Your cart is currently empty!
Dobinsons Spring & Suspension
Showing 481–510 of 1043 resultsSorted by popularity
-
AccessoriesOn Sale All November!!Dobinsons 4×4 Portable 12V High Output Air Compressor Kit with Bag + Hose and Gauge
- 12 Volt, Heavy Duty
- Air Compressor
- Thermal Overload Protection
- Air Flow: 72L/min – Maximum Pressure: 150 psi
- Single 40mm Piston
- 2.4m Power Cable with Battery Clips
- 5m PU Hose
- In-Line Pressure Gauge & Fuse
- Rubber Anti-Vibration Feet
- Hi-Temp 7.5m P.A Air Hose
- Quick Release Tyre Chuck
- Removable Air Filters
- Permanent Magnetic Motor
- Removable Base for Permanent Mounting
- Includes 3 Nozzle Adaptors & Carry Bag
(10 reviews) -
Sale!
SnorkelOn Sale All November!!Dobinsons 4×4 Replacement Snorkel Head – 85mm / 3.34″
- Rotationally molded using precision CNC shaped aluminum dies
- Increases air intake height to allow safer water crossings and reduce dust intake
- Increased air intake height rams cooler, cleaner air into the engine increasing engine performance
- Manufactured from high quality UV resistant LLDPE
- Does NOT include replacement hose clamp
(0 reviews) -
ArmorOn Sale All November!!
Dobinsons 200 Series Winch Bumper | Land Cruiser 200 Series 2008 to 8/2015
- Airbag and winch compatible
- Driving Light Mounts
- Heavy Duty Black Powder Coat Finish
- 3mm Thick Main Body, 4mm + 5mm Thick Brackets, 1.6mm Bash Plates, 51-76mm top tubes depending on vehicle
- Includes Turn Signals, Fog Lights, and all Required Hardware for Installation
- Includes filler panels for under the headlights to fill the gap to the bumper. Old bumper cover does not get cut or get reused
- Separate Winch Cradle System, making installation faster
- Parking sensor, front camera and radar compatible (can’t mount parts in front of them)
- Cannot reuse headlight washers with this bumper
- Supplied Black, but can be painted by your paint shop
- Suits 12000 LB Low Mount Winches with non-integrated control box
- Installation instructions
- Ships to the nearest freight terminal for pickup, unless you add the home delivery fee below. We will be in touch to let you know the terminal location
(4 reviews) -
Sale!RecoveryOn Sale All November!!
Dobinsons 4×4 Kinetic Snatch Tow Recovery Rope 28900 LBS (13100 KG) 30FT
- Rated at 28,900 LBS (13,100 KG), 7/8″ Diameter (22mm), 30FT Total Length
- UV & Water Resistant, made from High Quality 66 Grade Nylon
- Lightweight high strength Double Braided 24 Strand Design
- Spliced & Stitched End Loops with Protective Sleeves
- NATA Approved, Australian Laboratory Tested
(7 reviews) -
Sale!80 Series Land Cruiser (1990-1997)On Sale All November!!
Dobinsons 80 Series Front Bump Stop Extensions Kit (1.0-2.0 in)
- Suits the Front of all Toyota Land Cruiser 80 Series from 1990 to 1997
- 1″ (25mm) extensions stackable up to two per spot for a total of 2″ (50mm) of thickness
- Durable Solid Steel Spacers
- Sold as a Kit for inner and outer rear bump stops
- The inner goes inside the coil spring on the inner bump stop
- The outer goes between the mount and the bump stop on the frame
- Space down your bump stops to prevent shock bottom outs at full compression
- Keep your tires out of your fenders if they’re oversized by spacing down the bump stops
- General bump stop extension guidelines (will vary based on brand of shocks and bump stops used)
- Dobinsons 0-3″ lift shocks: Extensions are not necessary, unless running oversized tires
- Dobinsons 4-5″ lift shocks: Front needs about .5″ of bump stop extension, rear needs 2” of bump extension
- Dobinsons 6″ lift shocks: Front needs about 1.5” bump stop extension, rear needs a 3” extension or 2″ extension with extended length bump stops
- We offer replacement bump stops as well Here
(2 reviews) -
Sale!Rav4On Sale All November!!
