Your cart is currently empty!
Exceptions
Showing 61–90 of 1076 resultsSorted by popularity
-
SuspensionFREE SHIPPING
within 48 US StatesDobinsons IMS59-60710 2.6″ IFP Front Struts Pair | Toyota Tundra & Sequoia
- For 1.75-3.0″ of lift
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Features clip adjustment levels for fine tuning of lift height
- 4 Clip height settings. Lowest height is stock/OE height. Each clip height adds approximately 1/2″ of lift. Use clip heights to fine tune lift height or offset for vehicle lean
- Recommended to run with Dobinsons coils. OE coils may contact the thicker shock body
- TRD Pro models should start at the 2nd clip up to add 1/2″ of coil seat height, which equals the 1″ of lift the PRO’s come with when new
- ASSEMBLY INSTRUCTIONS
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- 615mm extended, 445mm compressed lengths
- Full 2 year limited warranty, no set rebuild time period
- If you are buying parts separately (coils and struts) and want them preassembled prior to shipping, add this product to your cart also
(13 reviews) -
GX470 (2002-2009)FREE SHIPPING
within 48 US StatesDobinsons 1″ to 3.5″ Lift Kit for Lexus GX470 (All Options)
- Full Dobinsons Complete Suspension kit for Lexus GX470 from 2003 to 2009, with every possible option listed on one page
- Lift from 1.0″ up to 3.5″ from the selections below
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base Kit Includes 2 Front Twin Tube Struts, 2 Rear Twin Tube Shocks, and 4 Standard Coil Springs
- Select the type of struts and shocks you want as well as all possible add-ons down below
- Choose from Dobinsons Classic Twin Tube shocks, IMS Monotube, or MRA 3-way adjustable remote resi shocks
- See note below in description about KDSS models
(15 reviews) -
4Runner 5th Gen (2010-2024)FREE SHIPPING
within 48 US StatesDobinsons GS59-574 Pair Extended Travel Struts FJ Cruiser 2010+ 4Runner 2010+ GX460
- Suits Toyota FJ Cruiser 2010+ and Toyota 4Runner 5th Gen 2010-2024, and Lexus GX460 (all years) for 2.0″ to 3.5″ of lift
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals
- Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS59-574 Specifications: Extended Travel – 575mm extended, 430mm compressed, 54mm body size
- Dobinsons GS59-574 struts add 1″ to the listed coil spring that are used with them, due to the raised coil seat. They are also longer than stock for taller lifts
- Example: Use a 2″ lift spring with these struts to get 3″ of lift
(6 reviews)$350.00 Select options This product has multiple variants. The options may be chosen on the product page -
4Runner 5th Gen (2010-2024)FREE SHIPPING
within 48 US StatesDobinsons MRA59-A700 3-Way Adjustable MRA Front Struts Pair
- Suits 2010-2024 4Runner, 2010+ FJ Cruiser, Lexus GX460, Toyota Prado 150, and 2015+ Toyota Hilux Revo, suitable for 0 – 2.5″ of lift
- The more you lift it, the less droop you will have left in the front end
- Height adjustable with a fully threaded body
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- MRA59-A700 – 560mm extended, 420mm compressed
- Includes Universal Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Does not include coil springs or top mounts – sold separately
- Instructions on setting coil seat height
- Resi installation instructions
(18 reviews) -
All Pro OffroadFREE SHIPPING
within 48 US StatesAll Pro Complete CV Boot Kit | Long Travel for 2005-23 Tacoma
- Complete CV boot replacement kit – Suits 2005-2023 Toyota Tacoma
- Includes inner OEM-Style CV boots and outer LONG TRAVEL CV boots and all related clamps
- Does not require long travel suspension to run this kit
- Qty 2 – OEM-Style Neoprene Long Travel Outer CV Boots
- Qty 2 – OEM-Style Neoprene Inner CV Boots
- Qty 4 – CV Grease Packets
- Qty 8 – Ear-Type CV-Joint Clamps
- Qty 2 – Axle C-Clips and Snap Rings
- Qty 1 – CV Clamp Crimp Pliers
(15 reviews) -
4Runner 3rd Gen (1996-2002)FREE SHIPPING
within 48 US StatesDobinsons GS59-222 Struts for 4Runner 96-02 Tacoma 98-04 Sequoia 01-07 Tundra 00-06
- Suits 3rd Gen 4Runner, 1st Gen Tacoma, 1st Gen Tundra, 1st Gen Sequoia, and Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- 465mm extended, 335mm compressed
- Sold in Pairs
(0 reviews) -
80 Series Land Cruiser (1990-1997)FREE SHIPPING
within 48 US StatesTimbren ABSTOFLC1A Active Off Road Toyota 80 Series Front Bump Stops
- Suits Land Cruiser 80 Series and Lexus LX450
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- 1″ Extended Bump Stop over stock
- Easy Installation
- Satisfaction Guarantee
- Lifetime Warranty
- Suits 1990 to 1997 Toyota Landcruiser 80 Series Front End
- NOTE: Some early model 80 Series didn’t come with the threaded holes in place in the frame. Adding nutserts may be required.
