Your cart is currently empty!
Coilovers
Showing 31–59 of 59 results
-
Full Suspension Kits - Xterra
Dobinsons 1.5″ Lift IMS Coilovers for Nissan Xterra 05+
- Suits Nissan Xterra (2005-2015) 4×4 Models – Lifts 1.5″ over stock
- Looking for a quick and easy way to lift your Xterra? This is your answer
- Dobinsons IMS are height adjustable by a fully threaded body
- The Dobinsons IMS Coilovers will come pre-assembled with new struts, coils and top mounts
- Fully rebuildable and re-valvable
- SOLD IN PAIRS – READY TO BOLT IN
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Photos for illustration purposes
- Instructions for setting coil seat height
From $1,165.00 Select options -
BilsteinShips FREE !!
within 48 US StatesBilstein 47-310025 Front 6112 Series Kit
Original price was: $966.21.$826.00Current price is: $826.00. Add to cart -
Full Suspension Kits - FJC LateShips FREE !!
within 48 US StatesDobinsons 1.5-2.5″ Pre-Assembled MRA FJ Cruiser Coilovers for 2010-2014
- Suits Toyota FJ Cruiser 2010-2014
- Looking for a quick and easy way to lift your FJ Cruiser? This is your answer
- Select your desired lift height and spring rate – we’ll take care of the rest!!
- Dobinsons MRA are height adjustable by a fully threaded body
- MRA59-A700 – 560mm extended, 420mm compressed
- The Dobinsons MRA Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- Extended Travel – 567mm extended, 417mm compressed
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
- Resi installation instructions
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle. Adding 2.5″ or more lift, new UCA’s should be added for proper articulation and correct wheel alignment
- Link to Matching rear shocks
$1,795.00 Select options -
Full Suspension Kits - GX460Ships FREE !!
within 48 US StatesDobinsons 2-3.5″ Extended Travel Pre-Assembled MRA Coilovers for Lexus GX460
- Suits 2010-2023 Lexus GX460
- Looking for a quick and easy way to lift your GX460? This is your answer
- Select your desired lift height and spring rate – we’ll take care of the rest!!
- Dobinsons MRA are height adjustable by a fully threaded body
- The Dobinsons MRA Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- MRA59-A574 Travel – 575mm extended, 420mm compressed
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
- Resi installation instructions
- To run these Extended Travel coilovers, new UCA’s need to be added for proper articulation and correct wheel alignment. A diff drop kit is also recommended to minimize CV binding at full droop
- Link to Matching rear shocks
$1,795.00 Select options -
FoxShips FREE !!
within 48 US StatesFox 2.5 Factory Race Series Coilover IFP Shock Set – 883-02-025
- Suits 5th Gen Toyota 4Runner 2010-2024 0-3″ lift
- Suits 4th Gen Toyota 4Runner 2007-2009 0-3″ lift
- Suits Toyota FJ Cruiser 2006-2016 0-3″ lift
- Suits Toyota Tacoma 4×4 2005-2015 0-3″ lift
- Suits Toyota Tacoma 4×4 2016-2023 0-2″ lift
- Suits Lexus GX470 all years 0-3″ lift
- Suits Lexus GX460 all years 0-3″ lift
- Sold as a Pair, enough for 1 vehicle
- Preassembled with coil and strut mount – full assembly ready to bolt in
- Coilovers comes preset to the taller lift height right out of the box – may need to adjust depending on added weight or engine size
- Includes a 600LB spring rate coil
- Can not be used with any Dobinsons coils
- Front coilover shocks
- For up to 3 inch lift
- 2.5 inch smooth bore zinc plated seamless steel body
- Zinc-plated and double-clear coated body for long lasting finish
- Internal IFP mono-tube reservoir design separates shock oil from the high-pressure nitrogen
- Black-anodized, CNC-machined 6061-T6 billet aluminum components
- Application specific, adjustable 3.0 Eibach® racing springs
- 7/8″ hardened NitroSteel® Steel carbon shafts
- 6061-T6 hard-anodized, high flow aluminum piston
- Application specific valving to maximize performance
- Redundant sealing pack system main seal, wiper seal, scraper seal
- JM92 Advanced Suspension Fluid for improved performance at variable temperatures
- PTFE-lined, heat-treated, alloy steel spherical bearing
- Ride height preload ring adjustment
- Extended: 22.52 in.