Dobinsons Toyota Rav4 2.0″ Lift Kit for 2019-2024
- Dobinsons Rav4 2.0″ Lift Kit for Toyota Rav4 from 2019-2024 models
- Complete 2.0″ suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- RWD vehicles will yield about 1″ more lift in the front
- Hybrid vehicles will yield about 0.5″ less lift
- Plug in Hybrid will yield about 1″ less lift
- Superior Designed Nitro Gas Shocks, thicker walls, longer life
- Japanese NOK Multi-Lip seals
- Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings
- Double Chrome hardened rods
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Coils are offered in 3 different colors
- Struts and shocks are black in color
- Front OE Strut boot and bump stop will need to be reused
- Includes 2 Front Struts, 2 Rear Shocks, and 4 Coil Springs
(5 reviews) -
Sale!Rear DrawersOn Sale All November!!
Dobinsons DW59-028K Wing Side Panel Kit for Lexus GX470
- Suits Lexus GX470 2003-2009
- Complete wing kit for both sides to suit Dobinsons rear drawer systems
- Includes vertical and horizontal pieces, brackets and hardware
- Fills in the side parts left exposed once drawers have been installed, providing a neat finish
- Drawers are sold separately
(3 reviews) -
Sale!DobinsonsOn Sale All November!!
Dobinsons IMS59-50229 Monotube 2.2″ IFP Rear Shocks Pair
- Suits the rear of Toyota Hilux Revo 2016+ and Toyota Tacoma 1998-2004 (for long travel)
- For the Tacoma, these are considered long travel shocks for maximum droop. Additional parts may be required to get that travel out of the truck, such as bump stop extensions, longer brake lines, etc
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Dobinsons IMS59-50229 Specifications: 650mm extended, 416mm compressed, 56mm body size
(11 reviews) -
Sale!Tundra 3rd Gen (2022-2024)FREE SHIPPING
within 48 US StatesOn Sale All November!!Dobinsons MRA59-A887 2.6″ 3-Way Adjustable Rear Shocks Pair
- Suits 2022+ Toyota Tundra Rear with 1.0-3.0″ of Lift
- These shock run softer internal valving than the MRA59-A687 (which are better suited to heavy loads)
- 3-way adjustable valving – Adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 22mm / 7/8″ shaft diameter
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Piggyback Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- 674mm extended, 420mm compressed
- Installation Instructions of the MRA Shocks
(15 reviews) -
Sale!Shocks + Struts - 3rd Gen 4RunnerFREE SHIPPING
within 48 US StatesOn Sale All November!!Dobinsons MRA59-A225 3-Way Adjustable Rear Shocks Pair | 3rd Gen 4Runner
- Suits 3rd Gen Toyota 4Runner 1996-2002
-
Suits Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your springs, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- 530mm extended length, 344 compressed
- SOLD IN PAIRS
- Includes Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Photos for illustration purposes
(15 reviews) -
Sale!Bronco (2021-2024+)On Sale All November!!
