Your cart is currently empty!
Dobinsons
Showing 721–750 of 1040 resultsSorted by popularity
-
40 Series Land Cruiser Early (1960-1979)
Dobinsons TOY-029-R Rear Heavy Load Leaf Springs Pair for FJ40 BJ40 up to 1979
- Rear Leaf Springs for the Toyota FJ40 BJ40 up to 1979 with 25mm spring eyes
- 45mm rear lift with 300LBS rear end weight
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Sold as a pair, springs only
(6 reviews) -
40 Series Land Cruiser Early (1960-1979)Dobinsons HJ45-7L-F Front Leaf Springs Pair for FJ/BJ40 FJ/BJ45 up to 1979
- Front Leaf Springs for the Toyota FJ/BJ40 and FJ/BJ45 up to 1979 with 25mm eyes
- 45mm front lift with 400LBS constant weight on an FJ40/BJ40
- 45mm front lift with stock front end weight on an FJ45/BJ45
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Sold as a pair, leaf springs only
(5 reviews) -
LJ70, LJ72, LJ73, LJ77 - 90-93 - Square HeadlightsFREE SHIPPING
within 48 US StatesDobinsons 2.5″ IMS Lift Kit Toyota Land Cruiser 1/90-5/93 LJ70/72/73/77 | 1994+ RJ70/73 KZJ 70/71/73/78
- For 1/90 to 5/93 Toyota 70 Series models, LJ70 LJ72 LJ73 LJ77 with Square Headlights
- Also suits 1994+ RJ70, RJ73, KZJ 70/71/73 with Square Headlights
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to match OE fitment specs
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement shocks for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Shocks are Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base kit includes front and rear coils and IMS shocks. Add other parts below
(9 reviews) -
Gladiator JT (2020-2024+)
Dobinsons C29-232V Front 3.0″ Lift Coils for Jeep Gladiator – Heavy Load – Pair
- Suits 2020+ Jeep Gladiator JT Pickup Truck. Lifts 3.0″ with 100-200LBS front end constant weight (bumper, winch, etc)
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Black
- Sold as a Pair
(5 reviews) -
Dobinsons
Dobinsons JL JT Adjustable Front Lower Arms Pair | JL Wrangler Gladiator JT
- Suits Jeep JL Wrangler 2018+ 2 door and 4door models and Jeep Gladiator JT 2020+
- Comes with highly flexible rubber bushings installed
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Oversized adjusters and rod thickness for maximum strength and durability with double-nut locking feature
- Zinc plated, then powder coated black, for the ultimate finish and protection
- More details and installation instructions are down below
(4 reviews) -
JL Wrangler (2018-2024+)FREE SHIPPING
within 48 US StatesDobinsons IMS29-60737 Rear 2.6″ IMS Shocks Pair | Jeep JL Wrangler
- Fits Jeep Wrangler JL 2018+ 2-door and 4-door
- Suits vehicles with 2-3.5″ of lift
- SOLD IN PAIRS
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- 732mm extended, 460mm compressed
(14 reviews) -
DobinsonsFREE SHIPPING
within 48 US StatesDobinsons IMS29-60736 Front 2.6″ IMS Shocks Pair | Jeep Gladiator & JL Wrangler
- Fits Jeep Gladiator JT 2020+ and Jeep Wrangler JL 2018+ 2-door and 4-door
- Suits vehicles with 2-3.5″ of lift
- SOLD IN PAIRS
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- 682mm extended, 425mm compressed
(13 reviews) -
Dobinsons
Dobinsons TB21-1550 Heavy Duty Torsion Bar Pair for Isuzu Amigo + Passport – 1145mm (45.08″)
- You MUST measure your stock torsion bar length before ordering here. Isuzu Amigo’s had a few variations worldwide on which torsion bars were used on each vehicle, so it’s required to measure yours first to ensure you order the correct size.
- TB21-1550 are 1145mm (45.08″), 30mm bar thickness
- Also may fit some Honda Passport models from 2/1999 to 2002, but be sure to measure your stock length first
- Increased spring rate to improve handling and lift front end
- Powder coated black for a long lasting finish
- Replaces OE torsion bars without modification
- Torsion bars must be installed with 2/3 suspension down travel and 1/3 up travel to ensure a good ride
(4 reviews) -
Dobinsons
Dobinsons TB21-1547 Heavy Duty Torsion Bar Pair for Isuzu Amigo – 1000mm (39.37″)
- You MUST measure your stock torsion bar length before ordering here. Isuzu Amigo’s had a few variations worldwide on which torsion bars were used on each vehicle, so it’s required to measure yours first to ensure you order the correct size.