- Collapsed: 17.58 in.
- Stroke: 4.93 in.
- Top mount: OEM
- Bottom mount: eyelet
- Sold in pairs
- Note: requires aftermarket upper control arms
- Installation Guide
- Link to buy Preload Wrench
- Link to buy Back Up Wrench (remove preload)
- Exploded View Diagram
- Warranty Information
$1,499.95 Add to cart -
Full Suspension Kits - Frontier D40
Dobinsons IMS Extended Travel Coilovers for Nissan Frontier D40 2005-2021
- Extended Travel Coilovers Suit Nissan Frontier D40 4×4 Models 2005 to 2021 – lifts 2-2.5″ depending on selections made below
- These extended travel struts REQUIRE aftermarket UCA’s for full travel, like Dobinsons
- Looking for a quick and easy way to lift your Frontier? This is your answer
- Dobinsons IMS are height adjustable by a fully threaded body
- The Dobinsons IMS Coilovers will come pre-assembled with new struts, coils and top mounts
- Fully rebuildable and re-valvable
- SOLD IN PAIRS – READY TO BOLT IN
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Length specs – 278mm compressed and 410mm extended
- Photos for illustration purposes
- Instructions for setting coil seat height
- Link to the matching rear shocks
From $1,165.00 Select options -
Bronco 2021-2024+Ships FREE !!
within 48 US StatesDobinsons 1.5-3.5″ Rear MRA Bronco Coilovers 2.6″ Body
- Suits the Rear of a Ford Bronco 2-Door or 4-Door Models 2021-2024+
- Will not suit Bronco Sport
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- Looking for a quick and easy way to lift your Bronco? This is your answer
- Coils are teal or black. Struts are black
- All are assembled at the standard coil seat height, you adjust the height on the vehicle to the height you’d like
- The Dobinsons MRA Coilovers will come pre-assembled with new struts, coils and top mounts and hardware
- Fully rebuildable and re-valvable
- SOLD IN PAIRS – READY TO BOLT IN
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Reservoir Brackets and Hardware, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Uses Dobinsons MRA19-A105 struts with Dobinsons C19-571V 2-Door coils Dobinsons C19-573V 4-Door coils
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle.
$2,185.00 Select options -
Bronco 2021-2024+Ships FREE !!
within 48 US StatesDobinsons 1.5-3.5″ Front MRA Bronco Coilovers 2.6″ Body
- Suits the Front of a Ford Bronco 2-Door or 4-Door Models 2021-2024+
- Will not suit Bronco Sport
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- Looking for a quick and easy way to lift your Bronco? This is your answer
- Coils are teal or black. Struts are black
- All are assembled at the standard coil seat height, you adjust the height on the vehicle to the height you’d like
- The Dobinsons MRA Coilovers will come pre-assembled with new struts, coils and top mounts and hardware
- Fully rebuildable and re-valvable
- SOLD IN PAIRS – READY TO BOLT IN
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Reservoir Brackets and Hardware, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Includes lower spacer for proper clearance to CV axle – must be installed!!
- Uses Dobinsons MRA19-A104 struts with Dobinsons C19-568 2-Door coils Dobinsons C19-570 4-Door coils
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle.