Dobinsons Ford Bronco Front Coils | C19-566 – Pair
- Dobinsons C19-566 Suits Ford Bronco:
- 2 Door – BL, Wildtrack, FE 2.7L – 110-200lb Load
- 4 Door – BS, BL 2.3L – 110-200lb Load
- 4 Door – First Edition, BL, Black Diamond 2.7L – 0-110Lb Load
- Coil Springs Can Only Be Fitted To Dobinsons IMS19-50098
- Coils Provide Approximately 3″-4″ Lift Above Non Sasquatch Models & 2″-3″ Lift Above Sasquatch Models
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Choose what color you would like
- Made in Australia
- Sold in Pairs
(13 reviews) -
Sale!Full Suspension Kits - Sequoia 2nd GenFREE SHIPPING
within 48 US StatesOn Sale All November!!Dobinsons 2.0-3.0″ 3-Way Adjustable MRA Coilovers for Toyota Sequoia 2008-2022
- Suits Toyota Sequoia 2008-2022 Models with 5.7L V8 Gas Engine
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- Looking for a quick and easy way to lift your Sequoia? This is your answer
- Coils are teal. Struts are black
- Includes C92-3016650 Front Coil Springs, Inner Diameter – 3.0″, Length – 16″, Spring Rate – 650lb/in
- All are assembled at the standard coil seat height, you adjust on the vehicle to the height you’d like
- The Dobinsons MRA Coilovers will come pre-assembled with new struts, coils and top mounts and hardware
- Fully rebuildable and re-valvable
- SOLD IN PAIRS – READY TO BOLT IN
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Requires lower mount clearancing to fit the larger lower leg of the new coilover (see attached photo)
- See attached photo for correct hose routing
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Front coilover assembly instructions
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle
- New UCA’s are required for proper coilover and hose clearance, see all options
- Aftermarket wheels with +18 Offset or less REQUIRED to avoid reservoir + hose rubbing at full lock
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
(2 reviews) -
Sale!Sequoia 3rd Gen (2023-2024+)On Sale All November!!
Dobinsons C59-819V Rear Coil Springs Pair
- Dobinsons C59-819V Rear Coils for the 2023+ Toyota Sequoia and 2022+ Land Cruiser 300 Series (30mm lift)
- Lifts the Sequoia 1.0″ with Stock Weight on a standard model and 0″ with stock weight on a TRD Pro (TRD Pro comes 1″ lifted from the factory)
- Also suits 2024+ Land Cruiser 250 – 1.6″ Lift with 550-770LBS constant rear added weight
- Suits 2024+ Tacoma – 2.25″ lift with 175-330lbs constant weight added, 1.25″ lift with 440-660lbs constant weight added.
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- Variable Rate Coils
- Longer shocks are necessary at this lift height
- Select from Twin Tube, IMS Monotube or MRA 3-Way Adjustable with Remote Resi
(15 reviews) -
Sale!Frontier D41 2022+FREE SHIPPING
within 48 US StatesOn Sale All November!!Dobinsons MRA45-A653 3-Way Adjustable Rear Shocks Pair | 2022+ Nissan Frontier
- Suits 2022-2024+ Nissan D41 Frontier
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI CNC machined components for precise tolerances
- Parker Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile
- strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Sold in Pairs
(13 reviews) -
Sale!Full Suspension Kits - XterraOn Sale All November!!
Dobinsons 2.5″ Lift IMS Extended Travel Coilovers for Nissan Xterra 05+
- Extended Travel Coilovers Suit Nissan Xterra (2005-2015) 4×4 Models – Lifts 2.5″ over stock
- These extended travel struts REQUIRE aftermarket UCA’s for full travel, like Dobinsons
- Looking for a quick and easy way to lift your Xterra? This is your answer
- Dobinsons IMS are height adjustable by a fully threaded body
- The Dobinsons IMS Coilovers will come pre-assembled with new struts, coils and top mounts
- Fully rebuildable and re-valvable
- SOLD IN PAIRS – READY TO BOLT IN
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Length specs – 278mm compressed and 410mm extended
- Photos for illustration purposes
- Instructions for setting coil seat height
- Link to the matching rear shocks
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
(2 reviews) -
Sale!DobinsonsOn Sale All November!!
Dobinsons Suzuki Camber Bolt Kit
- Suits these vehicles: Suzuki Sidekick 1988-1998, Suzuki Escudo 1988-1998, Geo Tracker 1988-1998, Suzuki Grand Vitara 1998-2005, Suzuki Escudo 1998-2005, Suzuki XL7 2001-2005
- ±1.2° for Lower Control Arm Camber Adjustment, 14mm bolt size
- Essential when lifting Vehicles
- Easy to adjust and set once installed
- Includes Instructions
(4 reviews) -
Sale!Tundra 3rd Gen (2022-2024)On Sale All November!!
