiser 80 Series and Lexus LX450 1990-1997
- CNC Machined 50mm Billet Aluminum Piston
- EDP Coated 3mm Thick 56mm Steel Body
- Threaded Body For Height Adjustment to adjust when the stop will engage
- Supplied with both Interchangeable Super Quiet Rubber Rod End & Hard Nylon
- 30mm Micro Polished Hard Chrome Shaft
- Slow Rebound Valving To Prevent Bucking
- Removable Dust Cover Boot For Stealth Appearance
- Fully Rebuildable & Tunable
- O-Ring Travel Indicator
- Heavy Duty Extreme-Race style Triple Seal Design
- Nitrogen Gas Charged & Tunable (100 to 300 PSI)
- Pre-charged to 110 PSI
- Extra Short Dead Lengths For Compact Fitment
- Includes full fit kit, 2 hydro bump stops, and spacer blocks for frame-mounted external bump stops
- Kit Includes:
  
  HBS59-012FK Mounting Kit
  
  HBS56-009 or HBS56-006 Hydraulic Bump Stops (choose below)
- HBS56-009 – 46mm (1.8″) stroke | 188mm (7.4″) extended | 142mm (5.6″) compressed | 105mm (4.0″) thread length
- HBS56-006 – 50mm (2.0″) stroke | 238mm (9.4″) extended | 188mm (7.4″) compressed | 125mm (5.0″) thread length
- Use Cases:
  
  HBS59-009 – Use if your shocks Compressed Length is between 382mm (15″) – 390mm (15.35″) – Usually 0-3″ Lift Length Shocks
  
  HBS59-006 – Use if your shocks Compressed Length is between 390mm (15.35″) – 467mm (18.38″) – For 4″ Lift Length Shocks or longer
Rated 5.00 out of 5
(9 reviews)
$900.00 Select options
Sale!
Brakes
FREE SHIPPING
within 48 US States
Price Increase Coming May 12th
Powerbrake X-Line 4×4 Front Toyota Tacoma Big Brake Kit for 2005-2023
2005-2023 Toyota Tacoma Big Brake Kit Includes:
- X-Line billet 6-piston off-road calipers (pair)
- High-performance brake pads, pre-loaded into the calipers
- 1-Piece 350mm x 34mm (13.77″ x 1.33″) 48-vane discs
- Curved, directional cooling vanes
- Billet caliper mounting brackets
- Stainless steel braided brake lines
- All necessary mounting hardware for quick, easy bolt-on installation
- Comprehensive fitment and bed-in instructions
- For 6-Lug models only (Pre-Runner and 4×4 models)
- Now Includes Upgraded Powerbrake Pads, PB05 Compound – highest level 4×4 brake pads available – made in Japan
- Manufactured, finished and packaged 100% in South Africa
- REQUIRES 17″ WHEELS FOR ADEQUATE CALIPER CLEARANCE
Rated 5.00 out of 5
(9 reviews)
Original price was: $3,050.00.Current price is: $2,675.00.
Caliper Color Clear

Powerbrake X-Line 4x4 Front Toyota Tacoma Big Brake Kit for 2005-2023 quantity
Select options This product has multiple variants. The options may be chosen on the product page
Dobinsons
Dobinsons Fog Light Kit for Dobinsons Bumpers
- Suits:
  
  BU59-5559 Toyota Tacoma Bull Bar
  
  BU59-5557 Toyota 4Runner Bull Bar
  
  BU59-5558 Toyota Tundra Bull Bar
- Includes Fog Light Bulbs and Wiring Harness
- Rating IP68
- 12V Halogen Bulbs
- 1 Kit needed per vehicle
Rated 5.00 out of 5
(3 reviews)
$195.00 Add to cart
80 Series Land Cruiser (1990-1997)
FREE SHIPPING
within 48 US States
Dobinsons Rear Adjustable Hydro Bump Stop Kit | Toyota 80 Series Land Cruiser 1990-1997
- Complete hydro bump stop kit to replace the factory coil isolator and internal bump stop
- Suits the Rear of Toyota Land Cruiser 80 Series and Lexus LX450 1990-1997
- CNC Machined 50mm Billet Aluminum Piston
- EDP Coated 3mm Thick 56mm Steel Body
- Threaded Body For Height Adjustment to adjust when the stop will engage
- Supplied with both Interchangeable Super Quiet Rubber Rod End & Hard Nylon
- 30mm Micro Polished Hard Chrome Shaft
- Slow Rebound Valving To Prevent Bucking
- Removable Dust Cover Boot For Stealth Appearance
- Fully Rebuildable & Tunable
- O-Ring Travel Indicator
- Heavy Duty Extreme-Race style Triple Seal Design
- Nitrogen Gas Charged & Tunable (100 to 300 PSI)
- Pre-charged to 110 PSI
- Extra Short Dead Lengths For Compact Fitment
- Includes full fit kit, 2 hydro bump stops, and spacer blocks for frame-mounted external bump stops
- Kit Includes:
  
  HBS59-019FK Mounting Kit
  
  HBS56-009 or HBS56-006 Hydraulic Bump Stops (choose below)
- HBS56-009 – 46mm (1.8″) stroke | 188mm (7.4″) extended | 142mm (5.6″) compressed | 105mm (4.0″) thread length
- HBS56-006 – 50mm (2.0″) stroke | 238mm (9.4″) extended | 188mm (7.4″) compressed | 125mm (5.0″) thread length
- Use Cases:
  
  HBS59-009 – Use if your shocks Compressed Length is between 382mm (15″) – 390mm (15.35″) – Usually 0-3″ Lift Length Shocks
  
  HBS59-006 – Use if your shocks Compressed Length is between 390mm (15.35″) – 467mm (18.38″) – For 4″ Lift Length Shocks or longer
- Installation Instructions
Rated 5.00 out of 5
(7 reviews)
$900.00 Select options