- New UCA’s are required for proper coilover and hose clearance, see all options
- Dobinsons Ford Bronco Sway Bar Relocation Bracket Kit should be added for coilover clearance
$2,185.00 Select options -
MRA Remote Resi 3-Way Adjustable MonotubeShips FREE !!
within 48 US StatesDobinsons MRA 2.6″ Universal Smoothie Shock – 14″ Travel Shock
- Dobinsons MRA 2.6″ Body Universal Smoothie Shock – offered in 10″, 12″ and 14″ Travel lengths
- MRA92-A2524 – 14″ Travel Shock
- Extended Length: 38.49″ / 980mm
- Compressed Length: 24.0″ / 611mm
- Reservoir Length: 12″ / 300mm
- Hose Length: 19.6″ / 500mm
- Rod Diameter: 22mm
- MRA means Monotube Remote (reservoir) Adjustable
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 5140 HV900 Hard Chrome Plated, Heat Treated 22mm micro-polished high strength shock shaft.
- Shaft minimum tensile strength exceeding 700MPA / 100 PSI and hardness exceeding 46HRC
- 2.6″ Shock Body precision honed to +/- 0.04mm
- Zinc plated DOM 3mm steel shock body for ultimate corrosion protection
- Parker Steel braided, rubber coated high pressure hoses
- Lightweight CNC machined low friction floating piston
- 3 Stage FMJ+HNBR long life, low friction sealing system
- PTFE lined high quality spherical bearings
- Fully rebuildable and tunable
- Dual rate design with high quality slider & cross-over rings
- 64mm Finned Reservoir
- 350V.I. High performance damper fluid
- T6061 CNC machined ultra high flow race piston
- Includes universal reservoir isolators and hose clamps
- Replacement shims and misalignment spacers are included
- SINGLE SHOCK INCLUDED (Add two to cart for pair)
- WARNING PLEASE READ this notice about misalignment spacers
- Fully detailed guide and owners manual – MUST READ before ordering to understand setting up the shocks
- Limited Warranty details down below
$675.00 Add to cart -
MRA Remote Resi 3-Way Adjustable MonotubeShips FREE !!
within 48 US StatesDobinsons MRA 2.6″ Universal Smoothie Shock – 12″ Travel Shock
- Dobinsons MRA 2.6″ Body Universal Smoothie Shock – offered in 10″, 12″ and 14″ Travel lengths
- MRA92-A2522 – 12″ Travel Shock
- Extended Length: 33.42″ / 851mm
- Compressed Length: 21.48″ / 547mm
- Reservoir Length: 12″ / 300mm
- Hose Length: 19.6″ / 500mm
- Rod Diameter: 22mm
- MRA means Monotube Remote (reservoir) Adjustable
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 5140 HV900 Hard Chrome Plated, Heat Treated 22mm micro-polished high strength shock shaft.
- Shaft minimum tensile strength exceeding 700MPA / 100 PSI and hardness exceeding 46HRC
- 2.6″ Shock Body precision honed to +/- 0.04mm
- Zinc plated DOM 3mm steel shock body for ultimate corrosion protection
- Parker Steel braided, rubber coated high pressure hoses
- Lightweight CNC machined low friction floating piston
- 3 Stage FMJ+HNBR long life, low friction sealing system
- PTFE lined high quality spherical bearings
- Fully rebuildable and tunable
- Dual rate design with high quality slider & cross-over rings
- 64mm Finned Reservoir
- 350V.I. High performance damper fluid
- T6061 CNC machined ultra high flow race piston
- Includes universal reservoir isolators and hose clamps
- Replacement shims and misalignment spacers are included
- SINGLE SHOCK INCLUDED (Add two to cart for pair)
- WARNING PLEASE READ this notice about misalignment spacers
- Fully detailed guide and owners manual – MUST READ before ordering to understand setting up the shocks
- Limited Warranty details down below
$650.00 Add to cart -
MRA Remote Resi 3-Way Adjustable MonotubeShips FREE !!
within 48 US StatesDobinsons MRA 2.6″ Universal Smoothie Shock – 10″ Travel Shock
- Dobinsons MRA 2.6″ Body Universal Smoothie Shock – offered in 10″, 12″ and 14″ Travel lengths
- MRA92-A2520 – 10″ Travel Shock
- Extended Length: 29.45″ / 750mm
- Compressed Length: 19.48″ / 496mm
- Reservoir Length: 10″ / 250mm
- Hose Length: 19.6″ / 500mm
- Rod Diameter: 22mm
- MRA means Monotube Remote (reservoir) Adjustable
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 5140 HV900 Hard Chrome Plated, Heat Treated 22mm micro-polished high strength shock shaft.
