Archives

on
  • Extended Travel Coilovers Suit Nissan Xterra 4×4 Models (2005-2015) – lifts 2.5″
  • These extended travel struts REQUIRE aftermarket UCA’s for full travel, like Dobinsons
  • Looking for a quick and easy way to lift your Xterra?  This is your answer
  • Dobinsons MRA are height adjustable by a fully threaded body
  • The Dobinsons MRA Coilovers will come pre-assembled with new struts, coils and top mounts
  • 3-way adjustable valving – adjust high and low speed compression and rebound
  • Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
  • 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
  • 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
  • 20 Stage Low Speed Compression – For creepy crawling and cornering
  • 15 Stage Rebound – Control your coils, prevent bucking
  • 50mm CNC Machined High Flow Billet Aluminum Race Piston
  • 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
  • Upgraded 3 Stage FKM‐HNBR Sealing System
  • TSUGAMI™ CNC machined components for precise tolerances
  • Parker™ Braided High Pressure Hoses
  • 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
  • T6 6061 Height Adjustable Spring Seat
  • Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
  • 60mm Full 6063 aluminum remote reservoir
  • Lightweight CNC Machined Low Friction floating piston
  • High Quality O.E.M. Grade Natural Rubber Bushings
  • Single Piece Lower Leg
  • EDP Surface Protection
  • Direct Bolt-On Design
  • CNC TIG Precision Welded Body End Mounts
  • Fully Rebuildable Design
  • SOLD IN PAIRS
  • Includes Reservoir Bracket and Hardware, and Adjuster Wrench
  • Full 2 year limited warranty, no set rebuild time period
  • Length specs – 278mm compressed and 410mm extended
  • Photos for illustration purposes
  • FITTING INSTRUCTIONS
  • Instructions for setting coil seat height
  • Link to the matching rear shocks
  • Please NOTE: Assembled coilovers cannot be returned, as they are made to order

on
  • Extended Travel Coilovers Suit Nissan Frontier D41 4×4 Models 2022-2025+ – lifts 2-3″ depending on selections made below
  • These extended travel struts REQUIRE aftermarket UCA’s for full travel, like Dobinsons
  • Looking for a quick and easy way to lift your Frontier?  This is your answer
  • Dobinsons MRA are height adjustable by a fully threaded body
  • The Dobinsons MRA Coilovers will come pre-assembled with new struts, coils and top mounts
  • 3-way adjustable valving – adjust high and low speed compression and rebound
  • Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
  • 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
  • 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
  • 20 Stage Low Speed Compression – For creepy crawling and cornering
  • 15 Stage Rebound – Control your coils, prevent bucking
  • 50mm CNC Machined High Flow Billet Aluminum Race Piston
  • 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
  • Upgraded 3 Stage FKM‐HNBR Sealing System
  • TSUGAMI™ CNC machined components for precise tolerances
  • Parker™ Braided High Pressure Hoses
  • 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
  • T6 6061 Height Adjustable Spring Seat
  • Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
  • 60mm Full 6063 aluminum remote reservoir
  • Lightweight CNC Machined Low Friction floating piston
  • High Quality O.E.M. Grade Natural Rubber Bushings
  • Single Piece Lower Leg
  • EDP Surface Protection
  • Direct Bolt-On Design
  • CNC TIG Precision Welded Body End Mounts
  • Fully Rebuildable Design
  • SOLD IN PAIRS
  • Includes Reservoir Bracket and Hardware, and Adjuster Wrench
  • Full 2 year limited warranty, no set rebuild time period
  • Length specs – 278mm compressed and 410mm extended
  • Photos for illustration purposes
  • FITTING INSTRUCTIONS
  • Instructions for setting coil seat height
  • Link to the matching rear shocks
  • Please NOTE: Assembled coilovers cannot be returned, as they are made to order

on
  • 4×4 Access Cab models come with 1″ front lift from the factory.  Lift heights listed are for Dual cab 4×4 models.  Subtract 1″ for access cab models
  • Long bed models require the next step up in leaf spring, or they will sit 1″ less high
  • Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
  • Select from one of 3 rear leaf spring packs from All Pro Offroad, add up the total constant weight in the back of your Tacoma to make the right choice
  • Choose from Teal, Black or Red Coil Springs
  • Dobinsons Coils are specifically suited to the additional accessory load (weight) on the vehicle
  • High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
  • Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel – Choose from IMS or MRA
  • IMS Shock Details
    • Direct, bolt-on replacement for easy fitment
    • IFP – Internal Floating Piston, separates oil and nitrogen
    • Corrosion resistant (EDP Surface Protection)
    • Heavy duty single piece lower leg
    • Enormous oil capacity
    • Fully Rebuildable Design – no set rebuild period or limits
    • Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
    • Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
    • 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
  • MRA Shock Details
    • 3-way adjustable valving – adjust high and low speed compression and rebound
    • Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
    • Extended Travel – 567mm extended, 417mm compressed
    • 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
    • 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
    • 20 Stage Low Speed Compression – For creepy crawling and cornering
    • 15 Stage Rebound – Control your coils, prevent bucking
    • 50mm CNC Machined High Flow Billet Aluminum Race Piston
    • 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
    • Upgraded 3 Stage FKM‐HNBR Sealing System
    • TSUGAMI™ CNC machined components for precise tolerances
    • Parker™ Braided High Pressure Hoses
    • 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
    • T6 6061 Height Adjustable Spring Seat
    • Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
    • 60mm Full 6063 aluminum remote reservoir
    • Lightweight CNC Machined Low Friction floating piston
    • High Quality O.E.M. Grade Natural Rubber Bushings
    • Single Piece Lower Leg
    • EDP Surface Protection
    • Direct Bolt-On Design
    • CNC TIG Precision Welded Body End Mounts
    • Fully Rebuildable Design – no set rebuild period or limits
    • Includes Bolt-on Reservoir Brackets and Hardware and Adjuster Wrench
  • Choose your desired suspension parts to build the kit best suited to your weight and desired lift height
  • You choose what parts you want to buy.  If you don’t add it to your cart, it’s not included
  • Common installation instructions related to parts on this page
  • Photos show specific parts that have been selected.  Nothing is included if you don’t add it to your cart

on
  • Suits Ford Ranger 2019-2023 models with any engine option, but will NOT suit the Raptor version
  • A Raptor-specific version is in the works for later in 2024
  • Designed and test fitted around a 4×4 model, but there shouldn’t be any issue with a 2WD since they share the same platform
  • This is a replacement tank that replaces your OE fuel tank, it holds 37 gallons instead of the stock 18 gallons and fills the same way an OE tank fills
  • Adds a massive 105% more fuel than stock!!
  • Go from an average 250 mile range to over 500 miles!!!  Great for people who live in remote areas, or like to go more than 4 hours before filling up
  • 37 gallon capacity, replaces the original 18 gallon tank
  • Tank fills using OEM gas door
  • No Exhaust modification required
  • Sits about 1.5″ lower than the OEM tank
  • Distance To Empty Feature can be recalibrated with the use of FORSCAN software, this will be a customer sourced option.
  • Fitting time – approximately 4-5 hours by a professional
  • Installation instructions
  • This item ships on a pallet to the nearest Truck Freight terminal for you to pickup.  We will be in touch with you regarding the nearest freight terminal, unless you add home delivery below
  • Part Number: FRDCPYR-US
  • This product can not be sold or shipped to residents in California due to SMOG rules.  Do not order this product if you live in California!!
  • MADE IN AUSTRALIA
  • Nearest Freight Terminal Finder – Use this to decide if you want home delivery or pickup at the nearest terminal