- Click here for instructions
(13 reviews) -
TimbrenFREE SHIPPING
within 48 US StatesTimbren ABSTRFK Tacoma U-Bolt flip and Active Bump Stops Kit | 2005-2023 Tacoma
- Suits 2005 to 2023 Toyota Tacoma 4×4 models
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Includes incorporated u-bolt flip kit for additional clearance below
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation
- Satisfaction Guarantee
- Lifetime Warranty
- Click here for instructions
(14 reviews) -
80 Series Land Cruiser (1990-1997)FREE SHIPPING
within 48 US StatesDobinsons SS59A824 Adjustable Monotube Steering Damper | Land Cruiser
- Suits Land Cruiser 60, 70 and 80 Series and Lexus LX450
- 56mm Extruded and CNC machined 6061-T6 hard anodized aluminum body
- Hard-anodized and clear coated for a durable finish.
- External reservoir design separates oil and high-pressure nitrogen gas
- Black-anodized, CNC machined 6061-T6 billet aluminum Components
- 5/8” hard chrome plated heat treated alloy steel Shaft
- 50mm high-flow 6061-T6 CNC machined Piston
- Natural rubber OEM style bushings
- Direct replacement for stock and after-market lifts kits
- 12 stage adjustment range
- Installation Instructions
(5 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons IMS45-60912 Front 2.6″ IFP Shocks Pair | Land Cruiser 80 Series (4-5″ lift)
- Suits Land Cruiser 80 Series and Lexus LX450
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
- 668mm extended, 402mm compressed
- Bump stop extensions and longer brake lines must be run with these longer shocks
(17 reviews) -
Brake LinesFREE SHIPPING
within 48 US StatesExtended Rear Brake Lines +4″ for Toyota Tacoma 2005-2023 (Red)
- American made D.O.T. Certified extruded teflon core, stainless steel braided and coated with a PVC cover
- 4″ longer than stock for long travel suspension lifts
- Suits the following vehicles: Toyota Tacoma 2005-2015, Toyota Tacoma 2016+
- Can be used with any lift height, however these are extra long for long travel rear shocks
- Sold as a pair with new retaining clips
(9 reviews) -
GX460 (2010-2023)FREE SHIPPING
within 48 US StatesDobinsons 1.5-3.5″ IMS Lift Kit | Lexus GX460 2010-2023
- Every IMS suspension option from Dobinsons to lift your Lexus GX460 all on one page
- Here you can lift from a low height up to the maximum bolt-on lift height by making your selections below
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base Kit Includes 2 Front IMS Struts, 2 Rear IMS Shocks, and 4 Coil Springs
(21 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons IMS59-60786 Front Ext Travel 2.6″ IFP Shocks Pair | Land Cruiser 100 Series (2-2.5″ lift)
- Suits Toyota Land Cruiser 100 Series and Lexus LX470 Front End
- Requires full diff drop kit and UCA’s before installation
- Front shocks only. To order full kit, click here
- SOLD IN PAIRS
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
- 470mm extended and 315mm compressed
(17 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons IMS59-60687 Rear 2.6″ IFP Shocks Pair | Land Cruiser 80 Series (4-5″ lift)
- Suits Land Cruiser 80 Series and Lexus LX450
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
- 680mm extended, 421mm compressed
- Bump stop extensions and longer brake lines must be run with these longer shocks
(18 reviews) -
FirestoneFREE SHIPPING
within 48 US StatesFirestone 4135 Coil-Rite Rear Helper Airbags for 0-1.5″ Lift | 4Runner FJ Cruiser GX470 GX460
- Suits all 3rd/4th/5th Gen 4Runners, FJ Cruiser, GX470, GX460 for 0-1.5″ of lift
- Also Suits Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- Complete kit – 1 per vehicle
- Inserts inside your rear coil springs to add additional load support
- Manually inflate or deflate the air bags to add or remove support or height
- Perfect for people who tow, or regularly load up fully and need additional height or support
- Route the airlines to your rear bumper or a suitable place to easily add or remove air to the bags
- Fitment Notes: NOTE: Custom modifications may be required for lifted applications to ensure air bags are properly supported. If using on a lifted application, do not follow Firestone bump stop/jounce cut instructions. You will need to determine where to cut based on your lift amount (not cutting off as much depending on lift height)
- Installation Manual, Click Here
- We also sell a Firestone air compressor and gauge kit to fill this up from inside the vehicle
(5 reviews) -
Bump Stops + SpacersFREE SHIPPING