- Shaft minimum tensile strength exceeding 700MPA / 100 PSI and hardness exceeding 46HRC
- 2.6″ Shock Body precision honed to +/- 0.04mm
- Zinc plated DOM 3mm steel shock body for ultimate corrosion protection
- Parker Steel braided, rubber coated high pressure hoses
- Lightweight CNC machined low friction floating piston
- 3 Stage FMJ+HNBR long life, low friction sealing system
- PTFE lined high quality spherical bearings
- Fully rebuildable and tunable
- Dual rate design with high quality slider & cross-over rings
- 64mm Finned Reservoir
- 350V.I. High performance damper fluid
- T6061 CNC machined ultra high flow race piston
- Includes universal reservoir isolators and hose clamps
- Replacement shims and misalignment spacers are included
- SINGLE SHOCK INCLUDED (Add two to cart for pair)
- WARNING PLEASE READ this notice about misalignment spacers
- Fully detailed guide and owners manual – MUST READ before ordering to understand setting up the shocks
- Limited Warranty details down below
$625.00 Add to cart -
Shocks + Struts - Sequoia 3rd GenShips FREE !!
within 48 US StatesDobinsons 3.0-4.0″ Pre-Assembled MRA Coilovers for Toyota Sequoia 2023+
- Suits Toyota Sequoia 2023-2024+ Models
- TRD Pro Models yield 1″ less lift than listed here, as they are already lifted taller than base models
- Sold as a Pair, ready to bolt in
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- Looking for a quick and easy way to lift your Sequoia? This is your answer
- Select your desired lift height and tell us your weight – we’ll take care of the rest!!
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- SOLD IN PAIRS
- Full 2 year limited warranty, no set rebuild time period
- Must mount the banjo fitting and hose inwards on MRA struts
- Coil seat for MRA59-A446 will be set at 175mm (6.87″) from the strut bushing eye
- Photos for illustration purposes
- Instructions for setting and adjusting coil seat height
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle. Adding 2.5″ or more lift, new UCA’s should be added for proper articulation and correct wheel alignment
- If doing a 4″ lift in the front, a diff-drop kit or longer TRD CV-axles are REQUIRED, failure to complete these requirements could cause OE CV-axle failure
- TRD axle shafts: PT362-3432B and PT362-3431B
- Front Installation Instructions
- Link to Matching rear shocks
$1,960.00 Select options -
Shocks + Struts - Sequoia 3rd Gen
Dobinsons 3.0-4.0″ Pre-Assembled IMS Coilovers for Toyota Sequoia 2023+
- Suits Toyota Sequoia 2023-2024+ Models
- TRD Pro Models yield 1″ less lift than listed here, as they are already lifted taller than base models
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- Looking for a quick and easy way to lift your Sequoia? This is your answer
- Select your desired lift height and tell us your weight – we’ll take care of the rest!!
- Dobinsons IMS are height adjustable by a threaded body with adjustable collar
- The Dobinsons IMS Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
- Fully rebuildable and re-valvable
- SOLD IN PAIRS – READY TO BOLT IN
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- Full 2 year limited warranty, no set rebuild time period
- Photos for illustration purposes – Sequoia IMS coilovers use a slightly different top mount
- Instructions for setting and adjusting coil seat height
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle. Adding 2.5″ or more lift, new UCA’s should be added for proper articulation and correct wheel alignment
- If doing a 4″ lift in the front, a diff-drop kit or longer TRD CV-axles are REQUIRED, failure to complete these requirements could cause OE CV-axle failure
- TRD axle shafts: PT362-3432B and PT362-3431B
- Link to Matching rear shocks
$1,270.00 Select options -
Full Suspension Kits - XterraShips FREE !!