Dobinsons Adjustable Rear Lower Control Arms Pair for Tundra + Tacoma
- Suits all 2022+ Toyota Tundra and 2024+ Toyota Tacoma
- Comes with high quality rubber OE style bushings installed for maximum flexibility, and zero noise
- Made from HSLA (High Strength Low Alloy) Steel
- 40mm OD and 6mm wall thickness with support brace
- Oversized adjusters and rod thickness for maximum strength and durability with double-nut locking feature
- Zinc plated, then E-coated black, for the ultimate finish and protection
- Sold as a pair
(4 reviews) -
Sale!Tundra 3rd Gen (2022-2024)On Sale All November!!
Dobinsons Front Coil Spring Options | Toyota Tundra 2022+ – Pair
- Suits Toyota Tundra 2022-2024+, choose the appropriate lift height that also matches any added weight you’ve put on the truck
- Intended to be run with Dobinsons front struts
- Hybrid Models lift 1-1.5″ less lift than listed here
- These will NOT suit a TRD PRO Strut, they’re a different size
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(12 reviews) -
Sale!200 Series Land Cruiser ARMOREDOn Sale All November!!
Dobinsons Rear Monster Shocks Pair for Armored Land Cruiser 200 Series XHD
- Made for Armored Vehicles ONLY – Level B6 or B7 Armored Toyota Land Cruiser 200 Series
- Mammoth 70mm body housing with a massive volume of high quality German shock oil
- 20mm Diameter heavy duty chrome piston rods
- 45mm Extra Large Pistons
- 4mm Heavy Duty Wall thickness, double the thickness of regular shock walls
- Threaded adjustable spring seat height for adjustment and additional heat dissipation
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- See all suitable armored coil spring options HERE
- Sold in Pairs
(9 reviews) -
Sale!Pickup / Hilux (1979-1985)On Sale All November!!
Dobinsons Front U-Bolts – 2 Pairs – 1979-1985 Toyota Pickup/4Runner Front
- Combination kit of front u-bolts for 1979-1985 Toyota Pickup (Hilux) and 4Runner Front ends
- This is a combination with a pair of UB59-449-3K and a pair of UB59-667K, as they’re different on one side than the other.
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Includes 4 U-bolts, enough for 1 vehicle
- Requires 2″ lift leaf springs to ensure proper fitment
- Photo for illustration purposes only. These are round and square at the top to suit the axle properly
(0 reviews) -
Sale!SuspensionFREE SHIPPING
within 48 US StatesOn Sale All November!!Dobinsons MRA59-A711 3-Way Adjustable MRA Rear Shocks Pair | Tundra 2007-2021
- 3-way adjustable valving – Adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
(16 reviews) -
Sale!4Runner 5th Gen (2010-2024)On Sale All November!!
Dobinsons Front Winch Bumper for Toyota 4Runner 2014-2024
- Suits 5th Gen Toyota 4Runner from 2014-2024 (will not fit 2010-2013)
- Winch compatible, up to 12,000 LB winches
- Driving Light Mounts
- Optional Fog Lights – Here for more details
- Optional Front Driving Lights (as shown in photos) – Here for more details
- Cutting of the original front plastic bumper is required
- Heavy Duty Black Powder Coat Finish
- 3mm Thick Main Body, 4mm + 5mm Thick Bracket, 1.6mm Bash Plates, 51mm top tubes
- Includes LED Turn Signals and all Required Hardware for Installation
- Separate Winch Cradle System, making installation faster. (does not include winch)
- Supplied Black, but can be painted by your paint shop
- Suits 10,000 and 12,000 LB Low Mount Winches – requires offset fairlead
- Installation Instructions
- Truck freight shipping is usually to the nearest freight terminal, or commercial address with forklift
- Ships to the nearest freight terminal on a pallet for you to pick up, unless you add home delivery. We will be in touch with that delivery address
(3 reviews) -
Sale!Tundra 3rd Gen (2022-2024)On Sale All November!!