within 48 US StatesDobinsons BS59-560 Front Adjustable Bump Stop Pair
- Adjustable front soft hit bump stop made from high quality rubber
- Suits 0-30mm Extension
- The BS59-560 rubber only is 1-3/8″ (35mm) thick, and the included spacers are 5, 10, 20mm
- Sold as a pair, replacing two front bump stops
- Ideal for those who bottom out often in their offroad driving
- Suits Tacoma, 4Runner, GX470, GX460, GX550, 200 Series & more (see below for full vehicle list)
- Installation Instructions
(10 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons IMS59-60713 2.6″ IFP Rear Shocks Pair | Toyota Sequoia 2008-2022
- Suits 2008-2022 Toyota Sequoia without rear air suspension, for lift heights between 0″ and 2.5″
- SOLD IN PAIRS
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
- 343mm compressed length, 489mm extended length (these are extended travel over the GS59-713 shocks)
- Note: the video shows an IMS front strut that takes a coil. This listing is for the rear IMS shock, no adjustability.
(14 reviews) -
80 Series Land Cruiser (1990-1997)FREE SHIPPING
within 48 US StatesTimbren ABSTORLC1 Active Off Road Toyota 80 Series Rear Bump Stops
- Suits Land Cruiser 80 Series and Lexus LX450
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation
- Satisfaction Guarantee
- Lifetime Warranty
- Suits 1990 to 1997 Toyota Landcruiser 80 Series Rear End
- Overall kit height = 8.25”
- Total deflected (compressed) height = 6”
- Amount of deflection (compression) = 2.25”
- NOTE: Bolts into the frame. Adding nutserts may be required depending on frame condition
- Oversized coils and wide tires without much offset could possibly contact the bump stops
- Clearancing of the bracket and the bump stop cup may be required on some long travel setups to avoid clearance issues with the coil springs
- Click here for instructions
(11 reviews) -
DobinsonsFREE SHIPPING
within 48 US StatesDobinsons IMS59-50649 2.2″ IFP Rear Shocks Pair
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- 614mm extended, 409mm compressed
- Should be run with a suspension lift of 1.75″ or more
(15 reviews) -
All Pro OffroadFREE SHIPPING
within 48 US StatesAll Pro Complete CV Boot Kit | Toyota Tundra Sequoia 2000-2006
- Complete CV boot replacement kit – Suits 2000-2006 Toyota Tundra and Sequoia
- Includes inner and outer OEM-Style CV boots and all related clamps.
- Qty 2 – OEM-Style Neoprene Outer CV Boots
- Qty 2 – OEM-Style Neoprene Inner CV Boots
- Qty 4 – CV Grease Packets
- Qty 8 – Ear-Type CV-Joint Clamps
- Qty 2 – Axle C-Clips and Snap Rings
- Qty 1 – CV Clamp Crimp Pliers
(17 reviews) -
Tire and WheelFREE SHIPPING
within 48 US StatesDigital Tire Deflator + Digital Tire Gauge + and 53pc Tire Repair Kit Combo Kit
- Our Recovery Gear and Air management Systems are some of the best in the business! Now you get the best of both worlds with our Combo Kits!
- Tire Repair Kit
- Digital Tire Gauge
- Digital Tire Deflator
(3 reviews) -
Sequoia 2nd Gen (2008-2022)FREE SHIPPING
within 48 US StatesDobinsons Sequoia Lift Kit 1.75″-2.5″ for 2008-2022 5.7L V8 (All Options)
- Suits 2008-2022 Toyota Sequoia 4×4 V8 models
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Includes 2 Front Struts, 2 Rear Shocks, and 4 Coil Springs
- Select from Twin Tube or IMS Monotube struts and shocks (more details below in description)
- Does not suit rear air suspension equipped models
- 2.5″ rear lift height requires shock extensions with twin tube shocks for proper travel, add it in the drop-downs below
- Front IMS struts assembly instructions
(9 reviews) -
Control Arms - 80 SeriesFREE SHIPPING
within 48 US StatesDobinsons 80 Series Upper and Lower Rear Trailing Arms bundle
- Suits all 80 Series Land Cruisers and Lexus LX450 from 1990 to 1997
- Bundle of both the upper and lower rear adjustable control arms
- Comes with high quality rubber OE style bushings installed for maximum flexibility, and zero noise
- Made from HSLA (High Strength Low Alloy) Steel, 40mm OD and 6mm wall thickness with support brace
- Oversized adjusters and rod thickness for maximum strength and durability with double-nut locking feature
- Zinc plated, then E-coated black, for the ultimate finish and protection
(0 reviews) -
SPCFREE SHIPPING
within 48 US StatesSPC 25470 | UCA’s for Tacoma 2005-2023 Pair
- Suits Toyota Tacoma 2005-2023 4×4 and Prerunner
- Improved clearance to get around the spring bucket
- 80° of articulation in its ball joint
- SPC’s arm gives you maximum droop travel.