within 48 US StatesDobinsons 1.5″ Lift MRA Coilovers – Nissan Xterra 05+
- Remote Resi Coilovers Suit Nissan Xterra 4×4 Models (2005-2015) – lifts 1.5″
- Looking for a quick and easy way to lift your Xterra? This is your answer
- Dobinsons MRA are height adjustable by a fully threaded body
- The Dobinsons MRA Coilovers will come pre-assembled with new struts, coils and top mounts
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Reservoir Bracket and Hardware, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Length specs – 395mm extended, 266mm compressed
- Photos for illustration purposes
- FITTING INSTRUCTIONS
- Instructions for setting coil seat height
- Link to the matching rear shocks
From $1,795.00 Select options -
Full Suspension Kits - Frontier D41Ships FREE !!
within 48 US StatesDobinsons MRA Extended Travel Coilovers for Nissan Frontier D41 2022+
- Extended Travel Coilovers Suit Nissan Frontier D41 4×4 Models 2022-2023+ – lifts 2-3″ depending on selections made below
- These extended travel struts REQUIRE aftermarket UCA’s for full travel, like Dobinsons
- Looking for a quick and easy way to lift your Frontier? This is your answer
- Dobinsons MRA are height adjustable by a fully threaded body
- The Dobinsons MRA Coilovers will come pre-assembled with new struts, coils and top mounts
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Reservoir Bracket and Hardware, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Length specs – 278mm compressed and 410mm extended
- Photos for illustration purposes
- FITTING INSTRUCTIONS
- Instructions for setting coil seat height
- Link to the matching rear shocks
From $1,795.00 Select options -
FJ Cruiser Late (2010-2014)
Dobinsons 2-3.5″ Extended Travel Pre-Assembled IMS Coilovers for FJ Cruiser 2010+
- Suits 2010-2017 Toyota FJ Cruiser 4×4 Models
- Looking for a quick and easy way to lift your FJ Cruiser? This is your answer
- A 4×2 model lifts 1″ extra with the 4×4 lift heights
- Select your desired lift height and spring rate – we’ll take care of the rest!!
- Dobinsons IMS are height adjustable by a fully threaded body
- The Dobinsons IMS Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
- Fully rebuildable and re-valvable
- Extended Travel – 575mm fully extended, 430mm compressed
- SOLD IN PAIRS – READY TO BOLT IN
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Photos for illustration purposes
- Instructions for setting coil seat height
- To run these Extended Travel coilovers, new UCA’s need to be added for proper articulation and correct wheel alignment. A diff drop kit is also recommended to minimize CV binding at full droop
- Click to see Matching rear shocks
$1,165.00 Select options -
FJ Cruiser Late (2010-2014)
Dobinsons 1.5-2.5″ Pre-Assembled IMS Coilovers for FJ Cruiser 2010+
- Suits 2010-2017 Toyota FJ Cruiser 4×4 Models
- Looking for a quick and easy way to lift your FJ Cruiser? This is your answer
- A 4×2 model lifts 1″ extra with the 4×4 lift heights
- Select your desired lift height and spring rate – we’ll take care of the rest!!
- Dobinsons IMS are height adjustable by a fully threaded body
- The Dobinsons IMS Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
- Fully rebuildable and re-valvable
- 560mm extended, 420mm compressed
- SOLD IN PAIRS – READY TO BOLT IN
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Photos for illustration purposes
- Instructions for setting coil seat height
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle. Adding 2.5″ or more lift, new UCA’s should be added for proper articulation and correct wheel alignment
- Click to see Matching rear shocks
$1,165.00 Select options -
Pathfinder R51 (2005-2012)
Dobinsons 1.5″ Lift IMS Coilovers for Nissan Pathfinder R51
- Suits 2005-2012 Nissan Pathfinder R51 4×4 Models – Lifts 1.5″ over stock
- Looking for a quick and easy way to lift your Pathfinder? This is your answer
- Dobinsons IMS are height adjustable by a fully threaded body
- The Dobinsons IMS Coilovers will come pre-assembled with new struts, coils and top mounts
- Fully rebuildable and re-valvable
- SOLD IN PAIRS – READY TO BOLT IN
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Photos for illustration purposes
- Instructions for setting coil seat height
From $1,165.00 Select options -
Full Suspension Kits - Tacoma 1st GenShips FREE !!