Dobinsons Twin Tube Rear Shocks Pair | Toyota Tundra 2022+
- Suits the rear of a 2022+ Toyota Tundra with 2-2.5″ of Lift
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings
- Double Chrome hardened rods
- Metal shock boot to protect rod from damage
- Sold in Pairs
(8 reviews) -
Sale!Full Suspension Kits - 200 SeriesOn Sale All November!!
Dobinsons 1-2.5″ Pre-Assembled IMS Coilovers for Toyota Land Cruiser 200 Series
- Suits Toyota Land Cruiser 200 Series and Lexus LX570 2008-2021 Models with 5.7L V8 Gas Engine
- Looking for a quick and easy way to lift your 200 Series? This is your answer
- Select your desired lift height and tell us your weight – we’ll take care of the rest!!
- Dobinsons IMS are height adjustable by a fully threaded body
- The Dobinsons IMS Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
- Fully rebuildable and re-valvable
- 606mm extended, 438mm compressed
- SOLD IN PAIRS – READY TO BOLT IN
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Photos for illustration purposes
- Instructions for setting coil seat height
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle. Adding 2.5″ or more lift, new UCA’s should be added for proper articulation and correct wheel alignment
- Link to Matching rear shocks
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
(8 reviews) -
Sale!Full Suspension Kits - FJC EarlyFREE SHIPPING
within 48 US StatesOn Sale All November!!Dobinsons 1.5-3.5″ 3-Way Adjustable MRA FJ Cruiser Coilovers for 2006-2009
- Suits Toyota FJ Cruiser 2006-2009
- Looking for a quick and easy way to lift your FJ Cruiser? This is your answer
- Select your desired lift height and spring rate – we’ll take care of the rest!!
- Dobinsons MRA are height adjustable by a fully threaded body
- The Dobinsons MRA Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- Extended Travel – 567mm extended, 417mm compressed
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
- Resi installation instructions
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle. Adding 2.5″ or more lift, new UCA’s should be added for proper articulation and correct wheel alignment
- Link to Matching rear shocks
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
(8 reviews) -
Sale!DobinsonsOn Sale All November!!
Dobinsons Rear 1/2″ Coil Spacers (Pair) Jeep Wrangler JL and Gladiator
- Suits 2018+ Jeep Wrangler JL 2-door and 4-door and 2020+ Jeep Gladiator JT
- Adds 1/2″ of lift height
- High Quality Polyurethane, maintains height over time
- Perfect fit between OE isolator and coil seat
- Sold in Pairs
- Lasts longer than rubber
- Easy to add lift height for worn coils or when added weight has squatted down the rear
(2 reviews) -
Sale!80 Series Land Cruiser (1990-1997)On Sale All November!!
Dobinsons 3.5-4″ IMS Lift Kit Builder | Land Cruiser 80 Series
- Suits Land Cruiser 80 Series and Lexus LX450
- Complete IMS suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- **Kit photo shows with additional options purchased**
- Coils are specifically suited to match OE spec and height
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- IMS Shocks are Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
- Base Kit should include front and rear shocks and coils, 5 degree castor plate kit, Front and Rear adjustable panhard rods, front sway bar extensions and rear proportioning valve extension
- A double-cardan front drive shaft is required for any lift of 4″ or more on this vehicle – we don’t sell them
- You must choose what coils, shocks and other components you want to add
(12 reviews) -
Sale!Gladiator JT (2020-2024+)On Sale All November!!
Dobinsons C29-245V Rear 2.0″ Lift Coils for Jeep Gladiator (880-1210LB Load) – Pair
- Suits 2020+ Jeep Gladiator JT Pickup Truck.
- Lifts 2.0″ with 880-1210LBS of constant weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Teal or Black
- Sold in Pairs
(7 reviews) -
Sale!Gladiator JT (2020-2024+)On Sale All November!!
Dobinsons C29-249VB Rear 3.0″ Lift Coils for Jeep Gladiator – Extra Heavy Load – Pair
- Suits 2020+ Jeep Gladiator JT Pickup Truck
- Lifts 3.0″ with 880-1210LBS rear end constant weight (bumper, camper, etc)
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Black
- Sold as a Pair
(6 reviews)
