Archives

on

2023 Toyota Tundra 4×4 with 2.5″ front lift and 1.0″ rear lift, IMS struts and shocks

2022 Tundra with Dobinsons 2″ front and 1″ rear IMS lift installed credit WrapCo

2022 Tundra with Dobinsons IMS lift installed credit WrapCo front coilovers
2022 Tundra with Dobinsons IMS lift installed credit WrapCo front coilovers

RCI 18 inch HD Bed Rack truck rack on a 2022 Toyota Tundra

RCI 18 inch HD Bed Rack truck rack on a Toyota Tundra
RCI 18 inch HD Bed Rack truck rack on a Toyota Tundra

Expedition Truck Cap with Full Wing Doors Tundra 2022-2024 5.5FT Bed

Expedition Truck Cap with Full Wing Doors | Tundra 2022-2024 5.5FT Bed

on
  • For Nissan Xterra N50
  • Converts L45-8185-R to L45-8192-R
  • Adds 200KG (440LB) constant load rating to existing springs
  • Made from the highest quality raw materials to give years of life under the harshest conditions
  • Over 60 years of leaf spring design and manufacturing
  • Design features include Drawn, tapered and thinned leaf ends
  • Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
  • Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
  • Includes 2 x add-a-leafs and 2 x longer center pins

on
  • Dobinsons MRA 2.6″ Body Universal Smoothie Shock – offered in 10″, 12″ and 14″ Travel lengths
  • MRA92-A2524 – 14″ Travel Shock
  • Extended Length: 38.49″ / 980mm
  • Compressed Length: 24.0″ / 611mm
  • Reservoir Length: 12″ / 300mm
  • Hose Length: 19.6″ / 500mm
  • Rod Diameter: 22mm / 7/8″
  • MRA means Monotube Remote (reservoir) Adjustable
  • 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
  • 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
  • 20 Stage Low Speed Compression – For creepy crawling and cornering
  • 15 Stage Rebound – Control your coils, prevent bucking
  • 5140 HV900 Hard Chrome Plated, Heat Treated 22mm micro-polished high strength shock shaft.
  • Shaft minimum tensile strength exceeding 700MPA / 100 PSI and hardness exceeding 46HRC
  • 2.6″ Shock Body precision honed to +/- 0.04mm
  • Zinc plated DOM 3mm steel shock body for ultimate corrosion protection
  • Parker Steel braided, rubber coated high pressure hoses
  • Lightweight CNC machined low friction floating piston
  • 3 Stage FMJ+HNBR long life, low friction sealing system
  • PTFE lined high quality spherical bearings
  • Fully rebuildable and tunable
  • Dual rate design with high quality slider & cross-over rings
  • 64mm Finned Reservoir
  • 350V.I. High performance damper fluid
  • T6061 CNC machined ultra high flow race piston
  • Includes universal reservoir isolators and hose clamps
  • Replacement shims and misalignment spacers are included
  • SINGLE SHOCK INCLUDED (Add two to cart for pair)
  • WARNING PLEASE READ this notice about misalignment spacers
  • Fully detailed guide and owners manual – MUST READ before ordering to understand setting up the shocks
  • Limited Warranty details down below

on
  • Dobinsons MRA 2.6″ Body Universal Smoothie Shock – offered in 10″, 12″ and 14″ Travel lengths
  • MRA92-A2522 – 12″ Travel Shock
  • Extended Length: 33.42″ / 851mm
  • Compressed Length: 21.48″ / 547mm
  • Reservoir Length: 12″ / 300mm
  • Hose Length: 19.6″ / 500mm
  • Rod Diameter: 22mm / 7/8″
  • MRA means Monotube Remote (reservoir) Adjustable
  • 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
  • 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
  • 20 Stage Low Speed Compression – For creepy crawling and cornering
  • 15 Stage Rebound – Control your coils, prevent bucking
  • 5140 HV900 Hard Chrome Plated, Heat Treated 22mm micro-polished high strength shock shaft.
  • Shaft minimum tensile strength exceeding 700MPA / 100 PSI and hardness exceeding 46HRC
  • 2.6″ Shock Body precision honed to +/- 0.04mm
  • Zinc plated DOM 3mm steel shock body for ultimate corrosion protection
  • Parker Steel braided, rubber coated high pressure hoses
  • Lightweight CNC machined low friction floating piston
  • 3 Stage FMJ+HNBR long life, low friction sealing system
  • PTFE lined high quality spherical bearings
  • Fully rebuildable and tunable
  • Dual rate design with high quality slider & cross-over rings
  • 64mm Finned Reservoir
  • 350V.I. High performance damper fluid
  • T6061 CNC machined ultra high flow race piston
  • Includes universal reservoir isolators and hose clamps
  • Replacement shims and misalignment spacers are included
  • SINGLE SHOCK INCLUDED (Add two to cart for pair)
  • WARNING PLEASE READ this notice about misalignment spacers
  • Fully detailed guide and owners manual – MUST READ before ordering to understand setting up the shocks
  • Limited Warranty details down below