within 48 US StatesBilstein 47-310896 Front 6112 Series Kit | 1st Gen Tacoma
Original price was: $966.21.$826.00Current price is: $826.00. Add to cart -
BilsteinShips FREE !!
within 48 US StatesBilstein 47-310049 Front 6112 Series Kit | 1st Gen Sequoia + Tundra
Original price was: $966.21.$826.00Current price is: $826.00. Read more -
BilsteinShips FREE !!
within 48 US StatesBilstein 47-309975 Front 6112 Series Kit
Original price was: $966.21.$826.00Current price is: $826.00. Read more -
Full Suspension Kits - FJC LateShips FREE !!
within 48 US StatesDobinsons 2.5-3.5″ Extended Travel Pre-Assembled MRA FJ Cruiser Coilovers for 2010-2014
- Suits Toyota FJ Cruiser 2010-2014
- Looking for a quick and easy way to lift your FJ Cruiser? This is your answer
- Select your desired lift height and spring rate – we’ll take care of the rest!!
- Dobinsons MRA are height adjustable by a fully threaded body
- MRA59-A574 – 575mm extended, 420mm compressed
- The Dobinsons MRA Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- Extended Travel – 567mm extended, 417mm compressed
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
- Resi installation instructions
- To run these Extended Travel coilovers, new UCA’s need to be added for proper articulation and correct wheel alignment. A diff drop kit is also recommended to minimize CV binding at full droop
- Link to Matching rear shocks
$1,795.00 Select options -
Full Suspension Kits - GX460Ships FREE !!
within 48 US StatesDobinsons 1-2.5″ Pre-Assembled MRA Coilovers for Lexus GX460
- Suits 2010-2023 Lexus GX460
- Looking for a quick and easy way to lift your GX460? This is your answer
- Select your desired lift height and spring rate – we’ll take care of the rest!!
- Dobinsons MRA are height adjustable by a fully threaded body
- The Dobinsons MRA Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- MRA59-A700 Travel – 560mm extended, 420mm compressed
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
- Resi installation instructions
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle. Adding 2.5″ or more lift, new UCA’s should be added for proper articulation and correct wheel alignment
- Link to Matching rear shocks
$1,795.00 Select options -
Bronco 2021-2024+Ships FREE !!
within 48 US StatesFox Performance Elite Series 2.5″ Rear Coilover Reservoir Pair Adjustable – 2DR Ford Bronco – 883-06-193
- Suits: Rear – Ford Bronco (fullsize) 2021+ 2-Door Models
- Lift Height: 2.5-3.5″ with Sasquatch package, 3.5-4.5″ without Sasquatch package
- Body: 2.5″ Impact extruded and CNC machined 6061-T6 hard anodized aluminum body resists rust over time
- Body Plating: Hard-anodized for a durable finish
- Reservoir: 2.5″ Smooth bore and honed seamless alloy reservoir
- Components: Black-anodized, CNC-machined 6061-T6 billet aluminum
- Spring Application: specific, custom progressive springs
- Shaft: 7/8″ hard chrome plated steel shafts
- Valving: Application specific valving to maximize performance
- Seals: Redundant sealing pack system main seal, wiper seal, scraper seal
- Bearing: PTFE-lined, heat-treated, alloy steel spherical
- Adjustments: Ride height preload ring
- Adjuster Type: DSC – Dual Speed Compression
- Extended: 26.420″
- Compressed: 18.440″
- Travel: 7.980″
- Top Mount: OEM
- Bottom Mount: Bolt
- Includes Reservoir Mounts
- Exploded View Diagram »
- Installation Guide »
$2,399.95 Add to cart -
Bronco 2021-2024+Ships FREE !!