- SPC’s arms have +2° of caster built into them
- Arm will get you 0° to +4° of caster and ±2° of camber
- Maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming
- Now with updated maintenance-free sealed ball joints
- Installation Instructions
- We offer replacement ball joints as well
(10 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons GS59-649 Rear Twin Tube Shocks Pair – Comfort Option
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- GS59-649 is a comfort version (softer) of the GS59-651
- See full vehicle list below for fitment
- 591mm extended, 363mm compressed, 51mm body diameter
(9 reviews) -
FirestoneFREE SHIPPING
within 48 US StatesFirestone 4108 Coil-Rite Rear Helper Airbags for 2-3″ Lift | 4Runner FJ Cruiser GX470 GX460
- Suits all 3rd/4th/5th Gen 4Runners, FJ Cruiser, GX470, GX460 WITH 2-3″ of Lift
- Also Suits Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- Substitute Option – Air Lift 60769
- These are longer than the Firestone 4135 for lifted vehicles
- Complete kit – 1 per vehicle
- Inserts inside your rear coil springs to add additional load support
- Manually inflate or deflate the air bags to add or remove support or height
- Perfect for people who tow, or regularly load up fully and need additional height or support
- Route the airlines to your rear bumper or a suitable place to easily add or remove air to the bags
- Fitment Notes: NOTE: Custom modifications may be required for lifted applications to ensure air bags are properly supported. If using on a lifted application, do not follow Firestone bump stop/jounce cut instructions. You will need to determine where to cut based on your lift amount (not cutting off as much depending on lift height)
- Installation Manual, Click Here
- We also sell a Firestone air compressor and gauge kit to fill this up from inside the vehicle
(5 reviews) -
80 Series Land Cruiser (1990-1997)FREE SHIPPING
within 48 US StatesDobinsons GS59-687 4-5″ Rear Shocks Pair for 80 Series Land Cruiser
- Sold as a Pair, suits lifts of 4-5″ or for Long Travel setups – 1990-1997 Toyota Landcruiser 80 Series and Lexus LX450
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS59-687 Specifications: 680mm extended, 407mm compressed, 60mm body size
- Bump stop extensions and longer brake lines must be run with these longer shocks
- Sold in Pairs
(6 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons GS59-711 Pair of Rear Shocks for Toyota Tundra 2007-2021
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals
- Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings
- Double Chrome hardened rods
- Metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS59-711 Specifications are 622mm extended, 380mm compressed, 54mm body size
(6 reviews) -
80 Series Land Cruiser (1990-1997)FREE SHIPPING
within 48 US StatesDobinsons GS45-912 4-5″ Front Shocks Pair for 80 Series Land Cruiser
- Suits: Toyota Land Cruiser 80 series and Lexus LX450 1990-1997 for 4-5″ of Lift
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals
- Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS45-912 specifications: 670mm extended, 390mm compressed, 60mm body size
- Bump stop extensions and longer brake lines must be run with these longer shocks
- Sold in Pairs
(6 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons IMS59-60446 2.6″ IFP Front Struts Pair | Tundra 2022+ and Sequoia 2023+
- Front IMS struts to suit Toyota Tundra 2022-2025+ and Sequoia 2023-2025+
- Can be used with OEM coils or Dobinsons lifted coils
- Suits 0-3″ of lift
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore
- 22mm / 7/8″ shaft diameter on front struts
- Full 2 year limited warranty, no set rebuild time period
- IMS59-60446 specs – 540mm extended, 390mm compressed
- SOLD IN PAIRS
- Coil seat for IMS59-60446 should be set at 175mm (6.87″) from the strut bushing eye
- Photo for illustration purposes
(15 reviews)
