Archives

on
  • Complete Dobinsons Suspension Kit for a Ford Bronco 2-Door or 4-Door Models 2021-2024+
  • Will not suit Bronco Sport
  • Choose all the parts down below to match your vehicle and needs, and also see the recommended parts to add on for a fuller kit
  • 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
  • Coils are teal or black. Struts are black
  • All are assembled at the standard coil seat height, you adjust the height on the vehicle to the height you’d like
  • The Dobinsons MRA Coilovers will come pre-assembled with new struts, coils and top mounts and hardware
  • Fully rebuildable and re-valvable
  • FRONT AND REAR COILOVERS ARE PRE-ASSEMBLED AND READY TO BOLT IN
  • 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
  • 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
  • 20 Stage Low Speed Compression – For creepy crawling and cornering
  • 15 Stage Rebound – Control your coils, prevent bucking
  • 60mm CNC Machined High Flow Billet Aluminum Race Piston
  • 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
  • Upgraded 3 Stage FKM‐HNBR Sealing System
  • TSUGAMI™ CNC machined components for precise tolerances
  • Parker™ Braided High Pressure Hoses
  • 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
  • T6 6061 Height Adjustable Spring Seat
  • Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
  • 60mm Full 6063 aluminum remote reservoir
  • Lightweight CNC Machined Low Friction floating piston
  • High Quality O.E.M. Grade Natural Rubber Bushings
  • Single Piece Lower Leg
  • EDP Surface Protection
  • CNC TIG Precision Welded Body End Mounts
  • Fully Rebuildable Design
  • Includes Reservoir Brackets and Hardware, and Adjuster Wrench
  • Full 2 year limited warranty, no set rebuild time period
  • Includes front lower mount spacer for proper clearance to CV axle – must be installed!!
  • Uses Dobinsons MRA19-A104 and MRA19-A105 struts with Dobinsons coils
  • Front MRA19-A104 specs: 60mm piston, 22mm diameter rod, 609mm extended, 449mm compressed, 160mm stroke
  • Rear MRA19-A105 specs: 60mm piston, 22mm diameter rod, 679mm extended, 449mm compressed, 230mm stroke
  • Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle. 
  • New UCA’s are required for proper coilover and hose clearance, see all options
  • Dobinsons Ford Bronco Sway Bar Relocation Bracket Kit should be added for coilover clearance

on
  • Suits the Rear of a Ford Bronco 2-Door or 4-Door Models 2021-2024+
  • Will not suit Bronco Sport
  • 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
  • Looking for a quick and easy way to lift your Bronco?  This is your answer
  • Coils are teal or black. Struts are black
  • All are assembled at the standard coil seat height, you adjust the height on the vehicle to the height you’d like
  • The Dobinsons MRA Coilovers will come pre-assembled with new struts, coils and top mounts and hardware
  • Fully rebuildable and re-valvable
  • SOLD IN PAIRS – READY TO BOLT IN
  • 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
  • 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
  • 20 Stage Low Speed Compression – For creepy crawling and cornering
  • 15 Stage Rebound – Control your coils, prevent bucking
  • 60mm CNC Machined High Flow Billet Aluminum Race Piston
  • 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
  • Upgraded 3 Stage FKM‐HNBR Sealing System
  • TSUGAMI™ CNC machined components for precise tolerances
  • Parker™ Braided High Pressure Hoses
  • 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
  • T6 6061 Height Adjustable Spring Seat
  • Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
  • 60mm Full 6063 aluminum remote reservoir
  • Lightweight CNC Machined Low Friction floating piston
  • High Quality O.E.M. Grade Natural Rubber Bushings
  • Single Piece Lower Leg
  • EDP Surface Protection
  • CNC TIG Precision Welded Body End Mounts
  • Fully Rebuildable Design
  • Includes Reservoir Brackets and Hardware, and Adjuster Wrench
  • Full 2 year limited warranty, no set rebuild time period
  • Uses Dobinsons MRA19-A105 struts with Dobinsons C19-571V 2-Door coils Dobinsons C19-573V 4-Door coils
  • Rear MRA19-A105 specs: 60mm piston, 22mm diameter rod, 679mm extended, 449mm compressed, 230mm stroke
  • Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle. 
  • Please NOTE: Assembled coilovers cannot be returned, as they are made to order

on
  • Suits the Front of a Ford Bronco 2-Door or 4-Door Models 2021-2024+
  • Will not suit Bronco Sport
  • 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
  • Looking for a quick and easy way to lift your Bronco?  This is your answer
  • Coils are teal or black. Struts are black
  • All are assembled at the standard coil seat height, you adjust the height on the vehicle to the height you’d like
  • The Dobinsons MRA Coilovers will come pre-assembled with new struts, coils and top mounts and hardware
  • Fully rebuildable and re-valvable
  • SOLD IN PAIRS – READY TO BOLT IN
  • 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
  • 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
  • 20 Stage Low Speed Compression – For creepy crawling and cornering
  • 15 Stage Rebound – Control your coils, prevent bucking
  • 60mm CNC Machined High Flow Billet Aluminum Race Piston
  • 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
  • Upgraded 3 Stage FKM‐HNBR Sealing System
  • TSUGAMI™ CNC machined components for precise tolerances
  • Parker™ Braided High Pressure Hoses
  • 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
  • T6 6061 Height Adjustable Spring Seat
  • Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
  • 60mm Full 6063 aluminum remote reservoir
  • Lightweight CNC Machined Low Friction floating piston
  • High Quality O.E.M. Grade Natural Rubber Bushings
  • Single Piece Lower Leg
  • EDP Surface Protection
  • CNC TIG Precision Welded Body End Mounts
  • Fully Rebuildable Design
  • Includes Reservoir Brackets and Hardware, and Adjuster Wrench
  • Full 2 year limited warranty, no set rebuild time period
  • Includes lower spacer for proper clearance to CV axle – must be installed!!
  • Uses Dobinsons MRA19-A104 struts with Dobinsons C19-568 2-Door coils Dobinsons C19-570 4-Door coils
  • Front MRA19-A104 specs: 60mm piston, 22mm diameter rod, 609mm extended, 449mm compressed, 160mm stroke
  • Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle. 
  • New UCA’s are required for proper coilover and hose clearance, see all options
  • Dobinsons Ford Bronco Sway Bar Relocation Bracket Kit should be added for coilover clearance
  • Please NOTE: Assembled coilovers cannot be returned, as they are made to order