within 48 US StatesFox Performance Elite Series 2.5″ Rear Coilover Reservoir Pair Adjustable – 4DR Ford Bronco – 883-06-196
- Suits: Rear – Ford Bronco (fullsize) 2021+ 4-Door Models
- Lift Height: 2-3″ with Sasquatch package, 3-4″ without Sasquatch package
- Body: 2.5″ Impact extruded and CNC machined 6061-T6 hard anodized aluminum body resists rust over time
- Body Plating: Hard-anodized for a durable finish
- Reservoir: 2.5″ Smooth bore and honed seamless alloy reservoir
- Components: Black-anodized, CNC-machined 6061-T6 billet aluminum
- Spring Application: specific, custom progressive springs
- Shaft: 7/8″ hard chrome plated steel shafts
- Valving: Application specific valving to maximize performance
- Seals: Redundant sealing pack system main seal, wiper seal, scraper seal
- Bearing: PTFE-lined, heat-treated, alloy steel spherical
- Adjustments: Ride height preload ring
- Adjuster Type: DSC – Dual Speed Compression
- Extended: 26.420″
- Compressed: 19.440″
- Travel: 6.980″
- Top Mount: OEM
- Bottom Mount: Bolt
- Includes Reservoir Mounts
- Exploded View Diagram »
- Installation Guide »
$2,399.95 Add to cart -
Bronco 2021-2024+Ships FREE !!
within 48 US StatesFox Performance Elite Series 2.5″ Front Coilover Reservoir Pair Adjustable – 4DR Ford Bronco – 883-06-195
- Suits: Front – Ford Bronco (fullsize) 2021+ 4-Door Models
- Lift Height: 2-3″ with Sasquatch package, 3-4″ without Sasquatch package
- Requires Aftermarket UCA’s for coilover clearance and articulation
- Body: 2.5″ Impact extruded and CNC machined 6061-T6 hard anodized aluminum body resists rust over time
- Body Plating: Hard-anodized for a durable finish
- Reservoir: 2.5″ Smooth bore and honed seamless alloy reservoir
- Components: Black-anodized, CNC-machined 6061-T6 billet aluminum
- Spring Application: specific, custom progressive springs
- Shaft: 7/8″ hard chrome plated steel shafts
- Valving: Application specific valving to maximize performance
- Seals: Redundant sealing pack system main seal, wiper seal, scraper seal
- Bearing: PTFE-lined, heat-treated, alloy steel spherical
- Adjustments: Ride height preload ring
- Adjuster Type: DSC – Dual Speed Compression
- Extended: 23.720″
- Compressed: 17.940″
- Travel: 5.780″
- Top Mount: OEM
- Bottom Mount: Bar Pin
- Includes Reservoir Mounts
- Exploded View Diagram »
- Installation Guide »
$2,399.95 Add to cart -
Bronco 2021-2024+Ships FREE !!
within 48 US StatesFox Performance Elite Series 2.5″ Front Coilover Reservoir Pair Adjustable – 2DR Ford Bronco – 883-06-192
- Suits: Front – Ford Bronco (fullsize) 2021+ 2-Door Models
- Lift Height: 2-3″ with Sasquatch package, 3.5-4.5″ without Sasquatch package
- Requires Aftermarket UCA’s for coilover clearance and articulation
- Body: 2.5″ Impact extruded and CNC machined 6061-T6 hard anodized aluminum body resists rust over time
- Body Plating: Hard-anodized for a durable finish
- Reservoir: 2.5″ Smooth bore and honed seamless alloy reservoir
- Components: Black-anodized, CNC-machined 6061-T6 billet aluminum
- Spring Application: specific, custom progressive springs
- Shaft: 7/8″ hard chrome plated steel shafts
- Valving: Application specific valving to maximize performance
- Seals: Redundant sealing pack system main seal, wiper seal, scraper seal
- Bearing: PTFE-lined, heat-treated, alloy steel spherical
- Adjustments: Ride height preload ring
- Adjuster Type: DSC – Dual Speed Compression
- Extended: 23.720″
- Compressed: 17.940″
- Travel: 5.780″
- Top Mount: OEM
- Bottom Mount: Bar Pin
- Includes Reservoir Mounts
- Exploded View Diagram »
- Installation Guide »
$2,399.95 Add to cart -
FoxShips FREE !!