- TB21-1547 are 1000mm (39.37″), 26mm bar thickness
- Increased spring rate to improve handling and lift front end
- Powder coated black for a long lasting finish
- Replaces OE torsion bars without modification
- Torsion bars must be installed with 2/3 suspension down travel and 1/3 up travel to ensure a good ride
(2 reviews) -
Pathfinder R51 (2005-2012)
Dobinsons GS45-643 Rear Shocks Pair | Nissan Pathfinder R51 2005-2012
- Suits Nissan Pathfinder R51 from 2005 to 2012 models
- Suitable for stock height up to 2.0″ of lift
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Sold in Pairs
(8 reviews) -
WK2 Grand Cherokee (2011-2022)FREE SHIPPING
within 48 US StatesDobinsons IMS29-50732 Front IMS Struts Pair | Jeep Grand Cherokee WK2 2011-2015
- Fits Jeep Grand Cherokee WK2 from 2011 to 2015 – will not fit 2016+ as they use a different lower mount
- Does not suit Quadralift vehicles (air ride suspension)
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
- ****Coil seat should be set at 540mm(21.25″) from the strut bushing eye. Please check our instructions section or reach out if you have any questions. If done incorrectly you can damage the shocks, springs and vehicle.*****
- Struts only, sold as a pair – the coils are sold separately
(15 reviews) -
Explorer U502 AWD 2012+
Dobinsons C19-439 2″ Lift Rear Coils for Ford Explorer U502 2012-21 AWD 3.5L 3.7L – Pair
- 2″ rear lift coils for a Ford Explorer AWD 3.5L and 3.7L from 2012-2021
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold as a Pair
(4 reviews) -
Explorer U502 AWD 2012+
Dobinsons C19-438 2″ Lift Front coils for Ford Explorer U502 2012-21 AWD 3.5L 3.7L – Pair
- 2″ front lift coils for a Ford Explorer AWD 3.5L and 3.7L from 2012-2021
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold as a Pair
(5 reviews) -
200 Series Land Cruiser (2008-2021)
Dobinsons C59-549 2″ UHD Land Cruiser 200 Series Rear Coils – Pair
- C59-549 – 2″ lift with 1100LBS+ constant rear weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 510/485mm free height, 297LBF/IN Spring Rate
- Sold as a Pair – marked side specific for installation
(6 reviews)$305.00 Select options This product has multiple variants. The options may be chosen on the product page -
Coil Springs
Dobinsons C45-422 Front 30mm lift Coil Springs for Nissan Pathfinder 4×4 R52 – Pair
- C45-422 Front coils will lift 30mm over original height with the added weight of 110-180LBS of constant weight, such as a bumper or winch
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- Photo is not of actual coil springs for this vehicle
(5 reviews) -
Dobinsons
Dobinsons GS29-726 Pair of Front Struts for Jeep Grand Cherokee WK and Commander
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS29-726 Specifications: 517mm extended, 358mm compressed
(8 reviews) -
55 Series (1970-80)
Dobinsons 1.75″ Suspension Kit for Toyota Land Cruiser FJ55 1970-1980
- Full 1.75″ suspension for Toyota Land Cruiser Wagon FJ55 models, from 1970 to 1980
- All parts are also available separately, HERE
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Hand made leaf springs, built in Queensland, Australia
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- Ships to the nearest freight terminal on a pallet for you to pick up, unless you add the home delivery fee below. We will be in touch with that delivery address
(3 reviews) -
Rear Bumpers
Dobinsons Lexus GX470 Rear Bumper with Tire and Jerry Can Carrier
- Suits Lexus GX470 from 2003 to 2009
- Black Powder Coat
- Stainless Steel Latch and Hardware
- Complete Kit with Everything Included
- Includes Jerry can carrier and single spare tire carrier
- All Lighting is 12V LED, requires splicing into original wiring harness (not plug and play)
- Does not include any hitch or towing ability. Designed to work around standard type tow hitch below rear cross member
- Adjustable offset tire carrier head, suitable up to a 35″ tire
- Instructions Page
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address
(4 reviews) -
Coil Springs
Dobinsons C45-420 Front 30mm lift Coil Springs for Nissan Pathfinder 4×4 R52 – Pair
- C45-420 Front coils will lift 30mm over original height with no added front weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Photo is not of actual coil springs for this vehicle
- Sold in Pairs
(16 reviews) -
KL Cherokee (2014-2022) (Trailhawk)
Dobinsons Front Lifted Coil Options for 4X4 Jeep Cherokee KL 2014 to 2022 – Pair
- Jeep Cherokee AD1 is Sport and Latitude models generally
- Jeep Cherokee AD2 is Trailhawk models generally
- Choose the appropriate coils to suit your model and added weight
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Can be used with Dobinsons heavy duty Twin-tube Nitrogas Struts
- Sold in pairs
(17 reviews) -
WK2 Grand Cherokee (2011-2022)
Dobinsons C29-127TB Rear Coil Springs Grand Cherokee WK2 2010-2022 1.75″ Lift Heavy Load – Pair
- Gives a 1.75″ lift with 330-440LBS constant weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Black
- Will Not Suit Vehicles Equipped with Quadra-Lift
- Sold in Pairs
(16 reviews) -
WK Grand Cherokee (2005-2010)
Dobinsons C21-054 Coil Springs | Jeep Commander 2006-10 and Grand Cherokee WK 2005-10 (Front 2″ Lift) – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(8 reviews) -
Front Bumpers
Dobinsons 100 Series Front Bumper | Land Cruiser 100 Series IFS 1998 to 2007
- Suits all year models of Toyota Land Cruiser 100 Series and Lexus LX470 1998-2007
- Airbag and winch compatible, Driving Light Mounts, Heavy Duty Black Powder Coat Finish
- 3mm Thick Main Body, 4mm + 5mm Thick Bracket, 1.6mm Bash Plates, 51mm top tubes
- Includes LED Turn Signals and all Required Hardware for Installation
- Separate Winch Cradle System, making installation faster. Removable Top Tubes
- Supplied Black, but can be painted by your paint shop. Suits 10000 – 12000 LB Low Mount Winches.
- Ships to the nearest freight terminal on a pallet for you to pick up, unless you add home delivery. We will be in touch with that delivery address
(3 reviews) -
Coil Springs
Dobinsons C23-195 Rear Coil Springs for Honda CRV 2012-2016 35mm 1.5″ Lift – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(10 reviews) -
Coil Springs
Dobinsons C23-072 Front Coil Springs for Honda CRV 1997-2001 30mm 1.25″ Lift – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(4 reviews) -
GX460 (2010-2023)FREE SHIPPING
within 48 US StatesDobinsons GX460 Snorkel Kit for Lexus GX460 2009-2023
- Lexus GX460 Snorkel Kit – Suits 2010-2023 Models
- Rotationally molded using precision CNC shaped aluminum dies
- Increases air intake height to allow safer water crossings and reduce dust intake
- Increased air intake height rams cooler, cleaner air into the engine increasing engine performance
- The higher the intake, the less dust is in the air
- Manufactured from high quality UV resistant LLDPE
- Snorkel Kits include template and all mounting hardware
- Installation Instructions
(7 reviews) -
Rear Bumpers
Dobinsons Rear Bumper for Toyota Land Cruiser 200 Series 2008-2021
- For Toyota Land Cruiser 200 Series from 2008 to 2021
- DOES NOT SUIT MODELS WITH LANE ASSIST
- Comes standard as Black Powder Coat (customer can have his local paint shop color-match as some photos show)
- Stainless Steel Latch and Hardware
- Complete Kit with Everything Included
- All Lighting is 12V LED, requires splicing into original wiring harness (not plug and play)
- Works with Factory Tow Hitch in OE position
- Adjustable offset tire carrier head, suitable up to a 35″ tire
- Instructions Page
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address
(3 reviews) -
Rear Bumpers
Dobinsons Toyota 70 Series Rear Bumper with Tire and Jerry Can Carrier
- Made for Long Wheel Base (LWB) 76 and 78 Series Land Cruiser Wagons pre-2007 – 5 Door Models
- Will not suit any Prado variant 70x series without modifications
- Comes standard as Black Powder Coat
- Stainless Steel Latch and Hardware
- Complete Kit with Everything Included
- All Lighting is 12V LED, requires splicing into original wiring harness (not plug and play)
- Works with Factory Tow Hitch in OE position
- Adjustable offset tire carrier head, suitable up to a 35″ tire
- ***Does not include Hi-Lift Jack carrier as shown in photos***
- Installation Page
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address
(5 reviews) -
LightingFREE SHIPPING
within 48 US StatesDobinsons 4×4 90 Watt 7″ Pair Round LED Driving Lights 14400 Lumens
- 90w (10 – 30v DC), 175mm (7″) Diameter Shallow Design
- 18 x 5w Cree LED Bulbs per light, Waterproof connectors
- 50,000+ Hours Life Span, 6500K Color Temperature
- IP68 Water and Dust Proof Rating
- Heavy Duty Steel Mounting Base with Locking Bolts for Increased Vibration Resistance
(10 reviews) -
LightingFREE SHIPPING
within 48 US StatesDobinsons 8.25″ Zenith 155 Watt LED Driving Light Pair with 12700 Raw Lumens
- 155w (9 – 32v DC), 210mm (8.25″) Diameter to fit most front aftermarket bumper designs
- 4 x 20 Watt 6000K Long Distance Center LED’s
- 15 x 5 Watt 6000K Spread Center LED’s
- 50,000+ Hours Life Span
- Highly resistant to vibration and corrosion
- IP68 Water and Dust Proof Rating
- 12,700 Raw Lumens Per Light, 25,400 Per Pair!!!
- Poly carbonate Smash Resistant Lens
- Heavy Duty Braced Steel Mount
- Wiring Harness sold separately (if needed)
(0 reviews)