within 48 US StatesFOX 2.0 Performance Series Coilover IFP Shock – 983-02-051
- Application: Toyota 5th Gen 4Runner 2010-2024 (0-2), Toyota FJ Cruiser 2010-2016 (0-2″), Lexus GX460 (all years) – see full list down below
- Sold Individually – You will need to order 2 for one vehicle
- Preassembled with coil and strut mount – full assembly ready to bolt in
- Coilover comes preset to the taller lift height right out of the box
- Includes a 600LB spring rate coil
- Can not be used with any Dobinsons coils
- Body: 2.0” Impact extruded and CNC machined 6061-T6 clear anodized aluminum one-piece body resists rust over time
- Body Plating: Clear-anodized for a durable finish
- Reservoir: Internal IFP mono-tube reservoir design
- Components: Black-anodized, CNC-machined 6061-T6 billet aluminum
- Shaft: 5/8″ hard chrome plated heat-treated alloy steel
- Piston: Race-developed high-flow piston design
- Valving: Application specific valving to maximize performance
- Seals: Redundant sealing pack system main seal, wiper seal, scraper seal
- Bearing: Large diameter, heavy-duty spherical
- Adjustments: Ride height preload ring
- Extended: 21.775″
- Compressed: 16.600″
- Travel: 5.175″
- Top Mount: OEM
- Bottom Mount: Eyelet
- Installation Guide
- Link to order Fox Spanner Wrench to adjust 2.0 Coil Overs
- Exploded View Diagram
- Warranty Information
- Sold Individually – You will need to order 2 for one vehicle
$549.95 Add to cart -
FoxShips FREE !!
within 48 US StatesFOX 2.0 Performance Series Coilover IFP Shock – 985-02-002
- Application: Toyota Tacoma 2005-2023 (0-2″), Toyota FJ Cruiser 2006-2009 (0-2″), Toyota 4th Gen 4Runner 2003-2009 (0-2) – see full list down below
- Sold Individually – You will need to order 2 for one vehicle
- Preassembled with coil and strut mount – full assembly ready to bolt in
- Coilover comes preset to the taller lift height right out of the box
- Includes a 600LB spring rate coil
- Can not be used with any Dobinsons coils
- Body: 2.0” Impact extruded and CNC machined 6061-T6 clear anodized aluminum one-piece body resists rust over time
- Body Plating: Clear-anodized for a durable finish
- Reservoir: Internal IFP mono-tube reservoir design
- Components: Black-anodized, CNC-machined 6061-T6 billet aluminum
- Shaft: 5/8″ hard chrome plated heat-treated alloy steel
- Piston: Race-developed high-flow piston design
- Valving: Application specific valving to maximize performance
- Seals: Redundant sealing pack system main seal, wiper seal, scraper seal
- Bearing: Large diameter, heavy-duty spherical
- Adjustments: Ride height preload ring
- Extended: 21.190″
- Compressed: 16.600″
- Travel: 4.590″
- Top Mount: OEM
- Bottom Mount: Eyelet
- Installation Guide
- Link to order Fox Spanner Wrench to adjust 2.0 Coil Overs
- Exploded View Diagram
- Warranty Information
- Sold Individually – You will need to order 2 for one vehicle
$549.95 Add to cart